Debian :: Domain Name Of Network Required For Installation?
Oct 9, 2010
Completely new to Linux. I have two PC (both with Windows XP SP3) and an HP printer that are networked together with Ethernet cables and a 2Wire gateway. I now would like to install Debian GNU/Linux 5.0.6 on one of the computers and make it a dual-boot machine. The other PC will remain with Windows XP only. During the installation of Debian (5.0.6, 64-bit), I am asked to supply the domain name of the network.
It tells me that I can make up a name but to make sure to use the same domain name on all the computers. I have set up what Windows calls a Workgroup so that the two PCs can have access to each other's files. Would the name that I had assigned to the workgroup in Windows be what Debian is asking me about? The end result is that I want to be able to access Windows files and folders using Debian and vice-versa.
View 2 Replies
ADVERTISEMENT
Feb 16, 2010
Ubuntu Server 9.10I want to set up my dhcp server to also be my DNS server so do I skip these lines or point them at the same server that the config file is on?
View 4 Replies
View Related
Jun 9, 2010
I was wondering if there is any way to enable an MS Windows client that is otherwise unable of joining a domain to join a domain controlled by (open)SUSE? Is that inability only for joining a Windows based domain but a client that runs XP Home Edition or similar domain- incapable version of Windows could join a domain if it was controlled by Linux?Pardon my newbie style, but answer doesn't have to be detailed step-by-step, just yes/no answer with some pointers would do. I am not new to linux but new to network services... search engines weren't friendly when asked this question at the search bar...
View 2 Replies
View Related
Sep 3, 2015
I'm trying to set up a *simple* MTA in my local network. The only thing it should be able to do is send system / daemon mails to admin@mylocaldomain. but at the moment I'm pretty much overwhelmed by everything i *should* know in order to set up this MTA
my infrastructure:
- servers:
* test01.mylocaldomain --> should send mails (with exim) to admin@mylocaldomain
* dns01.mylocaldomain --> dns-server
* mail.mylocaldomain --> mail-server (postfix / iredmail package)
I configured exim to be in "internet"-mode. now i have a variety of errors I can choose from (and a variety of solutions that i don't like ).. my test is always an email from test01.mylocaldomain:
echo "Hello World" | mail -s Testmail admin@mylocaldomain
- after running the config, i get the error: admin@mylocaldomain: all relevant MX records point to non-existent hosts --> google says, edit and udpate update-exim4.conf.conf --> dc_relay_domains='mylocaldomain' --> but this exim installation should not be a relay at all. it should only be able to SEND (to this domain), not deliver it. or do i get something wrong?
- after i added dc_relay_domains='mylocaldomain', i get --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 550 5.1.1 <root@mylocaldomain>: Sender address rejected: User unknown in virtual mailbox table --> but i don't want to create an account on the mailserver for the SENDER...
- ...so i thought, i'd config exim with the domain "test01.mylocaldomain" (including the server name), so that the sender is clearly from another domain than the mail server handles (e.g. user@test01.mylocaldomain).. but then i get this --> SMTP error from remote mail server after RCPT TO:<admin@mylocaldomain>: host mail.mylocaldomain [192.168.x.x]: 450 4.1.8 <root@test01.mylocaldomain>: Sender address rejected: Domain not found
I really just wanna send mails in my local network.
View 0 Replies
View Related
Jun 7, 2015
I am tryint to install Debian Jessie on my desktop.My system configuration are:
Processor:- i7 4790k
motherboard:- Z97X-UD3H-BK-CF
ram:- 4GB DDR3
graphics card:- AMD radeon R9 200 series.
I am trying to dual boot here (Debian and Windows 7).I am trying to setup server here (trying my hands on first time.)I am getting the following error on the screen when i select to boot from Debian (windows boots up normally when selected in grub) I have attached the image,it states:-Radeon kernel modesetting for r600 or later requires firmware-linux-nonfree
View 14 Replies
View Related
Jan 12, 2010
what kind of network between cloud controller and nodes, is required for a proper cloud installation? I mean, Does all machines needs to be in same network, in same lan, or may be in MAN or WAN ? how much should be network throughput? 1Mbit/sec , 10Mbit per sec, or 1Gbit/sec? I ask because I need to know the possibility of running nodes on different locations.
View 1 Replies
View Related
Mar 6, 2011
I get the message when I try to deploy a virtual machine in the virt-mnager.
Unable to complete install: "Post operation failed: xend_post: error from xend daemon: (xend.err "Error creating domain: device model "usr/lib64/xen/bin/qemu-dm" not found")
Unable to complete install '<class 'libvirt.libvirtError'> POST operation failed: xend_post: error from xen daemon: (xend.err "Error creating domain: device model '/usr/lib64/xen/bin/qemu-dm' not found")
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 1555, in do_install
dom = guest.start_install(False, meter = meter)
File "/usr/lib/pymodules/python2.6/virtinst/Guest.py", line 973, in start_install
return self._do_install(consolecb, meter, removeOld, wait)
File "/usr/lib/pymodules/python2.6/virtinst/Guest.py", line 1038, in _do_install "install")
File "/usr/lib/pymodules/python2.6/virtinst/Guest.py", line 1009, in _create_guest
dom = self.conn.createLinux(start_xml, 0)
File "/usr/lib/python2.6/dist-packages/libvirt.py", line 1277, in createLinux
if ret is None:raise libvirtError('virDomainCreateLinux() failed', conn=self)
libvirtError: POST operation failed: xend_post: error from xen daemon: (xend.err "Error creating domain: device model '/usr/lib64/xen/bin/qemu-dm' not found")
View 1 Replies
View Related
Jun 25, 2010
In short: browsing the internet with domain names does not work. The long version: I've configured my network with DHCP and ifup. Ping works on my internal net and with servers in the internet. Dig work's too! I get the right IP to the requested domain. When i try to access the internet using firefox or even wget i get an DNS error. For example wget is showing the following error: Resolving heise.de... failed: Name or service not known. wget: unable to resolve host address 'heise.de'
Again dig show me the right IP and if i add the entry to /etc/hosts it work's too! I've even tried it with manually setup of ip address, nameserver and default gateway but with the same result. Switching off the firewall has no effect on this problem, too.
View 9 Replies
View Related
Feb 12, 2010
I wish to promote a "normal" installation of Suse as a domain controller with LDAP so the other computers in my network need to use a centralised username and password to log onto the machines.The only documentation I can find refers back to suse 9.
View 2 Replies
View Related
Mar 9, 2010
I would like to use a wireless network from Ubuntu. In the network drop-down menu I select a network (this is a University network I have an account there). Then I get a windows with the following fields:
Wireless Security: [WPA&WPA2
Enterprise] Authentication:
[Tunneled TLS] Anonymous Identity:
[] CA Certificate: [(None)]
Inner Authentication: [some
letters] User Name: []
Password: []
I put there my user name and password and do not change default value and leave "Anonymous Identity"blank.
As a result of that I get "Authentication required by wireless network". How can I solve this problem?
I think it is important to notice that our system administrator tried to find some files (which are probably needed to be used as "CA Certificate"). He said that he does not know where this file is located on Ubuntu (he support only Windows). So, probably this is direction I need to go. I need to find this file. But may be I am wrong. May be something else needs to be done.
View 2 Replies
View Related
Jan 19, 2010
I set up the 'Proxy' from Yast and they tested successfully. I can connect to internet, but why am I getting 'ERROR 407 proxy authentication required'?
FYI, my comp is the part of company .NET network with bunch of firewall and security...
View 4 Replies
View Related
Apr 18, 2010
If the wifi network gets disconnected why is the wireless authentication key needed again and again...cant ubuntu store and retrieve it...
View 9 Replies
View Related
Mar 25, 2011
I downloaded openSUSE-11.4-KDE-LiveCD-i686.iso from software.opensuse.org: Download openSUSE 11.4 yesterday.It's a liveCD,not a DVD. Then I used a dd command to make a live USB by the instruction from this page:SDB:Live USB Then I shut down the computer,and boot from the usb. I went to the yast--DSL to make a new adsl connection.But after I configured everything,yast told me one package needed.The package's name is "linux-atm-lib". I haven't connected to internet.How could I do to install a package and make a connection?
Now I am downloading a DVD.Does a DVD include the package called "linux-atm-lib"?
View 2 Replies
View Related
Nov 15, 2010
I've been having issues with my ubuntu server (10.04 LTS) lately. Every once in a while, anywhere from 3 days to a month or more, the server will just disappear from the network. All manner of trying to reach it from the outside fails, even from the LAN. Since it's headless, this is kind of problematic. After a hard power down or reboot, the server will always come back online, but this is very annoying for a remotely administered server.
What should I look for when trying to determine why the server keeps going offline? I can't tell if there are any other issues like a hard lockup or anything, just that it is not on the network anymore when this happens.
View 9 Replies
View Related
Jun 12, 2010
Im trying to find out What all network hardware is required for a successfull Iscsi setup. Example Do you need two network cards that support it. Or do you just need one network Iscsi adapter for the storage box, and the other machine just have a normal NIC. What type of Switch would be needed as well for decent transfer rates.
View 2 Replies
View Related
Mar 22, 2011
I have gone through a good number of distros all the way back to Slackware but I'm struggling to get my brain moving in the right direction again. I am working to enable sendmail and, from what I've read, it appears that newer version of sendmail are installed with milter but I can't seem to locate this. I am running v11.4 so I'm wondering if this is just not the case? I don't have a problem reconfiguring/recompiling the sendmail conf files but would rather not if it's not required. For the record my ultimate goal is to have the spamassassin and clamav milter's installed and using the home server as our primary email.
View 7 Replies
View Related
Jun 8, 2010
When my router switches off... the wifi signals go off... then why the hell ubuntu keeps on connecting to that very wifi like hell and when doesnt connect shows the prompt to manually connect... with the wifi key already filled in... whats the use of saving the key when it has to ask the question from me either to connect or not?? and if its isnt available... just wait when its available.. and for the prompt,i have only option to cancel(because wifi isnt available at that moment if i select connect it again tries to connect like hell..which it cant) and if i cancel it wont auto-connect when wifi does get available! what the heck?
Windows has this done the right way... when the wifi isnt available.. it dissconnects silently.. and when it becomes available connects silently.. why isnt this been done this way in ubuntu??
Ive attached an image..one can see in the image that it says "authentication required by wireless network" when there isnt any.. as router has gone down!
And the second thing i want to report is that there is no way to report this bug from ubuntu... the launchpad.net talks of going through bug reporting process which is done against a definite package... now how does a user know which package would be causing this error?? there should be a more clear process of reporting such bugs to ubuntu team... which a common man using ubuntu( ubuntu says its most user friendly of all distros right?) can report..
View 1 Replies
View Related
Aug 20, 2010
Config: Squeeze, 2.6.32-5-amd64I just installed squeeze and the network is up and nm-manager deamon if working but the Gnome applet doesn't seem to work as usual. It indicates no network although the network is available as indicated by ifconfig and route below. When I switch WiFi on, the nm works flawlessly. When I click on the applet icon it says "Wired Network: device not supported" (or similar, msg in french is
eth0 Link encap:Ethernet HWaddr 00:1f:e2:12:ea:d8
inet adr:192.168.0.182 Bcast:192.168.0.255 Masque:255.255.255.0
adr inet6: fe80::21f:e2ff:fe12:ead8/64 Scope:Lien
[code]...
View 3 Replies
View Related
Mar 22, 2009
We have a networked L7780 and I cannot find the dependancies below to satisfy the hplip (3.9.2) installer. Centos 5.2 Server - full development environment etc. Standard Centos repos + rpmforge.
INSTALL MISSING OPTIONAL DEPENDENCIES
-------------------------------------
warning: There are 6 missing OPTIONAL dependencies.
note: Installation of dependencies requires an active internet connection.
warning: Missing REQUIRED dependency for option 'network': libnetsnmp-devel
[code]...
View 4 Replies
View Related
Aug 5, 2010
I am using opensuse 11.2 with a server that has a static ip from my isp and the ip is working. I have tried with an old domain but I cannot try anymore with it. I have installed yast dns server and configured it normally. When I will buy a new domain i will asign those nameserver(s) to ns(x).domain.com with my ip address.
When the changes will take effect at the registrar it will point to my dns server. I have added two forwarders to my isp domain name servers and a zone with mydomain.com and for testing I don't have firewall. The dns server is started at boot time. That's all that is required to be done? I have to set other things before I buy the domain?
View 4 Replies
View Related
Oct 7, 2010
I'm trying to set up an openSUSE 11.2 host as NIS client and I would like to knowwhether or not it can be client of two (or more) NIS domains. The reason is thatsome users are authenticated on server1 (nis-domain1) and some others on server2(nis-domain2).Trawling the web, I found a HP document stating that a client can belong to one NIS domain only. However, the yast NIS client interface allows adding NIS domains/servers to the seemingly default one. I'm totally confused.I made the following experiment:1. declaring nis-domain1 in /etc/defaultdomain and server1 in /etc/yp.conf: ypwhich returns server1, ypcat passwd lists the users on server1.2. in the yast interface, I added nis-domain2 and server2; in /etc/yp.conf, there is an extra line "domain nis-domain2 server server2". After reboot, ypwhichreturns server2, ypcat passwd lists the users on server2. But now the maps from server1 are no longer available.
View 4 Replies
View Related
Mar 2, 2016
How to compile mpv on wheezy? if requires nowadays "harfbuzz" and says
configure: error: Either DirectWrite (on Windows), CoreText (on OSX), or Fontconfig(Linux, other) is required. If you really want to compile without a system font provider, add --disable-require-system-font-provider
but if if i do
./rebuild --disable-require-system-font-provider
is still get same error. i really need mpv on wheezy because jessie is too new for system. it used to work some months ago.
View 1 Replies
View Related
Apr 19, 2011
Sometimes when we update/upgrade packages we get the restart required icon on the desktop panel which means we need to reboot for the update to complete. Is there someway to know which or what package required the reboot to happen ?
View 4 Replies
View Related
Feb 28, 2011
I have a headless server which I have recently clean-installed debian6 on. I want to install fluxbox (I connect remotely using No Machine). I had a similar setup with debian5 earlier but have lost the notes I made during the previous install.When I google minmal gui installs, there are different 'recipes' concerning which base packages for x are necessary e.g. xorg, x-window-system-core etc.Which packages for x should I choose (and why)?I don't use a display manager (gdm etc.), and the hardware is not so powerful (via en12000).
View 2 Replies
View Related
Jul 12, 2009
I'm trying in the company where I work to persuade my co-partners to move slowly into the world of linux, but because everything are set up on Windows is quite difficult. Though I can install at least in one PC openSuse or Ubuntu (I prefer openSuse), but the problem is that I have to find a way to make the authentication to a Windows Domain, which is running Windows Server 2003.
How is this possible? Is this procedure painless or I have to read a lot of staffs in order to make it work? I would be obliged if you could give me some steps on how to do it. I can't stand windows any more
View 5 Replies
View Related
Nov 19, 2010
Where can I find information about how to get OpenSUSE 11.3 to join a Windows Domain that uses Kerberos?
View 1 Replies
View Related
Feb 15, 2011
Have a domain registered on a public ip. The domain server for the domain is on the same local network as the web server that uses the domain. The web server naturally has a local and public ip address.
The problem is that whenever I try to access the domain from my local network the lookup for the domain fails, as it cannot find the server from the local network. What's the most painless solution to this problem?
TL;DR: need for my domain to be accessible from both my local network and the outside world, now it's only from the outside which is a problem.
View 9 Replies
View Related
Mar 30, 2010
I find it hard to explain but I will try. I have a small network using CentOS 5.4 with a static ip and I am running a web server which has an local ip of 10.1.10.100 and has the domain name of www.inwoon.net.My problem is I have other computers on the same network and can only access the web server using 10.1.10.100 instead of www.inwoon.net. am finding it to be impossible to test my web site work using external links that call back to my site
View 8 Replies
View Related
Feb 22, 2010
I have two types of OS in my network windows (XP,7) and linux (debian 5.03, ubuntu 9.10 8.04, fedora 8) all of linux can see an reach the windows shared folders but windows can not reach linux shared folders what can I do fo fixing this problem what should I follow. I have to say I disabled all of windows firewalls; and all linuxs can reach each other shared folders. (My network is Workgroup not domain).
View 2 Replies
View Related
Nov 29, 2010
Wubi 10.04 could not retrieve the required installation files
View 4 Replies
View Related
