Ubuntu :: Setup Samba To Connect To NAS Drive?
Aug 27, 2010
I am trying to setup Samba to connect to my NAS drive, so far I have it connecting but normal users only have read only access, this is what I have done so far
Code:
mkdir /media/Data
Fstab
Code:
//192.168.2.150/Data/media/Datasmbfsusername=username,password=password00
I know putting the username and password in the fstab is not the best, but to start with I am trying to get everything working.
what I need to do to give my normal users write access to the share?
View 2 Replies
ADVERTISEMENT
Oct 20, 2010
I used Samba to setup a Linux network drive in Windows. Is there anyway to do it vise versa?
View 4 Replies
View Related
Mar 15, 2010
I have the follow environment
PDC SAMBA + OPEN LDAP (ubuntu 9.04)
Linux (File Servers) + Windows machines all working well
I'm trying to set up a share drive on my new server using ubuntu 9.10 with samba (v 3.4) and ldapclient and the shares are not working when I defined Valid Users for share folders, that keep me ask me about my user and password, on the logs I have:
[2010/03/15 10:24:10, 1] smbd/service.c:676(make_connection_snum)
create_connection_server_info failed: NT_STATUS_ACCESS_DENIED
This is my smb.conf
[global]
workgroup = FLOWCONNECT
server string = OSLO SAMBA FILE SERVER [code].....
I have the same set up on my File Server (Ubuntu 9.04) which use samba 3.3 is working fine.Someone know if has some different setting between samba 3.3 (ubuntu 9.04) and samba 3.4 (ubuntu 9.10) that could cause this problem ?
View 1 Replies
View Related
Feb 12, 2011
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
View 6 Replies
View Related
Feb 22, 2010
how do you setup a Samba share from the CLI?
View 3 Replies
View Related
Mar 7, 2010
I just installed ubutnu 9.10 and just installed samba. I edited the config files to workgroup to dhome which is the work group all my windows comptuer uses to share files. I want to share files and also be able to access files off my windows computers. I got onne windows 2000 that has a username needed to be typed in to access it. the rest is accessable. In the config file. I uncommented the security= user thing. I now tried to access the network but still fails.
Here is what I can see. when I go to places and click network I see windows network and click it it will say dhome and Workgroup. when I click on the dhome folder it takes a while and then gives me the error saying sorry didnt' get a list from the server. what do I need to do to access the network?
View 1 Replies
View Related
Jan 7, 2011
I want to setup a file server using Ubuntu, The first thing I want to get off the ground is just simple file shares, is Windows 7 still having problems with Samba or has this been fixed? Secondly does anyone have a plain noob freindly guide on how to setup and get Samba off the ground
View 9 Replies
View Related
Feb 10, 2010
running a Ubuntu 8.10 Desktop in the living room with a LOT of files. I've tried all week to get this working, and can't tell where the problem is. I want to make a music share that will: Allow guests, but as read-only Allow me to mount in Windows 7 with the user 'thecheeks' Give user thecheeks read/write access to that share
I swear Samba ends up working but maybe the problem is with Windows 7. I looked at the SAMBAWiki Win 7 page and made sure my registry values were what they should have been (and they were).
View 1 Replies
View Related
Sep 24, 2010
I'm trying to setup two samba shares on ubuntu server 10.04.1 lts x64
The first is a Read-Only share for windows users that doesn't require a password. This i've managed to do so far.
The second is a Password protected Upload share. So far I am able to have both shares (which access the same directory) but am unable to log in to the pass word protected share.
I know i'm not doing things quite right, and would like a little bit of help
The smb.conf file is the default ubuntu file with these added shares:
Code:
[NAS]
Comment = Network Attached Storage
path = /media/RAID/NAS
browseable = yes
[Code].....
View 5 Replies
View Related
Dec 17, 2010
i am tring to setup SAMBA with webmin. the problem im having is that i can not login to the shared areas like homes and users. i can see them when i search my network i double click on them and it asks for user name and password. i have already set up a user using the convert unix user to samba user and have set a password. i have set teh Use encrypted passwords? to yes. when i try and log in it say login unsuccesful login or password my be incorect.
setting up SAMBA with webmin? Samba Configuration: i fould this one but didnt help. in uesing suse 11.3 and windows vista
View 5 Replies
View Related
Apr 28, 2010
I need to access a Linux box via SSH & Samba that is hidden/connected behind another one on its own local network.
Setup :-
Code:
A switch B C
|----| |---| |----| |----|
|eth0|<-->| |<-->|eth0| | |
|----| |---| |eth1|<-->|eth1|
|----| |----|
E.g., I need to SSH/Samba from A to C. How does one go about this? I was thinking that it cannot be done via IP alone? Or can it? Could B say "hi on eth0, if your looking for 192.168.0.2, its here on eth1"? Is this NAT? This is a large private network, so what about if another PC has that IP?! More likely it would be PAT?
A would say "hi 192.168.109.15:1234"
B would say "hi on eth0, traffic for port 1234 goes on here eth1"
How could that be done? And would the SSH/Samba demons see the correct packet header info and work??
IP info :-
Code:
A - eth0 - 192.168.109.2
B - eth0 - 192.168.109.15
- eth1 - 192.168.0.1
C - eth1 - 192.168.0.2
A, B & C are RHEL (RedHat)
But Windows computers can be connected to the switch. I configured the 192.168.0.* IPs, they are changeable. So I have read that this should be done via iptables? But what is the correct command line to do this? And where does one put permanent iptable config?
View 7 Replies
View Related
Mar 3, 2010
trying to setup samba on my centos box by following the tutorial After following the setup of my smb.conf and adding the users and files as per the tutorial I come across a few problems.If I browse my home folder, music or everyone folder i get for example \sambamusic is not assessable you may not have permissions to use this network response. If i browse the apps folder I get a pop up asking for a user name and password.
View 3 Replies
View Related
Mar 11, 2010
I have setup samba and shared /var/www/html on a shared folder so that i can access the folder directly via my IDE, however i cannor write file in there, is there any better way of doing it ?
View 1 Replies
View Related
Nov 19, 2010
I want to setup samba on Maverick. This is the case. I have 2 folders want to be shared, freeaccess and restrictedaccess. The freeaccess folder can be accessed by everyone on network. The restritedaccess folder can only be accessed with account named someone. What I want to ask is, how to setup samba that can solve that case...??
View 9 Replies
View Related
Feb 15, 2011
I have a couple of user accounts where each member belongs to a group i have created: Each user access the share using their own user account credentials.
How can I configure Samba in a way so that each modification done on the share gets the owner of the user and my group instead of the user and the users own group? I would also like the access rights to be 770 to each modification.
In other words, today each modification by "userA" get the owner "userA.userA" and I would like it to be "userA.MyGroup" with "rwxrwx---" permissions.
View 3 Replies
View Related
Mar 16, 2009
IM completly new to fedora but decided to give it a try after using ubuntu for a while,I have everything setup apart from sharing and im been fiddling for a while now.
View 1 Replies
View Related
Jun 1, 2011
Come back to forum after long gap, after using Ubuntu for the last few years i finally move to fedora again with Fedora 15. I like this version of Fedora, it's clean & simple. But i'm having few problems as well. I want to share some folder of my fedora machine with a windows machine of my home, so that my younger brother can access those folders from his windows machine & copy files to his computer. for this i need to setup samba, i already install samba related packages. but can't start system-config-samba from Application Menu. When i go to start this, it asking for authentication & after giving password nothing happend at all! i try to start this from Command line with-
[Code]....
at present, i can browse shared folders from other machine of my home network, but my fedora machine is absent in list of machines, so my brother can't access shared folders of my machine. how can i setup samba share in my fedora machine? so that i can easily share folders with other machine just like ubuntu.
View 14 Replies
View Related
Jan 17, 2010
My Samba setup works just fine however whenever I do stop/start/restart. I get these errors in the logs:
Jan 17 00:21:14 neutrino smbd[4297]: smbd_open_once_socket: open_socket_in: Address already in use
Jan 17 00:31:20 neutrino smbd[4557]: [2010/01/17 00:31:20, 0] smbd/service.c:1009(make_connection_snum)
Does anyone know what to think of these? My thought is since it works just ignore and probably the SuSE team will get to cleaning this up sometime.
View 5 Replies
View Related
Dec 18, 2010
i set up samba and im trying to acces from windows xp. i can see the drive if i go to run and type the ip adress but when i click on the share i get an error that says "sharename" in this case "sam is not accessible" you might not have permission under this network resource. so how do i give myself permissions. I have followed several tutorials tried different types of set up , restart of samba and what not. but still nothing. I should mentioned that i have been at this for 3 days now and still cant get it to work. i have red hat linux 5.1 and window xp proffesional.
View 5 Replies
View Related
Jun 7, 2010
I would like to create a dedicated Samba print server. I have two printers on my LAN, one printer came with its own NIC and the other is on a Win server box. I would like to setup Samba so that I can just access that server (Samba printer server) and both network printers will show up on there for me to connect to. On that note, can I also load the drivers on my Samba server? Drivers for different Windows flavours and also Mac OSX drivers.
View 1 Replies
View Related
Dec 4, 2010
Still new to Linux and especially samba. I have setup samba for 2 shares, will list below shares. 1 which requires a login and 1 temp folder which I would like guest access to. Currently I have security = user which works great for the data folder which requires a login. If I try to access temp I get asked for a user name and password as well. I tried to set security = share which then allowed access to temp with out a login but also allowed access to the data folder. From the data folder I emoved public = yes. I then get asked for a user name and password like I should but the system will not accept it. This is a Centos 5.5 server with a mail server on it.
[data]
comment = Data Folder
path = /home/data/
public = yes
writable = yes
browseable = yes
printable = no
avaliable = yes
write list = glenn,
force create mode = 0660
force directory mode = 0770
[temp]
comment = temp folder
path = /home/temp/
public = yes
writeable = yes
browseable = yes
guest ok = yes
guest only = yes
guest account = nobody
available = yes
force user = nobody
force group = nobody
View 1 Replies
View Related
Apr 22, 2009
I would like to setup LDAP (openldap) with Samba. I would like to know what should I setup first? Should I setup LDAP before Samba or Samba before LDAP?
View 1 Replies
View Related
Dec 17, 2010
I have setuped OpenLDAP+Samba PDC. When I create user and group -> Errors.
smbldap-group -a admin
No such object at /usr/sbin/smbldap_tools.pm line 457
smbldap-useradd -am -g admin admin
Could not find base dn, to get next uidNumber at /usr/sbin/smbldap_tools.pm line 1192
View 3 Replies
View Related
Jun 20, 2010
I am trying to set up my Ubuntu 10.04 netbook to see my WinXP desktop's files and vice a versa. I followed the steps in this tutorial thread: HOWTO: Setup Samba peer-to-peer with Windows. I got as far as "Time to add yourself as an samba user." at this point I keep getting the following error:
Code:
sudo smbpasswd -L -a WinXP_User_Name
New SMB password:
Retype new SMB password:
Failed to add entry for user WinXP_User_Name.
My WinXP machine has no password.
My conf file is here:
[global]
; General server settings
; netbios name = WinXP_Computer_Name
server string =
; workgroup = WinXP_WorkStation_Name
announce version = 5.0
socket options = TCP_NODELAY IPTOS_LOWDELAY SO_KEEPALIVE SO_RCVBUF=8192 SO_SNDBUF=8192
passdb backend = tdbsam
security = user .....
View 9 Replies
View Related
Aug 22, 2010
I'm trying to setup roaming profiles on our Samba PDC. I've been at it all day, running into a lot of issues with access denied, and going around changing permissions hoping to fix it
The problem seems to have evolved over the day, getting worse. Right now it's an error message on logging in: Windows cannot locate the server copy of your roaming profile.....
DETAIL- The network name cannot be found. In addition, the user does not have access to any shares by default.
The server can be accessed manually and the user can connect to shares. The server can be pinged by the client. The client's user profiles do not get stored or retrieved on logout/in
current smb.conf
# Samba config file created using SWAT
# from UNKNOWN ()
# Date: 2010/08/22 16:34:42
[global]
workgroup = ROSHNI.LOCAL
[Code].....
View 4 Replies
View Related
Nov 11, 2010
I have a removable USB drive formated with NTFS. I enabled all the samba boolians in the SElinux GUI but it still doesn't seem to work. If i put it on permissive it will work. What more is there that i need to do to get my directories to show up on samba with selinux enabled?
View 2 Replies
View Related
Feb 2, 2010
i would like to know how to setup Samba file replication between two Opensuse 10.3 servers,
View 7 Replies
View Related
Apr 15, 2010
I set up a Samba server on my openSuSE 11.2 machine and I can connect to it locally with the local ip and with my actuall ip. My friend however cannot. I tried to have him ping my ip and that wouldn't even work. I'm confused and wondering why it doesn't work. We share a lot of files and this would make both of our lives much easier.
View 9 Replies
View Related
Jun 8, 2010
Is it possible to setup samba to work over IPv6?
View 2 Replies
View Related
May 31, 2011
I am trying to mount a shared folder from windows xp to my ubuntu vm. It is running in vm player.
I installed samba with sudo apt-get smbclient smbfs
Next, I run smbclient -L computer_name_here and get the error NT_STATUS_LOGON_FAILURE. What am I doing wrong? How can I solve this?
View 1 Replies
View Related
