Debian Hardware :: Uninstalled Video Card - Can't Use Motherboard Graphics Now
Aug 23, 2014
My computer boots up, grub loads up, but I enter tty1 instead of the desktop environment.
I am using Debain GNU/Linux 7.0 (wheezy).
My mother board is an ASUS M4A88T-M.
Former graphics card was a Radeon, bought within the past couple years, pretty high specs. (I am having trouble determining what the card is right now, I'll update my post when I figure it out).
I remember having to mess around with some config files to get it to work at first, but right now how to 'unfix' it now.
View 1 Replies
ADVERTISEMENT
May 2, 2010
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
View 1 Replies
View Related
Jul 7, 2011
I have a dvd player motherboard which includes an ide port and audio video outputs.
I wanted to if there is a hack to connect the ide port ( or sata with convertor) to a hardware containing an embedded linux OS so as to use the dvd player motherboard as a graphics card.
View 2 Replies
View Related
May 23, 2010
I just lost my weekend trying to install Xubuntu 10.04 on my pc I made the ps a while back - its built on a ASUS P4S800D-E motherboard and it has an ATI Radeon 9200 LE graphics card. It has a PS/2 keyboard and mouse, 1Gb of memory and a 160Gb PATA/IDE hard drive (I unplugged the SATA drives) Every time I installed or made a tweak to the config it failed in the same way. It showed its failure by continually repeating the first character typed. Regardless of whether this was the password screen for synaptic or just the first character typed into a terminal. Until the first character was typed the mouse seemed to work ok but then it would stall too
I've tried most things, running Xorg with/without an xorg.conf file, loading the ppa kernel and tweaking loads of bios and grub boot parameters all to no avail. So I think I want a more linux friendly graphics card and I fear I may need a new motherboard. Can someone recommend a replacement graphics card for this motherboard? Can anyone reassure me that my motherboard is ok with linux?
View 1 Replies
View Related
Jun 20, 2010
System:
Fedora 12
Motherboard: ASUS A8V-XE (Socket 939)
CPU: AMD Athlon 64 3500+
Memory: DDR 400 184 pin (PSD1G400KM)--two sticks, 1 GB each
Much to my consternation, my video card blew a few capacitors. A local computer shop said that they tried a working PCI Express card, and the video was still not working, so they concluded the PCI Express slot was damaged as well. However, they also tried an older model video card that uses the PCI slots, and everything worked. So I ordered a new video PCI video card. It's on its way (Amazon). However, in the meantime I had a 1997-vintage video card sitting around, so when I got the computer back, I tried it. No signal to the monitor, not even motherboard booting beeps. Nothing. I called the shop back. He said even though my old card fit the PCI slot, new changes might have made it incompatible (16 vs. 32 bit, etc.). Anyway, even when I take the card out and boot, no beeps. That makes me wonder whether the old card did something, and now the motherboard is damaged beyond use. The man at the shop said the possible incompatibility of the old card should not have damaged the motherboard. Instead, he suggested that once a part of the motherboard is damaged (and we know the PCI Express slot is damaged), the motherboard as a whole can start acting erratically. However, it was beeping at the shop; now it is not.
I'm hoping those on this forum more knowledgeable about hardware than I am can give me some advice on the following questions.
(1) Does everything the shop did and said sound reasonable and likely?
(2) When my new PCI video card arrives from Amazon, if the computer still will not boot or even beep, does this prove I need a new motherboard?
(3) Is there any chance the motherboard could damage the new video card?
(4) Biggest issue: If I need a new motherboard, should I try to find one that accepts the same CPU and memory sticks? So far, I haven't been able to find one online. Or should I bite the bullet and get a new CPU and memory to match the new motherboard?
(5) If I get a new motherboard, new CPU, and new memory, can you suggest some possibilities of what I should look for? I don't want low-end, but for the work I do, I don't need really high-end, state-of-the-art either. I don't play computer games.
View 14 Replies
View Related
Jun 24, 2010
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
View 3 Replies
View Related
Mar 20, 2010
i just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies
View Related
Feb 2, 2010
I'm a Ubuntu Karmic Koala (9.10) user.Everytime I start Ubuntu up, before the login screen, I get a message that there's something wrong with the graphics or videocard, telling me that I'd have to run Ubuntu in low-resolution. Okay, fine, log-in screen, I log in. The wallpaper loads. That's all that loads. No panels at all, no desktop icons, nothing. Alt + F2 doesn't work and I strongly fear that I'd have to reinstall Ubuntu, and that's a great loss to all my files. I currently can't afford external memory and I don't have external memory in possession.
View 1 Replies
View Related
Apr 17, 2010
I was having trouble getting X.Org to work with the video card in a recently acquired laptop, so I decided to try to probe around the configuration of a Linux Live CD to figure out how to set up my kernel. I chose the Sabayon 5.0 Live DVD because it was the only one that I could find that was the same or newer than the 2.6.32 kernel I have installed on the laptop right now. Of course, the DVD booted right into GNOME without issue, unlike the hangs and crashes that I had been getting. So, I want to figure out what kernel driver this Live DVD is currently using, but I don't know how to. hwinfo doesn't shed any light on the matter, and lspci -vnn doesn't list a driver for my video device, though both methods correctly identify that I have an Intel 855GM video processor. How can I find out this information?
View 1 Replies
View Related
Jul 20, 2010
I bought a Mini ITX motherboard Intel DH57JG bu the installation DEBIAN does not recognize the ethernet card.
View 9 Replies
View Related
Sep 5, 2011
I just bought a new graphics card and installed it. it works perfectly although my sound worked perfectly this morning and I think the graphics card is overriding my built in sound card. I need help fixing the sound. The graphics card I bought is an ATI Radeon Cedar HD 5450 The sound I want to use is HDA VIA VT82xx
when I run alsamixer I get Card:
HD-Audio Generic
Chip: ATI R6xx HDMI
[Code]....
View 3 Replies
View Related
Apr 15, 2010
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies
View Related
Feb 16, 2010
Now I have never done this "Overclocking" stuff, It seems like it would be of great use. My laptop isn't in any way good in those departments. Thus I want to try and upgrade them, the cheap way.
View 8 Replies
View Related
Dec 27, 2009
From what I've read there is no problem running one nvidia card on a crossfire motherboard, but not much information running two cards.Some context: I currently have a Core 2 Duo on a motherboard with an nForce chipset supporting SLI. I have 2 nVidia 9400 graphics cards not in SLI mode driving my 3 monitors.I'm toying with the idea of upgrading the CPU and motherboard (maybe the RAM if I go for DDR3), and am leaning (back) towards the AMD camp, however most of the motherboards for AMD CPUs that have 2 PCIe x16 slots also have Crossfire.
View 4 Replies
View Related
Mar 30, 2011
I can't install my graphics card Radeon HD 3200, I use the same driver as I always do. But this time it did not work, it boots with an X error and I can't get into gnome.
Here is the Xorg log.
X.Org X Server 1.7.7
Release Date: 2010-05-04
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.32.29-dsa-ia32 i686 Debian
[Code].....
View 6 Replies
View Related
Jun 12, 2011
I have two graphics cards in my computer. One is a crappy built-in nVidia GeForce 6150 SE, and the other is a high-end (as of 2008) GeForce in the 8000 range. I would like to use the latter, but I can't get anything to detect it. Testing which is in operation is easy: they have separate video outputs. I've tried changing the BIOS settings, but to no avail. I'm stumped. Could it be that my other card is dead? How could I test it? I'm fairly certain that it worked back when I used Windows, as I remember having to use my DVI-to-VGA converter (the other card's outputs are all DVI).
View 3 Replies
View Related
Oct 25, 2010
I've replaced the Motherboard on a working Debian Lenny system but GDM does t come up: the grey screen merely displays with a wristwatch in the middle.I can find no messages. Running dpkg-reconfigure xserver-xorg and Xorg -configure don't help.
View 4 Replies
View Related
May 1, 2010
I told a friend of mine that "Linux" would revitalize his aging laptop I installed - dare I mention this heretical word on this forum, Ubuntu - on a friend's AIRIS laptop some time ago. He is a completely non-technical user so I thought he'd find it easier to use the "compassionate distro for human beings" but my ulterior motive was simply to get the thing up and running without spending hours of unpaid configuration; however, no such luck and hardly a week goes by without a telephone call. One pays for ones sins. The main problem was buggy booting and random freezes. The graphics card is a Intel Corporation 82845G/GL[Brookdale-G] and after the latest update it can take several boots and hard resets. I'm really getting fed up with it and am considering installing Debian which is probably what I should have done in the first place. From what I've read about this graphics card, the prognostic may be pessimistic.
View 6 Replies
View Related
Jun 7, 2015
I am tryint to install Debian Jessie on my desktop.My system configuration are:
Processor:- i7 4790k
motherboard:- Z97X-UD3H-BK-CF
ram:- 4GB DDR3
graphics card:- AMD radeon R9 200 series.
I am trying to dual boot here (Debian and Windows 7).I am trying to setup server here (trying my hands on first time.)I am getting the following error on the screen when i select to boot from Debian (windows boots up normally when selected in grub) I have attached the image,it states:-Radeon kernel modesetting for r600 or later requires firmware-linux-nonfree
View 14 Replies
View Related
Jul 4, 2010
I'm going about my ways to get my drivers installed for my graphics card, but the page I'm using, URL>..has me apt-get install "nvidia-kernel-common".Synaptic says it doesn't exist, and it appears to be a pretty important package to have. So is there a way for somebody to get that online for me to install?
View 5 Replies
View Related
Apr 27, 2011
I installed the powerpc version of Debian Squeeze 6.0.1a on an eMac. According to the Wikipedia article, these systems had an nVidia geforce2 MX graphics card, and the system is using the Debian open nVidia drivers from install. I've gotten everything working on it, except the graphics are off. It's acting like either it can't handle the resolution or all the colors and looks a little like it wants to run in 256 colors. It's not unusable, just annoying. I know that it can handle a normal resolution because it was doing fine under Mac OS X puma before I wiped it and installed debian (I put debian on it because I needed a modern web browser, and the ones available under that version of Mac OS X weren't doing the job). I went to the nVidia website, but they only have the driver for x86 Linux. I need it for the G4 powerpc. Any ideas? I'm used to running Ubuntu on x86 machines, so the powerpc thing is throwing me a bit.
View 4 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Sep 13, 2010
I have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.
I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.
I thought it may be the same problem as this:[url]
But I have tried following the bug fixes on that site and I have had no luck.
lspci
Xorg.0.log
View 1 Replies
View Related
Jul 10, 2010
I've been using ubuntu on a new desktop for a couple of months, but i had an old HP that was given to me in my basement. It has 384Mb of ram, and thats because i had a 256Mb stick laying around. I installed debian becuase it is more suited for older hardware (at least from what I've read). It installed fine, but it boots to a blank screen, and pressing ctrl+alt+F2 bring me to the command line. I checked /etc/X11/xorg.conf to change the driver to vesa, to find out my video card isn't even shown. I ran lspci and I found that it says my graphics card is Intel Corporation 82810E DC-133 (CGC) Chipset graphics controller (rev3) In the device section of xorg.conf, it merly says Identifier"Configured Video Device"
View 12 Replies
View Related
Jul 11, 2014
I've set up this new PC, the graphic card I picked is the ATI R7 260X, pretty good card with lots of core processors, high clock and 2GB memory. I'm now currently using the 14.4 catalyst drive, it works actually alright, though, there are some mishaps with this driver:
First my hdmi screen had scale down, leaving black borders around, even though the catalyst control said the correct native resolution, this turned out to be a underscan that fglrx does and I've finally managed to fix it. Other caveat is that the screen simply won't suspend or turn off( via software), DPMS actually works, forcing it turns the screen blank for some seconds but something does not allow the screen to sleep.
Performance wise it seems pretty good though, everything is pretty smooth, being able to play games maxed out on resolution and ultra settings, though, I still haven't tested out that many games.
The open-source radeon on the other hand, well its open-source, fully xorg and linux compatible, which is a major plus point. It seem it has come a long way, supporting lot of features and providing better performance in some cases.
Before installing Catalyst I had issues with mesa and steam, steam would complain about not finding the 32bit libraries, this is however a steam runtime issue, maybe it could already be fixed.
View 1 Replies
View Related
Sep 5, 2015
I'm running hardware already considered legacy and I was made painfully aware that those drivers, for ATI cards, are only available from Jessie repositories; yet, somehow I was able to have my system configured to run not the stock drivers the system used for installation but, allegedly, proprietary drivers.
I did notice an overall improvement on how the system displays everything on the screen but after fumbling around the system trying to install a game I had a message warning that only software acceleration was activated and not full hardware acceleration, which was what I was aiming at.
After going through a lot of guides on the web I was able to:
a) discover the system is running MESA drivers (or so I have understood)
b) install headers for my system but somehow along the way I fumbled whatever I was doing and I probably now have a lot of loose ends in the system
Being Debian (and rock solid) the system is still running smoothly but I really want to clean up after myself and correct what I can and improve where is possible.
View 3 Replies
View Related
Jan 17, 2011
My old motherboard (biostar tp35d2-a7) died. I got a new intel h67 motherboard and installed an i5-2400 in it, and tried to boot off of the debian testing install that is on the hard drive, and which worked with the old hardware. (Old system had nvidia graphics.) It doesn't entirely work with the new hardware, however. I don't have ethernet and something is wrong with video, so X doesn't start.
To check hardware function and linux compatibility I booted Knoppix, and both networking and graphics are working properly. How should I go about fixing the installed OS to work with the new hardware? Do I just need to totally reinstall? Or is there some way to add drivers or reconfigure so that the existing OS will work properly?
View 14 Replies
View Related
Oct 4, 2010
I have Foxconn motherboard 750/760A01.I install ubuntu and have problems whit driver for motherboard. When I search in net i saw that Foxconn have problems whit linox . how to install my Lan Card drivers, i cant find them in web. Now on Ubuntu i don't have any drivers for motherboard.
View 1 Replies
View Related
Oct 3, 2015
How do you check if a computer's video card will support Kernel Mode Switching BEFORE OS installation?
In this example I have an Acer Aspire AST180-UA381B.
Manufacture website says my video card is: Integrated nVidia MCP61
[URL] ....
Nouveau code list says: NV4C (MCP61) GeForce 6150LE / nForce 400/405, GeForce 6150SE Quadro NVS 210s / nForce 430
[URL] ....
I want to know:
1. How to tell if my graphics card will support KMS before I install the OS?
2. If it does not support KMS which kernel options should be passed to get it to work properly with the nouveau driver?
3. Ultimately I am looking for a tool that should be included in the installation screen that will:
a. identify your hardware: list the hardware detected on the screen
b. highlight with color code any hardware listed that is not supported or poorly supported: in this case graphics drivers
c. perform a quick benchmark test of your hardware: In this case I want the benchmark to tell me what capabilities my graphics card has.
d. automatically recommend and set the best kernel parameters for a successful boot: if the graphics card needs nomodeset or modeset=0 or whatever I want it to do it for me.
Also I started a personal blog about this issue which I intend to compose into guide to assist others with this question. [URL] ....
My goal is to create a boot disc that will automate proper installation of graphics or other hardware for a system BEFORE installation. I would like to see this feature included in the Debian installation screen.
View 14 Replies
View Related
