Software :: Cannot See Windows Machine On Same Network
Nov 21, 2010
I have a small network,all my machines get their IPs dynamically in 192.168.0.0 network When I ping linux machine fron win7 or win2k8, linux responds. when I try pinging any machine from linux it says "unknown host sierac".
Recently, I created a new linux machine, linux machines can not talk to each other if I dont add their respective ips in the host file, but both of them can be contacted by windows machines through ping or remote desktop.
View 9 Replies
ADVERTISEMENT
Jul 6, 2010
I had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies
View Related
Mar 11, 2010
I am starting a MCSE course and part of it is to create and configure a domain etc etc I have done this and all my windows XP and 7 machines on my LAN are now functioning as part of the domain just great.
Unfortuntely, I have several Open suse machines which are currently not part of the domain yet (they are in a basic Workgroup).
get these computers onto the domain so that a user can log on using their domain credentials and I can apply security policies and what not?
View 9 Replies
View Related
Sep 8, 2010
Can I SSH from a windows machine out of my LAN network to a Linux Server inside my home LAN network?
View 6 Replies
View Related
Aug 23, 2010
`I'm on 10.04 trying to access shares on a windows machine. The machine does not appear at all in windows network/workgroup. I can see these shares when I'm on my windows partition so I know the problem isn't with the network.
Code:
sudo aptitude install apache2.2-bin apache2.2-common libapache2-mod-dnssd
View 1 Replies
View Related
May 31, 2010
I have a external harddisk attached to my linux PC.I have a laptop having windows 7 on my network.I want to to be able to open up the folder in the external harddisk(linux partition) and check the files from my laptop. People suggest samba. But I am not able to configure correctly. Please excuse me and give me few detailed instructions.
View 4 Replies
View Related
May 15, 2010
Im trying to setup samba so that i can copy some files from my windows 7 machine over to the drive on the opensuse machine running 11.2. i believe i set everything how it should be set up but no matter what i do i cant write filesfrom the windows machine. Here is my smb.conf
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
# Date: 2009-10-27
[global]
[Code]...
View 9 Replies
View Related
Jul 9, 2011
I am trying to ping my Windows machine connected to an open network (I'm at a internet caf) from my linux VM (also connected to the same network with a usb adapter), but I'm obtaining this output:
# ping 10.23.47.12
PING 10.23.47.12 (10.23.47.12) 56(84) bytes of data.
From 10.128.128.1 icmp_seq=1 Packet filtered
From 10.128.128.1 icmp_seq=2 Packet filtered
With high probability host 10.128.128.1 is a firewall or some router with packet filtering mechanism; but I don't understand how it can be possible to implement this kind of solution, with what kind of software or hardware? I also tried a nmap scan to my Windows machine but it returns me scan results from another host(the firewall or the router I suppose):
nmap -sS -O -P0 10.23.47.12
Starting Nmap 5.51 ( http://nmap.org ) at 2011-07-09 15:46 CDT
Nmap scan report for 10.23.47.12
Host is up (0.097s latency).
All 1000 scanned ports on 10.23.47.12 are filtered
[Code]...
So my questions is, how is technically possible to implement this kind of restriction within hosts connected on the same network? It's the first time I see this kind of configuration.
View 1 Replies
View Related
Oct 22, 2010
I would like to setup a remote desktop for my Ubuntu computer so I can use my computer on a Windows computer that is on a different network. How can I do this?
View 1 Replies
View Related
Nov 7, 2010
I have done a fresh install of the OS and I am having wifi trouble. I am failing in connecting to an access point that Windows works fine with on the same machine. As far as I can tell it is connecting but not getting an IP address via DHCP. when running ifup it says its backgrounding getting an ip address.
View 9 Replies
View Related
Mar 18, 2010
I have an ubuntu kk laptop connected via wireless to my mixed network (xp, win7, other ubuntu), but i can not ping said machine or connect via ssh. Internet and smb-browsing ON this machine work, as does pinging FROM it. If this was a windows machine, I'd say a firewall is in the way, but since it's a vanilla karmic install, this should not be the case (or should it?).
View 2 Replies
View Related
Jul 24, 2010
It seems whenever i create a folder it creates the folder as untitled folder, but i can't change the folder name it just says "you don't have permission to rename item" but yet i created the folder and it is there. One thing i have noticed is that once i enter a folder it won't even let me move the folder.
View 6 Replies
View Related
Dec 3, 2008
I have ubuntu-8.04.1-server installed on virtual machine. It works perfect. Now, I made copy of this virtual machine. I started that copied machine and it works fine, except one thing: network does not work!
I have several others VMs with freeBSD, openBSD or Windows on it, but only ubuntu machine hes network problem after coping. I tried some other VM with ubuntu on it - same problem! I downloaded VM with ubuntu - same problem.I take a look into /etc/network/interfaces file and it looks just as it should (same as before coping) but ifconfig command returns parameters for lo only (before coping there was eth0 and lo).
View 2 Replies
View Related
Feb 13, 2011
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies
View Related
Apr 16, 2011
I remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
View 5 Replies
View Related
Aug 28, 2010
I am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
View 3 Replies
View Related
Apr 9, 2010
I need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies
View Related
Jul 23, 2010
I want to make my machine to PXE boot windows from another machine having RHEL5.2. I know the procedure to PXE boot linux, but I want to know is it possible to PXE boot your client machine with windows XP.
View 1 Replies
View Related
Mar 1, 2011
I've run into a weird problem. Two of my linux machines (A and B, both running CentOS 5.5) are connected to the same wall ethernet socket via a hub. Bothf them are configured for static IPs. The trouble is that when machine B goes offline or hits a kernel panic, machine 1 goes offline too. What I've noticed is that in this condition the "route" output from machine A does not show any entry for the default gateway either The contents of /etc/sysconfig/network-scripts/ifcfg-eth0 for machine A are:
Code:
# Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller
DEVICE=eth0
[code]...
View 3 Replies
View Related
Feb 22, 2011
Right now I just installed open ssh because i was told its a great thing to have for remote controlling my machine if I am at work on my windows system. My question is, how on earth do I acess my machine from my windows machine now that its installed? i did sudo apt-get ssh and thats about all so far...
View 5 Replies
View Related
Oct 31, 2009
I have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
View 14 Replies
View Related
Aug 3, 2010
I'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies
View Related
Apr 8, 2010
So I am trying to learn a little about Cygwin and rsync. I'd like to rsync some data from a Windows machine to a Linux machine. I've got Cygwin installed but I can't figure out how to tell Cygwin were rsync will be pulling the data from; basically, how to set the directories that I want to be rsnyc'd. I've googled and googled but I can't seem to find the answer to this exact question.
View 4 Replies
View Related
Jul 27, 2011
This is a thread I've moved over from the install forum and is hopefully more focused. Sorry if I have violated some protocol. Problem I have a new machine build configured to dual-boot Windows 7 and OPENSUSE 11.4. Network performance in Windows is very good but network performance in OPENSUSE is very poor.
[Code]...
View 4 Replies
View Related
Sep 27, 2010
I installed OpenSuSE 11.3. The only "extra" package I put in after the install was VirtualBox-ose. The firewall is disabled. I gave the machine a static IP address. I can get to the Internet from the machine. I enabled sshd to start on boot with "chkconfig sshd on" and also verified the service is running on the machine. I can ssh user@localhost from the machine as well.
When I try to connect to SSH from another machine, I get a connection refused. I verify that the firewall is down. I also try to get to VNC -- same problem: Connection refused. I ping the machine for fun. If I try to SSH again, it sometimes gives me a logon? I would check the server logs for the connection refused, but I wouldn't know where to look. I started in /var/log/messages, but nothing seemed to jump out there. I also find it strange because I can RDP to a windows guest running under VirtualBox. The Windows guest uses Bridged Network and DHCP.
I also find it interesting that I sometimes type a "ping google.com" from the 11.3 box and it will just hang - no output. Then I open firefox and get to the internet. All of a sudden, ping starts to give output. Could this be a neetwork card issue? A configuration issue? I don't know where to start.
View 1 Replies
View Related
Apr 23, 2010
I currently have two computers at my desk, 1 is Fedora 12 and the other is Windows Vista. I am using the synergy client to share mouse/keyboard but I would like to run Xming which is a Xserver for windows to display on my Windows machine. I have 3 monitors 1 is connected to the Linux machine and then I have 2 connected to the windows vista and I want to share 1 one using a windows Xserver. I have the server installed and setup on my windows machine and I just curios on how to configure my Xorg.conf file to use my Xming Xserver as a seccond monitor.
View 3 Replies
View Related
Sep 28, 2010
Recently loaded 11.3 onto a virtual machine, however none of the network settings will allow me to connect to the internet. First time Ive had this happen, other distro's Ive experimented with connected with no problems. I recall seeing a similar topic some time ago (dont remember if it was here or another forum), but at the time, there had been no fix. Anyone know if this has been fixed?
View 5 Replies
View Related
Jun 2, 2011
My goal is to install Windows 7 on a virtual machine running on Ubuntu. The Lenovo machine came with Windows 7 installed, but did not come with a boot disk. What are my options? Should I ask Lenovo for a disk? Will I need to purchase Windows just for the virtual machine?
View 3 Replies
View Related
Jan 16, 2010
I was wondering if by installing a p2p client on a Linux machine (e.g.bittorrent, emule, limewire) it was possible to exchange file with users having a Windows machine.
View 5 Replies
View Related
Dec 2, 2010
I had an OS 11.3 machine running as an Nis server with Nfs, also providing dns, squid, samba shares and running apache
Internet connection provided by a netgear router at 192.168.0.1, server at 192.168.0.2, clients at 192.168.0.3, 192.168.0.4, etc. The clients all being configured to use the server for dns the squid running on it for their proxy, logging on with Nis using the exported server's Nfs /home share as /home on the clients
Everything was setup through Yast with some conf file editing being done later for samba and apache and all working brilliantly
Until ...
I added another network card to the server machine and set it up as a router, where they will be placed once ready the router providing the internet connection doesn't have gigabit ethernet
So I figured if I had gigabit cards in the clients and a gigabit card in the server set up for the internal zone and providing routing, then the clients using it as their router the local stuff would be more responsive, especially as they are using an nfs share for /home
I set the clients up to use the server at 192.168.1.1 for their router and changing their own local ip addresses to suit, i.e. 192.168.1.2, 192.168.1.3 etc and rebooted
Nis and nfs were no longer working, so I logged on as the local user, ecky, who's home directory isn't in the nfs share but at /ecky, the internet connection worked fine and so did everything else, dns, proxy, etc
I tried changing the nfs share and nis server to the internal card's ip, 192.168.1.1 and that didn't work either
Samba shares work at both 192.168.0.2 and 192.168.1.1, so my problem is that nis logons and nfs mounts don't work from either address
I've tried to give as much info as possible on what I've done without being too confusing ... don't know whether I succeeded
Darned annoying cos it took me a day and a half to get the gigabit card to detect properly in one of the machines...
View 6 Replies
View Related
