I have an old scanner script that uses pamthreshold to create a small greyscale image of a text document. This program does not seem to be available in debian. Can anyone tell me how I can install it, or if there are any better alternatives available?
View 1 Replies
When I right click on a free area of the desktop or within an open folder, I read "Create Document" -> "no templates installed" and "Empty File". How to install the templates in there so I could open a file of my choice?
View 3 Replies View RelatedI have been following the Xen Beginners Guide here: [URL] .....
Everything was going smoothly until I got to the 'Configuring xen-tools and building our guest' section (two thirds down the page).
I installed xen-tools and then typed the following in a terminal window (as root):
xen-create-image --hostname=development-pv-guest --memory=2048mb --vcpus=2 --lvm=develop --dhcp --pygrub --dist=jessie
I admit PV is new to me, compared to simple HVM, so I have a number of questions:
1. Why the command not found error?
2. Should I be booting from the Xen option or regular boot option at the start up screen when creating the xen image? I've tried both and get the same error message.
3. I have Debian 8 (Jessie) installed on my system and I wasn't sure whether I should therefore make this the guest OS in my Xen PV. In asking this question I'm thinking in terms of HVMs - but I assume my Xen PV needs a guest OS of some kind? Or is my host Debian 8 already acting as a guest OS in Xen PV? I'm confused
4. If I do need to install a guest OS, is it better to go for an earlier version of debian - so as not to be so resource hungry?
I'm nervous about screwing up my host debian installation, so when I got the error message, did some research but found nothing meaningful. I don't want to end up having to reinstall my Debian 8 (base OS) ... again!
I would like to create a command in the vim that saves a text document and also compile it. Is it possible?
View 4 Replies View RelatedI have a Canon iR3570/iR4570 PXL, and installed the driver CQue 1.0 TCP/IP Queue from Canon webpage.
The problem:
- if i try to print an OpenOffice or LibreOffice Calc with an image and text, the image is not printed (the space is blank).
- if i try to print an OpenOffice or LibreOffice Calc with just an image, it's printed great.
- if i try to print an OpenOffice or LibreOffice Impress, the images are not printed but the text is printed great.
[Code]..
I am running Debian Lenny with Gnome and Metacity, and I've just installed the fglrx driver for my ATI card. I am running at a humble 1024x768 resolution, but I can barely read the text in many applications and on the desktop itself. Some programs are better than others, but for example, Icedove/Tbird's text is extremely small.
I encountered this thread: http://www.linuxquestions.org/questi...aviour-569624/ but wasn't sure if it was up to date or not.
I'm sure this topic has been covered plenty of times, but I'm new to setting up X/Window Manager/Desktop on Debian, and am not sure how to proceed. I've been using Linux for a couple of years but am relatively new to Debian (I started on Ubuntu - hence the being stumped by something like this).
The "System Settings/Startup Programs" window is large enough but the "Program" column is too narrow and it cannot be resized. The window can be dragged to make it larger but not the individual columns. It looks like a Java listbox with "Enabled = false" set. This occurs in Debian8 64 bit and also in Mint 17 and Mint LMDE2. I am surprised nobody else has raised the issue. I have a basic setup with 22" screen and 1680 x 1050 resolution. It occurs with Nouveau and NVidia drivers. It is not a critical bug so I have coped with it for 2 years but it would be nice to see it fixed. Unfortunately I could not upload a screen shot as "board attachment quota has been reached".
View 2 Replies View RelatedI'm trying to set up a small web server with php and sqlite support. I installed lighttpd, php5, php-sqlite3 and php5-sqlite3. Then, I enabled sqlite and pdo extensions in php.ini:
extension=pdo.so
extension=sqlite.so
extension=pdo_sqlite.so
However, when I try to open a SQLite3 database from php:
$database = new SQLiteDatabase($myDB, 666, $error);
I get the following exception:
SQLiteDatabase::__construct() [sqlitedatabase.--construct]: file is encrypted or is not a database
Some readings in the net make me think that my php settings are not compatible with SQLite3 databases. Is anyone successfully working with SQLite3 databases from PHP5 under Debian? Have you any recommendations? Should I rebuild php maybe?
WTF why is it with every update the devs try to break something. Might as well be using Ubuntu at this point and No I do not want to install Stable. Todays updqate would bring in linux-image-2.6.39-1-686-pae linux-image-686-pae, but my CPU Single core Intel Pentium M (-UP-) cache 1024 KB flags (sse sse2) bmips 1196.07 clocked at 600.00 MHz doesn't use PAE so it told me to remove linux-image-686 and to install linux-image-486. So more shiny crap that doesn't support older hardware, it is getting to be as bad as Microsoft.
Why don't I just go upgrade or buy new hardware with every new shiny crap that wants to upgrade. If it isn't broken do NOT fsck with it.
[Code]...
i have a HP MSA 2312fc SAN with 2 LUNs configured. The first LUN (LUN ID 1) is correctly connected to the system, but when i connect the second LUN (LUN ID 30), i find in the syslog this message: multipathd: 8:64: size 6835937472, expected 5267578112. Discard
Here is the multipath.conf
[Code]....
So I correctly see the two luns, but multipath doesn't create the relative devices. Under /dev/mapper I see: control mpath0 mpath0-part1 mpath0-part1 is the first lun, the one I mounted in a directory under filesystem. I can't find the device for the second lun
Debian 504 64-bit
How to create ISO image from .bin and .cue files?
Is it possible to create a backup iso image of protected DVD using dd command?
View 6 Replies View RelatedI'm creating a squeeze image, it should be installed on about 20 workstations, the same PC's, but different monitors. create /etc/X11/xorg.conf, or is it better to prepare without?
View 2 Replies View RelatedI want to print a document with a tux image in its background. I mean that the image of tux will be on the background & the article will be written over it,how can I do that?
View 2 Replies View RelatedJust installed gscan2pdf 0.9.20 on Ubuntu 10.04. It is hooked up to a Brother MFC 240c scanner. Scans fine with xsane. It also scans fine with gscan2pdf. I started with a document I printed to my laser printer - B&W at 300 dpi. GOCR produced very poor results. I switched to Tesseract and the OCR was 100% Then I tried to scan the document I was actually interested in converting to a searchable PDF. NOTHING! The only differences I see between the two documents are as follows:
- document 2 has an image (State seal) at the top
- document 2 has various sizes of type
- document 2 has a signature in ink
I would have expected the program to at least OCR some of the document. It should have been able to find SOME text. I have tried increasing the resolution of the scan to 400 then 600 dpi. No help. Set it to 1200 dpi - still waiting for the OCR to run.
I configure my system in a long time and now I have a suitable system! But I install all directories in one partition and now I like install again, but I need make an image of my configuration for install from it and after install I don't spend time for again configuration.
View 2 Replies View RelatedI have a Knoppix DVD-ROM. I also have its image as k.iso at the second partition of HDD of my laptop. I use the DVD-ROM and write at the boot prompt the cheat code:
knoppix bootfrom=/dev/sda5/k.iso
I also have a folder Knoppix made during bootprompt by using the cheatcode knoppix tohd=/dev/sda5 and I can use the following cheatcode while booting from the DVD-ROM, like knoppix fromhd=/dev/sda5My laptop runs Debian Lenny 5.0.4, installed in the first partition of my HDD.
Can Grub be configured to boot from the Knoppix k.iso image, or the knoppix folder, which I use to use the Knoppix OS, so that I am freed from using the DVD, when I want to use the knoppix system?
I would like to put an image in the background of my console (tty) like done by Gentoo or Suse : I found several tracks to follow, but I would like to have your advice on the best way to do that for Debian.
View 3 Replies View RelatedWhen I try to open text file with mouse pad or kate write all I see is PK and in small letters HF over TF_. I have no idea how this happened. How do I get my text document back? Using XFCE4.6.1, mousepad and kate write for my journal. Properties says its a zip archive but I didn't do that. Anyway tried to unzip it and got:
Code:
PowerJustice may be a plain executable, not an archive
unzip: cannot find zipfile directory in one of PowerJustice or
PowerJustice.zip, and cannot find PowerJustice.ZIP, period.
How can i get a RAID virtual image disk?
What i need is to mount several directories from any other partiton (or file system) as a new merge file system that can grow or decrease depending on the free space. As if it was a dinamic RAID,so i can work with huge files distributed over the partitions mounted.
Ejemp: /mnt/sda1/dir_raid1 + /home/dir_raid2 + /mnt/sda3/dir_raid3 ---> /mnt/RAID/
mhddfs and unionfs <---- are not the solution im searching (cant use huge files)
I have a Debian Jessie 32 bits machine with standard partitions : one EFI, one for the root system and a swap.
I did a dd image backup of it hard drive thinking i would be easy to restore it or clone to another device... but it seems it is not that simple ! My PC won't boot : no bootable drive found !
I did the same once with a 64 bit Debian Jessie which i fixed using an ubuntu live CD with boot-repair, but here with the 32 bits version it doesn't work : it keeps saying i have an EFI incompatible partition and i should use a 64 bits linux...
Note : i boot-repair from a 64 bits ubuntu live cd. Should i use a 32 bits version ? Because i can"t make a 32 bits Debian live CD to boot, usb key won't show up in boot options (32 bits install CD works fine)
I ha read some things and tried some others but nothing works
Grub and EFI are really obscure for me...
How could i fix my debian 32 boot ?
Or how can i properly clone my debian 32 on other PC ? am i missing something using dd ? should i use another tool ?
I've a problem running jessie on a XEN supervisor; my running kernel and the installed kernel image differ, because the host system forces the kernel at boot time. Current loaded kernel is
Code:
Select all$ uname -r
3.18.12
But I'm not able to install this version from the standard repository.
Code:
Select all# apt-cache search linux-image
linux-headers-3.16.0-4-amd64 - Header-Dateien für Linux 3.16.0-4-amd64
linux-image-3.16.0-4-amd64 - Linux 3.16 für 64-Bit-PCs
linux-image-3.16.0-4-amd64-dbg - Debugging symbols for Linux 3.16.0-4-amd64
linux-image-amd64 - Linux for 64-bit PCs (meta-package)
linux-image-amd64-dbg - Debugging symbols for Linux amd64 configuration (meta-package)
nvidia-kernel-3.16.0-4-amd64 - NVIDIA binary kernel module for Linux 3.16.0-4-amd64
linux-image-2.6.32-5-xen-amd64 - Linux 2.6.32 for 64-bit PCs, Xen dom0 support
Now I'm facing issues loading kernel modules for iptables, because the module path does not exist. Is there an easy way to install a proper kernel image from the standard repositories?
Just fooling around with a live image, thinking about dumping Ubuntu for a straight Debian install and I can't get wireless running on it. Is this a "known issue?"
View 11 Replies View RelatedI decided to finally change the grub 1.98 splash image today and found a few tutorials on how to do so. They all pretty much said the same thing. Resize an image to 640 x 480, save it as a .tga, stick it in /boot/grub/images/desktop-base. I did so and opened /etc/grub.d/05_debian_theme and changed WALLPAPER="/usr/share/images/desktop-base/moreblue-orbit-grub.{png,tga}" to WALLPAPER="/usr/share/images/desktop-base/56871.{png,tga}". After that I ran update-grub. When it told me the image it found, it said it found desktop-grub. I don't know what I did wrong but it's not finding my image. Like an idiot I forgot to back up the original file but the only thing I changed was that WALLPAPER line, like I said. I had copied that version of the file and pasted it in another document before messing around with different parts of the file to see if I could get it to work. Everything ended in failure so I copied the back up in the other document and simply pasted it over the one I had been tinkering with. However, when I try to update grub I get a syntax error which I didn't before with the exact file I have now. The error reads:
/etc/grub.d/05_debian_theme: 65: Syntax error: end of file unexpected (expecting "}")
Here's my grub file.
#!/bin/sh -e
. /usr/lib/grub/grub-mkconfig_lib
# this allows desktop-base to override our settings
f=/usr/share/desktop-base/grub_background.sh
[Code]....
I'm completely lost at this point, both on how to actually change the splash image and why I'm getting a syntax error.
I get plymouth and install it success, but it only support nouveau(nvidia) mode.
When I update my driver with [URL] , plymouth gone.
Is there any other way to do boot-image with the driver from [URL] ?
I find super-image-manager(buc), but I can not install it.
Addition: What is buc ?
I have a few small still images of around 300 bytes each that I created under Windows many years ago, I'd like to:
1) change the colour of some pixels on each and
2) make them the exact same size but I do not want to learn Gimp to do this since I have no other use for it.
Could someone show me the sequences of commands in Gimp GUI that will do the job?
1. Text of the computer and Internet is very small. I merely see it. How may I increase it? I have Fedora 12 in my computer.
2. Evolutin don't work. It don't send letters and don't receive them.
I just bought a new laptop with 1920x1080 resolution. I installed Ubuntu 11.04 via "wubi" just now, however everything in ubuntu is too small to keep my eye comfortable. I searched the web and forum and tried to enlarge those, but the solution was about Ubuntu front and folder icon only (change in "appreance", and "edit->preference"). The front and icon are still small in other applications, such as Google chrome, firefox. Note: the change of front size in chrome and firefox only changes those on the page, but not page background, not the size in tab and anything else.
View 2 Replies View RelatedUsing Debian Lenny
OpenOffice 2.4
I'm trying to fill in an application form that I downloaded. It has some shaded areas where I can answer questions, but there are
a couple places where the shaded areas are missing.Have you previously applied with the C.B.E? "Readonly content cannot be changed No modifications will be accepted." Can I add a shaded area in so I can fill this in, or can I disable the read only part?
I want to be able to preform functions on the PDF such as enlarge font and copy & paste. I'm using Gnome, but will download packages and dependencies for any desktop environment.
View 3 Replies View Related
