Debian Hardware :: Jessie Installation By Wireless Connection

May 30, 2014

My wireless connection doesn't work at the Debian jessie installer. This problem appears both on netinst installer and dvd-1. I try to install by USB key. I get message: network key exchange failed. I've tried to disable wifi WPA2, however I can't connect even then. This problem doesn't appear on Debian wheeze installation.

View 8 Replies


ADVERTISEMENT

Debian Installation :: No Wireless On Jessie Testing With Intel 6300 Card

Mar 9, 2015

I just installed jessie testing however the wireless card was not recognized, lspci says it's Intel Centrino Ultimate-N 6300.

View 3 Replies View Related

Debian :: Connection Timeout Too Often In Jessie

Sep 6, 2015

I am running debian 8 stable version (which I starting to think not that "Stable") and when i surf web pages its ok except the fact that I am too often get connection timeouts then i need to press "enter" in the ur box to try again and then its maybe work if not I am going to press another "enter" on the url box until i have connection to the site its important to say its not a isp or hardware problem. I run the web with no problems in that other operating system which I am not getting back to.....

View 14 Replies View Related

Debian :: Blueman Connection Failed (Jessie)

Oct 18, 2015

I recently Installed debian 8.2 on my toshiba satellite l505-es5034. Using cinnamon desktop.

Did googling regarding how to get my insignia usb bluetooth dongle functioning and ended up installing blueman.

It can search for devices but when i try to connect to my logitech bluetooth adapter for my stereo it reads "Connection Failed: No such file or directory"

saw on arch linux wiki that this may happen if the user isnt in the lp group so I added the user to the group and still the same result.

I tried connecting to my phone with same result. No issue pairing, connection failed.

View 0 Replies View Related

Debian :: Jessie - SSH Working - Connection Refused On Ispconfig3

Feb 1, 2016

I have a 'little' problem with my vps, which was working before. Here is what I made:

- order an new IP and I was trying to modify /etc/network/interfaces in order to configure the ip
- even if I was logged as root, I wasn't able to modify 'interfaces' so I tried sudo and alsoto mount (different commands I found.)
- rebooted the VPS

Current situation: I can access ssh, but ispconfig3 and the websites are not working anymore.

View 1 Replies View Related

Debian Hardware :: Logitech Wireless Mouse Not Working On 64 Bit Jessie

Sep 22, 2013

I have a couple of Logitech wireless mice (M325) with USB Unifying receivers, one for a couple of netbooks (Asus & HP) and one for my old desktop. These have been working very nicely

under 32 bit OSs :-

Windows XP

Debian testing (Wheezy & Jessie)

I now have a new 64 bit desktop (Intel i5) and the Logitech mouse

DOES work with :-

The Bios
Windows 7

But it does NOT work with :-

Debian Jessie

I have found an old mechanical Sun 3 button mouse (USB), which has got me
working to some extent, but does remind me why I got an optical wireless mouse!

My old 32 bit desktop reports :-

Code: Select all$ uname -a
Linux copper 3.10-2-686-pae #1 SMP Debian 3.10.7-1 (2013-08-17) i686 GNU/Linux
 
Code: Select all$ lsmod | grep hid
hid_logitech_dj        13054  0
usbhid                 36040  0
hid                    64702  2 usbhid,hid_logitech_dj
usbcore               110348  4 uhci_hcd,ehci_hcd,ehci_pci,usbhid

[Code]....

I need to get the comparative info off the new desktop, but I am currently hampered by the old mouse and the bug, whereby when I asked for the LXDE desktop I also got Gnome installed, and Lightdm ignores my request to start LXDE and dumps me in Gnome!!

The main differences that I have found was in the modules where the 32 bit one uses uhci_hcd, while the 64 bit one uses xhci_hcd. The dmesg section is like the above, finding the Unifying device, but is missing the last line where djdevice finds the mouse..

View 14 Replies View Related

Debian Configuration :: Jessie - Wireless Not Working Dell Inspiron 1525

Sep 19, 2015

I have a problem with my laptop Dell Inspiron 1525 wireless on Jessie Cinnamon.

I have installed the b43 firmware and after that everything seemed working but just for a few seconds.

I have tried to reboot and after that I can't browse the internet just for a few seconds and after that Iceweasel loading and loading and nothing's happening.

I can't surf on the net just with cable but the wifi setup shows everything is okay 95% signal strength and connected.
Also tried reinstall the firmware and reboot and it's all the same after.

I can easily use my wifi with my smartphone too.

View 1 Replies View Related

General :: Debian - Gnome: Wireless Connection List Missing Connection?

Nov 12, 2009

Each time I start up debian -lenny, the network-manager does not automatically connect me to my wireless network. The connection list shows a lot of networks available, but mine is always absent from the list. This means I each time have to go to "Connect to other Wireless Network" in and write in my network name (SSID) and password (PWA2 Personal). Then is connects nicely and everything works fine until next time I boot

View 5 Replies View Related

Debian :: How To Remaster Jessie Installation

Oct 9, 2015

I'd like to remaster my jessie system (with my own preferences) but i cannot find any tools on jessie like ubuntu has.

View 4 Replies View Related

Debian Installation :: Jessie Won't Boot

Sep 26, 2015

I have two desktops running wheezy for years without problems. Recently, I reinstall jessie on one of them and won't boot anymore.The hardware is pretty normal: Asus motherboard, 12GB RAM, Nvidia video card, SSD hard drive, .After the install of jessie finishes, the very first boot failed, which means it hung up forever. The part that is annoying is that it fails at different places whenever I try.

For example, something, it fails at the following:
[ OK ] Started LSB: REP portmapper replacement
[ OK ] Reached target RPC Port Mapper
Starting LSB: NFS Support files common to client and server

Sometimes, it failed at start job is running for lsb set console font.It even failed to the console. When it goes to the console login, I can't put any user name or password. It's all frozen.The problem appears to be video card problem. But it worked fine in wheezy.

View 6 Replies View Related

Debian Installation :: Jessie Update Failed

Aug 16, 2014

I installed debian jessie with kde on my laptop a month ago and everything went fine. I tried today to update the packages (805!) via apper but i get the following error message:

Error : Removing a protected system package is not allowed
WARNING: You are trying to remove the following essential packages: sysvinit-core (due to sysvinit)

View 5 Replies View Related

Debian Installation :: Booting Jessie 64b With UEFI From USB

Sep 30, 2014

I have this new computer (MSI Ge70 2PE Apache Pro) that came with Windows 8 and UEFI. I freed space to make a partition to install Debian testing 64bits on the same HD where Windows is. I had no problem making the partition but after that I tried making a bootable usb to install Debian using the dd command and it didn't work. So I tried with an install dvd and even when I changed the boot order in the bios it didn't work.

After reading some more I realized that there could be a problem trying to boot a normal installation dvd with UEFi so I disabled Secure Boot and then switched the boot mode on my Bios to UEFI with CSM. Again it didn't work and it booted directly into Windows. So I switched the boot mode to Legacy. This time Windows didn't boot directly but I get a "Reboot and Select proper Boot device" message on a black screen.

I now realize that I need to install a UEFI "version" of Debian along the UEFI version of Windows 8. I guess that's why it didn't work with the Legacy boot mode. URL...The installer does not provide a convenient way to install an UEFI boot loader, so you are going to install a regular BIOS boot loader at first, and switch to UEFI later.

Use the expert mode and format your hard drive with a GUID Partition Table (GPT). Create a small partition (1 MiB would be far enough), type it as a BIOS Boot Partition (this is the untitled flag above the “bootable” one in Partman), do not format it and do not mount it: this will be needed for BIOS booting. Create another small partition (same kind of size), type it as an EFI System Partition (this is the“bootable” flag), format it as FAT and mount it on /boot/efi: this will be needed for UEFI booting.

View 6 Replies View Related

Debian Installation :: How To Select KDE In Jessie Installer B2

Oct 28, 2014

I wrote the hybrid DVD image for DI b2 (Jessie) on the USB drive and booted from it (UEFI mode). But I don't see KDE there in the advanced options. Was it removed from the image, or desktop environment selection is moved to some late stage now?

View 2 Replies View Related

Debian Installation :: GUI Flickers After Upgrading To Jessie

Mar 12, 2015

I have just Upgraded debian wheezy to jessie but after upgrading , the gui seems to flicker areas of gui are not repainting on closing applications ,windows do not render properly.

View 5 Replies View Related

Debian Installation :: Bluetooth Not Working On Jessie

Mar 20, 2015

How to get Toshiba Satellite's bluetooth to work. Here is output that I think may be useful.... but I could be wrong. Pretty much everything I have found is outdated, has dead links, or didn't work.

So far, I've learned (at least from what I've understood) it has to do with kernel drivers/modules not working. I'm on Jessie right now since my graphics driver didn't work on the stable kernel.

lspci
Code: Select all00:00.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 1566
00:01.0 VGA compatible controller: Advanced Micro Devices, Inc. [AMD/ATI] Mullins [Radeon R4/R5 Graphics] (rev 05)
00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Kabini HDMI/DP Audio
00:02.0 Host bridge: Advanced Micro Devices, Inc. [AMD] Device 156b
00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Family 16h Processor Functions 5:1

[Code] ....

View 4 Replies View Related

Debian Installation :: Kernel Backport For Jessie (8.0)?

May 16, 2015

I installed the 32 bit version of Debian Jessie (8.0) on an Asus X205TA. The Asus X205TA laptop is quirky like a lot of Intel Baytrail Atom laptops/tablets in that it has 32 bit EFI but a 64 bit capable CPU, and installing Linux on them is an exercise in frustration. Jessie is probably the first distro to support 32bit EFI out of the box, and the install went surprisingly smoothly. As expected the sound and built in WIFI does not work, but everything else seems to work well.

I spent half a day compiling the 4.03 kernel but it crashes on boot, and I ended uninstalling it in frustration.

Is there any backport of the 4.0 (or 4.1 which is currently a release candidate) for Jessie? Debian also seems to have pulled the kernel image off of their "experimental" repository.

[URL] ....

View 6 Replies View Related

Debian Installation :: Overwrite Wheezy With Jessie

Jun 20, 2015

I already have a Notebook with windows (for some reason it needs 3 partitions..) and wheezy. When I installed wheezy I create 2 logical partition inside a primary one: one logical for /home and the other one for filesystem. Now I would like to overwrite wheezy and get get jessie, but without touching windows and home.

I already try to upgrading and it went wrong, so I prefer overwrite, what I have to do during "manual installation" phase?

View 11 Replies View Related

Debian Installation :: 8.3.0 Jessie - Some Programs Don't Open

Feb 27, 2016

I have a new installation of Debian 8.3.0 Jessie which I have been playing with and enjoying for a couple of weeks. Ever since I installed the operating system to my computer, I have noticed a few different programs just won't open. For example Nepomuk Back Up and Nepomuk Cleaner. I do not know if these programs shipped with the original installation or if they got installed with a package later, but when I try to open these applications the ball just bounces for a minute then disappears. I went to my package manager and uninstalled these applications and then reinstalled them, but there has been no change in behavior. Gparted also does the same thing, but with Gparted the little ball bounces for quite awhile before it disappears.

View 14 Replies View Related

Debian Installation :: Installing Jessie In Virtualbox Fails

Aug 6, 2014

I'm just trying to install a Jessie i386 image in Oracle Virtualbox.

My host specs are:
Windows 7 Home Premium x64

Wheezy is installing correctly, but Jessie is not. It fails during the partitioning of the disk, and gives an error message like: unable to write to disk, start = 236342 length = 0. This is not the exact message but I'm unable to try again at the moment.

When I install Wheezy and apt-get update / upgrade to Jessie, I get a black screen after reboot..

View 4 Replies View Related

Debian Installation :: Tty2 To Tty6 Have Disappeared In Jessie

Nov 14, 2014

I just installed Jessie amd64 for the first time. Few problems so far, but Alt-F2 to Alt-F6 no longer switch to another tty - there's just a black screen with a flashing cursor that doesn't respond to keystrokes. I rely on being able to switch between ttys a lot, so this is inconvenient.

I've searched and found a workaround for grub2, but I'm using grub-legacy (and don't want to switch to grub-pc as it's over complicated IMO). Graphics hardware is AMD 780G/SB700 (using firmware in firmware-linux-nonfree).

View 6 Replies View Related

Debian Installation :: How To Install Libpam-mount On Jessie

Dec 4, 2014

I have been building a debian jessie system reasonably successfully but have come unstuck with libpam-mount. On a previous Ubuntu saucy system I simply installed it, created the appropriate pam_mount.conf.xml file and mounts would happen when users logged on and dismount on logoff. With jessie I can see that there is a libpam-mount package in main but when I try apt-get install it fails. If this package has been obsoleted (as one of the messages indicates might be the issue) what is the jessie way of handling this?

Here is my sources.list
Code: Select alldeb http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib
deb-src http://mirror.aarnet.edu.au/debian/ jessie main non-free contrib

[code]....

View 3 Replies View Related

Debian Installation :: Install Jessie From RC1 Or Do Upgrade From Stable?

Mar 7, 2015

I installed Jessie with the RC1. URL...A2) The network install images for testing (jessie) can be found at URL...However, unless you want to test the installer for testing the better choice is to use the stable installer to install a minimal stable system and then upgrade to testing by changing your /etc/apt/sources.list file.

View 8 Replies View Related

Debian Installation :: Custom Keyboard Layout On Jessie

May 23, 2015

I was using a custom layout for my keyboard as I've a UK laptop but still use french accents sometimes. After the update from Wheezy to Jessie my configs disappeared so I have put them back:

- Defining my layout here: /usr/share/X11/xkb/symbols/gb
- Adding here: /usr/share/X11/xkb/rules/base.xml and here /usr/share/X11/xkb/rules/evdev.xml in the gb configItem

Code: Select all       <variant>
          <configItem>
            <name>accentsFR</name>
            <description>English (UK with french accents)</description>
          </configItem>
        </variant>

- Adding the declaration of the layout here /usr/share/X11/xkb/rules/base.lst and here /usr/share/X11/xkb/rules/evdev.lst

Code: Select all  accentsFR       gb: English (UK with french accents)

So everything looks alright, if I go to System Tools -> Preferences -> Settings -> Keyboard -> Input Source my layout is well selected and I can even see the correct layout by clicking on the keyboard icon (cf my snapshot)

Here is the snapshot of the keyboard input source settings: [URL]....

View 1 Replies View Related

Debian Installation :: Jessie 8.1 - Mirror Does Not Support Specified Release

Jun 17, 2015

I am doing a new Debian install on an older Dell laptop (Latitude D520, but that should not matter). I downloaded the net install .iso, burned it to disk, and ran it. Everything was progressing like any other installation I have done until I was asked to pick the mirror. I chose ftp.us.debian.org like I normally do and it was rejected. When I checked the output on virtual console 4, I am seeing the message "mirror does not support the specified release (jessie)."

I tried a bunch of random mirrors, including international ones, and they all give me that message.

View 3 Replies View Related

Debian Installation :: Jessie Install With Switchable Graphics

Jul 20, 2015

Somehow got it partly to work. I have a new installation and I am using the 4.1 kernel now. I can switch on the Radeon chip which is great, but still have some trouble when trying to turn it completely off.

I have an Acer Aspire 4820TG Laptop with:
Core: i7-640M
integrated graphics: Intel
discrete graphics: Radeon Mobility 5650HD

I have installed Debian Jessie. After installing the non-free firmware for my ATI chip (following [URL] .....) so I could use vgaswitcheroo, the system broke.

The problem looks as follows: When I start the system the graphical login screen gets stuck and the console tells me first:

Code: Select allradeon 0000:01:00.0: Userspace still has active objects!

then a lot of numbers, then

Code: Select allradeon 0000:01:00.0: ring 5 stalled for more than 10000 msec
[drm:uvd_v1_0_ib_test] *ERROR* radeon: fence wait failed (-35).
[drm:radeon_ib_ring_tests] *ERROR* radeon: failed testing IB on ring 5 (-35).

and this repeats once (or twice?) until several new messages arrive.

Those pause at

Code: Select allFixing recursive faul but reboot is needed !

Then again lots of more error messages until the everything freezes, with the last message

Code: Select all---[ end trace 13dfd971ff8e0aed]---

(Might contain typos. I don't know how to get the whole messages since the system dies a minute after booting and I only have a few seconds after the error messages start)

Even when I prevented the xserver from starting at boot I still got the same problems.

I would very much like to be able to switch between my chips, because I can only use external monitors when the ATI chip is active, but I would also like to be able to use the battery saving internal chip option.

I also tried to install the proprietary driver (though I would prefer if I didn't have to do that), but I couldn't get the xserver to work while it was installed.

lscpi output:
Code: Select all00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:01.0 PCI bridge: Intel Corporation Core Processor PCI Express x16 Root Port (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 05)

[Code] ....

View 5 Replies View Related

Debian Installation :: Upgrade From Squeeze To Wheezy Or Jessie

Jul 28, 2015

is it possible to simulate upgrading a Squeeze installation to a Wheezy or Jessie installation, on a OVH server ?I would like simulate upgrading server, and if not problems, upgrading in real time.I don't do that manipulation, and I don't do mistakes on a production server.

View 2 Replies View Related

Debian Installation :: Creating And Booting Jessie Installer

Aug 15, 2015

I am installing Jessie to a dual-boot Dell Inspiron 1150 laptop currently booting Windows XP + Ubuntu 9.04. I downloaded the small installation image:

Code:
Select all//cdimage.debian.org/debian-cd/8.1.0/i386/iso-cd/debian-8.1.0-i386-netinst.iso
and created a live dvd using growisofs.

The Jessie install documentation says: "If you downloaded an iso image, check that the md5sum of that image matches the one listed for the image in the MD5SUMS file that should be present in the same location as where you downloaded the image from." For the downloaded image this produced the result

Code:
Select all~$ md5sum debian-8.1.0-i386-netinst.iso
095a83b715e1b74b6d30b2259275f4af  debian-8.1.0-i386-netinst.iso

There is no MD5SUMS file in the download directory. There is an md5sum.txt file included in the iso image: this lists the md5sum of every file in the image, but not that of the image itself. The check for the burned dvd was successful :

Code:
Select all~$ dd if=/dev/cdrom | head -c `stat --format=%s debian-8.1.0-i386-netinst.iso` | md5sum
645120+0 records in
645120+0 records out
330301440 bytes (330 MB) copied, 1.28047 s, 258 MB/s
095a83b715e1b74b6d30b2259275f4af  -

Is this a documentation error ? I next booted the laptop from the live installer dvd. After generating a number of messages, it stopped displaying a message along the lines of: "Invalid video mode - press Enter to select a mode".

I assumed it would wait for me but it soon rushed on, producing screeds of segmentation fault error messages, eventually slowing down to a rythmic display of:

Code: Select all*** Error in Xorg:free() invalid pointer: 0xb7101ce3

***Surely it should have waited for me to press Enter?

View 3 Replies View Related

Debian Installation :: Upgraded To Jessie 8.2 Now Boot Hangs

Dec 4, 2015

I had Debian 7.9 up and running like a charm until yesterday. Today I did the upgrade to 8.2, now boot hangs. I see 3 boot entries for the new kernel now -

Debian GNU/Linux, with Linux 3.16.0-4-amd64
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (sysvinit)
Debian GNU/Linux, with Linux 3.16.0-4-amd64 (recovery mode)

The latter 2 entries have no problem booting up. So do the previous kernel(3.2.0.4) entries. Only the first one hangs, for which I see these 6 lines on the console:

[ 0.214704] pnp 00:04: can't evaluate _CRS: 12298
Loading, please wait...
fsck from util-linux 2.25.2
/dev/mapper/myhost-root: clean, 198627/61000000 files, 2160052/24412 blocks
[ 0.047141] kvm: disabled by bios
[ 0.000985] kvm: disabled by bios

How can I make it boot up like others?

View 6 Replies View Related

Debian Installation :: Upgrading One Particular Package From Jessie To Stretch

Jan 8, 2016

I have installed Package: gnumeric (1.12.18-2) in my Jessie/Mate system. It is very jittery on scrolling, and I was wondering if I should upgrade to the version (1.12.26-1) in stretch(testing), as there seem to have been a large number of bugfixes.

I have tried the following simulation command, but it gives the error message shown:

Code: Select all~# apt-get --simulate -t stretch  install gnumeric
Reading package lists... Done
E: The value 'stretch' is invalid for APT::Default-Release as such a release is not available in the sources

The documentation suggests that I may need to create an apt preferences file. I do not have any of the following files mentioned by the apt-get man page:

/etc/apt/preferences/etc/apt/preferences.d/etc/apt/apt.conf

What I would like to do is upgrade just the specific package jessie/gnumeric(1.12.18-2) to stretch/gnumeric(1.12.26-1). I do not want any other packages to be inadvertently upgraded to stretch. I have seen warnings that one can easily end up with a badly mixed system and I wish to avoid that! I also do not want to disturb the standard apt-get update, which I am running daily via anacron at present.

View 14 Replies View Related

Debian Installation :: How To Install Musescore 2.0 (sid Package) On Jessie

Jan 25, 2016

Musescore 2.0 is available but only for Sid, I have just installed Jessie since I wanted the stable version. I was wondering if it was possible to install that packaged only from the sid distribution on jessie. How should I proceed?

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved