i am using kubuntu and my laptop does not hibernate or even sleep whenever i close the lid of my laptop!! i have tried to configure the powersave but it is all in vain!!
When i close the lid,the screen goes blank and it deactivates everything including the mouse and the keyboard!
I am using ubuntu 9.10 and when i close the lid of the laptop it does not hibernate or suspend?
what do i do?
My Thinkpad T61 just got a Corsair X256 SSD in the ultrabay (where the CD usually is). This works well except for hibernating. Earlier I had a traditional HDD drive there which also hibernates just fine.After a failed hibernate the machine hangs with this message on screen:
ata1.00: status: { DRDY ERR }
ata1.00: error: { IDNF }
ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0
ata1.00: failed command: FLUSH CACHE EXT
[code]...
And looking in the kern.log I see this:
Aug 16 18:57:00 lap kernel: [ 175.690230] hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
Aug 16 18:57:00 lap kernel: [ 175.690237] hda: task_no_data_intr: error=0x10 { SectorIdNotFound }, LBAsect=1207959552, sector=18446744073709551615
[code]....
I've a MSI V601 laptop that won't come out from neither suspend nor hibernate and I tried almost everything so far...what shall I do?
View 1 Replies View RelatedI think it might have to do with an app I installed called Jupiter (http://sourceforge.net/projects/jupiter/) that missed with my power configs, I removed it but I still can't hibernate or suspend. Whenever I try to do either, my screen fades to black and nothing happens. If I move the mouse or touch the keyboard, it comes back.
View 5 Replies View RelatedI'm using pm-hibernate, and would like to reboot the machine after it's done hibernating, rather than having the machine turn off.Is there a way to do this with pm-hibernate, or any other Linux hibernate thing?
View 2 Replies View RelatedInstalled openSUSE into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.
Reopening the lid and will see a screensaver password screen immediately.
Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?
This also happens with Debian that this laptop is dual booted with.
i have some problems.. I set the laptop when I close the lid to hibernate and none of them really work. it doesnt "hibernate". the pc is on.. fans are on all lights are on i left it overnight and it got HOT i have to have it "shut down" when i close lid...
View 3 Replies View RelatedAfter installing Ubuntu Tweaks (that's about all I remember changing) the cursor disappears whenever I hibernate or suspend the laptop. I am running 10.04.1 and have compiz running but changing to less effects seems to have no effect on this problem. when I have no cursor the only thing I can do is restart and it reappears and does fine until I suspend or hibernate. Some hours later - I just found the setting that caused this. The tweak has a box that was clicked to disable the touchpad while typing. This caused the blank cursor when awakened. working now. This shouldn't happen, but I guess this is one to leave alone. Here we go again. cursor disappears after suspend.
View 3 Replies View RelatedMy Suspend and Hibernate buttons disappeared on my laptop.And i can't find a way to restore that I heard that i could restore them with Ubuntu tweak but i can't find how.
View 1 Replies View RelatedWhen I close the lid of my laptop and open it after some time I am greeted with a message "Failed to suspend". When I tried to manually suspend/hibernate, I saw these options are not available there at all. Of course, they did exist when I did the fresh installation but I cant see them anymore. I am totally pissed off with this.
View 1 Replies View RelatedWhen I close the lid of my laptop and open it after some time I am greeted with a message "Failed to suspend". When I tried to manually suspend/hibernate, I saw these options are not available there at all. Of course, they did exist when I did the fresh installation but I cant see them anymore.
View 9 Replies View RelatedMy AspireOne with Xubuntu 11.04 goes back to hibernate just after I hit a key to wake it up. I recorded a video of the problem, but this forum won't allow me to post the link. I guess you can PM if you want to watch the problem.
The trouble started immediately after I followed the instructions to test out Unity. I was going to post the link, but again, noobs like me can't do that.
Installed Squeeze into my Thinkpad T410 and noticed that when I closed the laptop lid, the moon icon does not light up.Reopening the lid and will see a screensaver password screen immediately.Does this means that the laptop does not have Sleep (or is it called hibernate) mode enable? How can I enable it?[Solved]Managed to found out what I've done wrongFor KDE users, go to the menu-> Power Management-> Chose the Profile as Powersave
View 1 Replies View RelatedI have a problem with Cairo-dock not auto-hiding when my laptop wake up from hibernate. Anyone know a quick fix for this? Ubuntu 10.04 Cairo-dock with OpenGL
View 2 Replies View RelatedRecently my F14 x86_64 powered laptop started to present some bad behavior: it can not longer hibernate.
In order to "exercise" the laptop's battery, sometimes I let the machine run until the power goes off, but I learned that Fedora has an elegant solution: it puts the laptop to hibernate. However recently, perhaps after I installed the Catalyst driver (which is working fine BTW), when it tries to hibernate an error message is displayed saying something about "not enough swap".
I read somewhere that in some scenarios swap memory is no longer important for system's performance, that's why I created only a 1.1GB swap partition, which does not match the RAM (3GB) and I wouldn't think it should...
What can I do here in order for the laptop to hibernate again? Is the Catalyst driver the one with a problem, or should I expand the swap space for it to match the installed RAM? A workaround perhaps?
Just got Ubuntu 9.10 and I'm liking it a lot, but my computer refuses to go into hibernate or suspend. I have a Dell M1530 but I don't really think it's a dell hardware issue because it's not just when I close the screen, it's also when I click suspend or hibernate from the menu.
View 2 Replies View RelatedOn a Debian system, there are packages called uswsusp and hibernate. The former contains a program named s2disk, the latter contains a program called hibernate. Superficially, these both do the same thing: the suspend the machine to disk. Usually, this works fine, but since I'm often using Debian testing and there are lots of changes in kernel and other packages (I assume), somethings this breaks. But then, when one of these programs doesn't work, sometimes the other works. Often, hibernate works when s2disk doesn't.annoyingly, however, the "Suspend" or "Hibernate" buttons in the graphical user interfaces (e.g., LXDE, KDE) appear to be wired up to the s2disk program, so when that breaks I have to use hibernate manually.
So, what is the difference between these packages? Interestingly, the hibernate package "recommends" uswsusp, but the package description says that it "smartly puts your computer to sleep ... using one of the various methods available in the kernel". So apparently it can fall back to something else when the s2disk method fails? And if hibernate is more powerful, why wouldn't the GUIs use it instead?
Is it possible to catch the power management events(hibarnate/standby/sleep)o the code(c++)?
View 2 Replies View Relatedwhere do I define that my laptop should go hibernate or suspend when my battery has a certain percentage? Where do I define this percentage ?I see no such options under Power Management Preferences.
View 4 Replies View RelatedI have installed Fedora 15 Alpha with GNOME 3. Everything is working fine. However, I can't see any option to hibernate or shutdown.
In the top panel when I click my user name, I only have one option and that is to suspend. Normally I like to hibernate or shutdown. And I can't see any option of what to do when I close my netbook. Normally, I prefer to hibernate.
Put 'nix box to sleep from command line?
I found that the solution was to do: pmi action hibernate
But when I typed in that, it showed: Error org.freedesktop.DBus.Error.ServiceUnknown: The name org.freedesktop.Hal was not provided by any .service files
I have fedora 13. What is the difference between suspend and resume? If I suspend, how do I turn on the pc? If I hibernate, how do I get out of hibernation?
View 3 Replies View RelatedI dual boot Ubuntu and Windows and sometimes I just want to switch between the partitions without loosing the state of the OS I was currently working with. Currently to do that I just hibernate that OS and, when the computer turns off, I restart it and select the correct partition.
I do not really want to have to press the on button again every time I want to switch between partitions. I figure that there must be a way to make the hibernate action restart instead of shutting down.
How do I make the hibernate action restart instead of shutting down on:
Windows, or Ubuntu
P.S. It is more important to me that I can do this in Ubuntu than Windows (because of the way I use the partitions) therefore if one answer says the Ubuntu way and the other says the Windows way then I will mark the Ubuntu one as the answer and give the Windows one an upvote and a big thankyou.
I have installed Ubuntu as wubi (next to windows 7). When I expect the computer to shut down (either to hibernate or as part of, you know, shutdown), it doesn't. All the programs end, I am logged out, but I still have a picture on the screen (ubuntu default picture).
View 7 Replies View RelatedWhy doesn't Hibernate work in Ubuntu 10.10?
I have tried to research the problem and suspect that the hibernation function is not a default function of the system. But how do I install it.
First of all let me introduce myself. My name is Rasheed and i am from UAE, after not having any reply from a week in Fedora's official forum i came across the linuxquestions through google and hoping to help others and resolve my issues as well with the help of experts here. So here is my problem what i am currently having. I am going through a serious issue right now. My laptop crashes when SUSPEND/HIBERNATE or unplugging the laptop's charger.
View 14 Replies View RelatedCurrently running Slackware 13.37 64-bit on a notebook and finally have suspend/hibernate after realizing that USB devices, especially USB HDDs, need to be disconnected before suspend/hibernate can work. Problem is I have 2 USB HDDs that are connected to my notebook whenever the notebook is stationary for the extra storage so I'd like to create a script that would get invoked that would stop the suspend/hibernate process if certain partitions are mounted. I know what I would like to accomplish, but I have basic scripting knowledge so I was hoping to get some assistance.
1. script would basically store a user specified string containing devices that are non-USB, ie: NONUSB="/dev/sda /dev/sdb"
2. possibly use /etc/mtab to get a list of what is currently mounted and then remove lines containing whatever is specified in $NONUSB and store those values in $USB
3. run a for loop that executes 'umount' on each token in $USB
3a. stop suspend/hibernate process if 'umount' fails at any point
3b. if 'umount' passes then suspend/hibernate
I have been using Linux Mint with great success for about 5 months. The other day when I went to turn off my computer instead of selecting shut down, I accidentally clicked on "Hibernate". Now my computer will not turn on, even after a hard shut down. Nothing comes up, not even the BIOs screen. It did this once before and my Linux-guru ex was able to fix it, but I will be dammed if I remember what he did.
View 14 Replies View RelatedI am not able to connect to Mysql using hibernate.
Is there any configuration in my.cnf or any where i used:
This configuration in my.cnf but still i am not able to connect. Can any one helps me. I am newer to mysql,
Why to use debian.cnf,mysqld_safe_syslog.cnf
