Debian :: Cannot Boot Windows After External Install?
Mar 12, 2011
I cannot boot windows after I installed Debian to my external hd.When I turn on my PC, GRUB prompts me to boot either Debian or Windows. It says that windows is in the right place (sda0) but if I go to boot it, I get a message that says: "Windows could not start because of a computer disk hardware configuration problem.Could not read from the selected boot disk. Check boot path and disk hardware.Please check the Windows documentation about hardware disk configuration and your hardware reference manuals for additional information."
View 4 Replies
ADVERTISEMENT
Jul 11, 2010
I installed Ubuntu on external USB hard drive and while booting I did got option to log into windows XP, Ubuntu. Both operating systems ran fine. i.e. GRUB had overwritten MBR and I was able to dual boot. Main issue: I have installed Ubuntu in external hard-drive so that I can use Linux whenever I want other people who are using same computer can operate on WindowsXP. Sometimes my external hard drive gives problem if there is loose connection and so that oper people using computer do not face any problem I want to disconnect external USB HD whenever I am not using Linux. GRUB menu was pointing to external hardrive so disconnecting it meant my system wont boot!!I rewrote MBR using WindowsXP CD recovery mode. Now I am unable to boot from external USB hard disk( I thought I would be able to if I choose USB hard drive in BIOS option but it did not work it logged into WindowsXP by default).Is there any way I can change WindowsXP boot.ini file so that it also shows Ubuntu in external hard disk? Or is there any way.(I do not want GRUB way as then I would have to keep my external drive connected to log into windows - which I do not want).
View 1 Replies
View Related
Apr 9, 2010
I installed lenny and now my windows 7 won't boot. When I select it in Grub the machine just restarts the bios after a few seconds of black screen. The machine I'm using is a very vanilla intel p4.
I'll paste my /boot/grub/menu.lst below. All of the drive options look correct. I properly shutdown Windows 7 before installing lenny. I'm sure I can reinstall the mbr and get my windows back, but I would like to dual boot with grub.
View 9 Replies
View Related
Sep 4, 2015
I have a Dell laptop (inspiron 1150) which was dual booting Windows XP and Ubuntu 9.04. I have successfully installed Debian Jessie Standard over the Ubuntu. I pre-partitioned using gparted-live to make a separate single partition for the Debian install. Guided partitioning was then carried out by the installer producing separate /, /home, and swap partitions. After installation, the grub menu shows an entry for Debian and Windows XP. I can boot Debian, but not Windows XP. The symptoms are the same as reported in other forums: A terminal is displayed, vanishes and the system reboots defaulting to the Debian boot.
The grub.cfg file for the Jessie system has an other-os entry:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
set root=(hostdisk//dev/sda, msdos2)
search --no-floppy --fs-uuid --set=root cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The original Windows entry for the Ubuntu install was:
Code: Select allmenuentry "Microsoft Windows XP Home Edition (on /dev/sda2)" {
insmod ntfs
set root=(hd0,2)
search --no-floppy --fs-uuid --set cc0ce0ab0ce091ae
drivemap -s (hd0) ${root}
chainloader +1
}
The partitions produced by partman look OK (during the pre-partitioning I did not touch sda1, sda2, or sda3):
Code: Select all~ # fdisk -l
Disk /dev/sda: 37.3 GiB, 40007761920 bytes, 78140160 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code] .....
Partition table entries are not in disk order.
The os-prober found XP:
Code: Select all~ # os-prober
/dev/sda2:Microsoft Windows XP Home Edition:Windows:chain
So it seems that everything is in place, but there are perhaps important differences in the grub.cfg files. Are the two "set root" commands equivalent for example?
View 5 Replies
View Related
Jul 29, 2011
how to install Debian after Windows is already installed. Could someone give me a brief guide to begin the process of installing Windows? When I installed Debian I already made a partition for windows (in the same hard disk), I hope I did it right.
View 3 Replies
View Related
Jan 28, 2011
is it safe to install a dual boot windows 32bit and a linux 64bit on the same pc?
View 14 Replies
View Related
Oct 23, 2010
Can Ubuntu install and boot from external HD while still booting windows off internal HD?In an attempt to spread Ubuntu my friend wants to use ubuntu off an external HD and still have windows fully operational on the internal HD. Questions:1) Can Ubuntu install on external HD without tricky mounting methods and if so how doabout it?2) The bois have the capability to boot from usb, will grub work?
View 9 Replies
View Related
Jan 4, 2010
does anyone know that if i can boot from an external hard drive with "openSUSE" installed on it?
how about FireWire, will it work?
i'm trying to set up a triple boot for me newly bought iMac.
View 4 Replies
View Related
Sep 19, 2010
I have a laptop with a busted screen and no way to boot directly to the external monitor with ubuntu installed and the thing is I want to install windows 7. Anybody know of anyway to do this without being able to see the screen before the os loads? So far I have messed around with installing windows 7 in vm box and trying to turn the vdi file into a valid partition and also tried installing it with wine but it couldn't find the temp folder to copy the install files.
View 5 Replies
View Related
Aug 11, 2010
i currently have lucid installed on my laptop hard drive. i took this drive out and then on a new drive in its place i have installed windows 7. reason why i couldn't put windows 7 on the same drive is that i have a BIOS based system and the hard drive is GPT based not MBR. therefore, i couldn't get windows back on it.
I figured that using an esata expresscard interface i should be able to use the Windows 7 drive externally without much speed penalty since ExpressCard in my case is implemented on PCI Express and not USB.
So i can update grub using
Code:
update-grub
and Windows 7 appears on the list. However, when i select this option during boot, it gives me errors that indicates that the external drive cannot be found (not surprising)
My guess is that when GRUB appears, the external hard drive has not been detected yet, and the modules for the expresscard may only be loaded during the boot process of lucid.
So I am wondering if there is anyway I can get this to work. meaning use lucid on my main drive and boot to Windows 7 from the external drive time to time.
View 8 Replies
View Related
Jul 18, 2011
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies
View Related
Apr 10, 2010
I have Mandrake 7.1 installed on a laptop and I have several problems that an upgrade would likely fix or provide a path that will support a fix. The Mousepad is irratic and the PCMCIA WiFi and Ethernet cards are not recognized. What's a good way to upgrade? (I can access the network from an external modem and from a dual-boot Windows 98 WiFi)
View 7 Replies
View Related
Sep 19, 2010
i use ubuntu a lot but there are somethings that it cant do and i need to use windows for. the thing is that i cant install windows via os cd because it won't consider my usb hdd an official hdd, it says to remove all other portable hds or something before installing so it prevents me from getting windows.are there any other ways to get windows xp and still be able to keep ubuntu?
View 2 Replies
View Related
Feb 23, 2016
In my pc I have Ubuntu and Windows while Debian on external HDD, and when boot from usb opens a black screen. Have done a boot-repair test and the result is this: URL... (there isn't MBR in sdb) now I need to istall manually it. What are the commands?
View 3 Replies
View Related
Jul 31, 2010
I have a laptop that came with no OS. It has no internal HDD, so I formatted a 320gb external HDD and installed openSUSE 11.3 from another computer onto the external hdd. I can't seem to boot from the external hdd on the laptop though. I have it set as the primary boot source in BIOS. Is it possible to boot from external hdd or am I missing a step?
View 7 Replies
View Related
Sep 18, 2015
I have got a 1TB USB hard drive, which I partitioned to be 500GB NTFS and on the other half I installed Debian 8.1.0. During graphical install I selected to install the bootloader not to the MBR but also to the external drive. After completing the installation I wanted to boot into Debian, but it just started Windows, which is installed on my internal. Even after choosing the USB drive in the boot menu, Windows booted. I later installed the bootloader to my internal, then I could boot into both Debian and Windows, but only if my hard drive was plugged in.
View 14 Replies
View Related
Feb 20, 2016
I have a 2TB external Hard drive that nonetheless is being used for booting Debian off of. I have downloaded the "debian-8.3.0-amd64-netinst.iso" and have extracted it to my external hard drive. The letter assigned to this drive is "I". When I shut it down and enter the boot settings, it asks me for a name and a path for a new boot option. I have tried many different paths including:
Code: Select allI:setup.exe
I:autorun.inf
I:debian.iso
setup.exe
debian.iso
I renamed the original Debian download (debian-8.3.0-amd64-netinst.iso) to "debian" so I didn't have to type the long file name into the path. When I type in "I:debian.iso" as the path and restart it pops up with a grub prompt, in my mind that tells me that some part of the debian.iso file is corrupted.
Specs:
Dual Core i5-3317U, 1.7 GHz, Turbo boosted
8GB RAM
1TB Internal Memory
64-bit OS and processor
Windows 8.1 Default OS
View 5 Replies
View Related
Nov 20, 2009
This sounds strange, but my laptop (running 11.2) won't boot correctly unless my external HDD (ext3) is on and plugged in. If I don't turn it on, it hangs at the start of udev. If I press ctrl+c, the system continues to boot, but the keyboard and mouse don't activate... don't function, etc. But I can press my power button and it does shut down. Going through dmesg (during a successful boot with the external HDD on), I saw this (not sure if it is relevant):
Code:
[2.201029] scsi 2:0:0:0: Direct-Access Ext Hard Disk PQ: 0 ANSI: 4
[2.201450] usb-storage: device scan complete
[2.206637] sd 2:0:0:0: [sdb] Spinning up disk......
[6.062434] udev: starting version 146
[6.225262] .
The device sdb1 is the HDD.
Now, I don't know much about udev. I can tell you that I have no sdb1 lines in /etc/fstab, and I have no autofs references to it.
View 8 Replies
View Related
Dec 3, 2009
A while back when 11.0 was recent i upgraded my computer to an hp pavilion desktop which only had SATA which wasn't compatible with my 500gb IDE hard disk. I then decided to buy a compatible hd (500 gb as well) and use an external hard drive case to put my old one into(which plugs into the USB ports) i currently have the external 500 gb partitioned with a linux native mounted at /home, and my other with NTFS and linux native mounted at /
Prior to updating to 11.2:I could power on my external hd(Thermaltake A2396) after grub and it would boot up no problem. if i turned it on too late or before grub was done it wouldn't load and i would have to log in as root in repair mode, turn the hd off then back on, wait for a couple of lines to pass(I assume the drive being detected) then mount /home, and init 5This didnt really bother me for the previous versions of suse much because i just had to remember to turn on the drive After updating to 11.2:the only way to boot is to wait, do the power on/off, mount /home, and init 5this gets to be quite annoying after a while and i was wondering if anyone knew a way to get it to mount itself while its booting. let me know if you'd like me to post any more info
View 8 Replies
View Related
Jul 24, 2009
I have sevral older machines that cannot boot from usb. Until now I have installed fedora using the provided boot.iso on a CD and an external USB dvd drive with the full install DVD.
With Fedora 11, this fails. It gets as far as "finding storage devices" and fails, telling me that an unhandled exception has occured. It offers to save the details, but freezes looking for a suitable location. I have no such problems with the same DVD/external rw drive on systems that can boot directly from usb.
View 2 Replies
View Related
Oct 8, 2010
I am trying to get my computer to mount an external folder on a different machine with :
Code:
//192.168.1.200/share1/mnt/Documents cifsauto,users,username=user,password=useruser,uid=Alastairo,gid=users0 0
[code]....
View 5 Replies
View Related
Apr 8, 2011
I'm trying to install Ubuntu 10.04 (32-bit) on my external harddrive, and the boot loader also on my ext.HDDThe problem is, is that the boot loader won't install himself on my HDD. Is it possible to install the boat loader still on my external HDD?
View 1 Replies
View Related
Jun 9, 2011
I have an external hard drive connected to my iMac. I have installed Ubuntu on unallocated space on my external, the first time I chose to put the bootloader on the external but when I booted up the computer and held the Option key it didn't recognize an OS to boot from.I am currently reinstalling Ubuntu but placing the bootloader on the internal hard drive hoping that the Mac boot menu will recognize an OS to boot from.
View 1 Replies
View Related
Sep 9, 2010
I have read other posts regarding the installations of different distros on external hard disk, but these did not help..
I want to install fedora 12 on a new external hard disk, so that i can boot from it on any system that supports booting from usb hard disk, and do all my work from the extenal hard disk itself. I want to know the exact procedure to install fedora on extenal hdd, and what do i need to do, so that the grub, (which i will install on the /boot partition of external hdd), get detected by the primary boot loader of mbr..
Or, I just need to boot from external hard disk.. please any one try to make it possible.
View 5 Replies
View Related
Feb 28, 2010
I have a complete set of the Debian 5.0.4 DVD ISOs in an NTFS partition on a drive in an external case with a USB connector. Can I boot the Debian installer on DVD 1 and then plug in the external drive and tell it to extract the files from the ISOs there? Or should the eternal drive be connected and running when installer boots?
View 3 Replies
View Related
Feb 6, 2010
I tried to install Ubuntu on an external drive, but it doesn't boot, but it installed GRUB on my main HD, and now I can't even boot Windows. I only get a "grub rescue" prompt. I need to remove GRUB. How to do it?
View 6 Replies
View Related
Nov 11, 2009
I have an Acer netbook that I installed Remix on. Now I can't get the thing to boot from the CD drive which is connected via the USB port. Any suggestions? I set the boot order with the CD drive first and the HD last.
View 1 Replies
View Related
Jan 20, 2011
Alright, im completely new to linux. I am somewhat knowledgeable with computers in general. My programming instructor for school told us that it would be in our best interest of the course to grab a linux distro and install it on our computers. (Don't ask me why, i dont know)ANYWAY, i am trying to get debian to install on my external USB 1.5TB Seagate HDD Drive. After learning a lot about Murphy's Law, i had to fix my MBR for windows (the windows installation is located on my internal SATA 1.5TB Seagate Drive) because GRUB wouldnt boot to windows unless i had my external plugged in.
So, the natural solution to me was to fix the MBR, unplug the internal, then re-install on my external, it worked. Well to my surprise, this cloud i was on... wasn't cloud 9. NOW, Debian will boot if i have the external plugged in and windows will boot if i have the internal plugged in. The Problem is, when i have both plugged in and my external set as the boot drive i get this weird error and it will not let me boot linux.Now, i have searched for a fix.. But the ones i have tried so far haven't worked or i wasn't sure how to use those fixes(because im new).The error went as follows:/bin/sh can't access tty; job control mode offthen i get a initramfs command line. (I think thats proper terminology)The temporary fix i have going right now is i have my computer open and the SATA cable unplugged so i can boot to Debian.
SUMMARY OF HARDWARE SPECS:1.5 TB INTERNAL HDD (SATA)2 INTERNAL DVD BURNERS3 GIGs of RAM2.8ghz AMD Athlon x2 (I think its 2.EXTERNAL 1.5TB HDDDEBIAN VERSION:I believe its Debian 507 by looking at the download linkhttp://cdimage.debian.org/debian-cd/5.0 ... etinst.iso
View 13 Replies
View Related
Jul 9, 2010
I have the Debian Lenny 5-0-5 DVD's but they are not live bootable. They come with a setup.exe file which copies over the kernel images to boot from windows. Thing is that at the moment I am running the Ubuntu distro of Debian and cannot use the setup to do it. Can anyone tell me how to boot this disk in ubuntu itself?
Also does the debian installer allow you to choose which disk it installs to?(I am talking about the thing in the ubuntu installer that allows you to partition disks and define your own mount points before the install)
View 1 Replies
View Related
Apr 8, 2010
How can I install linux using an external hard drive? ANy help would be greatly appreciated. I dont have any CD's or anything and this is my only option.
SO how can I install linux FROM my external HDD ONTO my internal HDD?
View 1 Replies
View Related
