m using redhat 5.3 i have installed a driver for wifi as per my wireless card... i checkd my kernel version , nd it is as per the requirements... but i hve a file name iwl3945.ucode how to install the driver using this file...?
View 3 RepliesI'm having problems while trying to connect to protected wireless network using iwconfig(8).
When I type in:
Things work ONLY if i DON'T input some numbers after the s: but my actual passkey has numbers.
It outputs this as an error:
my configuration(ThinkPad R61i):
When I select the wifi icon on the panel, it just shows "No network devices available". I know my network can be found when I search with my iPhone, so I know there are networks to connect to. So, I checked the drivers, and it informs me that the B43 and STA drivers are not activated. So thats not a big deal, I guess, but when I use my ethernet cord, my laptop doesn't recognize/acknowledge (I'm not sure what the right term would be)it. I'm fairly sure I can't activate these drivers without an internet connection because when I do try, a message pops up saying "failed to fetch" with some long link.
My only guess is that it could be a hardware problem, but I really have no idea. I guess the ethernet problem is my only real problem. Because after I establish and internet connection the the rest is easy to fix.I'm sure its obvious, but I'll go ahead say that I'm a novice ubuntu user. I've only been working with it for about a week, but I'm learning alot.
until yesterday night wireless was working fine on openSUSE 11.2 After a reboot, suddenly wireless is not even shown as a possible network medium. In the network manager, the tab with "wireless" is greyed out.After going through many forum posts, here is what all I have tried.Output from various commands:
Code:
dmesg | grep firmware
[ 7.379074] IBM TrackPoint firmware: 0x0e, buttons: 3/3
[code]....
I guess that driver is not getting loaded since modprobe is giving an error which I mentioned earlier. What could be reason? Did driver crashed? Since this issue cropped up only after I rebooted the machine.
Installed openSUSE 11.3 over an existing 'very stable' 11.2 installation and started experiencing wireless connectivity issues immediately. Network Manager would show connected 100% - 92% but I would lose connectivity to mail, browser and messenger(s). This disconnect would last less than 30 secs but would occur every 2 to 4 minutes.
dmesg reported:
[ 3663.672098] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
[ 3664.101085] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
[ 3664.529050] iwl3945 0000:03:00.0: Failed to get channel info for channel 3 [1]
BTW Channel 3 is the channel my wifi is broadcasting on. I've tried other channels and other computers and it is only openSUSE 11.3 having an issue. I am also using WPA2. Modifying the Global Options in Network Settings from User Controlled with NetworkManager to Traditional Method with ifup seemed to stabilize most of the issues, but I do notice occasional drops. I've also switched from Network Manager to wicd to provide some UI while dealing with this issue. Since iwl3945 drivers are now in the kernel I don't know if I should try to revert to an older driver or if there is another issue.
Does anyone know a way to force a driver activation, or driver install from the command line in recovery mode?Even better, is there a way to force a driver installation from the "(initramfs)" prompt?We're having problems installing the drivers for a PNY GeForce FX 5200 256MB 128-bit DDR PCI Video Card. It goes straight to the "(initramfs)" prompt with the new card installed and, without the card installed it won't allow any drivers to be activated via Administration>Hardware drivers.
View 4 Replies View Relatedafter a brand new 10.0.4-installation on my x86, the system proposes me to activate the nvidia-drivers for my gc - trying this, I get the following bug report:SystemError: Failed to lock /var/cache/apt/archives/lockWhat to do now?
View 3 Replies View RelatedI have a big issue that i can understand (and i didn't find any answers) When i boot, i only have the fullscreen console (tty1 to tty6), which ask me to login.If a try a gedit it says that there is no display. Startx doesn't work neither.
Before this, i tried to update from 10.04 to 10.10, but I had some issues with the update manager. On looked on google for solutions and I tried a couple of those: I updated my source list with maverick ppa, I removed the nvida driver
during advance graphical debian squeeze installation, it displays the following message Detect network hardware Some of your hardware needs non-free firmware files to operate. The firmware can be loaded from removable media, such as a USB stick or floppy.
The missing firmware are: iwlwifi-5000-5.ucode iwlwifi-5000-4.ucode iwlwifi-5000-3.ucode iwlwifi-5000-2.ucode iwlwifi-5000-1.ucode If you have such media available now, insert it, and continue.
I am trying to install ndiswrapper in Fedora in order to install a Windows wireless driver.
Code:
su -c 'yum install kmod-ndiswrapper'
, I get this:
Code:
Loaded plugins: langpacks, presto, refresh-packagekit
[Code]...
Rhythmbox crashed and my radio stations disappeared. I'm not sure if this bears any relation.
I'm using Fedora 14 GNOME. At least until tomorrow when 15 beta comes out Anyway, I'm trying to install drivers for my wireless card. It's a Realtek Semiconductor, RTL8191SEvB. I'm using RTL8192 drivers, which work just fine when I can get them to install. I have all of the necessary files to install it, and they've worked before on a previous Fedora 14 (KDE) install. I cd into the drive and run "sudo make" which gives me the following:
[Code]....
I hope I'm posting in the right forum here, but I'm trying to install a realtek wireless driver and make goes okay, but when I get to make install it says permission denied when trying to create a file in a folder near the end of the process. Is there anyway to fix this? What can I do?
View 2 Replies View RelatedI need some help on my Samsung n150. I have installed Fedora 15 recently and i cant get a few things to work.
1. Wireless wont work ( How to install the wireless driver )
2. Fn Keys dont work ( How do i get them to work )
3. Is there a Software download center in fedora? ( like Ubuntu )
i have dell mini 10 in fedora 13. How i find the wireless driver and install, this the list of hardware:
Quote:
[*******@**** ~]$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GME Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)
[code]...
I have been given an Edimax EW7318USG wireless adaptor,no drivers.I download 2008_0506
_RT73_Linux_STA_Drv1.1.0.1.tar.zip from [URL]..onto my Linux computer using an adaptor from another computer.but cannot find out what to do next:. I have just installed Fedora 11 from a Linux Format magazine DVD.
I wonder how can i get download or firmware of my Acer D150 wireless driver. I've been googling it and they provide by .exe ( i think Fedora doesn't open .exe)
View 9 Replies View RelatedI have built 11.2 on several laptops and knetwork manager startup for wireless is not consistent. I can't figure it out. Sometimes the options "Create Network Connection" and "enable wireless" are greyed out. Other times they are fine. What is the secret to getting the options to appear in my window tray all the time? I always select knetwork manager as the default when I do a clean build.
View 3 Replies View RelatedI don't have a wired connection to internet. I have only a wifi connection. Is there any I could download a driver and install or myself in fedora 14??
View 14 Replies View RelatedCan't get wlan0 working:
In networkmanager the device apears unavailable.
I have a laptop and a Broadcom 4322AG Wireless adapter in it. I am using Fedora 11 64 bit Live. instructions to install and configure my internet connection in Linux. I dont know how to install drivers in linux though I have Got a 64 bit driver from Broadcom Website. In windows, my internet connection doesnt need any password to access. It get connected to internet when I turn on wireless.
View 14 Replies View Relatedi have the cd just do not know how to install the driver for my linksys wireless pci card 14e4:4329the device is BCM43XG
View 4 Replies View RelatedAccording to a help page (Wireless Network Card Installation - openSUSE) I need to use ndiswrapper to install the windows driver for my wireless. However it appears the command 'ndiswrapper' was not installed with the operating system. How can I obtain the package for ndiswrapper and install it? Not being connected to the wifi makes this step tricky
View 1 Replies View RelatedWhen I installed openSuse 11.4 it doesn't see my wireless card Broadcom. How can I install Broadcom wireless driver ?
View 9 Replies View RelatedI have windows vista 32bit oem that originally came with DELL system when I bought new. On the PC, MS$ sticker has the product key for windows vista.When I reformatted the disk and re-install windows vista natively on the machine for which it was licensed, it got automatically activated and passed MS$ genuine check. But I got into problems when using windows vista as guest os from fedora 13 host os using virtualbox on exactly same machine for which vista is licensed for. I go that MS$ : x -days to automatic activation, activate now link. Clicking on activate now it says invalid product key even I entered correct product key as it is on the PC.
I tried to create new windwos vista guest os 2 ways:
1) using existing native installation of windows vista by using vmware converter to create vmware disk image of the running windows vista and shutting down and log back into fedora 13 used this disk image as the storage in virtualbox and create windows vista guest. It starts up ok except for that activation issue.
2) using the windows vista dvd and using that as the source for new windows vista installation in virtualbox. All fine except got that activation issue.After killing my 2 days just for this I dont know whats next. Does that not make sense that I have a license for using windows vista on this specific pc, I am entitled to install it on that same pc as virtual or native or even both ways ?
This link: http://www.zdnet.com/blog/bott/vista-vi icture/360 says starting with service pack 1 MS$ now allows virtual installation of windows oem. My native installation was updated to service pack 2 and I also updated the fresh dvd install of windows vista in virtualbox to service pack 1 and then service pack 2 but still no effect in regard to license activation.Did any one solved the problem in some way regarding this issue for windows vista, I would like to know.
installing the Broadcom Wireless LAN driver. I am working from an HP Pavillion dv6-2 2150us (if that has any relevance). The problem seems to be with the installation method I have used. I burned the ISO file properly onto a CD, but I did not install through the disk boot-up method. The reason for this is because I couldn't partition my HDD correctly (I am trying to dual boot with the Windows 7 OS already installed). So, I installed Ubuntu via the option from the CD Installer through Windows 7. I am not sure how to go about getting and installing the Broadcom Wireless LAN driver onto Ubuntu.
View 1 Replies View RelatedI have Dell Wireless N-card 1520 on my Dell Studio 15 laptop. I have installed Ubuntu10.04 in it. My network card was not able to detect wireless connections. I have even installed 'Windows Wireless Driver' using ndiswrapper. I have latest driver for card. But when i click install .inf file , nothing happens or gets installed.
View 5 Replies View RelatedI have just installed Squeeze on my laptop.
During the first part of the install i was presented with a list of firmware that was needed, 6 iwlwifi items. I was able to install 5 from the one .deb package however one was missing;
iwlwifi-6050-4.ucode and this one is very hard to find.
Can anyone tell me where it is to be found?
i have installed fedora12 in my compaq laptop.i am under proxy..i just gave the local ip address to the laptop..and try to activate the etho device..but ..all the activate,deactivate,delete buttons are grayed out..they are completely looking dead..
View 2 Replies View RelatedI'm trying to get my new Wireless USB dongle to work with Xubuntu 9.10 Karmic Koala. I've extracted the .rar file that was on the drivers CD that came with the dongle. According to the ReadMe....
The Model Name is: RT2870 Wireless Lan Linux Driver Driver Name: rt2870.o/rt2870.ko Hardware: Ralink 802.1n Wireless LAN Card Description: This is a linux device driver for Ralink RT2870 USB ABGN WLAN Card. My issues:
1. I do not see the driver file anywhere in the folder contents... I suppose that I have to "build" it.
2. In the makefile the chipset is default set to "CHIPSET = 3070" & the folder that holds all the extracted files is named 2008_1128_RT3070_Linux_STA_v2.0.1.0 so I'm confused as to whether this dongle has a 2870 or 3070 chipset inside. Does it matter?
3. Sorry, I'm a bit of a n00bster when it comes to all this, but I'm having some problems with the build instructions. It reads:
[Code]...
Using ubuntu 10.10 (pinguy OS) i connected an ethernet cable from my girl's macbook pro to her lenovo ideapad s10-3t to transfer some DS9 episodes onto it. new enough to linux to have not been able to figure out how to access the files on the mac, so i disconnected the ethernet, and the wireless hasn't worked since. tried everything i know, and googling for a while (as well as searching again on this forum) to no avail.
Just before linking the 2 computers via ethernet, the wireless worked fine on the ideapad, always had; but not so after the ethernet connection that did nothing other than apparently kill the wireless. an "lshw -C network" command tells me i have a BCM4313 wireless card, and *-network UNCLAIMED. also, if i launch "install additional drivers", i see that the proprietary driver is not active.
How could merely plugging in an ethernet cable that happened to be conncected to a MBP running OSX.6 do that? and will that happen again? i thought linux was supposed to play real nice with other OS's, so why did a simple file transfer kill my wireless connectivity? i have no access to internet via ethernet cable, so i cannot just download the driver i need now. shouldn't it still be in the computer still? somewhere? is there a simple solution to this, or has the wireless driver been wiped out by plugging in the ethernet? is this a bug that should be reported?