Debian Hardware :: Adding TPLink 1200 USB Adapter
Mar 15, 2016
I have just taken the plunge and began learning linux. I currently have a compaq laptop which ive partioned to run windows/linux.I have Debian 7.9 installed, and have been able to surf online no problem with my ethernet, but have ran into big problem attempting to get the wifi to operate.
I checked online first to make sure the adapter i bought was compatible, which it is.So far i have done the following.
sudo aptitude install wireless-tools
sudo apt-get update && apt-get install firmware-iwlwifi
Ran lsusb..
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 005: ID 2357:0101
Bus 001 Device 003: ID 05e3:0608 Genesys Logic, Inc. USB-2.0 4-Port HUB
Bus 001 Device 004: ID 05c8:036e Cheng Uei Precision Industry Co., Ltd (Foxlink)
After checking online, it appears Bus 001 Device 005: ID 2357:0101 is the USB adapter.I then ran lspci
00:00.0 Host bridge: Intel Corporation ValleyView SSA-CUnit (rev 0a)
00:02.0 VGA compatible controller: Intel Corporation ValleyView Gen7 (rev 0a)
00:13.0 SATA controller: Intel Corporation ValleyView 6-Port SATA AHCI Controller (rev 0a)
[code]....
I then got instructions to do the following, but after entering the first line, nothing happened, the cursor just flashed at beginning of next line.
# sudo cp -R . /usr/src/rtl8812AU_8821AU_linux-1.0
# sudo dkms add -m rtl8812AU_8821AU_linux -v 1.0
# sudo dkms build -m rtl8812AU_8821AU_linux -v 1.0
# sudo dkms install -m rtl8812AU_8821AU_linux -v 1.0
View 14 Replies
ADVERTISEMENT
Jan 23, 2016
I cant scan in 1200 dpi resolution with xsane, it only shows (75,150,300, 600) range of scanning.
My printer is a Canon Pixma MP160, and it can scan to 1200 using xp in virtualbox..
How to get 1200 option in xsane?
View 0 Replies
View Related
Dec 18, 2010
I just loaded Fedora 10 onto my laptop and now I'm trying to add a USB wireless adapter with little to no luck (well no luck at ALL.)
# lsmod
Module Size Used by
nls_utf8 5632 0
fuse 49436 2
bridge 43796 0
[Code].....
View 5 Replies
View Related
Apr 21, 2010
I went to some one and he wanted me to install ubuntu on his system a few months ago. I installed Karmic and it have been working great unilt recently when I plugged in a PCI wlan card into his system now the system is not able to boot at all. It just stops after xsplash (hangs) Then today I tried to give Lucid a shot on the very same system and in Lucid it hangs at plymouth screen. even the live session does not start. I then pulled out the wireless card and now the system is able to boot and run. btw its an old optiplex 270.edit: windows xp is booting and running the wifi fine on the same system. and also Lucid live session booted once but not after that
View 1 Replies
View Related
Feb 9, 2011
I just purchased this card, but when I run iwlist scan it shows 'No scan results'. I'm using the rt2800 drivers - I saw a couple of posts about using the rt2870sta driver but when I did this it didn't even show up under iwconfig. I'm sat next to my router and I've tried it with XP and it seems fine.
View 2 Replies
View Related
Aug 1, 2009
How can i run internet in FC 10(KDE). I have wireless lan card in my pc.
TPLink TL WN353G.
View 1 Replies
View Related
Dec 15, 2010
My system is centos 5. but i could not install the tplink WR340G+ wireless usb card. how to install it?
View 7 Replies
View Related
Jun 26, 2010
I'm trying to activate a wireless network on an ubuntu server 10.04. The machine has a TPLink PCI wireless card. Card is well recognized, and scanning for wireless connection it finds correctly the essid of the access point in the room. But when I try:
Code:
$ sudo iwconfig wlan0 essid "apoint" key s:my_key_8
this error is returned:
Code:
Error for wireless request "Set Encode" (8B2A) :
SET failed on device wlan0 ; Invalid argument.I looked for similar situations over many forums, and I found that it could be the card doesn't support the encryption type (My AP uses WPA with TKIP). However if I use an ubuntu desktop live CD on the same machine, I can connect witouth any problem with NetworkManager 0.8.
View 2 Replies
View Related
Mar 5, 2010
I have tested this webcam with cheese, and it is able to take pictures and record video. However, the screen is pitchblack when previewing.
user@GIPbak:~$ lsusb
Bus 004 Device 005: ID 093a:2464 Pixart Imaging, Inc.
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 002: ID 0425:0101 Motorola Semiconductors HK, Ltd G-Tech Wireless Mouse & Keyboard
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 004: ID 0951:1624 Kingston Technology
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
The webcam is detected as an usb device, but previewing doesn't work. I want to use this webcam with zoneminder, and zoneminder requires the preview to work.
View 3 Replies
View Related
Mar 23, 2010
I'm trying to get an old Roland pen plotter to work on Ubuntu.So far I can't even see it. I'm using a Parallel to usb cable, which from other post may be a problem. I think the plotter works, it turns on and things move about as if getting ready to do a job.
View 4 Replies
View Related
Mar 7, 2011
i have been trying for a loooong time to have this scanner work, but to no avail. searching forums did not exclude it from possibly working, but could not find a definitive answer, nor a solution. in the past i tried to have it work under ubuntu, with no luck, and now i'm trying again the exercise with Fedora 14. my kernel is 2.6.35.11-83.fc14.i686.PAE
[Code]...
View 5 Replies
View Related
Apr 29, 2010
I have installed Ubuntu 10.4 on Virtual Box, i have installed it successfully, the only problem is when i check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop.
how i can increase / configure the display settings so that atleast i can fit ubuntu screen into my screen size.
View 4 Replies
View Related
Jan 3, 2011
I've only been using it for about 6 hours. I'm impressed by what I've seen so far, but I'm having trouble getting a higher screen resolution.
I have an Acer Aspire 5536 with an ATI Radeon 3200 graphics card. I installed Ubuntu 10.10 with Wubi to dual boot alongside Windows 7. When I go to change the screen resolution, I can not choose a higher one than 1366x768. I would really appreciate it if someone could help me get a resolution of 1920x1200.
Like I said, I'm a Ubuntu newbie (and I don't have much savvy on graphics cards either)
View 4 Replies
View Related
Jul 30, 2011
starting again with Linux since I crashed W7 and got tired of it. Running Ubuntu 1104 on Toshiba G30 with two drives. Installed 1104 on SDA
Two problems
1. On computer start-up it freezes, blank display with no action from the HDD
2. On selecting the HDD from the menu by pressing F12 and then HDD1 I get the same problem.
I can overcome this by changing grub to 'noquiet nosplash nomodeset' but then I get of course the full goomph on the screen. Could this be a display driver problem since I noticed that I can not get the full 1920 x 1200 resolution?
View 2 Replies
View Related
May 18, 2011
im am using a dell inspiron 1721 with an ati raedon 1200 series video card i need to know how to update it so that i can get compiz to work properly. (it worked for ubuntu).
View 3 Replies
View Related
Jan 2, 2010
mother board- M2A-MX
Chip-set- Ati x 1200
cpu- AMD 5600+
i am new to linux
I'm trying to run the 'ati-driver-installer-8.20.8-i386.run' program to install [URL]..
View 2 Replies
View Related
Mar 18, 2010
Whenever I restart my system, the screen resolution has been reset to 1600 x 1200. I change it in "configure desktop" and it's ok for the session but it changes back on reboot. Also, the font sizes are too small for xterms. Sure, I can ctrl+ to increase but why should I have to do this each time I login? I noticed others seem to be having this problem. Is there an upgrade that will fix this? I'm using 11.2 and kde.
View 9 Replies
View Related
May 4, 2010
I have installed Ubuntu 10.4 on Virtual Box, I have installed it successfully, the only problem is when I check the display settings it only have 2 options : 600 X 400 and 800 X 600 and this makes it difficult to work on Ubuntu as 800 X 600 is half the size of my desktop. How I can increase / configure the display settings so that atleast I can fit ubuntu screen into my screen size.
I did install the addition application, restarted the OS but still I don't see any display resolution 1200 X 800, tried pressing ctrl+D nothing happens, after installing I saw it updated mouse cursor now i don't have to press ctrl key again n again to enter into the ubuntu OS but still struggling with the resolution as it's too small, please guide me (here is the screen shot of my screen after installing the addition app).
View 2 Replies
View Related
Dec 4, 2009
F12 64 bit machine, connects to a Windows share to which a HP PSC 1210 is connected through a USB connection. Printer is set to share, nicknamed "Asterix". When the printer is set up through F12, I select under Network printer "Windows printer via Samba". I browse, find the printer, and click verify. The printer is accessible. Then I finish the installation, ordering a test print. Here the strange things start happening (attached some screenshots to back the story up).
1) No error messages appear that I can find. No cups-errors, no other errors pop up on the F12 machine. The print appears and disappears from the "Document Print Status (Asterix)" window. Only on the Printer Properties page do I see something strange: Printer state: Idle - procession page 2.
2) In the Windows machine, I also can't find any error messages. The print appears in the Printer list, and stays there. The printer comes to life, checks its cartridges, rolls some wheels, and then decides to do nothing more. When I select the print and click on Properties, the default priority is 1, but when I move it up to 99, nothing changes. The only strange thing here is, that the document, according to the Windoze machine, has 0 pages, yet is some 20MB.
And nothing ever happens.
Things I think it's not:
Firewall issue. The print obviously slips through to the other end.
Faulty driver issue. Directly from the Windoze machine, and if plugged into the USB of the F12 machine, does it print perfectly fine.
View 3 Replies
View Related
Nov 4, 2010
I have added a 10 Mbps network card to my SGI O2 MIPS workstation running Debian Lenny running the 26-2 kernel. The workstation already has an onboard NIC which is working fine.(eth0).
lspci -v shows ths card as:-00:03.0 Ethernet controller: Compex ReadyLink 2000 (rev 0a) Flags: medium devsel, IRQ 18 I/O ports at 1800 [disabled] [size=32] Upon googling I found out that this card is an NE2000 clone. I downloaded the latest 2.6.36 kernel sources and did the following:-
1. Make Menuconfig
2. Loaded an alternate kernel config file (my working kernel config file)
3. In DeviceDrivers->Network device support->Ethernet (10 or 100 Mbit)
I selected ASIX AX88796 as the help associated with this showed it as an NE 2000 clone. configured it to be a module and did make, make_modules and make_install. Edited /etc/Modules to load ax88796 and added an alias eth1 ax88796 to this file. copied the new kernel to the /boot and did a reboot, the machine booted up fine and udev -r showed the 2.6.36 kernel and lsmod showed ax88796 loaded. But, Iam not able to bring up eth1 using:-
ifup eth1
The error messages given are:-
SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
View 1 Replies
View Related
Jan 2, 2009
Is there any possibilities to make Creative HS-1200 wireless headset to work in OS11.1?
It shows up in Mixer panel, but i cant in any way configure it or make it work. It seems its been detected in some way, but i Yast-Sound it doesnt show up. Only in KMix.
View 3 Replies
View Related
Jan 7, 2011
I have another thread started [URL] asking for support on configuring a Netopia TER/GUSB-N USB Wireless Adapter. But, I figured it would be interesting to get some opinions about other wireless adapters. I don't mind shopping on eBay for a new adapter or purchasing one at Walmart or BestBuy. So basically, I wanted to find out which wireless adapters are guaranteed to work out of the box after installing Debian. I am setting up webcam servers throughout my house and want to use the same hardware as much as possible. So if anyone has any recommendations on a wireless adapter that is proven to work and work well, please let me know.
Here are three that I can get pretty cheap at Walmart: Belkin N150 Enhanced Wireless USB Network AdapterNetgear WG111 Wireless-G 54Mbps USB 2.0 AdapterCisco - Valet Connector (Wireless N USB Adapter) AM10-4A
View 7 Replies
View Related
Apr 11, 2010
I want to use a USB wireless dongle/adapter on my PC that has Lenny installed.
Are there issues with drivers/firmware that I need to be aware of or can I use a generic one?
View 6 Replies
View Related
Sep 18, 2010
Is Debian 6 going to support my WIFI card? Stable didn't support it. It says on the box of the edimax box that it supports Debian? Ever other OS supports it out of the box? That's the only reason I don't use Debian. Model EW-7128G [URL]
View 2 Replies
View Related
Sep 9, 2011
tonight my laptop with debian installed is no longer reading my wireless card. It has been working for quite some time and I really have no clue as to why it stopped. I did install some updates today, but they seemed pretty minimal. I got the card to work following the same thing I did to get it to work in ubuntu which can be found URL...So what can I do to figure out why it stopped recognizing it or to fix it?
View 6 Replies
View Related
Jan 7, 2011
The usb wifi adapter (airdata 150 s2 usb) which I have don't work well. The first time I put it on my computer does not work, so I installed this package [URL] but still not working. Then I search on intenet and found how to make it to work here [URL] that I do is add "blacklist rt2800usb" at the end of the file /etc/modprobe.d/blacklist.conf . After that usb wifi worked, but I have others problems. Some times it disconnect from the Internet and web pages are loading slow and some times do not load at all. Does any one know how I can make it work well? I am using Debian Squeeze.
[Code]....
View 2 Replies
View Related
Mar 29, 2011
I am preparing to install Debian. I use an USB-adapter for wireless network access, the chipset of the network card in the adapter is "Atheros AR9271". Using this adapter is my only means of accessing the internet.
For some reason I had a hunch that my adapter might not be supported in Debian. I started searching around and found that quite a few people have been having some difficulties installing it to work in Debian. So, when I will have installed Debian there seems to be a significant risk I won't be able to go online.
Since I don't have any other way of connecting to the internet, thus no other network card and no parallel computer to use, I will get in trouble when I have to try to get my adapter to work with Debian. That is to say, it will be impossible to search for solutions on Google, ask for help online etc. I want to forestall such a situation. Hence a few questions:
1) What exactly will I have to do in order to be able to use the adapter with Debian?
2) Is there any way of doing it without going online after I have finished installing Debian? I'm thinking about if it would, for example, be possible to include any required files in the installation package I will use to install Debian?
View 2 Replies
View Related
Jul 5, 2011
I currently know next to nothing about networks in Linux (yes I am working on that). I have just brought a Asus n13 wireless adapter after failing to get my laptop wireless working. I am using the 2.6.32-5 Debian squeeze kernel. The device connected once after I did the following:
apt-get update
modprobe rt2870sta
iwconfig
ifconfig wlan0 up
The device connected to wifi and was working fine. I then shutdown and rebooted to see if it would automatically connect on start up and now, although nothing seems to have changed and even after I repeated the steps above it did not connect. The network manager applet as well as listing the asus adapter(as ralink 802.11 WLAN) lists a Texas instruments PCI1410 pc card cardbus controller which i didn't before.
This is the output of iwconfig:
lo no wireless extensions.
eth0 no wireless extensions.
wlan0 Ralink STA ESSID:"" Nickname:"RT2870STA"
Mode:Auto Frequency=2.412 GHz Access Point: Not-Associated
Bit Rate:1 Mb/s
RTS thr:off Fragment thr:off
Link Quality=10/100 Signal level:-39 dBm Noise level:-95 dBm
Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
Tx excessive retries:0 Invalid misc:0 Missed beacon: .....
pan0 no wireless extensions.
This is lsmod | grep rt2:
rt2870sta 326811 1
crc_ccitt 1039 2 irda,rt2870sta
usbcore 98453 5 btusb,rt2870sta,uhci_hcd,ehci_hcd
View 10 Replies
View Related
Sep 5, 2015
I've installed Debian 8.1 on Lenovo G50-80 Touch. Ethernet is OK but the WiFi adapter is disabled. How can I enable it?
Code: Select alluname -a
Linux debianserv 3.16.0-4-amd64 #1 SMP Debian 3.16.7-ckt11-1+deb8u3 (2015-08-04) x86_64 GNU/Linux[code][/code]
[code]lspci -nnk | grep -i net -A2
02:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller [10ec:8168] (rev 10)
Subsystem: Lenovo Device [17aa:3821]
Kernel driver in use: r8169
03:00.0 Network controller [0280]: Qualcomm Atheros Device [168c:0041] (rev 20)
Subsystem: Lenovo Device [17aa:3545]
View 4 Replies
View Related
May 2, 2014
WG111v2 USB that works just fine on my Ubuntu 12.04 Dell can't connect on my Debian Gigabyte. It finds the network name just fine, remembers its password, and tries to connect 3 times before giving up. This tower is 4 days old, as is the OS.
View 1 Replies
View Related
