Debian :: Debugging Package Installation Failure ?
May 12, 2010
I installed a packge redmine apt-get install redmine It went without any error. But I found later that it was not working. Another package I installed was red5 during installation it says it can not start red5-server. How can I debug the package installations. If there would have been some script I would have set some thing like set -vmx in it.
As an example while installing red5 I got a message to issue the following
Code:
See [url] for more information about dependency based boot sequencing. To reattempt the migration process run 'dpkg-reconfigure sysv-rc'. Even then it failed.
View 1 Replies
ADVERTISEMENT
May 1, 2010
I have just installed Ubuntu 10.04. When trying to run a Java Applet on a web page I discovered that Java is not installed in 10.04 and the SUN Java JRE is not available to install any more so I installed the OpenJDK and IcedTea Plugin.
Most applets work fine but one specific, for me a very important one, dos not. Specifically the log inn applet used in my net bank: URl... See login entry on top left.After entering userID I am redirected to a page giving the following error message:HTTP 404 - The resource cannot be located. The file cannot be found. This applet runs fine in Windows.I have started Firefox in a terminal window but do not get any error messages there when trying to start the applet.The applet runs fine in Opera (though slow start up) in Ubuntu 10.04. Opera does not use plug in but run the applet directly from JRE. This indicates that the problem could be in the IcedTea plugin.
View 9 Replies
View Related
Apr 25, 2015
Ever since I started to tinker with GNU/Linux on my machine, ACPI has been a thorn in my side.
I can't find any BIOS updates or DSDTs for my laptop, either.
The only distro I've ever gotten to boot without acpi=off is Fedora 20 with the 3.11 kernel and nohz=off parameter. Which leads me to believe a change in the kernel after 3.11 is to blame.
Anyways, I have installed wheezy 7.8 XFCE with LVM encrypted, but alas I am stuck booting with the ACPI=off parameter.
The installation CD booted perfectly, with my wireless card working (an indication of ACPI functioning) as well.
This leads me to believe that it is possible to have a stable wheezy install on this machine.
The install disc used the parameters: video=vesa :ywrap,mtrr and vga=788.
I tried these, but the boot hanged after "switching to clocksource: acpi_pm".
How I could track down the problem with ACPI on my machine?
View 1 Replies
View Related
May 28, 2011
I,ve tried upgrade from F14 to F15 using preupgrade, but I run into serious problem. Preupgrade downloaded all packages without problem and prompt me to reboot. After reboot installation process went ok. It was upgrading cca 1650 packages. But installation hung around package 1600 (almost on end) with message that openjpeg-devel-1.4-6.fc15.i686 cannot be installed and only option to end installer. After reboot I ended up with "kernel panic - not syncing: VFS: unable to mount root fs on unknown-block(0,0)". It is still possible to enter grub menu, where I can choose upgrade to F15, but it fails again on that openjpeg-devel package. When I enter terminal after failure, I can see package is downloaded in preupgrade repo (and after moving somewhere else and running upgrade again it I got message that package is missing). Is there any possibility to skip this package installation or only option is fresh reinstall?
View 10 Replies
View Related
Apr 4, 2011
installed ubuntu 10.04, i possess the BSNL EVDO AC8700 , i downloaded the package for the same from the zte website but when i try to install it its giving the following error
"
(Reading database ... 123335 files and directories currently installed.)
Preparing to replace crossplatformui 1.0.27 (using .../CrossPlatformUI-V1.0.27-B
[code]....
View 2 Replies
View Related
May 21, 2009
Does anyone know how can one improve his debugging skills or how can one narrow down the problem and try to get to the solution ASAP.Or rather how once should approach a problem.I know this is a bit vague question but I want to know how you people approach?
View 3 Replies
View Related
Aug 17, 2011
I'm new to this system and trying to install plug-ins but I always seem to get some sort of rejection..
[root@localhost haley]# yum install vlc
Loaded plugins: langpacks, presto, refresh-packagekit
[Errno 14] curl#6 - "Couldn't resolve host"
Trying other mirror.
Could not retrieve mirrorlist...^... error was
14: curl#6 - "Couldn't resolve host" .....
Error: Cannot retrieve repository metadata (repomd.xml) for repository: rpmfusion-nonfree. Please verify its path and try again [root@localhost haley]#
So then I checked to see if I had rpmfusion-nonfree, and I do. I really have no idea what to do, I have spent hours trying to get this work. I want to be able to open any media file, avi, wma, mp4, etc.'m using Fedora 15.
View 2 Replies
View Related
Mar 1, 2011
I've just tried to install Squeeze on my guest partition, using a magazine disk that offered a live CD version with installer, which I ran in text-based expert mode. The process was not a success.
1. The routine for installing grub claimed (hd0,2) was the same as /dev/hda2
2. Starting Debian's grub from the Fedora bootloader with chainloader failed
3. A conventional start revealed all sorts of problems, ending with "/bin/sh can't access tty"
I can't believe Debian could produce something like that! Has anyone here used their live CD as an installer? Tell me this mess is down to Linux Format magazine!
View 4 Replies
View Related
Aug 3, 2010
I've compiled 2.6.35 for my eeepc, but I have noticed that resulting .deb file is 30mb large. After investigating i saw that modules (and maybe kernel) are compiled with debugging symbols enabled.I've checked my lenny router and modules there are without debugging symbols.So stock 2.6.26 from lenny comes without debugging symbols and linux-image .deb file is around 20mb.Stock 2.6.32-5-686 from squeeze comes with debugging symbols enabled - linux-image .deb here is 26mb. (I have used 2.6.32's .config file to build my kernel, then i did make oldconfig.)I guess this is what increase my kernel size, but how to disable it?Or maybe enable stripping of debugging symbols.
View 3 Replies
View Related
Dec 2, 2014
This is a new install of debian 7.7 amd64 on the following new hardware
MSI A78M-E35
A6-6400 APU
Basically I am unable to get gnome 3 to run (it defaults back to some legacy ver). I tried a few other distros out there FC17 worked but FC20 failed. Just tried Debian Jesse it works after installing linux-firmware-nonfree but want to stick to a 'stable release'
dmesg says i need to install firmware-linux-nonfree so i did that but to no avail. Here is dmesg:
[ 0.203992] pnp 00:0d: [io 0x00a2-0x00bf]
[ 0.203992] pnp 00:0d: [io 0x00b1]
[ 0.203992] pnp 00:0d: [io 0x00e0-0x00ef]
[ 0.203992] pnp 00:0d: [io 0x04d0-0x04d1]
[ 0.203992] pnp 00:0d: [io 0x040b]
[ 0.203992] pnp 00:0d: [io 0x04d6]
[Code] ....
View 14 Replies
View Related
Dec 28, 2010
What's the best way to debug an automatic installation. I created an iso with a custom menu and that all seems fine... but when I launch my new menu item I get a blank screen with a blinking cursor and nothing else.
View 7 Replies
View Related
May 13, 2010
The installer for powerpc is broken in Squeeze. If yaboot is installed, it will break the whole boot process. I don't know exactly what goes wrong but it is a serious bug. I tried many times until I found out that yaboot is broken in Squeeze. In Lenny it still works luckily, so I could get something back after a complete sweep of my hard disk (the Lenny installer could not do anything with the ext4 partition of Squeeze as it is not supported in Lenny, so trying to put yaboot back did not work from there). Let this be a warning to people and a reminder for developers that there is a serious bug in yaboot.
View 2 Replies
View Related
Jun 20, 2009
I get the following result on trying to launch synaptic package manager gui:
View 9 Replies
View Related
Nov 30, 2014
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15
Core i5 421-U
4GB DDR3L
750GB WD hard drive
15.4" 1366*786
View 14 Replies
View Related
May 10, 2010
I tried to intall DEBIAN on a P6 machine(Power 570 processor)'s LPAR. Using debian-504-powerpc-DVD-1.iso from http://cdimage.debian.org/debian-cd/5.0 ... c/iso-dvd/I used "install64" option and it completed normally. All using default/recommended options during the installation. i.e. whole disk, one filesystem, etc.However, after the installation(seemed succesful), I got the following error during reboot."root=/dev/sda2:2,/vmlinux: Unable to open file, Invalid device"
View 1 Replies
View Related
Jan 5, 2011
I just installed the lenny (amd64) on my new core i7 870 computer (with netinst), but the kernel failure message appeared everytime I booted into gnome. I don't know how to solve this problem. Sorry I don't have much experience with installing linux, though I have been its user for a few years.
View 4 Replies
View Related
May 10, 2011
I'm trying to net install Wheezy on an Abit IC7-G PIV system. I tried this months ago but the problem still exists. This is not so much an installation problem but after installation when it boots, I lose PS/2 mouse, PS/2 keyboard and network. I get:
startpar. service(s) returned failure udev ... failed I can plug USB mouse and keyboard in after this failure which then works. There is nothing wrong with the hardware. It works fine on other systems. Squeeze works perfectly.
View 7 Replies
View Related
Aug 5, 2014
So, I am having certain issues regarding Debian installation. Since my Wi-Fi card, Intel PRO/Wireless 3945ABG, requires non-free drivers not provided within Debian install image, I am bound to use USB stick during installation process to get those drivers, iwlwifi-3965-1.ucode and iwlwifi-3965-2.ucode, to enable Wi-FI on my system. However, no matter what I do, I cannot get debian-installer to detect drivers present on the machine. I have tried virtually everything - downloading drivers from multiple sources, renaming drivers properly, using ext4 instal of fat32, using gpt instead of msdos, placing files in /firmware instead of root directory - but no matter what I do, the outcome is the same. USB stick seems to be working properly. Am I bound to downloading non-free image now, or is there a solution?
View 9 Replies
View Related
Sep 12, 2010
When you get to the package installation you get by default:
Desktop Environment
Standard System
Which i disable for my minimal installation.Out of curiosity, can somebody tell me what is installed with the Standard System?
View 3 Replies
View Related
Aug 16, 2010
How to install package in Debian?
I had try to install "wireless-tools" in debian
apt-get install wireless-tools
I got error
E: Couldn`t found package wireless-tools
How to ?
View 2 Replies
View Related
Jun 3, 2015
I am attempting to install some applications on Debian 8 Jessie, with Gnome Desktop, and every package I try to install keeps coming up with the error E: Package Not found, I have been searching then trying for a solution on the Web, which includes apt-get update, and there are none for Debian 8 at all.
View 14 Replies
View Related
Dec 2, 2010
im currently setting up debian on a spare box i have and have been useing the advanced install so i could use the ssh ability to continue the install from a different computer. what i want to do is add the ssh to the install so that when the system boots with out the disk i can get into it with out having to wake up my nephew. is this possible or will i have to wait till i have access to the system to install the ssh server?
View 1 Replies
View Related
Dec 16, 2010
With Ubuntu i used some software which only had an installation procedure or a package for ubuntu. Program's such as Ailerus or Usenet Resource Downloader. What i would like to is this: Since Ubuntu is Debian-based, is it possible that software, intended for Ubuntu, can also be installed under Debian? Or is there a slight difference in structure between debian and ubuntu that makes it almost impossible to add software, intended for Ubuntu, under Debian?
View 14 Replies
View Related
Sep 7, 2011
I was recently pushed back towards linux after spending nearly a decade in a windows only environment and I'm finding myself struggling. The reason for the change is that we purchased Kaspersky and the mail gateway is only available under linux. They advised Debian and Exim.
The crux of the problem is that I have a working debian server running with exim4 and kaspersky to act as a gateway mail server but it's not checking inbound mail against the internal servers address list. For this I need to add ldap support to the exim package but I'm not sure how to do this - it seems silly that I should have to start over at this stage.
Full details:= I didn't have too much trouble installing and configuring a debian 64bit server for our network, adding exim4 and getting it all set up to work, then several weeks of hot fix releases and "oh, it shouldn't do that" passed as we attempted to get the Kaspersky software operating properly. During that time I learned that the kaspersky software does not provide a function to check inbound emails against the internal server. Previously we did this with an LDAP lookup under the Sophos Puremessage software that Kaspersky replaced. Without this function the MTA sends out a lot of backscatter that results in the server being put on blocklists and that effects business. Kaspersky tell me this is something I need to set the MTA software (exim4) to do so I've looked that up and it appears that step 1 is to install exim with ldap support... but I've already installed and configured exim without ldap support. So I'm not sure if I have to start over by removing exim, install over the top or what. Also if I do add ldap support or install exim-heavy over what I have will I need to reconfigure everything I've done so far?
as I said, it's been 10 years since I used linux and even then it was fairly basic sendmail and apache stuff.
View 1 Replies
View Related
Jan 18, 2010
Every time i start with a new installation, i have to download all the useful software once again...
i think it would be simple and easy-to-use if these software could be bundled into debian packages which can be installed just by clicking (like in windows)...
Is there any website where I can find debian packages for important software? Or can I create them myself...
View 5 Replies
View Related
Feb 25, 2015
I have a project and would like to create a .deb package that brought on any computer with debian distribution installs it in your home user who is installing.I followed a guide and managed to create a deb package from my sources with FPM. But creates them with root permissions and tells me that I should create a script before installation to change the permissions.
View 2 Replies
View Related
Apr 27, 2015
After Updating to version 8.0 today...
Package Updater GUI is Failing with the message:
No updates are available
No network connection was detected.
=================================
I did updates almost daily on wheezy
Todays updates [via the Pkg Updater GUI] were over 300 meg.
After the updates and reboot
System was showing version 8.0 in the GUI desktop and using 'cat /etc/debian_version'
Then...
From terminal I did ...
apt-get update
apt-get dist-upgrade
The dist-upgrade was over 40 minute and ~ 500meg
Things seemed to go well.
I updated sources.list with apt-spy.
[In order to trouble-shoot: I subsequently commented-out the apt-spy sources and found some generic sources on internet]
==========================================
# sources.list generated by apt-spy v3.2.2
#
# Generated using:
#
[Code].....
apt-get and Synaptic GUI both work.
I did/reviewed some settings in the Synaptic GUI I imported two v8 signing keys into Synaptic from [URL]
Package Updater GUI is Failing with the message: No updates are available No network connection was detected.
View 5 Replies
View Related
Jan 8, 2016
I have installed Package: gnumeric (1.12.18-2) in my Jessie/Mate system. It is very jittery on scrolling, and I was wondering if I should upgrade to the version (1.12.26-1) in stretch(testing), as there seem to have been a large number of bugfixes.
I have tried the following simulation command, but it gives the error message shown:
Code: Select all~# apt-get --simulate -t stretch install gnumeric
Reading package lists... Done
E: The value 'stretch' is invalid for APT::Default-Release as such a release is not available in the sources
The documentation suggests that I may need to create an apt preferences file. I do not have any of the following files mentioned by the apt-get man page:
/etc/apt/preferences/etc/apt/preferences.d/etc/apt/apt.conf
What I would like to do is upgrade just the specific package jessie/gnumeric(1.12.18-2) to stretch/gnumeric(1.12.26-1). I do not want any other packages to be inadvertently upgraded to stretch. I have seen warnings that one can easily end up with a badly mixed system and I wish to avoid that! I also do not want to disturb the standard apt-get update, which I am running daily via anacron at present.
View 14 Replies
View Related
Jan 25, 2016
Musescore 2.0 is available but only for Sid, I have just installed Jessie since I wanted the stable version. I was wondering if it was possible to install that packaged only from the sid distribution on jessie. How should I proceed?
View 9 Replies
View Related
Jun 30, 2010
Recently tried to install a new Wine package, but the install failed, so I removed it and reinstalled the old one. That installation also failed, and now the package is in a half-installed state and can neither be installed nor removed. I'd be most grateful for some help - I miss my Wine!
# apt-get install 0.9.47~winehq0~debian~4.0-1
Reading package lists... Done
Building dependency tree... Done
E: The package wine needs to be reinstalled, but I can't find an archive for it.
# apt-get remove 0.9.47~winehq0~debian~4.0-1
Reading package lists... Done
Building dependency tree... Done
E: The package wine needs to be reinstalled, but I can't find an archive for it.
What does it mean by "an archive", and where can I find one?
View 3 Replies
View Related
