Debian :: How To Check If Video Card Supports KMS
Oct 3, 2015
How do you check if a computer's video card will support Kernel Mode Switching BEFORE OS installation?
In this example I have an Acer Aspire AST180-UA381B.
Manufacture website says my video card is: Integrated nVidia MCP61
[URL] ....
Nouveau code list says: NV4C (MCP61) GeForce 6150LE / nForce 400/405, GeForce 6150SE Quadro NVS 210s / nForce 430
[URL] ....
I want to know:
1. How to tell if my graphics card will support KMS before I install the OS?
2. If it does not support KMS which kernel options should be passed to get it to work properly with the nouveau driver?
3. Ultimately I am looking for a tool that should be included in the installation screen that will:
a. identify your hardware: list the hardware detected on the screen
b. highlight with color code any hardware listed that is not supported or poorly supported: in this case graphics drivers
c. perform a quick benchmark test of your hardware: In this case I want the benchmark to tell me what capabilities my graphics card has.
d. automatically recommend and set the best kernel parameters for a successful boot: if the graphics card needs nomodeset or modeset=0 or whatever I want it to do it for me.
Also I started a personal blog about this issue which I intend to compose into guide to assist others with this question. [URL] ....
My goal is to create a boot disc that will automate proper installation of graphics or other hardware for a system BEFORE installation. I would like to see this feature included in the Debian installation screen.
View 14 Replies
ADVERTISEMENT
Jun 8, 2010
With what command i can check whether my Ethernet card supports gigabit speed Ethernet or not?
View 1 Replies
View Related
Nov 5, 2010
Out of curiosity, in linux, how do we check:
- The make/type of ethernet card
- The wireless chipset
- The video card
Used in a computer?
View 3 Replies
View Related
Jun 1, 2010
My motherboard supports SATA but I do not know which version: SATA-I or SATA-II. I want to buy a SSD so it would be pointless to buy a fast SSD if my motherboard only suports SATA-I
View 7 Replies
View Related
Aug 14, 2010
I have a GeForce 8600M GS card in a Dell Vostro 1710, which has appeared to be playing up lately, but I'm unsure whether it's the hardware itself or have I not properly set things up.
I have Ubuntu 10.04 installed with compiz, and 'rotate cube' enabled. The 'deformation' is set to cylinder. I recently tried using rss-glx (really slick screensaver) when the slow-down and screen freezes happened.
The symptoms:
Odd behaviour begins after attempting to log in after the screensaver has blanked the screen, i.e. screensaver ran for a while then the screen blanked. When logged back in, a 'cylinder' rotate freezes and the screen does not refresh. Clicking around the screen refreshes it somewhat. Switching between screens becomes next to impossible and a restart is required.
In general rotating the cube is OK, rotating the cylinder seems a task on the video card and rotating the sphere is horribly slow.
Things done so far:
Each time I log in, I need to open the NVidia settings and change the powermizer to 'prefer maximum performance'. On next reboot I will try this in xorg.conf code...
My questions are:
- How can I verify the card is working correctly, enough to be able to decide whether it's hardware or software at fault?
- If the hardware is proven to be OK, what am I then leaving out?
View 5 Replies
View Related
Feb 16, 2010
How do I check what video driver I have installed in the terminal? Then how do I install or yum install it? I wanna do everything through command line soz.. I have an ATI 4850 I believe.
View 2 Replies
View Related
Feb 19, 2010
I'm trying to figure out whether my system supports PCI Express without opening up the box. lspci doesn't mention "Express" or "PCI-e" anywhere, but dmesg reports that a "PCI Express Hot Plug Controller Driver" is in use.
View 3 Replies
View Related
May 18, 2010
want to know enable 32-bit IO-support on my hard driveusing hdparm . But before I enable 32-bit support , I want to knowwhether my hard drive supports 32-bit IO or not. I tried the -I option with hdparm , but it is not telling clearlywhether it supports 32-bit or not. The following is the output from the hard drive of my system (hdparm -I ) .
=====
Commands/features:
Enabled Supported:
[code]...
View 1 Replies
View Related
Apr 24, 2011
I have use windows for a long time and now I want to get linux .
I will like a easy to use frendly GUI that supports multimedia and video editing.
One that has alot of support and works well with other software and hardware.
View 14 Replies
View Related
Aug 3, 2011
Get some recommendations for a Linux Wireless card for a laptop that supports 5 ghz?
View 2 Replies
View Related
Jan 18, 2010
my servers cpu gets woken up alot (acording to powertop) by eth0 when downloading files, i figured i could get a cheap pci card that supports offloading.
View 4 Replies
View Related
Jan 4, 2016
I knew this would eventually happen, though I had to remove my NVIDIA video card after the fan went out (again) & the card burned out.Now I can't get the machine to boot to GUI.I tried some things, though nothing was specific to such a simple & routine task (I imagine video cards go out occasionally, & with Linux, that would require totally different video settings).
View 2 Replies
View Related
Feb 1, 2010
I installed a video card called ASUS EAH 4550 and installed the ATI drivers necessary for this video card. The problem is this, I current have two users using Debian. I have done all the necessary configurations via x.org and User 1 has no problem accessing GNome with Compiz as the window manager. However, if user 2 was to log in the same way as user 1 (through startx) the screen does not boot up Gnome but instead the screen powers off into standby mode. I've also tried creating a third user and the same thing occurs.
Currently I am typing through User 1 with no problem but additional users for some reason can not get a desktop screen.
View 5 Replies
View Related
Jun 23, 2011
I was installing Debian Squeeze into a G5 with an Nvidia Geforce FX 5200 ultra video card. The install went well but the system would not display any output. I did some research looking into the module configuration files in the /etc directory and dmesg log files and discovered that it was incorrectly identifying the video card as a "nouveau" card. I put the name "nouveau" in the modprobe.d blacklist file and it booted fine after that.
View 1 Replies
View Related
Jul 15, 2009
I intend to update my video card to allow the operation of all three of my monitors in a triple monitor configuration. I have a 790i motherboard with Nvidia chips, so I will most likely choose an Nvidia card for the upgrade. As I will need connections for three monitors, I will have to have two cards. It is my intention to have one large screen field spread across all three monitors. I assume the best way of doing this will be to use an SLI Bridge to link the two video cards. Thus the two video cards must be identical.
Question 01: Is this the best way of realizing a triple monitor setup?
While I am upgrading, I desire to also give the system the ability to play Blue-Ray High Def Movie one of the 1920x1200 monitors I will be using.
Question 02: What are the pitfalls of playing BD-Discs on Debian. I know I will be eventually acquiring a BD-Disc player (once the prices come down a bit more), but when shelling out for two video cards, I better think as far ahead as possible and get the two video cards that will do everything I can foresee them needing to do.
Question 03: As all of my monitors have HDMI input ports, I assume that I will need Video cards that have HDMI output ports to play full 1080P movies. Is this a valid assumption?
Question 04: Can anyone recommend a video card that does what I am wanting it to do? (This is to say Two Dual Link DVI connectors and an HDMI connector per video card with standard and high definition video playback capabilities). Keep in mind that I will most likely need to purchase two of them, to the Super Expensive Bleeding Edge cards are probably not going to be a practical option here.
Question 05: Is there a way that I can just play the BD-Discs with full resolution in a window on one of the three monitors I will have connected to the computer without having to go the HDMI route?
View 5 Replies
View Related
Jul 24, 2014
I just purchased an Acer Aspire V5-123 notebook with AMD processor and graphic and installed Debian 7.6 (stable) on it. first of all, I had to install a newer (3.14.0.bpo.1-amd64) kernel image to get the ethernet card working. Then, I got problem with Xorg not starting.
Here is the error lines from /var/log/Xorg.0.log:
Code: Select all(EE) VESA(0): V_BIOS address 0x0 out of range
...
(EE) Screen(s) found, but none have a usable configuration.
and this is the output by issuing lspci:
Code: Select alllspci -nn | grep VGA:
00:01.0 VGA compatible controller [0300]: Advanced Micro Devices [AMD] nee ATI Device [1002:9834]
I installed the libgl1-mesa-dri, xserver-xorg-video-ati, and firmware-linux-nonfree packages, as suggested by AtiHowTo from Debian Wiki, but the problem still persists and the last one (firmware-linux-nonfree) actually caused the notebook to freeze on boot. so, I removed it.
View 7 Replies
View Related
Aug 23, 2014
My computer boots up, grub loads up, but I enter tty1 instead of the desktop environment.
I am using Debain GNU/Linux 7.0 (wheezy).
My mother board is an ASUS M4A88T-M.
Former graphics card was a Radeon, bought within the past couple years, pretty high specs. (I am having trouble determining what the card is right now, I'll update my post when I figure it out).
I remember having to mess around with some config files to get it to work at first, but right now how to 'unfix' it now.
View 1 Replies
View Related
Mar 22, 2015
Where should I get the drivers for the video card R7 260X to run on Debian Wheezy? Because it cant be from amd site, considering that I installed from their site, but when running apt-get check is said to me that there was the missing dependence fglrx-core..I also couldn't remove it, because it had other unmet dependencies... After long time attempting to solve on my own I just got enough pissed that I formatted the machine.Now I am asking here to find out what is the best practices when installing those drivers, because clearly I wasn't doing it right...
View 5 Replies
View Related
Feb 18, 2016
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
View 7 Replies
View Related
Jan 31, 2010
I think to change my video card. But i was asking myself, it is not good idea first to install the driver and then change the video card?
What is your opinion?
View 6 Replies
View Related
May 20, 2010
Can any recommend a PCIe video card for my AMD64 box?Looking for one which basically has a good working driver:
- can do dual head using DVI and VGA output.
- open source preferably, I've used the nvidia proprietary one before, was fine but kernel upgrades became a pain.
- passive heatsink so it's silent, doesn't need to be a fast card since my other two were both onboard graphics.
- driver can do KMS for nifty high res console.
- most typical features work, so Mplayer plays nicely and can scale to full screen etc. (xv output +/- accelerated decoding)
- even a bit of light 3D for openarena or compiz would be nice.
- don't mind buying second hand if they aren't available new
I've had a Nvidia 7050 on board which was ok, fast enough, but upgrading with the proprietary driver became painful, and that motherboard is dying a flaky death.
- The nouveau driver looked promising, but wasn't really in Debian at that stage. But I did once accidently boot a high res console while testing a brand new kernel (2.6.31 I think) and was blown away Currently got an ATI RS880 [Radeon HD 4200] on board which is fine, 2D is fast enough, but the open source driver isn't finished yet. It can't do dual head (horrible distortion and crashes), can't suspend to ram (freezes), Xvideo and any form of 3D acceleration are missing.
View 5 Replies
View Related
Aug 27, 2011
I'm attempting to get Debian (Squeeze, latest net-install CD) working on a Power Mac G5 Quad with a Radeon X1900 Mac edition video card (PCI-Express.) The installer acted a bit weird right from the start, telling me that the step "Install the system" failed (with nothing in the way of useful error information,) but I got the base system installed at least. It booted fine to framebuffer console, so I set about installing GNOME on it. apt finished with nary a complaint, but when I rebooted, I found that when it's ready to launch into X, it chokes up and just sits there with a blank screen and a cursor. (Weirdly, though, the screen itself flickers on and off at a high rate, faster than the actual cursor blink.)
Framebuffer console still works, at least, so I was able to boot into single-user mode and do some investigating in my own limited capacity for this stuff (by which I mean "Google error messages and see what specifics are requested.") lspci -k shows the video card properly with the manufacturer and product name, so it is recognizing it, at least. When I try Xorg -configure, though (Xorg 1.7.7, it says,) it aborts with a "No DRICreatePCIBusID symbol" message. Checking dmesg gives me a "process Xorg mapped non-existing PCI legacy memory" message, followed by an "invalid ROM contents" message underneath.
I'm not sure what all to make of this. I've found a thread about problems getting the same basic setup (G5 Quad, X1900, Debian) to work, but it's a couple years old and the symptoms are different. There's some discussion there about the radeon/radeonhd driver looking for Atom BIOS information on non-Atom BIOS cards, which would explain the "invalid ROM contents" message, but on the other hand, if lspci recognizes the card properly, would that be the problem? I don't know. Obviously it's playing nicely enough to run framebuffer console output properly, but beyond that I have no idea. I'd really like to get this working - it'd really improve things over the GeForce 6600 it came with...
View 1 Replies
View Related
Sep 7, 2014
I use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies
View Related
Mar 10, 2011
0 down vote favorite
share [fb] share [tw]
This is the problem I run lspci -v which checks all drivers on my system and more. It says kernel driver in use is nouveau. Then under that it says kernel modules: nvidia recent, nvidia-96, nouveau, nvidiafb. So what it looks like I have 3-4 drivers for my video card loaded and one, nouveau, being used. I think they conflict with each other.
I'm trying to add drivers other then nouveau, because the mouse freezes with it. At this point I can't seem to get rid of nouveau, I go to terminal and type:
sudo apt-get --purge remove xserver-xorg-video-nouveau
And it says that it's not loaded so I can't dump it. lspci-v says nouveau is the driver being used and trying to dump it. It says it isn't installed. I'm confused. I want to dump nouveau, what should I do? I also go into Synaptic package manager and it isn't listed as being installed.
View 1 Replies
View Related
Aug 9, 2011
I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.
There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message:
"Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."
View 1 Replies
View Related
Jun 24, 2010
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
View 3 Replies
View Related
Jan 25, 2011
If I take out the existing video card and put in another one of a different type (but not a different brand), how does Ubuntu behave? I know what Windows typically does. Windows starts up the screen using a default video driver which is at least 1024 by 768 and then asks you what this new bit of hardware is and asks where the drivers are. I'm pretty sure Ubuntu has default drivers of its own, but I don't know what their resolution is.
View 3 Replies
View Related
Mar 22, 2011
I recently bought a video card for my pc. I had it running pretty nicely on Ubuntu10.10, I started windows and later restarted and after that it wouldn't get past the Graphic cards bios. this is rather odd isn't it? I suspect it maybe dead or that my motherboard bios is stuffed but i reset that too and it still wont go.. The specs are Pentium4 Proccesor 1gb ram motherboard 661gx-m7 Nvidia GeForce FX5200 DDr128mb
View 5 Replies
View Related
Jun 19, 2011
Got a bit of a problem where xorg can't start kdm. I pulled out a dying AGP card to try and switch to onboard video, and I think the previous configuration is gumming up the works.I've been running this system for quite a while, as you'll be able to tell from the version numbers.Would like to avoid having to transport my Amarok databases to a new server. I make heavy use of the song ratings and whenever I try to transport the database from the old system to a fresh build I have to spend hours relearning sql commands.Any ideas how to either fix the resolutions on the ATI or (preferably) get KDE to start on the onboard graphics?
View 3 Replies
View Related
Feb 3, 2010
I am new to Debian but not Linux-based systems. I have been experimenting a lot with Debian Lenny/Squeeze. I am growing more comfortable each day with the Debian design. Yet there remain many unexplored areas. I am creating a migration check list. Things to check, prepare, or reconfigure when moving from one Linux-based system to Debian.
I have a good computer background and my current check list probably is fairly good. Yet I would appreciate input and opinions from experienced Debian users of things to watch in such a migration. Login defs, passwd/group files, different directory locations, keymaps, services and daemons, etc. I am not too concerned with the desktop as I plan to stick with KDE 3.5 for a while and I can basically move those settings across.
View 4 Replies
View Related
