I had directory inside www that is gone. I am not sure if I removed it my mistake somehow or there is something weird going on. How would I track down what happened to this directory?
View 2 RepliesI have server with Debian and Apache installed. Webpage content located in /var/www folder. For failserver I have Windows server 2003, which runs Mysql service thats needed for library software. And on this machine theres Inetpub/wwwroot with library webcontent. Sofar its only accessible localy. How can make Apche webserver to take content from this local server machine and show it publicly.
View 14 Replies View RelatedI have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
I've got a problem when I try to use to load modules like when I try : modprobe tun It says : FATAL: Could not load /lib/modules/2.6.32-4-pve/modules.dep: No such file or directory I've checked in my filesystem, the directory 2.6.32-4-pve doesn't exist, instead I have 2.6.39.2.110628 So how could I make modprobe look into the right directory ?
View 4 Replies View RelatedWe copied the directories/files from one filesys1 to filesys2 and since that initial copy have further added more directories/files to filesys2 from another source. How can we compare filesys1 to filesys2 to make sure all files/directories were copied successfully to filesys2? I would like a way to check filesys1 against filesys2 and only show/output when something is missing from filesys2 that exists in filesys1 and not report the additional/extra directroies/files that have been copied to filesys2.
View 3 Replies View RelatedI wish to compare all the files in a directory....comparing is by content. And same files should be printed...
echo "program : $0"
cd $1
for a in *
do
[code]....
This logic did not give the correct result...
I am new to linux and wget...what would be the syntax to use wget to move content from one local directory to an svn repository (svn commit)? For instance if i have a directory c:\dir1, and i want to move it's content onto an SVN repo...is this possible using wget? If so, how do I get this done?
View 2 Replies View RelatedI want to view directory content in apache server, for that i configure apache server, but i don't know how to enable autoindxing module, only apache test page is opening when i open my web site.
View 9 Replies View RelatedSetup a DNS/DHCP/Directory server on Debian? I would like to configure the things in Debian so that can join Linux and Windows(if possible as m not sure yet) clients to the directory server. Any links to setup both Forward and Reverse lookup zone in the environment.
View 4 Replies View Relatedi have created a wordpress user with a symbolic link from his home (/home/wordpress) to /usr/share/wordpress but when wordpress ftps to wordpress home dir it does not follow the sym-link. is there a way to set default ftp dir for the wordpress user to /usr/share/wordpress rather than /home/wordpress?
View 6 Replies View RelatedI am using Debian Lenny as my server to host multiple databases.
Whenever, I used to add a new database, I used to add an IP address like eth0:test in the /etc/network/interfaces file.
Today when I tried to do the same, I got an error when I tried to start the interface by typing "#ifup eth0:test". I also tried to do in this way "#ifconfig eth0:test up" but both of then yielded the same error saying "/sbin/ifconfig: no such file or directory".
The path is valid and the files are also present there. There are ifup, ifdown, if and ifconfig files in the /sbin directory. I also checked the permissions which is root:root. But still I cannot find the problem.
I have one of my user's home directory on a seperate partition, and I was wondering if there was a way to only mount it when/if the user is logged in and unmount it if they log out.
View 1 Replies View RelatedI recently bought a new hard disk for my /home tree. I don't have encrypted home directories currently, but I was wondering if there is an easy way to encrypt my home directory so that it is automatically decrypted when I'm logging in (console/kdm). Basically I would like to manually do same thing as Debian installer would have done.
I'm running Squeeze.
how to find the latest modified directory. I know that the command 'ls -rtl' gives the latest modified file/directory at the end. But my specific requirement is: If I create two directories named dir1, dir2 in the same order. so now my latest modified directory is "dir2". Now inside each directories, I created a file. Now in the last, I modify the file in "dir1". So overall, the content of dir1 got modified recently. If I use the command 'ls -rtl', this will still show dir2 as latest, as it is created recently. But I want the directory in which any internal content at any sub-hierarchy modified recently. so with what linux command I'll get this latest modified directory (dir1)?
View 3 Replies View RelatedI work in a compagny and i encounter a problem with the samba trash.When i delete a file from our network directory, the file don't move to the samba trash directory. But, the server create the same samba tree like the orginal file. It's more simple with a example.This is the file i delete to my samba tree S:departementgestion_informatiqueinformatiquecommut est.txt.This is the samba tree that the server create at the moment when i delete my file : @IPcorbeilledepartementgestion_informatiqueinformatiquecommun
The problem is here : We want the file test.txt into this trash tree and it isn't.This is the Samba trash configuration :
# Samba Trash
#--------------------------------------------
# http://samba.org/samba/docs/man/Samba3-HOWTO/VFS.html
[code]....
The samba trash work for an another site of our company.
I've been working on building an LTSP server for diskless booting. I have a tftp server that's booting the system. I followed the steps on [URL] .... to build the LTSP server.
I had to make one change from the guide. I have a cisco router that's acting as the DHCP, I'm not very familiar with Cisco IOS so instead of playing with that, I decided to modify the default file on the PXE.
I commented the kernel append line and added the following instead
/srv/tftp/ltsp/amd64/pxelinux.cfg/default
Code: Select allappend initrd=initrd.img-3.16.0-4-amd64 init=/sbin/init-ltsp root=/dev/nfs rw nfsroot=10.0.5.99:/opt/ltsp/amd64 ip=dhcp
I'm mounting the nfs as a rw file system for now. I'm planning to make it read only once I have it working the way I want. In addition to this, I also chroot into the LTSP root and installed lightdm + mate. As I understood what I read, this would boot the environment on the diskless system. All of this seem to work correctly.
What I need to do next is to find a way to setup the LTSP clients to log in by authenticating on the active directory. I understand that the login account used by the LTSP client has to exist on the LTSP server.
I have successfully added the LTSP server as a worksation within the windows domain and I can log into domain accounts from the LTSP server but domain credentials do not work when using an LTSP client, I can only log in if I use an account that exists on the LTSP server. I wanted to know if there is a way to accomplish AD authentication.
Do I have to build an LDAP server on the LTSP server, sync accounts with the Active Directory to be able to log in with AD credentials?
I am planning to build a server in future. That will be a computer with GNU. It will be a router and file server. It will get the VPN-Internet and share it with all the PCs connected to LAN. There will be Samba for file sharing. And I'm thinking that if I just share some directory on that server with Samba, it will be possible to get access to that dir from VPN. So it's not very safe to do that. Is it possible to prevent access to Samba dir from VPN connection?
View 7 Replies View RelatedI recently reinstalled Lenny and I am attempting to save my /home directory. I used the graphical install and when it came to the part about partitioning, I created a new /home partition "hdb1" and told the installer to ignore my old /home partition "/dev/hda9".Following the completion of the install, I logged in and changed my /etc/fstab so that /home --> my old /home partition "/dev/hda9". I then mounted the old partition to /home and rebooted the system. Now, when I go to my /home directory >> properties, I can see that the files I had are on the drive (2GB are used) --- but --- I cannot actually see the files??
View 1 Replies View Related2 of us have been googling all morning trying to find out how we can restrict ftp logins to their own home directories only but nothing we've found so far has worked. We've tweaked sshd_config so that they default to their home directory but they are able to navigate up/across/down to everything. This is a "straight-out-of-the-box" debian 5.0.5 Netinst. Just a basic system with Apache/MySql/PHP/SSH and no desktop.
View 6 Replies View RelatedI followed this doc for the "debian method" for building the kernel: [URL]. I installed the source in /var/tmp/src/linux-2.6-2.6.32 , configured it, and tried make-kpkg modules-image. The error I get is:
checking for current directory... /usr/src/modules/alsa-driver
checking cross compile...
checking for directory with ALSA kernel sources... ../alsa-kmirror
checking for directory with kernel top-level makefile... /var/tmp/src/linux-2.6-2.6.32
checking for directory with kernel headers... failed
make[2]: *** [configure-stamp] Error 1
make[2]: Leaving directory `/usr/src/modules/alsa-driver'
make[1]: *** [kdist_image] Error 2
make[1]: Leaving directory `/usr/src/modules/alsa-driver'
Module /usr/src/modules/alsa-driver failed.
I tried some hacks such as setting KBUILD_SRC or ln -s linux-headers-2.6.32-5-amd64/ /usr/src/linux - but these fail too.
I need to add another user besides the one set up during the installation procedure but I also need to limit all users to use only their own /home/user directory.
View 4 Replies View RelatedI followed these steps to add a client to my active directory domain, everything is working as expected except that when a username has whitespace it creates a directory in /home with whitespace and gconf fail to access his config dir in the user's home. KDE also fails to start but I don't know what's failing yet. I found that the easiest way to fix these issues is to replace whitespaces by underline in homepaths so I changed the pam_mkhomedir source to replace the whitespaces and save it using the usermod command. It should work but is not... the reason is that I can't change the user data using the usermod because domain users are not in /etc/passwd.
View 5 Replies View RelatedI don't know if this should be a followup to my prior topic [URL] ....
Each of the pieces I've installed all have an "Alias" directive in the conf file to link the directory where they live to be present on my server. For instance, DotClear lives in /usr/share/dotclear/web/ and there is a directive
Code: Select allAlias /dotclear /usr/share/dotclear/web
that directs http://myserver/dotclear to that site.
Now, I've set up VirtualHost entries for my DotClear and Owncloud with their own hostnames.
Code: Select all<VirtualHost *:443>
  ServerName     myowndotclear.com
  ServerAlias     www.myowndotclear.com
  DocumentRoot    /usr/share/dotclear/web
[Code] ....
Something similar for Owncloud.
The problem is when I go to [URL] ...., I get to my mythweb site.
This is not so good. So, for the sites that have their own hostnames, I removed the "Alias ..." directive. Of course, now I can't get to the hosts by going to the primary site which is probably fine, but I also still get my mythweb since that doesn't have it's own virtualhost entry.
This doesn't seem like correct behavior. Is there a better place to put the "Alias ..." directive so that it only works from one site and not all of them?
I am also thinking I should just link the directories into /var/www/html, but I'm not sure that's a better solution.
I have ubuntu server 10.4 installed on an Intel SS4200-E, which I have configured without any RAID. This machine acts as a media server to another PC. The other PC runs Windows 7 Ultimate. I have 3 1TB hard disks connected to it, and the file system on all the 3 are NTFS. I have mounted the hard disks as ntfs. I have made the folders on all the 3 hard disks shareable. I have configured Samba to make the folders on the hard disks "visible".
The ubuntu machine is in a headless configuration (it doesn't have any VGA card where can connect a monitor). I can configured SSH on it, so I can use putty from the Windows machine to logon to the ubuntu machine, but it is text based only. I am able to see all the 3 disks from the Windows machine. I am able to read/write into 2 of the disks. I am able to read, copy and delete from the 3rd disk, but not write new content to it.
Following is the snippet from /etc/fstab:
Code:
/dev/sda3 /media/Media1 ntfs-3g defaults,locale=en_US.utf8 0 0
/dev/sdb1 /media/Media2 ntfs-3g defaults,locale=en_US.utf8 0 0
/dev/sdc1 /media/Media3 ntfs-3g defaults,locale=en_US.utf8 0 0
Following are the lines which I have added to the end of /etc/samba/smb.conf:
Code:
[Media1]
path = /media/Media1
writable = yes
guest ok = yes
[code]....
In December 2009 I switched my web-hosting package with 1and1 to their best VPS package. What a difference! At this time I knew absolutely NOTHING about Linux sys admin stuff. Now, I know a little more I now run 'several' VPS instances (all with 1and1). Back to the problem then... On all my boxes I run CentOS 5.5 (Linux 2.6.18-028stab070.4) with various different versions of Plesk (9.5.2 and 10.2.0) The VPS instances themselves are on Virtuozzo nodes. As you may know, Virtuozzo has a firewall GUI allowing modification of iptables. I only use this when I make a mistake and cannot SSH. My 'original' iptables: (the VZ chains are controlled by the Virtuozzo container)
Code:
Chain INPUT (policy DROP)
target prot opt source destination
VZ_INPUT all -- anywhere anywhere
Chain FORWARD (policy DROP)
[code]....
if this iptables chain limits the number of connections to 3 per second and 100 per second respectively, is this still secure or is there no point in having this rule? If the rule is a good one to have, then how can I allow http connections to bypass this chain/rule?
For Ubuntu 10.04, I can configure the network by "Network Connections". This configuration is done by doing the following operation sequences(System->Preferences->Network Connections->wired->auto eth0). Then I can connet to and browse the internet. If I type the command "ifconfig", I can see the ip I configured for eth0. Part of the content is as blow:
Quote:
ifconfig
eth0
inet addr:192.168.28.31 Bcast:192.168.28.255 Mask:255.255.255.0
But in the "interfaces" file, there is no eth0 content. The whole content is simply as below:
Quote:
cat /etc/network/interfaces
auto lo
iface lo inet loopback
I think there should be other files that keep the eth0 configuration content.
For Ubuntu 10.04, I can configure the network by "Network Connections". This configuration is done by doing the following operation sequences(System->Preferences->Network Connections->wired->auto eth0). Then I can connect to and browse the internet. If I type the command "ifconfig", I can see the ip I configured for eth0. Part of the content is as blow:
[Code]...
I think there should be other files that keep the eth0 configuration content. What are they?
I am using find to search for .tgz files modified more than 7 days ago and delete them.find /directory/ -iname backup*.tgz -daystart -mtime +7 -exec rm -rf {} My problem is that find will go through the content of tarball as well and list all content. I want to only search main tarball and delete it if older than 7 days.
View 4 Replies View RelatedIf you have the value 100 in File1 and the value 5 in File2, how do you write a script to divide the 100 in File1 by the 5 in File2 in Linux Bash Shell?The operating system I am using is Ubuntu 10 and object is to write a script to accomplish this task.
View 5 Replies View RelatedI am planning an issue tracking system that I will build in Django and Python and host on a Debian server. Being an issue tracking system it will have to send and receive emails. I can easily configure the send mail functionality using python inbuilt functions. But is there a way to create new content from an incoming email?
e.g. scenario > User sends email to support@university.edu and the issue management system picks up that email (somehow) and creates a new issue based on contents of the email (preferably in real time but some delay is acceptable).
I have looked at postfix and sendmail but neither allows you create new content (issue) from an incoming email. Any thoughts?