Debian Installation :: 64bit Stable / Jessie Still Shows Chrome Update Errors?
Mar 12, 2016
I am having this problem on my old 64-bit Debian box (stable's Jessie) box, but nothing seems to fix it from what I saw online like in [URL] ... and other forums. Maybe I missed something?
Code: Select all$ sudo apt-get update
Ign http://dl.google.com stable InRelease
Hit http://dl.google.com stable Release.gpg
Ign http://ftp.us.debian.org jessie InRelease
Hit http://security.debian.org jessie/updates InRelease
[Code] ....
View 14 Replies
ADVERTISEMENT
Feb 8, 2015
I have been happily running Wheezy on the Chromebook Pixel with little or not issues. Recently I needed to re-install and decided to try Jessie. Again I was following the excellent instructions at [URL] .... except with the Jessie image.
However everytime I went to install it (after adding in the mem=4G line) it just rebooted and brought me back to the same install screen again. I just downloaded the Wheezy image again and it is installing now perfectly.
View 1 Replies
View Related
Jul 10, 2015
I have installed debian 8.8.1 stable and run updates. When I run the cat release command it shows stretch/sid. I made no changes to the apt/sources list.
What do i have to do so it only updates with the stable release I am planning to use it as a server and only want stable fixes.
View 9 Replies
View Related
Apr 17, 2016
I update Jessie "stable" 8.2 to 8.4 and now I get 5 minute interval kernel messages:
Apr 18 06:39:52 OraHost kernel: [131985.494726] sdc: unknown partition table
Apr 18 06:45:03 OraHost kernel: [132295.755942] sdc: unknown partition table
Apr 18 06:50:03 OraHost kernel: [132595.946564] sdc: unknown partition table
Apr 18 06:55:13 OraHost kernel: [132906.139327] sdc: unknown partition table
Apr 18 07:00:23 OraHost kernel: [133216.340555] sdc: unknown partition table
I believe this has something to do with an mdadm update which was included in the release. When I configured the array, I didn't partition the disk devices, so maybe that has something to do with it. I am thinking of rebuilding the array and partitioning prior to build, but a quick fix would be referable.
And also something appears to have happened to the raid device since the update.
Prior to update, the array was /dev/md0 - now it is /dev/md/0 which is a symbolic link back to /dev/md0.
mdadm --detail --scan now reports /dev/md/0 where previously it reported /dev/md0
I created a new RAID1 array on a fresh system and immediately after the create, these messages appear at 5 minute intervals.
View 0 Replies
View Related
Mar 11, 2015
This just started happening and defeats the purpose of having multiple desktops. Both the floating icon and chat windows are displayed across all desktops. I can't tell if this is intentional or not..Or maybe there is something in gnome-shell that can remedy this?
View 3 Replies
View Related
Mar 7, 2015
I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.
View 8 Replies
View Related
May 2, 2015
After some updates Jessie 8 my boot grub shows now 2 kernel versions to boot from.
3.16.0-4-amd64
3.16-3-amd64
- How do I know which one is the newest and if happy with it, how to remove the older one?
View 9 Replies
View Related
Dec 28, 2015
After doing Debian's apt-get dist-upgrade from Wheezy/oldstable to Jessie/stable, I decided to try Kernel v4.2.0 instead of v3.16.0-4-amd64 to be even more updated. However, X doesn't work. /var/log/Xorg.0.log showed:
Code: Select allX.Org X Server 1.16.4
Release Date: 2014-12-20
[ 453.305] X Protocol Version 11, Revision 0
[ 453.305] Build Operating System: Linux 3.16.0-4-amd64 x86_64 Debian
[code]...
View 8 Replies
View Related
Jan 19, 2016
I am just trying to setup my debian 8.2 stable in my Intel(R) Atom(TM) CPU N2600 @ 1.60GHz. The installation goes smooth without any issues. For this system , we are planning to use DUAL display with HDMI & LVDS.
We see that that only HDMI is working and LVDS screen is blank. However, we notice that XRANDR is is showing LVDS as connected
XORG.log:http://pastebin.com/LX9HhRui
KernlogINfo:http://pastebin.com/U2E09iZk
lspci:http://pastebin.com/eBC8wLVu
xrandr:http://pastebin.com/bS5NmAnQ
dmidecode:http://pastebin.com/2qSsHE1s
View 5 Replies
View Related
Aug 16, 2014
I installed debian jessie with kde on my laptop a month ago and everything went fine. I tried today to update the packages (805!) via apper but i get the following error message:
Error : Removing a protected system package is not allowed
WARNING: You are trying to remove the following essential packages: sysvinit-core (due to sysvinit)
View 5 Replies
View Related
Feb 22, 2015
uname -a
Code: Select allLinux OpalMint 3.2.0-4-amd64 #1 SMP Debian 3.2.65-1+deb7u1 x86_64 GNU/Linux
lspci -nnk | grep -iA2 net
Code: Select all01:00.0 Network controller [0280]: Atheros Communications Inc. AR9462 Wireless Network Adapter [168c:0034] (rev 01)
Subsystem: Foxconn International, Inc. Device [105b:e058]
Kernel driver in use: ath9k
[Code] ....
View 14 Replies
View Related
Jan 2, 2016
I was updating my system (sudo apt-get upgrade) and had several nvidia drivers proposed as "Suggested"... I changed the options for apt-get to include the suggestions, did the upgrade, and suddenly the normal size fonts in menus, along the "task bar", inside Chrome tabs and headers, and other places became too small for my old eyes to read.
I have tried Google and found issues within Gnome (mostly fonts too large).
I have tried removing the nvidia-driver so I could go back to nouveau (which worked fine) but the next time I updated my software table (sudo apt-get update ; sudo apt-get upgrade) the nvidia drivers seemed to return, even though I had purged the nvidia that I had removed... what remains on the system is:
Code: Select allglx-alternative-nvidia install
libegl1-nvidia:amd64 install
libgl1-nvidia-glx:amd64 install
libgl1-nvidia-glx:i386 install
libgl1-nvidia-glx-i386 install
libgles1-nvidia:amd64 install
[CODE]....
The motherboard is a Gigabyte AMD 9 Series FX Motherboards GA-970A-D3P; CPU is AMD FX-8350; video card is a GEForce 8400 gs; system has 32GB of 1866 RAM; a SSD for software and 750 GB spinning HD, both SATA III/6G.
I just want to be able to easily read the headings, and content in dolphin
View 14 Replies
View Related
Dec 12, 2015
I had some issues with nvidia drivers, and removed all of the packages using
Code: Select allrm /etc/X11/xorg.conf and Code: Select allapt-get purge nvidia*
Upon reboot, I was back with nouveau drivers and proceeded to reinstall nvidia drivers according to [URL] .....
Code: Select allapt-get install nvidia-driver
apt-get install nvidia-xconfig
I can then change my refresh rate using
Code: Select allnvidia-settings
but when I hit "Save to X configuration file", I get the following output in terminal:
Code: Select allroot@debian:/home/anon# nvidia-settings
Package xorg-server was not found in the pkg-config search path.
Perhaps you should add the directory containing `xorg-server.pc'
to the PKG_CONFIG_PATH environment variable
No package 'xorg-server' found
As a result, my nvidia preferences aren't saved across reboot.
Here are all of my sources:
Code: Select alldeb [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb-src [arch=amd64,i386] http://repo.steampowered.com/steam/ precise steam
deb http://ftp.ca.debian.org/debian/ jessie non-free contrib main
deb-src http://ftp.ca.debian.org/debian/ jessie non-free contrib main
[Code] ....
System Specs:
Debian GNU/Linux 8 (jessie) 64-bit
Gnome Version 3.14.1
Processor: Intel® Core™ i7-4770K CPU @ 3.50GHz × 8
Graphics: GeForce GTX 780/PCIe/SSE2
View 6 Replies
View Related
Feb 7, 2011
Well it didn't go smoothly for me. After downloading over 1,6Gb (!) of that new Debian version and restarting I was 'greeted' by a dreaded CLI instead of gnome. To make matters worse I got "command aptitude not found".
'apt-get' still worked.
Anyway, if you're gonna update check dependencies first. It seems I lost gnome due to gstreamer0.10-gnomevfs. So first uninstall that package if you got it.
View 14 Replies
View Related
Oct 12, 2014
After my most recent update, the boot sequence hangs at:"a start job is running for Create Volatile files and directories" with a timer and no limit .. I let it go for 12 minutes, but nothing.It seems as long as this sequence remains, the boot process does not finish and just hangs here.I haven't been able to find anything specific to this. I currently cannot boot into this machine, though do have access to files via dual boot.
View 8 Replies
View Related
May 15, 2015
Is there any way to get update notifications for security patches on debian jessie. I was using update-manager and update-notifier and wheezy and that worked good, Update-notifier on jessie doesn't seem like its working...
View 12 Replies
View Related
Oct 17, 2015
I'm just completing an upgrade from wheezy to jessie and get the following error
Code: Select allProcessing triggers for initramfs-tools (0.120) ...
update-initramfs: Generating /boot/initrd.img-3.2.0-4-amd64
E: intel-microcode: unsupported kernel version!
With a message like this I'm wondering if it's safe to reboot as well as how to resolve.
Is this somehow related to the change to only update the microcode on boot as reported earlier in the upgrade?
Code: Select allintel-microcode: microcode will be updated at next boot
View 5 Replies
View Related
Jan 1, 2016
Since update-manager was removed from Debian Jessie, I am looking for something similar or a way to install update-manager for 8.2. I would like a GUI.
I have tried gnome-packagekit, but some of the commands don't appear to work or it seems incomplete and I don't know of a way to test to make sure that it is working.
Other sites recommended to use smartpm. However, I cannot seem to find the plugin xfce4-smartpm-plugin in [Xfce Goodies] that would work as a notifier.
Unattended-upgrades does not meet my specifications, because to my knowledge there is no GUI configuration for this.
Though Debian Jessie is a great distro, I am finding it difficult to recommend to some newer users because it does lack a GUI updater/notifier at this time.
View 5 Replies
View Related
May 21, 2015
For some time now I have been unable to update flashplugin. I have been waiting the problem to fix itself, but no.
Here is what happens when I try to update flash:
Code: Select allrob@ace:~$ sudo update-flashplugin-nonfree --status
Flash Player version installed on this system : 11.2.202.457
Flash Player version available on upstream site: 11.2.202.460
flash-mozilla.so - auto mode
link currently points to /usr/lib/flashplugin-nonfree/libflashplayer.so
/usr/lib/flashplugin-nonfree/libflashplayer.so - priority 50
[Code] ....
The same thing happens on both my Debian Jessie machines..
Any way to force the update? Need to update their flashplugin on Jessie?
View 3 Replies
View Related
Sep 18, 2015
My chrome browser has been broken since the last upgrade. I did (just a regular "apt-get upgrade").
I get this when I try to run the browser from a console :
Code: Select alldarko@paris:~$ google-chrome
[3229:3229:0918/103229:ERROR:nss_util.cc(845)] After loading Root Certs, loaded==false: NSS error code: -8018
[3229:3229:0918/103259:ERROR:zygote_host_impl_linux.cc(541)] Failed to send GetTerminationStatus message to zygote
[3229:3229:0918/103259:ERROR:zygote_host_impl_linux.cc(541)] Failed to send GetTerminationStatus message to zygote
So to be more specific :
My system is :
Code: Select alldarko@paris:~$ uname -a ; cat /etc/debian_version ; cat /etc/issue
Linux paris 3.16.0-4-686-pae #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) i686 GNU/Linux
8.2
Debian GNU/Linux 8
l
I run the Xfce desktop
The problem is the same whether is use google-chrome stable, beta, unstable, or chromium
View 14 Replies
View Related
Apr 19, 2016
I am using chrome Version 50.0.2661.75 (64-bit) running on Debian (Gnome).
I am having the following problem, since yesterday every time I want to play a video (for ex [URL]watch?v=UF8uR6Z6KLc) The music, logo in the video and functions work but the video doesn't play. I reinstalled Chrome, clean all the data, disable all the plugins, I tried as incognito and several other options and it doesn't work, before yesterday it was working (yesterday I updated all Debians packages).
View 4 Replies
View Related
Sep 23, 2009
I am running CentOS release 5.3 (Final)
kernel: CentOS (2.6.18-53.1.13.el5)
After updating to the version: CentOS (2.6.18-164.el5), the server is not stable and i have got a lot of this kind error:
Sep 19 02:08:36 server kernel: EXT3-fs error (device sda8): ext3_lookup: unlinked inode 3372068 in dir #5148223
Sep 19 02:08:36 server kernel: Aborting journal on device sda8.
Sep 19 02:08:36 server kernel: EXT3-fs error (device sda8): ext3_lookup: unlinked inode 3372071 in dir #5148223[code].....
View 8 Replies
View Related
Jun 24, 2015
I use Firefox 99% of the time but what did you all think about this?
Audio capture of microphone allowed from Google Chrome.
[URL] ...
View 2 Replies
View Related
Aug 25, 2010
I did an upgrade a while back to lenny, but still get these errors..
Here's what I get when O do apt-get update:
View 14 Replies
View Related
Mar 6, 2015
How to troubleshoot my desktop. After I use update manager and restart the desktop, it defaults to Gnome classic display instead of the usual Gnome 3 display.
View 6 Replies
View Related
Oct 18, 2015
I'm using:
Kernel 3.13.0-65-generic (i686)
Intel 945G video card
Xubuntu 14.04.3 with XFCE 4.10
Firefox 41.0.1
Google Chrome 45.0.2454.101
Dell generic usb mouse
I cannot copy a portion of an entire webpage using Google Chrome or Firefox when copying downwards.
Upwards works.
I've have this issue on the same machine with the following systems:
Debian 8 Jessie XFCe with XFCE 4.10 using Firefox or Google Chrome
Xubuntu 14.04 with XFCE 4.10 and 4.12 using Firefox or Google Chrome
Xubuntu 12.04 live cd using Firefox
This doesn't happen on the same machine with the following systems:
Debian 8 Jessie KDE using Firefox or Google Chrome
Kubuntu 15.04 live DVD using Firefox
LibreOffice Writer
LibreOffice Calc
Mousepad
[URL]
Ex. Go to google.com and paste this in the search area:
can highlight by going upwards but not downwards xfce My mouse can highlight the first line starting with the word "ssh" and the last line ending with the word "everything ..."
My mouse cursor cannot go past the last line "expressions can match many items, but evidently not everything ..."
If I scroll upward, I can copy the entire webpage.
KDE 4.x I don't have this issue.
Using Win7 on a laptop with Firefox 41.0.2 and I'm able to scroll downwards without any issues using the same mouse that was connected to the machine with Xubuntu 14.04.
Sometimes I come across fixes for linux issues on websites. I copy the information and email it to myself for future reference in case I have to reinstall the OS again. I can do a ctrl A and ctrl c but then the entire website is copied. The ads on the side, etc.
If I put my left mouse cursor on the first word in a thread and drag/highlight downwards, my mouse cursor stops line 35 on the page. If I do the same thing but backwards, my mouse cursor goes all the way up the page. This only happens on Firefox and Google Chrome. This doesnt' happen with mousepad, Libre writer or Libre calc.
View 7 Replies
View Related
Oct 22, 2015
I have Jessie in a VM. For some days I have been consistently getting errors with apt-get update, no matter if I use httpredir of ftp.us. These are the errors:
Code:
Select allErr http://ftp.us.debian.org jessie/updates/main amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/contrib amd64 Packages
404 Not Found [IP: 64.50.236.52 80]
Err http://ftp.us.debian.org jessie/updates/non-free amd64 Packages
[Code] ....
E: Some index files failed to download. They have been ignored, or old ones used instead.
And this is the syntax in my /etc/apt/sources.list
Code:
Select alldeb http://ftp.us.debian.org/debian/ jessie main non-free contrib
# deb-src http://ftp.us.debian.org/debian/ jessie main non-free contrib
deb http://ftp.us.debian.org/ jessie/updates main contrib non-free
# deb-src http://ftp.us.debian.org/ jessie/updates main contrib non-free
# wheezy-updates, previously known as 'volatile'
deb http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# deb-src http://ftp.us.debian.org/debian/ jessie-updates main contrib non-free
# Jessie Backports
deb http://http.debian.net/debian jessie-backports main contrib non-free
Mirrors cannot be down for so long, so what is going on?
View 7 Replies
View Related
Nov 27, 2015
My primary repos are DVD .isos on my hard drive loop-mounted in /etc/fstab. Although I can install packages just fine and there are no issues with running installed applications, I must have screwed up the configuration of /etc/apt/sources.list because I get this output when I do apt-get update:
Code: Select allIgn file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
Ign file: jessie InRelease
[Code] .....
Here is my rather primitive but functional /etc/apt/sources.list:
Code: Select all# deb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official amd64 DVD Binary-1 20150906-11:13]/ jessie contrib main
# deb cdrom:[Debian GNU/Linux 8.2.0 _Jessie_ - Official amd64 DVD Binary-1 20150906-11:13]/ jessie contrib main
deb file:/dvd1 jessie main contrib
deb file:/dvd2 jessie main contrib
deb file:/dvd3 jessie main contrib
[Code] ....
So what exactly have I screwed up?
View 0 Replies
View Related
Mar 29, 2016
This is a redirect of the output of command apt-get update to a text file in /home/user
Code: Select allIgn:1 http://dl.google.com/linux/talkplugin/deb stable InRelease
Hit:2 http://ftp.us.debian.org/debian testing InRelease
Hit:3 http://dl.google.com/linux/talkplugin/deb stable Release
Ign:4 http://linux.dropbox.com/debian sid InRelease
Hit:5 http://deb.opera.com/opera sid InRelease
[Code] ...
They all refer to repos that cannot validate authenticity.
View 2 Replies
View Related
Nov 13, 2010
I'm upgrading my machines UDTE-64 from 9.10 to 10.4LTS. 9.10 is working fine. I just want to upgrade to a current LTS release.Update manager showed the way on one desktop and I upgraded successfully.On another desktop and a laptop, update manager does not show that a new release is available. It's fair game to tell me to use the live cd so long as I preserve user data.
View 5 Replies
View Related
