Debian Hardware :: Blank Screen After Unsuspend
Nov 3, 2013
I installed wheezy/LXDE yesterday in my HP netbook (first-time Debian user) and I am unable to get suspend/hibernate to work properly: after I come back all I get is a blank screen, although the computer seems responsive (CapsLock and such do respond).
I installed firmware-realtek from non-free (for rtl_nic/rtl8105e-1.fw, which was missing at install), nothing changed. I have acpi installed (it came by default). My graphics card is an Intel GMA 3650 (I see in internet that this is a problematic one). I just want a lightweight Linux to replace the default W7S.
View 14 Replies
ADVERTISEMENT
May 9, 2010
I am having the same problem, as soon as X tries to load my screen just goes blank. I have an ATI Radeon 9550. At first I tried switching between VGA and DVI as well but upon ruling that out, I switch to my on-board video card and that is working thus far, but I'm trying very hard to figure out a way to be able to switch back. Anyways I'll check back in later on if I have any new information I will post.
View 3 Replies
View Related
Jan 28, 2010
Up until a couple days ago, my computer had no problems suspending to ram. However, now when I suspend, and later hit a key on the keyboard (usually space) to resume, all I see is an illuminated black screen. I can't even open a tty via Ctrl+Alt+F1. I can however ssh into the machine.he only possibility I can think of is that I am no longer running kdm. I just use "startx" to star an openbox-session.
View 8 Replies
View Related
Sep 11, 2015
I have an system that d8.2 appears to install correctly. On first (or subsequent) boot, I get the DB8 load screen, then a quick fsck, then nothing. I appear to have some sort of environment running as I can move a mouse pointer, but nothing else.
CTRL-ALT-F2 results in the mouse pointer vanishing, but nothing else. I expected to end up at the CLI.
I have tried different installs and options, always the same result. This machine ran an earlier version with issues.
View 7 Replies
View Related
Jun 18, 2015
I have this machine (motherboard ITX Jetaway NF94-270-LF based on CPU Atom N270, full specs here) as a server for some time now (about 4 years). Debian 8.1 is installed on it.
Two days ago, after a power failure, the machine was not able to complete the boot process. I attached a keyboard and a monitor (on VGA port, the motherboard also as a DVI one, but I don't have a suitable monitor) to be able to see what's happening and interact with the machine. Unluckily, at a certain point during the booting sequence the screen goes blank and the monitor goes in standby mode; apart from that, the boot process continues in the background.
As far as I can recall, this behaviour existed for at least a couple of years (if not from the beginning) and the boot process was always completed successfully until two days ago.
The screen goes blank after the setup of the keyboard mapping. I tried everything to avoid the screen going blank: in the Grub menu I set the "vga" parameter, the "nomodeset" parameter, the grub_gfxmode parameter, I removed the "quiet" option, I removed the "load_video" line, I forced the BIOS to only use the VGA port for the video and so on, in order to disable or configure differently the video and the framebuffer. All these stuff had no effect at all: the screen keeps going blank at the same point during the boot process.
The only way I was able to use a fully booted system through keyboard and monitor was via the rescue mode of the Debian 8.1 netinst image. But that way, of course, I wasn't able to observe the normal boot process. So, I checked the boot parameters of the rescue mode and I found that the only usefull parameter was "vga", which I already used and was ineffective.
View 4 Replies
View Related
Aug 23, 2013
I have some problem with Debian 7. Just installed Debian 7 wheezy.
Motherboard Intel D2500CC, graphics - Intel GMA 3600. Monitor (BenQ V2200 Eco) connected via VGA cable. No X server installed.
After GRUB boot as soon as modesetting kicks in, the monitor loses the signal and goes black. Keyboard does appear to be active, as Ctl-Alt-Del will cause a reboot.
I tried nomodeset, vga=791, 771 etc kernel parameters, but this won't work.
View 10 Replies
View Related
Feb 19, 2015
I have just installed Debian 7.8.0 powerpc on my imac G3 (400Mhz, 256Mb Ram). I had repartitioned the drive with the view of having a dual boot machine, had OS9 installed on partition 1, linux installed on partition 2 and a ext4 data partition and a 1Gb swap partition. After I installed OS9, I ran Debian Installation CD and was successfully installed. Rebooted, got through the on screen text past file system check, then screen went blank. I searched Google and forund that if I ran ctrl+alt+f1 and logged in, then ran lspci, I could get the ID of the graphics. So I did, and:
Code: Select alllspci
...
0000:00:10 Display Controller: Advanced Micro Devices [AMD] nee ATI Rage 128 RL/VR AGP
View 2 Replies
View Related
Feb 17, 2011
It seems I am having the same problem, but on a Toughbook CF-28. I tried searching the forum for a solution, and Google, but to no avail. Here is the run down:Installed Debian 6.0 from the NetInst (i386) CD, and all went well. Re-started the laptop, and all booted up fine (got the code lines). When the login screen should appear, all I get ilackscreen.CF-28 Hardware:RAM: 512MB. CPU: Pentium III Mobile 800 MHz (Im guessing from Google) Searches) Not sure what else it has, no information came with the laptop. I do know it has an ethernet port, which worked durininstall, has no wireless, does have a touch screen.I apologize for my noobness, but I am uber new to Linux. Any ideas on how to resolve this issue?
View 14 Replies
View Related
Jun 2, 2011
I installed Debian squeeze on my old Dell Latitude C600 laptop. I Installed it from a cd that worked to a friend of mine. I finished the installation successfully. After booting the computer I can get to the grub screen and after choosing the OS (Debian GNU/LINUX, with linx 2.6.32-5-686) I see the computer loading and running command lines, but after few lines, I get black screen and I hear the computer "working" but can't see anything and it doesn't react to anything that I do.
View 9 Replies
View Related
Jul 20, 2010
I'm trying to make dual boot system with Lenny (64bit) along with WinXP. I'm using one HDD with 2 partitions and installed first XP then Lenny. Everything seems fine till the first boot after fresh install. Lenny starts to boot and after same point the screen goes blank and then is turned off and that's it...nothing happens. Happens so fast that I'm unable to see the exact messages on the screen. Maybe somewhere around staring anarcon?
PC is:
Athlon64 X2 5400+
Asus M2V-MX motherboard
3GB DDR2 800
500GB WD SATA2 HDD
Radeon x800 GTO video
I reinstalled 2 times and it's the same. WinXP is working fine though but I really don't want it to be my OS...
Another "hint" from today: The same happens when I use "Try without installing" of Ubuntu 10.04(i386) Live CD. It starts loading and at some point turns off the monitor.
Tried also with 8.04(64bit): Boots till it reach something like "Settings sensor limits" and then it's stuck. I have consoles though (Ctrl+Alt+F1/2/3...).
View 14 Replies
View Related
Aug 30, 2015
This started happening after I started working on the kernel image and initramfs tools configurations basically started trying to make my system work the way I wanted.I can be doing anything like playing worms or being on this forum and the screen turns black but I don't lose energy just nothing shows on the screen and my keyboard doesn't respond the num lock doesn't turn either state,
View 5 Replies
View Related
Oct 15, 2010
I had a debian installation with kernel 2.6.32 I had a set of instructions to apply a patch to kernel which I followed to the T. The grub now shows the Debian installation with the old kernel and the Debian installation with the patched kernel.
The trouble is the system goes blank after attempting to start gdm3.
I have tried running in recovery mode and then typing startx but it only shows a blank screen.
Code: lspci | grep -i display
00:02.1 Display controller : Intel Corporation 82852/855GM Integrated Graphics Device (rev 02) If i boot with the old kernel, everything works fine. Is this an "X" window configuration issue. I tried X -configure but still nothing changed.
View 3 Replies
View Related
Jul 14, 2015
When I mount Debian 8 live into VMWare Player 7.1.2 64bit, it works awesome with and without graphics acceleration enabled i.e I can get into the desktop and all that.
But, when I installed it, the reboot is just a blank screen. I am not sure how I can proceed from now.
I am on Windows 7, 64bit Ultimate.
View 10 Replies
View Related
Apr 13, 2010
I'm always getting a blank console screen after booting a 2.6.32-trunk-amd64 kernel in squeeze. I still can read the line "Loading, please wait ..." in the display for a second - then it's completely black until X windows is starting. When I try switching from the X console to another virtual console (by pressing Ctrl-Alt-F1 e. g.), the complete system freezes. I have to hard reboot then.When I boot the previous 2.6.32-3-amd64 kernel instead, everything is fine as expected, though.There's a line "GRUB_GFXMODE=1024x768x16@60" in /etc/default/grub as well as a line "set gfxpayload=keep" in /etc/grub.d/00_header. So the problem might be framebuffer related in any way. Any ideas what could be tried?The system is a Latitude E6500 with a Mobile 4 Series Chipset Integrated Graphics Controller
View 2 Replies
View Related
May 15, 2010
and this morning's updates broke x. I get a blank screen instead of the login. I'm running an Nvidia 7900GS. I tried re-installing the Nvidia drivers... no good. I switched to the nv drivers and got further; I got the login screen, but when I try to log in it gives me the KDE splash screen and then takes me back to the login screen. I'm not sure what to try next.
View 13 Replies
View Related
Mar 28, 2016
I am running Debian 8.3, and I'm running Gnome 3.14.1.I have an external monitor plugged in with HDMI, and while Linux is loading both screens are on duplicate. Once the GUI kicks in, only the external screen works, so I have to enter my password blindly. Then, I open a terminal and run
Code: Select allsudo echo 950 > /sys/class/backlight/intel_backlight/brightness
and the laptop screen turns back on.
I'm wondering: Is there a way to streamline this so that it happens on boot, but after GNOME loads?Or: Is there a better method to solve this?
View 1 Replies
View Related
Jun 4, 2010
When i turn on my monitor the screen goes blank, but the 'on' button is lit up. Any ideas of what the problem could be?edit: When i turn off and turn on my monitor, it displays what's on my computer for a couple of second and than the monitor turns off again.
View 7 Replies
View Related
Nov 19, 2010
I just recently got a Dell Inspiron 1525 laptop and have installed Debian on it. When I installed it, I did not install the 'Graphical desktop' packages...only the 'Standard system utilities'Everything has been fine, however when I installed Xorg (aptitude install xorg) and restarted my computer, my screen goes blank at bootup. I can see the grub menu, as well as the beginning bootup process, up until udev begins to load. I have a feeling it has something to do with KMS now being loaded but am not sure.
View 7 Replies
View Related
May 8, 2010
I've had Windows XP Home installed on my netbook (Toshiba NB205) and I've just tried to install squeeze via net install. In particular, I installed grub. Everything seemed to go ok during the installation, but when I boot up, all that appears is a blank screen with nothing but at "j" and a cursor. One thing I can think of that might offer a clue, is that when asked to installed grub, the installer said it recognized two operating systems: Microsoft Windows XP Home, and Windows NT/XP. The latter is not really an operating system, but the backup partition.
I don't know how this might affect grub's functioning. What does this "j" mean? Looking at this: [URL]. Could this have some thing to do with boot flag? Should I switch it to my NTFS partition instead of my root partition? Doing that at least let's me boot into Windows. But that's not what I want. I've never dual booted before. So I booted back up with my USB, intending to reinstall Debian, and it loaded grub instead. So apparently grub is now on my USB. Then it booted me into Debian.
View 3 Replies
View Related
Jul 21, 2015
After upgrading to Jessie (AMD64) I have a totally blank screen, not even a blinking cursor. The video card is a GeForce 6200 and I have nouveau loaded. I originally had an nvidia module in Wheezy. I decided to use the instructions at the Debian NvidiaGraphicsDriver wiki to install the NVIDIA legacy package. That was worse. The nvidia module was unloaded in the X.org log, and the screen presented as a login console.
I tediously removed all NVIDIA components, and reverted to nouveau since its report in X.org log says it supports GeForce 6 series cards. That brought me back to a totally blank screen. The nouveau module lists as "video" doing lsmod. Both gdm3 and the X server processes are up and running. Other than reporting that "nv" couldn't be loaded, there is nothing in X.org log that appear abnormal. The .xsessions_error log is troubling however, but I don't have the knowledge to interpret.
View 4 Replies
View Related
Mar 20, 2016
I'm trying to connect to my server (to the gnome session) using vnc. I run vino-server on debian
I get pass the authentication (configured none) but I get a blank screen instead of my session.
Log from vino on the console:
root@B10-20-30-4:/etc/vnc# /usr/lib/vino/vino-server
** (vino-server:2547): WARNING **: Couldn't connect to accessibility bus: Failed to connect to socket /tmp/dbus-7l6BcHLxb5: Connection refused
(vino-server:2547): EggSMClient-CRITICAL **: egg_sm_client_set_mode: assertion 'global_client == NULL || global_client_mode == EGG_SM_CLIENT_MODE_DISABLED' failed
20/03/2016 05:20:28 PM WARNING: Width (3046) is not a multiple of 4. VncViewer has problems with that.
20/03/2016 05:20:28 PM Autoprobing TCP port in (all) network interface
20/03/2016 05:20:28 PM Listening IPv6://[::]:5900
[Code] .....
View 0 Replies
View Related
May 27, 2011
I got the nVidia driver and Compiz installed. Everything's running fine . But then I tried crtl+alt+F1 - which worked though the font was way too big - and then crtl+alt+F7 to get back to the Desktop but it went to a black screen and blinking cursor instead. I searched a bit and it seems this was a problem a few years back but nothing recent. FWIW, I don't have this problem with Hardy/nVidia/Compiz on another drive in this same machine. Is there a way to fix this?
View 3 Replies
View Related
Nov 18, 2014
I have a new laptop, I first installed Debian stable, but the wifi card didn't work, and the screen was 1024x768. So I installed kernel up to 3.16 with wheezy-backports, but after the boot, the screen become blank. The only way to see the screen is set "nomodeset" in /etc/default/grub, but It's impossible to see the screen beyond 1024x768 resolution.
I also tried to install linux-image deb packet from [URL] .... , because it worked for someone in internet, but not for me.
Here some details:
uname -r
3.16-0.bpo.2-amd64
View 4 Replies
View Related
Apr 29, 2011
After installing debian squeeze I tried installing a nvidia driver. I had to type: /etc/init.d/gdm3 stop The nvidia driver wouldn't install because the 'make' command was missing in a path or something. Now I cannot get the GUI anymore. startx gives me a blank screen rebooting the computer gives me a blank screen. I can only boot in recovery mode. but the nic doesnt work so no internet connection.
View 1 Replies
View Related
Feb 26, 2011
I'm using a dell latitude d630 with an nvidia quadro 135M card. I'm able to suspend without any problems while running the X server. If I try to suspend on console without the X server running, the laptop wakes up to a blank screen. The screen remains blank and my only resort is to type sudo halt (with the screen off).I'm using the proprietary nvidia driver with the nvidia-kernel package on testing.
View 4 Replies
View Related
Jul 10, 2010
I've been using ubuntu on a new desktop for a couple of months, but i had an old HP that was given to me in my basement. It has 384Mb of ram, and thats because i had a 256Mb stick laying around. I installed debian becuase it is more suited for older hardware (at least from what I've read). It installed fine, but it boots to a blank screen, and pressing ctrl+alt+F2 bring me to the command line. I checked /etc/X11/xorg.conf to change the driver to vesa, to find out my video card isn't even shown. I ran lspci and I found that it says my graphics card is Intel Corporation 82810E DC-133 (CGC) Chipset graphics controller (rev3) In the device section of xorg.conf, it merly says Identifier"Configured Video Device"
View 12 Replies
View Related
Mar 14, 2010
Last Thursday, 3/11, I installed a new mother board (ASUS M4A785TD-V EVO), AMD Athlon II X4 Processor, 4Gig DDR3 ram (RIP JAWS), 1 SATA DVD drive, along with my 2 IDE HDD's. The display was OK during BIOS review, and boot UNTIL it came to mounting x-graphics, at which point the screen went black, and a display message came up saying Out-of-RangeHf: 30KHz-70KHzVf: 50Hz-90HzCurrent Frequency:90.3KHz, 60.0Hz.
Does anyone know what is causing this? I mean, is there no way that Deb 5 X86 is going to run on a quad 64-bit system, or can something else be wrong? Before changing hardware, I had seen indications that this system was backward-compatible to older systems, and the more in depth study I've done since seems to verify this.y be, however, that I completely mis-understand what I am reading - this is all pretty new to me.
I tried booting into Debian 4, Libranet 3, and Linspire 6. They all complained loudly, but differently, about x being inoperable. I can't tell you how they complained because I can't go back and check them. THAT is because, in BIOS, I was testing the system with all the different options for "Internal Graphics", to see if one would work. One of these options was "Disabled". Oh-ho-ho! BAD MOVE!!! it's disabled, all right, including BIOS! I can't believe it. There was no warning, whatsoever. I assumed no engineer in his right mind would allow that option to lock out the BIOS without SOME kind of warning. I'm going to try to call ASUS tech support tomorrow to see if they have a solution, but if anyone knows how to reverse this, please let me know. I suppose the only answer is a separate graphics board. But I don't want to get that if I can't use this MotherBd.-processor setup.
View 11 Replies
View Related
May 17, 2010
When i use my computer (whether it's going online, typing, playing a flash game, or coding) I get these "Black Flashes" that are becoming longer and more frequent. A "Black Flash" is when my computer screen turns blank (but you can still see the backlight) and i have to press the NUMpad ENTER button, shake my mouse furiously, or click my mouse, which sometimes causes undesired actions, but gets me my screen back. sometimes the Black Flashes last a milisecond or 5 seconds or i have to hold the power button and restart because it won't come back on.
Specs:
Toshiba P205-S6337 Laptop
Ubuntu Karmic Koala
2.39 GB of RAM
[Code].....
View 9 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Jan 11, 2011
i have just put a Geforce 7300 GT graphic card into my machine the problem is the max resolution I can get is 1024x768 at 60 hz the screen is a benq fp71g+. also the screen goes blank when i click on the display icon in system settings. i know that the screen can be run at 1280x1024 so I don?t know where the problem is.
View 3 Replies
View Related
