Red Hat / Fedora :: Samba - Connect To Home Network With 12
Feb 7, 2010
I'm looking for an easy guide to connect to my home network with Fedora 12. So far I did what I thought was pretty straight forward but I'm not seeing any computers. Here is what I've done
yum install samba
restart
system settings -> advanced -> samba
I set up my two paths that I wanted to be shared when I go to network in Dolphin I'm seeing Network, Network Services and Samba Shares If I click on Network nothing shows, same with Network services, samba shares shows nothing and the bottom reads "unable to find any workgroups on your local network. This might be caused by an enabled firewall"
There are two workgroups which my Ubuntu machine shows fine, workgroup and mshome, I can connect to my roomates and my girlfriends computer no problem within Ubuntu (they are running XP, Vista and Ubuntu).
View 1 Replies
ADVERTISEMENT
Jul 17, 2010
I want to use samba for file sharing like on a Windows home network. Actually they are all Linux machines but nfs is too complicated. On my host machine I installed samba and system-config-samba. I created a new share for /home, check marked writable and visible and put access to everybody. For preferences-->server settings--> security the "authentication mode" is set to user, encrypt passwords is no, and guest account is no guest account. Under preferences-->samba users I added myself as a user with the same windows user name as my Linux user name and the same password.
My client is a virtualbox fedora (used for testing purposes but actual clients will be real computers on my home network). I entered the address smb://192.168.1.184. When asked for the user name and password I put my regular user name and password since that was what I set in samba users. However, the password dialog keeps coming up and won't let met into my own computer. If I quit it says something like access is denied. How can I get my home network back? I liked this feature when my home computers ran XP but I switched them to Fedora 12.
View 2 Replies
View Related
Aug 4, 2011
Linux and have a western digital server (my book world edition) I can access it with Ubuntu 11.04, just by downloading Samba and then by clicking on network and the server shows up, but with Fedora 15, after I have installed Samba, I click on network and all that shows up is my router?
View 1 Replies
View Related
Jun 16, 2011
The Fedora machine acts like print and file server.But the problem, its the conection time.When i start the machine with fedora, takes like five or more minutes to appear in "My network places" in the windows machines, and if the server dont appear, i cant print and browse in the server files with the windows machines.I can browse in the internal network files (Windows folders) from fedora all the time, i have internet conection and with the internal network all the time, but the server just dont appear in the network places in the windows machines when i just start the server.
I check the samba status when i start (in the terminal), and its running.And i have a control program called "Control of Ciber", this program connect with the "Slaves" terminals and the conection appear in the server, but when i just turn on the server, the machines appear offline, and they connect after the same time taken for the server to appear in "My network places" in windows.I dont know if have a relation, but i cant open the share folders of the fedora machine in the windows computers, a error dialog appear (Privileges problem), and i just cant see the files in the folder.I give administrator privileges to everyone in this particular shared folder (Chmod 775), and i put the "Security = share" in the samba file. This issues dont happen in debian or ubuntu with the same configuration
View 1 Replies
View Related
Apr 1, 2009
Since I installed fedora on my desktop (there is no other OS on my desktop computer at the moment) I can't connect to my laptop which has Windows XP installed on it, although I can normally connect to internet from both computers. Here is the drawing to illustrate how everything is connected:
On the picture you can see that the phone line goes to the ADSL modem. The ADSL modem is connected to the Wireless modem with LAN cable. Wireless modem is connected to my desktop computer with LAN cable, and trough the wireless connection to the laptop. Internet is working fine for both computers, but desktop can't see laptop and vice versa. What do I need to do in order to see the laptop?
View 1 Replies
View Related
Aug 6, 2010
I know Windows forward and backward but I am so new to linux it's just wrong. I just installed fedora (like 1hr ago) on and old toshiba laptop with a WiFi PC card. Everything seems to work fine except. My Networks connects to my home Wifi network but it will not connect to internet. When it connects the IP address isn't even close to being in the same range as my other laptops and PCs. Like I said I'm new to linux but I'm wanting to learn. Any fixes for this issue? Which linus book is the best one to read for a beginner? Other then not connecting to internet I have no complaints.
View 14 Replies
View Related
Mar 20, 2010
Iam trying to get samba work with no password on my home network. I want to have Writeble permissions for creating files and folders and sub folders in the shared folder with no password needed.
I have this set up
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[Code].....
I can access the /home/seb/ directory but cant write in it. And with the same permissions for the down directory I cant even access the folder from the other pc it only says "Could not display "smb://laptop/down".The file is of an unknown type"
And finally how can I clean up the smb.conf so it is readable?
View 5 Replies
View Related
Sep 1, 2010
I've used Samba for several years and when it works it's great. Unfortunately from time to time it seems to get messed up and either all the 7 machines on my home network can't be seen or I can't access the shares on some. I have 2 Windows XP computers 4 Kubuntu and one Linux Mint KDE, all the latest versions. I'd rather not plough through all the documentation for Samba, but would really like a "model" smb.conf with a few comments about parts that might have legitimate variants. I have researched this with Google searches many times but have failed to find the information I need in concise form.
View 4 Replies
View Related
Mar 27, 2011
Continuing with my assigned task of migrating the company's PCs to GNU/Linux (openSUSE as server for GNU/Linux clients) I managed to set up a DC with roaming profiles for the few remaining Windows users, user validation and login for the openSUSE boxes and a few network shares with different rights. I know there are no roaming profiles for GNU/Linux and I can live with that but I would like to specify wich users/groups would have their home directories saved locally (notebook users) and which will save them on the Samba server.
By default home directories are saved locally but somehow Samba creates a minimal home directory for each user under /home in the Samba server. How can I tell the client box to use that directory? and how can I set up the few notebook users to save it on their disks? Maybe using the options under Yast > Security... > Users and groups management > Users (LDAP Users filter) > and then select the user and use the "Manage Samba account parameters" plug-in for specifying the different paths cant achieve this.
View 4 Replies
View Related
Jan 5, 2010
I am still building my home network, and want it o be able to connect to different computers by:
\pc-name
We have 2 types of computers:
Computers in the workgroup WORKGROUP (2 debian, 1 vista)
Computers in the domain TUE (required by our university) (3 vista, 2 xp)
Within the workgroup, I can call pc's by their name, but this is not possible by the pc's in the domain. I can however always do \ip and the 2 debians have a samba server running, which is available through \ip (and \name, for the computers in the workgroup).
View 5 Replies
View Related
Jul 19, 2010
While my wireless is generally working, there's one problem: I can't connect to my home network through it on my laptop. My desktop (which has an Atheros-based wireless card and is configured through ifup) connects just fine, as does another family member's laptop (also with an Atheros chip, but using NetworkManager) My laptop (With an Intel Centrino wireless chip), however, will not connect to the home router, though it can connect to public (unprotected) access points such as the one at my school. My home network is a private (hidden) network and also requires a WEP key to connect to and, as mentioned, works fine with several other systems running 11.3. I've attempted to use both ifup and NetworkManager and can't connect using either method. With ifup, the connection attempt just seems to time out during the connection attempt, while with NetworkManager, it doesn't even seem to try: I select the connection that I defined and click "Connect" and nothing happens after that. I'm using KDE and installed from the LiveCD
View 2 Replies
View Related
Jun 21, 2010
IWithout having made any configuration changes (that I am conscious of), for the past few days I have been unable to connect to my home network - and hence to the internet.My 64-bit Kubuntu (10.4) is on a dual boot machine.If I boot XP then things work as they have done for the past year or so - no network connection problems at all. So I know it's not hardware, LAN or router/cable-modem related. In addition none of the other systems on the network have a problem.
I tried to check if there are some firewall settings that might have changed - but cannot seem to find anything about the firewall in my Kubuntu set-up. Indeed I cannot figure out how to do any problem source identification.
View 1 Replies
View Related
Oct 13, 2010
I've been using Ubuntu 10.10 for 2 days and there's one problem left to solve. It cannot connect to my home encrypted wifi but it has no problem connecting to open wifi. I used this site [URL] to change my wifipassword but it still doesn't work. Interestingly my Windows partition connects to it without any change so I don't even know if I'm really changing the password. The router is a Linksys WRT54G2. How can I change the wifi password, know what it is, and make sure Ubuntu knows how to connect to it?
View 2 Replies
View Related
Apr 14, 2010
I have a network that consists of a few desktop machines, laptops, and two Internet connected linux servers. The Linux servers are the gateways, routers, and firewalls for my desktop and laptop machines.Whenever I'm away from home; I can connect to my home machines over the Internet by first ssh'ng (technically I use Webmin; because my firewall on each Linux servers blocks ssh from the Internet.) to one of the linux servers and then ssh'ng to the desired machine on my home network.
This works fine for my home linux machines. But not my Windows machines.I'd like to be able to rdp or rdesktop to my Windows machines.Will OpenVPN allow me to accomplish this ?
View 14 Replies
View Related
Jan 4, 2010
I am trying yo install the Samba package but not able to as it is failing to connect to RHN network. Do I have to register to RHN in order to get the SAMBA ?
View 3 Replies
View Related
Apr 20, 2010
i am searching for way to connect to my home network from any point only just if i have internet. i've heard about VPN and i think that this is right solution for my problem. can anyone point me to doc for beginners for setting up a VPN server? ps i've already searched for some articles and found two which were really for newbie, but it is interesting to find "best" how to for configuring vpn server.
View 1 Replies
View Related
Jun 3, 2010
This is my first ever time trying out a Linux based system and I would like to ask a quick question. When you plug in your cd/flash drive it comes up with the option to try Ubuntu before installing it on your hard drive. When I go to try I can't connect to my home network. Is this because it is in the try mode? Or something else?
View 4 Replies
View Related
Nov 1, 2010
why my VCN will not allow me to connect from my phone outside of my home network... When I do open up remote desktop it changes what it says... one day it says only available through Name.Local and then the other day it shows the IP address and says over the local network. I have tried going into gconf-editor and messing around but it still doesn't seem to work.. I'm not entirely sure how to mess around with my router.. and if that is necessary..
View 5 Replies
View Related
Mar 23, 2010
My USB printer is connected to an OpenSUSE 11.2 desktop on a home network. I shared the printer with samba and can print from a Windows XP notebook connected to the network, but whenever I try to connect a Windows 7 machine, I always get the message that Windows cannot connect to the printer.
View 4 Replies
View Related
Sep 6, 2010
I have steup samba shares on my Susi pc. I get to the point where the server asks for a password for the user I have on the Susi box but when I enter the password it fails to connect. tried to add the user, password and enabled the user in the samba conf file. But not sure where it should appear I give below the smb.conf file:
# smb.conf is the main Samba configuration file. You find a full commented
# version at /usr/share/doc/packages/samba/examples/smb.conf.SUSE if the
# samba-doc package is installed.
[code]....
View 5 Replies
View Related
Apr 14, 2010
I am running openSUSE 11.2 and just recently my network has been down. I'm using Gnome, but using Yast to configure my network (I'm usually forced to use wireless as I travel a lot on my laptop). Usually, when I'm connected to a wireless network, it will show up as so in the Gnome start menu, but recently, it will only say Wired there, even though I have nothing connected to my ethernet jack. I can connect wirelessly to a home router, but cannot use the wireless in any other way. I have tried manually disabling the ethernet connection to no avail. Unfortunately I am limited in my linux knowledge, so I am kinda stuck here.
View 1 Replies
View Related
Jan 14, 2010
I have a home network of 4 computers - 3 Windows & 1 Xubuntu I'm able to connect to the Xubuntu machine from all of the Windows computers, but I can't do the opposite - connect to the Windows machines from the Xubuntu. I'm using Gigolo, and I can see the network, but it says no servers found.
View 5 Replies
View Related
Jan 17, 2010
I am trying to connect to my home network which is wpapsk when i click on the networking item in the tool bar at the top it shows my network and when i click on it to join the network it asks my for my security and it only lists wep 40/128-bit key or wep 128 bit phrase or leap?? or dynamic wep(802.1x)
there is no choice for wpa. but when i set up a new network or attempt to edit the network listed under wireless i can see wpa but the system does not connect i have tried looking around for info all with instructions on "enabling" wpa by using wpasupplicant which is there but nothing happens in fact when i try the code sudo gedit /etc/network/interfaces i get command not found which in all the techniques i have tried require this line.
View 9 Replies
View Related
Jan 22, 2011
I got my netbook in the mail yesterday, opened it up, logged in, and Windows 7 was installed. Being a Windows hater my whole life, I followed a friend's advice and downloaded Ubuntu netbook, made a USB drive, changed the BIOS settings, all that. Here's when the stupidity occurs--I decided to go ahead and install Ubuntu without trying it, and to delete Windows to do so. A couple minutes later I realized that was a really, really stupid idea, so in a panic I turned my netbook off. I turned it back on and it was still on install but not really moving, so I powered off and on again and went back to the "Try Ubuntu" or "Install Ubuntu" choice screen. I chose "Try Ubuntu" and found that it did not recognize my home wifi network or ask me to join--or any wifi network, for that matter.
Now, it did recognize my wifi network the few minutes I spent on Windows 7, so I tried to change the BIOS settings back to where I could just use that until I figured out the problem. But no matter which setting I tried (HDD/SDD just gives me a black screen, and FDD and LAN do the same as the USB drive), I can't get back to Windows, so I guess I did delete it. Which leaves me with a netbook that can only connect to the internet via ethernet cable. Which kind of defeats the purpose.
Questions I should answer:
1. How am I trying to get online? My home's wireless network. We have a router. All the other laptops in the house connect fine.
2. Who is my internet service provider (and in which country?) COX, United States.
3. Can you get online with any other method? Yes, the internet works fine with an ethernet cable.
4. How am I getting online to post in this forum? My parent's laptop.
5. What hardware are you using? Toshiba N505 netbook and a router. I can give more information about the router if you need it, but I doubt it's the program since the other laptops are fine.
Give me one moment and I will add some code that it gives me when I put in the commands this website tells me to.My two final questions are:
1. Is there any way to recover Windows without buying it again?
2. How can I get Ubuntu to connect to my home wifi network?
EDIT: Here's some code. I have no idea what it means, but hopefully you do.
To run a command as administrator (user "root"), use "sudo <command>".See "man sudo_root" for details.
ubuntu@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation N10 Family DMI Bridge
00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller[code]......
View 1 Replies
View Related
Jan 2, 2011
I have an Ubuntu 10.04. It connects perfectly with a Netgear wireless to the internet at my work place. But i cant connect it to my home Netgear network. It connects to the router. Receives IP address. But no internet. But I'm able to connect to internet using ethernet. I'm also able to connect to internet wireless in my Windows.
View 5 Replies
View Related
Aug 9, 2010
I have one pc on which I have installed slackware and samba (fixed IP, mask 255.255.255.0) I have another PC (also XP) which also has fixed IP running XP, and I can connect that to the slackware server easily My third PC connects to the internet and gets its IP address from the Cisco router(?) that provides the IP and mask on boot up.
I tried changing the IP and Mask on the slackware server to match the internet PC (which uses a mask 255.255.254.0) but the PC mask and IP changed on the internet PC I want the PC that connects to the internet to also be able to connect to the slackware server, but I see no need for the slackware server to also connect to the internet - I will mainly use it as a file server When I worked for another company I think the IT department talked about having 2 network cards in the PC that connects to the internet
View 6 Replies
View Related
Oct 8, 2010
I recently got a lenovo w510 laptop and I installed openSUSE 11.3 KDE on it. the wireless works fine at home (802.11g WPA2) when I go to work I have tried to set up the wifi for the 802.1X PEAP network but it doesn't look like it even tries to connect.
The work network set up is as follows. non-brodcasting SSID (do I need to tell network manager of this? I manually enter the SSID no problem)
Dynamic WEP 802.1X
PEAP
blank anonymous identity
no CA cert (I suspect this might be the problem)
PEAP v 1
MSCHAPv2
I have verified my username and pw several times, as well as the SSID. Just yesterday I helped a co-worker get on the network under ubuntu and it worked like a charm.
The Hardware profile displays the wifi card as a "WiFi Link 6000 Series" It is an intel card.
View 9 Replies
View Related
Jul 6, 2011
I tried to browse my home dir but I can not. I chown also with loek:loek /home Here is my sambaconfig:
[global]
workgroup = MYNETWORK
netbios name = LINUX
security = SHARE
log file = /var/log/samba/log.%m
[Code]....
View 3 Replies
View Related
Mar 3, 2010
I'm trying to setup a Ubuntu workstation in a corporate environment, right now just as a proof of concept but hopefully soon I will do the real thing. The problem is trying to establish a Linux equivalent of a roaming profile. The user logs into the Ubuntu Machine using their Windows Active Directory Credentials. (A big victory) Then I would like the client to mount their /home folder off of a Windows 2008 Small Business Server. So far I can make Ubuntu mount everyone's /home folders but I would like to narrow it down to only mount the specific user who has logged in and with proper permissions.
Mount the proper /home folder from the server with that users permissions so they are the owner, have full access etc. Only Mount the current users folder. Or any logged on etc. (I just don't want to mount every folder for every user that exists in Active Directory) Do it automagically.
I login as "dirtandgas est" (dirtandgas is our test domain) and here is the line from the FSTAB that's used to mount the directory.
Code:
//server/redirectedfolders /home/DIRTANDGAS cifs credentials=/root/.smbcredentials,iocharset=utf8,file_mode0777,dir_mode0777,rw,uid=892863608 0 0
Now I know if I changed that to the following, it would only mount the one directory, but I don't want to have to maintain the FSTAB on each computer for each user. (the point of using active directory)
[Code]....
View 4 Replies
View Related
Mar 17, 2011
I am using lucid lynx, it is my only OS. I have a home network using samba with another machine using Windows 7 (I know, it is my wife and she is not ready to change to Linux yet) I just built her machine and went from Windows XP to Windows 7. The network was working great for over a year, then with the new OS I cannot get Windows to share. I can go from the windows to the Linux fine, but when I go from Linux to Windows, I see the machine and the folders that I have shared, when I click on one it says "failed to mount", if I physically mount it it ask for a password, (I have it set up to connect without a password) I set up myself as a user and try to use my log-in password, the window pops back up asking for the password. I tried my wife's password, no joy. Windows 7 is a weird OS it wants to tell you what you should do and then does it for you. I won't let you do what you want, it does what it wants.
View 9 Replies
View Related
