I have a RT8187B wireless card in my notebook. When I turn ON my wifi and connect in a TP-Link router, after -+ 30 min, the notebook power off. It's not like shutdown. It's like the power (battery and power adapter) was removed: everything stops working immediately and erases (like a blackout when we don't have a battery). When I'm using my ethernet all things works pretty good.
View 7 RepliesMy name is Dieter, from Belgium, new here. I installed suse 11.2 from the dvd. I bought a wificard that is supported under linux for this pc. Still my firefox does not connect to the internet. I set up the card in yast to dhcp. I find networks and can connect to them but that's where the story ends. This is some data, sorry for the layout, I have no experience in posting stuff in fora.figure out why i cannot connect to the internet?
[Code]...
I know about ubuntu. Not debian.I have installed debian 8 64bit on a notebook mainboard vga display only.During installation vga display worked. After restarting the lock up crypt hdd shows. After that debian login screen should show. It does not. Only the pointer shows.If I put the hdd in another note book, the debian login screen shows on the notebook's display. I then connect the vga display.
Then I can select settings, displays and mirror debian gui and gui will show on both displays. After restarting the notebook both displays show the debian gui. If I then put the hdd into the notebook mainboard, then the vga display will not show the debian login screen. The pointer shows. On ubuntu settings, displays, general option, I can set all displays. That option is not in debian 8. How do I get debian 8 to show the debian 8 login screen on the notebook mainboard vga display only computer?
I'm using debian testing on my Asus UX305. When my laptop is connected to power, the power notification still shows "discharging". And The battery part of the laptop feels unusually hot.
while connected to power, "acpi -b" gives me this information: Battery 0: Discharging, 98%, discharging at zero rate - will never fully discharge.
This problem was reported by some ubuntu users too: [URL] ....
I trying to connect my linux machine( kernal 2.6)with a D-Link WBR-1310 router (Firmware fully updated). Internet was working on the computer when it was connected to other network. DLink is DHCP Server enabled. The XP boxes had no problem connecting to the internet automatically. My linux box was having trouble (absolutely no network detection.) on D link and port of linux lights are green. for the Wired Connection I set the configuration to Automatic Configuration (DHCP). I was unable to ping my router at 192.168.0.1 (Destination Host Unreachable).I'm not sure what to do, but I suspect it may be the DHCP client settings.
View 1 Replies View RelatedI am unable to get my intel pro/wireless 3945abg connected to my router. The firmware has been installed and at first was even able to connect, but now the access point doesn't even show up in network manager. I am currently able to connect using a USB wireless adapter, but for certain reasons, would prefer to use the former. I've looked over this page with no results.
View 7 Replies View RelatedI've bought an Acer Aspire 5810T(imeline),I notice after installation of opensuse 11.2 that network-manager has been installed by default probably because my laptop computer is containing a wireless device.I only want my computer using ethernet (with the cable) and so want to know which methods exist to shut down as securely as possible wireless to avoid any missuse activity
Is there any possibility to shutdown traffic by locking with a password?I do not have any wifi relay or antenna at home but want to avoid any relay in my neighbourhood from getting into my computer.
I'm having this problem, when I close the top of my notebook and later re open I find that my wireless connection got disconnected, which is very annoying since I can't make large downloads...(I'm on OpenSuse 11.3)
View 1 Replies View RelatedI had Xubuntu 9.10 installed on my computer and everything worked fine, i could download and surf the net pretty fast, but all of a sudden i couldn't do this anymore. The adapter was still connected to the network but when i opened firefox it worked for 5 seconds and then it would not load any pages, and even synaptic couldn't download any packages, even though it was still connected to the network. So i tried to reinstall network manager but it didn't work, then something happened and i couldn't access my Xubuntu anymore so I decided to delete the partition and install Xubuntu 10.04. I still have the same problem. What should i do? I am sure it is not a problem with the adapter because it works on the Windows partition.
View 6 Replies View RelatedMy router/adsl modem is not connected to a power supply so when power goes and comes the network will do a re-boot. Now the problem is my OpenSUSE network won't come back on! I set the static ip as Autoeth0 to eth0 however when network updates I losse eth0. Why is this happening? Why doesn't the PC simply re-connect? Can I do it via command line?
View 5 Replies View RelatedI use Squeeze with Xfce. My problem is that recently (after the xfce updates) the xfce power manager doesnt react to the power button - it is set to suspend. I dont have gnome-power manager or anything like it running.
If i reboot the computer, the power button will work but if i suspend and resume, it doesnt work again.
The computer is built on an Asus M3N78-VM mobo (2GB RAM/Athlon3200+ single core).
acpi_listen detects the button press.
Any thoughts?
So let's get to my question. I have two notebooks, but one of them don't work without a battery. So I want to use it like a wifi router for the other one. On the broken one I've installed openSUSE 11.3 and plugged the LAN cable. So now it has Internet. My question is how to create a WLAN and use it like a router
View 9 Replies View RelatedMy grandson is now running on Ubuntu, but I tried an upteem dozen times to get it to install and have Wireless working, and two times the light went from orange to blue, but some later problem caused me to do the install over, and when I did that, I would lose the wireless mode. And every attempt I made with the Network settings under System/Preferences or System/Administration did not help.
Now I wrote here about my long effort getting wireless going in my own L355-S7915 Toshiba notebook, and how I finally beat it without actually knowing what I did that finally got through, but that won't work on this HP G60-630US model. Fact is, HP doesn't neven name the motherboard or the chipset, or the Wireless Adapter involved. I keep searching for more specific language, but nothing turns up.
If anybody has found a way to beat this thing, I sure would like to know about it. One thing I remember doing was using wicd in place of Network Manager at one point, and it really did work better on my machine, but I can't find wicd as something I can install now with the newer versions of Ubuntu. So far I have tried 9.04, 9.10, 10.04 LTS, and 10.10, and my sone is presently making his first shot at Ubuntu using 9.04 64-bit version. Still no wireless. If it shows up in a screen menu, and it doesn't always, it will be grayed out and might show that it is disconnected, and I don't know how to connect it.
Any help would be much appreciated. Again, this is an HP G60-630US laptop I am dealing with here, and stuff I went thru way back then has gotten lost in the midst of my 69 year old collection of memories. I went back through what I wrote then, but it is not a match to what I am dealing with now.
I always have been a windows user and my brother decided to install Ubuntu 10.10 on my laptop, before he completed the full installation so I could use my wireless card. I have been reading various posts for the last two days and i am none the wiser. I have a linksys wireless G notebook WPC54G Ver.5. I have the software (drivers) for the card saved on my machine and have also installed NDISWrapper?
View 3 Replies View RelatedI have been all over the internet trying to find a wireless adapter that will work with my older Toshiba notebook. I have several but none seem to be recognized. I am willing to purchase one and I would like it to work out of the box.
View 12 Replies View RelatedI have gotten this to work on Xubuntu here: [SOLVED] Ndiswrapper? Does it work? - Ubuntu Forums.I think it would use the same software/firmware? I am using OpenSUSE 11.4 LXDE derivative.
View 4 Replies View RelatedI recently bought a D-Link DIR-655 router capable of 802.11n operation, upgrading from a DIR-624 router only capable of 802.11g operation. While my overall setup uses wired connections, other people in the house prefer wireless, and the upgrade was undertaken more for a hoped for increase in wireless range, rather than the possibility of increased speed, since the router is located to accommodate the wired connections. However, to test the 802.11n operation I bought a D-Link DWA-130 USB dongle for my now 5-year old laptop, which comes with an otherwise satisfactory 100Mbs ethernet port(eth1) and an 802.11g wireless card(eth0). By checking the dmesg | grep firmware output after I plugged in the dongle I determined that the necessary firmware was rtl8192sfw.bin, which I found on the web, and downloaded into the directory /lib/RTL8192SU.
A subsequent reboot and then YaST > Network Devices > Network Settings showed the device as wlan0, but not configured. I changed the Network Setup Method to ifup (since I can see no way to do a device configuration in Network Manager), and configured the device, and at the same time deleted the configuration for the existing 802.11g wireless card(eth0). I then rebooted, went back into YaST to confirm the wlan0 device was configured and the 802.11g device (eth0) was not, changed the Network Setup Method back to Network Manager, rebooted again. Making sure that the router was set to only transmit/receive using 802.11n I then typed iwlist scan. To my surprise, the output showed first that the supposedly unconfigured eth0 device seemed to be still active, for it found my home network, and claimed that the protocol used was 802.11g. On the other hand, the newly configured wlan0 device produced the message: "Interface doesn't support scanning: Network is down".
First, should I expect iwlist scan to work for a device that shows as unconfigured? And even if it should work, shouldn't it show 802.11n as the protocol, assuming that the router is in fact telling the truth? Is there any independent means to determine if the router is only using 802.11n as it claims? Second, the overall goal is to make the wireless network in the house 802,11n only, and since the dongle is backward compatible with 802.11g, I would expect to permanently unconfigure the eth0 device and use the dongle, both here and on the road. I do not need two wireless connections on my laptopThe laptop is running SuSE 11.2 as of about a month ago. Some relevant(I hope) command line output:siracusa:~ # uname -aLinux siracusa 2.6.31.12-0.2-desktop #1 SMP PREEMPT 2010-03-16 21:25:39 +0100 i686 i686 i386 GNU/LinuxUSB Information
siracusa:~ # lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 002: ID 2001:3301 D-Link Corp. [hex]
[code]....
wireless not working in Samsung notebook RC520
View 5 Replies View RelatedLooking for driver for Linksys Wireless Notebook adapter WPC55AG
View 1 Replies View RelatedI am unable to access wireless network from my notebook. My configuration is Dell i5, 4GB RAM and 1397 W-LAN and I have F13. I can still access Internet through Ethernet using a LAN cable but the network monitor doesn't show list of Wireless networks which my room mate's windows 7 machine easily detects.
If anyone needs more info please provide me the steps to perform to find that out
I have a bluetooth-enabled notebook and I used to eventually turn on/off the wireless switch, which disabled wi-fi and bluetooth capabilities.Recently I turned on the switch to find the bluetooth icon missing from the Notifications area at the panel. When I type bluetooth-properties at the terminal a windows pops up saying "Your computer does not have any Bluetooth adapters plugged in." No further hardware/software changes were made recently.
View 1 Replies View RelatedI am an amateur with opensuse and i have installed 11.3 today i cannot get the wireless to work it just wont even show as connected or even detected
Running opensuse 11.3 acer aspire 5520 laptop- can get a WIRED connection
/sbin/lspci= Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01) = Ethernet controller: nVidia Corporation MCP67 Ethernet (rev a2)
/> /sbin/lspci -nnv | grep 14e4
05:00.0 Network controller [0280]: Broadcom Corporation BCM4311 802.11b/g WLAN [14e4:4311] (rev 01)
[Code]....
Assuming I was connected fully to a wireless network, the icon should have a check mark or something instead of a shitty "!" mark. It's horrible, is this supposted to happen?
View 4 Replies View RelatedI got installed debian 6.0.1a en my compaq presario 1255 (amd-k6 with 160 Mb and 4.3 Gig), but I had to use expert install to be able to select lilo instead of grub2. I ended with a very basic system (it only uses 8Mb in console mode, and 28 Mb in fluxbox plus an xterm). It is still a very usable machine.
Previousy, I was able to install lenny 5.0.8 just with normal console mode install
I think that with lenny, the fan of the notebook (I mean the "external" one, I do not know if there is another in the micro) some times was on. but i do not think it works at any moment now with wheezy
I have been googling a couple of hours, but I am not getting a clear idea about fan and notebooks.
What have I to check? is it a module? something related to acpi?
My notebook seems to just freeze once in a while sometimes once a week, sometimes once in two weeks, sometimes once in two consecutive days. I cannot for the love of it narrow it down to anything. Granted, I have not followed the logs, but doing so for the first time gave no real results either.
View 5 Replies View RelatedI try install debian squeeze or sid to my notebook acer aspire timeline X 5820tI try mini iso and netinstall but isntallation not detect eth0 (Atheros AR8151 PCI-E gigabit ethernet) wlan0(Atheros 5B93 wirelles network adapter) is detected but not working.I try DVD http://cdimage.debian.org/cdimage/weekl ... -DVD-1.isourning is OK, but on boot edd: not reed sector and long numberError not configured file found or ......md5of burn dvd is ok, i burn it 2x, K3B, Brasero, burning is complete, check of burning files too but, not boot (I try boot on my desktop PC and its OK, but on notebook dvd not boot.
View 2 Replies View RelatedHardware: Notebook
OS: Debian 6.0.1, installed very recently
goal: access vista windows shares in my home network
What would keep changing the domain to "lan" in network settings on my Debian notebook? I've tried launching network-admin from a root terminal, made changes, but after rebooting it reverts back to "lan". Perhaps it's irrelevant, but maybe it's the reason I can't see any other PCs when I try to browse the network.
Installed samba, but that seems more for setting up a share, than trying to access existing shares. At any rate, it did not solve anything.
Weird though, because immediately after I installed Debian, I was able to browse the network successfully. I've only installed zsnes and debian updates since then. I also installed the Broadcom firmware/driver needed for wireless today, but my network browsing problem existed prior to that.
There is no sound on my Debian notebook.I added myself to "audio" group and have "alsa-utils", "pulseaudio", and "firmware-linux" packages installed.
However when I try to play an audio file there is no sound regardless of volume settings.
Code: Select all386,0,0>pthfdr@SALAMAND:/media/pthfdr/SORCNYTH/Media/Audio/Disc 1$ play -V4 01.(I Can't Get No) Satisfaction.mp3
play DBUG formats: opening format plugin `lsx_alsa_format_fn': library 0xc3a680, entry point 0x7f9d270ea8e0
play DBUG formats: opening format plugin `lsx_amr_nb_format_fn': library 0xc3bde0, entry point 0x7f9d269e6690
play DBUG formats: opening format plugin `lsx_amr_wb_format_fn': library 0xc3cb80, entry point 0x7f9d265b81a0
[ode]....
The machine I'm running is a Sony Vaio VPCCW290X notebookIntel Core i5 processorNvidia GeForce 310M video cardI am planning on making Debian my main OS but I am experimenting with installing it on a usb drive first. I am new to linux so this has been a learning experience so far. I finally got the grub installed correctly for the external hard drive to boot up into Debian. I installed the minimal network install so I should just be going to a console prompt. After booting it it goes for a short time and then the screen shuts off, not just black. I tried ctrl-alt-f1/f2 which didn't do anything. I am able to reboot by ctrl-alt-del though. If I try to boot into the second option it goes further before shutting off. Using a live cd it does the same thing unless I choose the fail-safe option. When I choose that it boots up correctly. If I hook up an external monitor it will switch over to it when the screen shuts off, so I know it's not the video card
View 1 Replies View RelatedThe top row of keys on my notebook are currently assigned to various media functions (brightness, volume, play, stop, etc.) These keys are rarely used, and it would be better if they were assigned to the function keys (f1,f2,f3,...) by default, rather then using the fn key to access them. Locking the fn key down is not an option. What can I do?
View 2 Replies View Related