Slackware :: BigDesktop ATI AGP WITHOUT Driver (just Kernel Mod Built In)
Jan 23, 2010
I read over the X11 acceleration in this forum but I'm not having issues with acceleration - running slackware 13 with built in ATI AGP stuff in kernel. Glxgears is putting out what I would expect for a 9600 pro (2500 FPS in the little window). I haven't needed you guys for a very long time but I just formatted Ubuntu (was getting on my nerves) and installed slack 12 on my hp netbook and 13 on my old desktop without a hitch - except this
I NEED BIG DESKTOP! I've searched, I've read, I've wondered! What's the normal setup in xorg.conf for bigdesktop WITHOUT the ATI driver (I ran the driver after building a custom kernel and the installer crashed with "Error: ./default_policy.sh does not support version" - I think I should of renamed my kernel path and setup differently or something)? Is BigDesktop ONLY supported with the driver? I know now that the driver wont work for my system - How do I enable bigdesktop with the open source driver I built in?
Is there a way to programmatically determine whether a particular driver support is built-in rather than a loadable module? I'd be grateful if somebody would share how. I have written a shell script using the RTC (real time clock). I can check whether the rtc-cmos kernel module exists and load the module accordingly as needed, but I don't know how to determine when the driver is built-in. Of course, if the driver is built-in then the module does not exist.
I seem to recall there is a method to query the kernel config file (/proc/config.gz), through which I probably could grep for the CONFIG_RTC_DRV_CMOS parameter. I also can check whether /proc/driver/rtc exists. If that file exists then either the driver is built-in or the module was loaded.I realize the rtc-cmos driver is built-in with the standard Debian kernel build, but I still would like a way to query where the driver is supported.Is there a straightforward or direct method to query the kernel whether a particular driver is built-in?
I've posted here before (viewtopic.php?f=5&t=66322) about problems arising from my attempts to get an nVidia driver to work with my custom kernel. Now those problems are all fixed, and I'm back to where I was: the built kernel boots fine, but the nVidia driver fails.
The custom kernel is as near to the stock one as I can make it, I'm just trying to find a working build process at present, before trying to build a later-version kernel.
I used sgfxi with "-! 40" to build the nVidia driver for my custom kernel; it reported that everything was fine.
With stock kernel - 2.6.32-5-amd64 ...
Extracts from /var/log/Xorg.0.log: X.Org X Server 1.7.7 Release Date: 2010-05-04 X Protocol Version 11, Revision 0 code....
I have a custom built 2.6.37 kernel where I have most of my devices compiled into the kernel. The only modules are related to nouveau (in case I want to go back to proprietary nvidia) and sound drivers. Everything seems to be running fine. However, in /proc/acpi, I'm missing a number of entries, such as thermal_zone/, dsdt, etc. I do have ac_adapter/, battery/, button/, event, processor/ and wakeup. I've gone through what I think is a very detailed review of my kernel config, and I can't find where I've missed something ACPI related. Here is my kernel config with the ACPI section.
Code: # Power management and ACPI options CONFIG_ARCH_HIBERNATION_HEADER=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP_SMP=y CONFIG_PM_SLEEP=y CONFIG_SUSPEND_NVS=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_HIBERNATION=y .....
I'm trying to bring my Slackware system back to life as my XP HDD is dying... I've got everything working except for my audio. I got a new motherboard (ASRock P43DE3) and it has a VIA VT1708S as the onboard audio. Is there any way I can get this working without rebuilding the kernel?
I am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory patch /usr/src/linux directory copy kernel config from /boot directory make menguconfig and load config the make all make modules install i have also tried make install as well then i mopy system.map the kernel file and config file into /boot directory edit lilo reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message Code: Error: kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel. they are versioned as "" instead of "2.6.33.4-smp". you might need to adjust your symlinks: - /usr/include - /usr/src/linux ERROR: I don't have make module Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
I have Slackware 13.0 installed with the newest stable kernel (2.6.32.3) on an hp notebook with ati hd3200 igp. What happens is that when I try to buildpkg the catalyst drivers, it fails on the new kernel but not on the original one. I've been searching for a solution for a few days now. found a few that involved patching some files, but none seem to work or I can't make them work. I could probably use the binary installer but I would prefer not to.
Here's the output: Code: sh ./ati-driver-installer-9-11-x86.x86_64.run --buildpkg Slackware/Only_Module Created directory fglrx-install.hokais Verifying archive integrity... All good. Uncompressing ATI Proprietary Linux Driver-8.672...... ATI Technologies Linux Driver Installer/Packager Generating package: Slackware/Only_Module .....
I'm running Slack64 13.1 and I'm in good shape with the 33.4 kernel, but if I upgrade the kernel to 35.x what do I need to do to get it working with my Nvidia 7300GT? I have the nvidia installer, NVIDIA-Linux-x86_64-260.19.12.run. Do I just do from the stable repo
Code: slackpkg upgrade then boot to run level 3 and run NVIDIA-Linux-x86_64-260.19.12.run? Thanks for your help.
Im having a battle for quite some time now with lastest intel driver now and wondering if someone has solution. Ive checked :[URL].. and i decided to have exact same version of everything listed in there installed on the system.
I have few questions since i manually builded xorg-server 1.8 im wondering what packages are dependent for x11 to be upgraded so everything run smoothly for xserver 1.8. are those xf86-input* and xf86-video* the only one or there are other packages that i have to get rebuilded? the second question: im wondering if im the only one for that having a problem of that lastest driver dosent work for me, for the purpose i rebuilded the driver and libdrm 2.4.20 with kms enabled once i installed xorg-xserver 1.8.0
heres log problem: Code: 214.704] (II) LoadModule: "intel" [ 214.704] (II) Loading /usr/lib/xorg/modules/intel_drv.so [ 214.704] dlopen: /usr/lib/xorg/modules/intel_drv.so: undefined symbol: resVgaShared [ 214.706] (EE) Failed to load /usr/lib/xorg/modules/intel_drv.so [ 214.707] (II) UnloadModule: "intel"
I can't seem to get a screen on my Asus Netbook 1005pe. I did install the xf86-video-intel-2.10.0-i486-1.txz & kubdrn-2.4.17-i486-1.txz.I'm also having a Kernel Modesetting issue. Below is my Xorg.conf file & my Xorg.0.log file. Sorry if I am not explaining myself correctly.
I'm using Slackware 13.1 32bit and can't run virtualbox when I try to boot the virtual machine it shows me a window with the following message:
Quote:
Kernel driver not installed (rc=-1908)
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing
'/etc/init.d/vboxdrv setup' run - /etc/rc.d/rc.vboxdrv setup
Quote:
Stopping VirtualBox kernel module ...done. Recompiling VirtualBox kernel module ...failed! (Look at /var/log/vbox-install.log to find out what went wrong) Check /var/log/vbox-install.log
Quote:
make KBUILD_VERBOSE=1 -C /lib/modules/2.6.33.4-smp/build SUBDIRS=/tmp/vbox.0 SRCROOT=/tmp/vbox.0 modules test -e include/generated/autoconf.h -a -e include/config/auto.conf || ( echo;
I have made a full install of Slack 13.37.0. When I try to run the installer of the NVIDIA GF 8400GS card (NVIDIA-Linux-x86-180.29-pkg1.run) downloaded from [URL], I receive an error message. It says that the kernel source cannot be indetified/found. /lib/modules/2.6.37.6-smp/source and .../build links to /usr/src/linux-2.6.37.6-smp, which contains the full kernel source (can be compiled), including the header .h files in include/linux. The same NVIDIA installer can be run successfully on my previous Slack 11.
I'm using Slackware 13.0 on rather old PC with old Riva TNT2 video card. Default driver is "nv". Everything work fine, but without hardware 2D acceleration under X.
After studying various manuals I 1. downloaded Nvidia binary package suitable for my video card. 2. Recompile kernel without Riva framebuffer support. 3. Start Nvidia script.
Script said: "Error: unable to find the kernel source tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured...""
Kernel sources are in /usr/src/linux-2.6.29.6 I have all kernel packages installed. I was trying various switches for script in order to show the right path - nothing! 8 Some people say that Nvidia script don't like 4th digit in a kernel's name and get it from "uname -r" output. Can I change it somehow?
I installed Ubuntu today, and to my great pleasure i found that my Wacom Intuos 3 tablet worked as perfectly as when the windows driver is freshly installed. Unfortunately, i installed no driver, and therefore can find no way to configure my tablet.
What i need configured is the tablet proportion (i have two screens, so the mouse moves too fast in the X direction compared to the Y direction) and what the pen buttons do in different programs. The wrong button is currently right click.
I got last night debian 5 stable, but it has an older version of kernel, I think 2.6.26, which doesn't have my network card drivers. I tried to install myself the kernel, but I a newbie in linux, so something failed and I give up until next time. Is this version: [URL] a safer one for a desktop computer, daily usage? How to I know it has the latest kernel?
I am planning on buying a DELL Monitor for my desktop. Now, I would like to have one which has an in-built camera. Also, my operating system is going to be Linux. Will I have any driver related issues for monitor as well as for the in-built camera.
Since there aren't many available third party packages for slackware 13.1 yet, is it safe to install packages built for slackware 13.0? For example I need to install openoffice and skype and the latest packages i could find are built for 13.0.
Squeeze-beta was my first foray into Debian, and I love it. I changed my setup to a rolling setup with testing (Wheezy), and have done that for several months. Lately, I got a new kernel, but it reboots to a terminal rather than GUI (I'm a simple laptop user). I think it's because of the NVIDIA drivers, and here is what I've tried (meanwhile, I'm using the previous kernel):
# apt-get install module-assistant nvidia-kernel-common # m-a auto-install nvidia-kernel${VERSION}-source A blue screen appears that says:
module-assistant error message Bad luck, the kernel headers for the target kernel version could not be found and you did not specify other valid kernel headers to use.
You can try:
module-assistant prepare or apt-get install linux-headers-2.6.38-2-amd64
I have done both, rebooted, and I still get the blue screen. I also see this message:
nvidia-kernel-source was not built successfully, see:
/var/cache/modass/nvidia-kernel-source*buildlog*
...and I have copy/pasted the file below (which omits lines 101-200 because this message is too long then):
I'd like to stream from my netflix account on Slackware64, v13.1. What I've found is I should probably use "Moonlight" as it's a MS Silverlight clone for linux. Has anyone had this running before? Are there any pre-built packages or a slackbuild script somewhere?
Does anyone notice that Slackware's user/groups is cluttered with things no one will ever need, do you need be to be part of the slocate group? like really? Why doesn't every program just have its own group then, I look at my distro (LFS built), SuSE and some others and I can't help but notice the huge amount of groups in slackware, if you going to add groups for everything then why in the universe do we even need sudo for? Just make the binary you want to work a group and change its ownership..... wtf is Pat and the rest of Slackware doing?
I built my slackware system from source code. Bootstrapped, toolchained etc.. The only thing I didn't change was the chost thinking that life would be easier if left alone @ i486. Would I have gained anything if I had used i786 or even pentium4 (pentium4-slackware-linux-gnu)?
I already got all the benefits of optimization when I used (still using) my own CFLAGS CXXFLAGS right? So changing the chost won't do anything speed wise will it? If I used march=prescott when compiling everything am I ok to just forget about the chost value? It's not gonna change anything will it?
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
I'm attempting to install the driver for my atheros AR8131 PCI-E Gigabit Ethernet adapter (in my Lenovo laptop) on my newly installed RHEL5 system (it's not currently being recognized).
I tried using: 'make install' but hit an error "Makefile:61: *** Linux kernel source not found."
After this, I tried: 'sudo yum install kernel-devel kernel-headers'
To rectify this, but hit this error "No package kernel-devel available" (and the same for the headers). What should I do?
I write the network driver. Transmission of packets in user space I do through netlink socket`s. In user space there is a handling of packets and their transmission on other device (however, it isn't important).
Problem in that any time, packets through the driver in system, and is reverse, are transferred normally. But then there comes the moment when the kernel crash. If to look in syslog it seems to me that comes deadlock. Also I think that it is related with netlink socket`s.
I can't find the information on that anywhere how correctly to use netlink socket`s in kernel space. Can at you will any a reason into the account of synchronization of sockets and the driver in kernel space?
With the recent upgrade kernel, my ATI driver can no longer work. After upgrading to the new kernel, upon reboot I would get stuck at the "checking battery status" and can't boot into kubuntu.
I'm running Kubuntu 10.10 64 on intel i5 with radeon hd 4870.
So I thought I messed something up since I was fooling around with conky script the day before. I did a clean install of kubuntu 10.10 64 and reset all my settings and my files. At this point, everything works smoothly and I can reboot multiple times without a problem.
I proceeded to install the Radeon catalyst driver following the documentation, which worked perfectly for me on the previous kernel. After rebooting, I can no longer get pass the "checking battery state" black screen. I had to boot into safe book, uninstall all fglrx and also delete xorg.conf to be able to boot back in normally.
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
