My Debian Jessie system started to bug after a separate /usr partition being full. After redimensioning and various packages reinstalls I fall on this:
systemctl --user status Failed to get D-Bus connection: Erreur inconnue -1
After upgrading to Debian 8, I'm having a bit of trouble with systemd, since I'm not used to it (seeing as it was all init when I started). I tried to use a tutorial to create a new service and one step in it was to run
Code: Select allsystemctl enable xxx.service
Unfortunately, every time I run systemctl - even without parameters - I get this error:
Code: Select allFailed to get D-Bus connection: Operation not permitted
I have some errors when run the mount -all command: mount: wrong fs type, bad option, bad superblock on /dev/sdc5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so Failed to open /proc/filesystems: No such file or directory
[Code]..
1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
The situation: The office has a WiFi network on one DSL line, which is used for our VoIP call center, and a wired network for our internal network and the majority of web surfing/traffic . Part of the office must be temperature controlled/monitored - we have a rather nice digital thermometer which is WiFi enabled.I have a Debian Wheezy box with a WiFi card and ethernet connection
What I'm trying to accomplish:Connect wifi enabled thermometer to WiFi network so it can automatically send temp updates (currently I have to do it manually via USB)Have the Wheezy box accept the downloaded file then send it to a back up server in the wired network
Side things that may be useful : Prefer to use wired connection for internet and apt and suchWiFi connection will really just be used for connecting to the thermometer
This [URL] .... topic got me thinking that there might be a way to bring the two networks together, but I don't know if that will wreak havoc on things. I know, the Windows and Mac OS don't like having ethernet and wifi at the same time, might Linux be better for this?
v&n had this to offer in the prior thread [URL] .... which I'll be doing more research on.
Does anyone here have experience with using the Debian Live Builder from HERE? Every time I attempt a build, it fails. I thought it strange that it didn't let me select 'amd64' under 'LB_ARCHITECTURE', 'testing' under 'LB_DISTRIBUTION', or multiple options under 'LB_LINUX_FLAVOURS'. Does anyone see what I might have done wrong?
# Standard options
LB_BINARY_IMAGES="iso-hybrid"
LB_DISTRIBUTION="sid"
LB_PACKAGES_LISTS="minimal"
LB_TASKS=""
LB_PACKAGES="dpkg aptitude wget wvdial ppp sudo"
[Code]...
I recently Installed debian 8.2 on my toshiba satellite l505-es5034. Using cinnamon desktop.
Did googling regarding how to get my insignia usb bluetooth dongle functioning and ended up installing blueman.
It can search for devices but when i try to connect to my logitech bluetooth adapter for my stereo it reads "Connection Failed: No such file or directory"
saw on arch linux wiki that this may happen if the user isnt in the lp group so I added the user to the group and still the same result.
I tried connecting to my phone with same result. No issue pairing, connection failed.
I'm new user from debian. I had try debian squeeze testing. Everything after I got installation was going well but, I got little problem with my phpmyadmin. Icannot login into phpmyadmin.
It said:
#1045 Cannot log in to the MySQL server
Connection for controluser as defined in your configuration failed.
I try a lot of tutorial from google and not work..
I'm working on getting a Debian box up and running for training labs for Cisco, and would like VNC access to this Debian box. My main laptop is a MacBook Pro, and I have a Windows 10 desktop.What the problem is: Using the MBP's built-in VNC viewer, I receive a "Connection failed to "Server" Make sure Screen Sharing or Remote Management is enabled on the remote computer. using Chicken (of the VNC), I receive a "The server refused the connection".I'm using tightVNC as a server on the debian box. This is a fresh install of Debian.URL...
View 8 Replies View RelatedI was compiled a new kernel version 4.4 of debain 8.2 amd64, i've issue > tsc: Fast TSC calibration failed, and I'm stay on busybox. Fortunately, I've backup and i can to boot on 4.3 version, it's a choise on startup OS !
I thinking that i compile a new kernel with 4.3 version, i do it, and now have got a same issue (tsc: Fast TSC calibration failed) !
I think that there are adding a new modules while compilation of 4.4 version. I've saw to google if this issue are listing, the answer is yes ! but now i have only 3.6 version for booting ...
Suspend worked before I completely reinstalled Testing from scratch. Now it seems to suspend OK, but when it tries to wake up it fails. Details here: [URL]
View 6 Replies View RelatedI want to connect to my Linux debian server, via Remote desktop connection, but when I give IP of my server and click connect, it fail, it says can't connect to the remote computer and below 3 reason.
View 3 Replies View RelatedNew install of Mint LMDE (Debian Testing)
I installed Blueman & paired my headset successfully but I get this error message when I connect my headset, "Failed to initialize pulseaudio bluetooth module. Bluetooth audio over pulseaudio will not work". When I go to Pulse Audio Volume Control, it's not showing in my hardware list.
I run a mailserver and this is bothering me quite abit. Being going on for about a month now. Running exim4 and dovecot with exim4u. This message was created automatically by mail delivery software. A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
dsghjytyt@yahoo.com
retry time not reached for any host after a long failure period
This is a copy of the message, including all the headers.
Return-path: <andreas@servar.net>
Received: from ip-81-210-201-120.unitymediagroup.de ([81.210.201.120] helo=holly5)
by gwdebian.net with esmtpa (Exim 4.72)
(envelope-from <andreas@servar.net>)
id 1QWpUO-0000yy-ML
for dsghjytyt@yahoo.com; Wed, 15 Jun 2011 14:46:32 +0200
MIME-Version: 1.0
Date: Wed, 15 Jun 2011 14:44:16 +0200
X-Priority: 3 (Normal)
Content-Type: text/plain;
charset="iso-8859-1"
Subject: =?iso-8859-1?Q?lizzie_VIAGRA_=C2=AE_-61%_discount?=
Content-Transfer-Encoding: quoted-printable
From: andreas@servar.net
Reply-To: "RE: Your Recent Job" <Posting>
To: dsghjytyt@yahoo.com
X-Mailer: Microsoft Outlook Express 6.00.2900.2180
Message-ID: <CHILKAT-MID-3b7cf1d5-b3e7-3d78-5c1d-713c0e381cb9@holly5>
X-Antivirus: avast! (VPS 110615-0, 15.06.2011), Outbound message
X-Antivirus-Status: Clean
X-Scanned-By: unscanned primary on gwdebian.net (109.108.198.243); Wed, 15 Jun 2011 14:46:32 +0200
Then alot of random text
I run OSX on my everyday computer so this is not me sending out stuff since the above mail says Microsoft Outlook express has sent it (?) Running a Debian Squeeze server. And I really dont get any other spam due to exim4u setup and spamassasin.
upon boot I see Starting Clustered TB : ctdb failed! Starting system message bus: dbus Could not connect to database Starting MTA: exim4 startpar: service(s) returned failure: ctdb ... failed!
View 1 Replies View RelatedI ran my daily update of Debian Stretch using Synaptic, and when done had an un-installed update for ifupdown remaining marked in the list. By right clicking I was able to get Synaptic to say it would install the update, along with quite a few other updates. In the process of doing this, my screen went dark and stayed dark. On reboot, I get the Grub menu to select which Linux system I want to boot, but whichever one I choose, including older ones, I get to a command line, not the Gnome GUI.
I tried to complete the update of ifupdown using apt-get, only to discover that my machine no longer has any network connection, let alone Internet.
How do I begin to troubleshoot this?
I recently installed two PC with debian lenny (kernel 2.6.26). One is called serveur-debian1 and the second one serveur-debian2. I have installed gnome,samba, mysql5, apache2, php5, and Virtualbox,bridge-tools on them. On serveur-debian2, i installed an other virtual debian lenny with apache2,mysql5,php5,nagios and centreon on it to view my network. I remember having installed a soft to access nntp on serveur-debian2 in order to test nagios.
Since a few days, i have problem to access to my servers. rom my windows 7 client, i try to ping serveur-debian1. Response is OK but not for all resquets Always from the same computer, i try to ping serveur-debian2. Response is OK but not for all again.
When i launch a ping on serveur-debian1 and serveur debian2 at the same time i have:
ping 1 to 10: serveur-debian1: response OK
serveur-debian2: no response
ping 11to 14: serveur-debian1: no response
serveur-debian2: response OK
ping 15 to 25: serveur-debian1: respone OK
serveur-debian2: @ip serveur-debian1 network unreachable (there's no error, it shows me the ip of serveur-debian1)
If i switch on the debian virtual server on the serveur-debian2, and i ping it at the same time, the response is OK for all resquests. The problem is very strange. I can't have a correct connection and when i launch a request from a software which access the mysql server, the requests failed ...
I`m unable to mount my second hard drive I use to store my music and pics and wonder if it is to do with the error "failed to initialise HAL!" which I get every time I start Debian Lenny (AMD64 architecture). I have had this since doing an install (fresh) a few hours ago.
The drive is an ntfs one but when I click its icon in the computer section it says it cannot mount it and gparted says it cannot read the file system.If so how would I get the error box to stop appearing and how do I mount the ntfs drive?
OS:Debian Linux 2.6.32-5-amd64 Should i need to worry about these error messages? If 'Yes', how to check and fix? When it boot,
/var/log/syslog
Mar 2 23:29:03 ipb167 kernel: [ 1.465629] PM: Error -22 checking image file
Mar 2 23:29:03 ipb167 kernel: [ 4.110123] amd64_edac: probe of 0000:00:18.2 failed
[code]....
I'm using Squeeze amd64, installed latest kernel 2.6.38 from backport yesterday. Just now try to check for any update but failed, these messages show.
View 2 Replies View RelatedI installed linux-image-4.1.0-trunk, when I boot into the kernel there's no wireless available. Dmesg indicates seems like the firmware is loaded, although firmware-iwlwifi is installed:
...
[ 11.047031] iwlwifi 0000:04:00.0: firmware: failed to load iwlwifi-7265D-13.ucode (-2)
[ 11.047039] iwlwifi 0000:04:00.0: Direct firmware load for iwlwifi-7265D-13.ucode failed with error -2
Built a machine w/ i5-4440 & gtx 960. I installed xserver-xorg-video-intel & xserver-xorg-video-nouveau. Xorg -configure fails, so I added xorg.conf I found online, makes no difference. xrandr can't open display. startx of course fails.
Backstory: My plan was to dual boot sid + stable as fallback with shared partition. First installed stable and whether connected to mobo or gfx card, I couldn't get login on tty, it would just hang on errors. So I installed sid (this time using lvm to hopefully make partitioning easier) and while I get the "failed to load nouveau" errors on mobo, gfx card gives me a login screen.
uname -a
Code: Select allLinux 4.1.0-2-amd64 #1 SMP Debian 4.1.6-1 (2015-08-23) x86_64 GNU/Linux
lspci | grep VGA
Code: Select all00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
01:00.0 VGA compatible controller: NVIDIA Corporation GM206 [GeForce GTX 960] (rev a1)
[Code] .....
I'm getting BSOD when I'm booting my main system (debian 8 fully updated). I get a BSOD with a _ sign. URL...because I can't access to failed boots files. Besides having the files
Code: Select allfelipe@debian ~ % ls /var/log/journal Â
362d07f9e18b45f8aec4575c347f181d 92e8a448f7a348719da129184a7e6821
Code: Select allfelipe@debian ~ % journalctl --list-boots
 0 0c51ae5b67f144059c5470dbe345d621 vie 2016-03-25 09:05:29 ART—vie 2016-03-25 09:11:58 ART
HP ProLiant ML110
Intel(R) Pentium(R) 4 CPU 3.00GHz
External USRobotics V.90 56K FaxModem
Plugged into first serial port
dmesg | grep 'erial'
[ 2.160168] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[Code]...
I am struggling to find out how to start the connection to my VPN on boot?
View 1 Replies View RelatedMy network configuration is in a weird situation, that I always need to run dhclient manually each time after a network connection is established. When my computer connects to a router, sometimes it won't get a valid IP, and it uses an automatically generated fake Internet IP. In this situation, it won't connect to the Internet at all. Sometimes it get a valid local network IP, but still cannot connect to WAN, and could only connect to my router's address (both through ping and through router's management webpage). In both situation, it can be solved by a simple dhclient run.
This is my /etc/network/interfaces file:
Code: Select all# This file describes the network interfaces available on your system
# and how to activate them. For more information, see interfaces(5).
# The loopback network interface
auto lo
iface lo inet loopback
# The primary network interface
allow-hotplug eth0
iface eth0 inet dhcp
iface wlan0 inet dhcp
and this is my /etc/NetworkManager/NetworkManager.conf:
Code: Select all[main]
plugins=ifupdown,keyfile
dhcp=dhclient
#no-auto-default=FE:50:52:BE:46:4C,
I use Debian Jessie 8.2 and I am using a 3G connection using this modem => [URL] ....
The 3G connection works fine, except after 24 hours the connection drops and I cannot reconnect. If I reboot the computer, the connection will work again.
My guess is that my ISP gives me a new IP address after 24 hours and somehow my system cannot handle it.
How can I reconnect my 3G connection without rebooting?
I have already tried the following commands:
Code: Select allsudo service network-manager restart
Code: Select alldhclient -r eth0
dhclient eth0
Code: Select allsystemctl restart ModemManager
Results of journalctl and grepping my connection name (SFR)
Code: Select allsept. 22 17:58:19 ark1 NetworkManager[512]: <info> Policy set 'SFR Web / Prepaid 1' (eth0) as default for IPv4 routing and DNS.
sept. 23 18:17:07 ark1 NetworkManager[9446]: <info> new connection /etc/NetworkManager/system-connections/SFR Web * Prepaid 1
sept. 23 18:17:08 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR Web / Prepaid 1'.
[Code] ....
As you can see sept 22 at time 17:58 is when the computer started up. And roughly 24 hours after it failed to reconnect.
Also I should mention that there is a script to run the command:
Code: Select allsudo service network-manager restart
if the computer cannot ping a server, ie if the connection is lost.
More journalctl info when the system tries to reconnect:
Code: Select allsept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Auto-activating connection 'SFR'.
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) starting connection 'SFR'
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) scheduled...
sept. 23 23:52:53 ark1 NetworkManager[9446]: <info> Activation (ttyUSB0) Stage 1 of 5 (Device Prepare) started...
[Code] ....
I rebooted my vServer (Debian 8) and it doesn't came back up. Well, I used the rescue console on my server and the server seems to be running fine, except the network was broken. So I tried 'ifconfig' but nothing came up. So I tried to enable my interface with 'ifconfig venet0 up', and now it appears in my ifconfig list
Code: Select allroot@i67svof:/var/www# ifconfig
venet0Â Â Link encap:UNSPECÂ HWaddr 00-00-00-00-00-00-00-00-00-00-00-00-00-00-00-00Â
     UP BROADCAST POINTOPOINT RUNNING NOARP MTU:1500 Metric:1
     RX packets:557 errors:0 dropped:0 overruns:0 frame:0
     TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
     collisions:0 txqueuelen:0
     RX bytes:36463 (35.6 KiB) TX bytes:0 (0.0 B)
My HWaddr doesn't look that well :) 'ip addr' prints this result:
Code: Select allroot@i67svof:/var/www# ip addr
1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN
  link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: venet0: <BROADCAST,POINTOPOINT,NOARP,UP,LOWER_UP> mtu 1500 qdisc noqueue state UNKNOWN
These are the last lines in /var/log/syslog:
Code: Select allroot@i67svof:/var/www# tail /var/log/syslog
Feb 20 11:34:16 i67svof systemd[1]: Stopping memcached daemon...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Network Name Resolution...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Regular background program processing daemon...
Feb 20 11:34:16 i67svof systemd[1]: Stopping Login Prompts.
[Code] .....
And finally my network config in /etc/network/interfaces
Code: Select all# Auto generated lo interface
auto lo
iface lo inet loopback
# Auto generated venet0 interface
auto venet0
[Code] .....
I have been tol that for debugging purposes it is often useful to have a serial connection to a computer. I have some diskless workstations thats freezes during boot. I guess X has someting to do with this, but I'm not sure. Since the workstations are diskless, syslog is not stored locally so I cant se what is happening after the NiC stops working. When the worstation freezes, screen is going black, all lights on the keyboard turns on, lights on NiC is going black. It is not possible to ping the workstation.
View 1 Replies View RelatedI am getting this error when I try to bring up IPSec Tunnel.Starting connection with command /usr/sbin/ipsec auto --up 'paycode-to-vivacom' ..
104 "paycode-to-vivacom" #7: STATE_MAIN_I1: initiate
003 "paycode-to-vivacom" #7: received Vendor ID payload [draft-ietf-ipsec-nat-t-ike-02_n] method set to=106
003 "paycode-to-vivacom" #7: ignoring Vendor ID payload [FRAGMENTATION c0000000]
[code]....