I am getting :
exec of init (/sbin/init) failed!!! : 2
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init! My server is at remote end which I access through Public IP.
I got the following error after compiling kernel version 2.6.38.2 from sources with this Howto:[URL].. Creating root device.
Mounting root filesystem.
mount: could not find filesystem '/dev/root'
Setting up other filesystems.
Setting up new root fs
setuproot: moving /dev failed: No such file or directory
no fstab.sys, mounting internal defaults
[Code]...
I used ubuntu in my ARM board. but now i rebooted it says that "kernel panic - not syncing: Attempted to kill init!" i have to reinstall my OS or any other way to get retify?
View 4 Replies View RelatedOur email server and fax server configured in a Linux server.2day mornin onwards i am getting the error.kernal panic -not syncing : attempted to kill init.
Bootin "powerserver"(Centos-4 i386)-up( 2.6.9-11 EL)
root (hd0,0)
Filesystem type is ext2fs,partition type 0*fd
[code]....
How to resolve "kernel panic not syncing attempted to kill init" problem in Linux?? And why this error occurs? In my case, this error occurs when i boot my computer and after this error my computer goes on rebooting..
View 1 Replies View Relatedam trying to interface ade7758(adc) to at91sam9261...i have written a sample code which registers an spi driver and sends an address to ade7758 and receives a data...every thing is fine.My device is registered but kernel is giving a crash message....below is the message....
[Code]...
Today I was upgrading my netbook with Ubuntu 10.10 on it to 11.04 via the Update Manager. I got a few errors and the Update Manager seemed like it wasn't continuing, so decided to exit it. It didn't respond so after a while I decided to restart the netbook. However the on/off/standby/restart, etc. button in the top right wasn't responding either, so I decided to force a shutdown with the power button on my netbook. Now Ubuntu doesn't start up, and gives me an error along the lines of:
Kernel panic - not syncing: Attempted to kill init! Pid: 1, comm: init Not tainted 2.6.35-28-generic #50-Ubuntu Now could I in some way repair my Ubuntu installation while still keeping the files I already have on my computer? Maybe via booting from a flash drive or something...?
I was unable to access the server and had to reboot it. When the server was booting after the Grub, it errored out withKernal Panic -not syncing Attempted to Kill init!!exec of init (/sbin/init/) failed No such directoryI reboot into the recuse mode from the CD and when looking for the installed OS.I got an error like thisFound OS but with errors.Mounting part or all of your system at /mnt/sysimage.. something of the sort. I've run fsk -y on the /boot and root drives and rebooted but still the same issues.Here is my grub.conf:
# grub.conf generated by anaconda
#
# Note that you do not have to rerun grub after making changes to this file
[code].....
I boot from CD (Tried both debian-506-i386 and the Netinstall) I also tried the flags acpi=off noapic nolapic And when it starts booting the install, it appears: "Kernel panic- not syncing: attempted to kill init"
View 5 Replies View RelatedI recently installed new hard drive and cloned old hard drive software onto it. The bootloader installs either linux or other operating system. Ever since the cloning, boot hangs. Words in the thread title are the last to appear before everything grinds to a halt. Just before the kernal panic message appears, "Initrd finished" is last line. Will have to try booting again to find more info before this.
View 7 Replies View RelatedI Downloaded the 6 CD's of CentOS installation , and I start install them on my machine :
Processor : Intel Pentium 4 -2.08 Ghz
Ram: 256 MB
cash :512kb
HDD: 80GB
(it is for home server purposes)
After the fourth disc the system ask to reboot the system ; so I restart it ok? What I get ? No OS. Just a long text :
I think the bootup run ok, then this line came out I think it reveal some thing that Pros will know it:
nash received SIGSEGV Backtrace :
[0x804fb35]
[0x488420]
[0x.........
[0x........
[0x......]
then
Kernel panic - not syncing: Attempted to kill init!
I just imaged my RHEL 4 system that was running on a Dell Poweredge 2950 server using Acronis software and I restored the image to a VmWare virtual machine.
Dell Poweredge 2950 - RAID 5
VmWare - using ESX 4.0
OS - Red Hat Enterprise Linux 4 ES Update 5 x64
kernel - 2.6.9-55.0.9.ELsmp
I'm getting the following when I try to boot on the new virtual machine. I'm thinking it has to do with the fact that it's new hardware and it's having trouble either finding the right drivers or pointing to the correct place.
"No Volume Groups found
Volume Group "Volgroup00" not found
ERROR: /bin/lvm exited abnormally! (pid505)
mount: error 6 mounting ext3
mount: error 2 mounting none
switchroot: mount failed: 22
umount /initrd/dev failed: 2
Kernel panic - not syncing: Attempted to kill init!"
I was able to boot into Linux rescue mode using the boot CD. Then I typed:
#chroot /mnt/sysimage
Here's all the info from the commands I typed:
#ldd /bin/bash
libtermcap.so.2 => /lib64/libtermcap.so.2
libdl.so.2 => /lib64/libdl.so.2
libc.so.6 => /lib64/tls/libc.so.6
/lib64/ld-linux-x86-64.so.2
#uname -a
Linux localhost.localdomain 2.6.9-89.EL x86_64
#df -h ....
I've tried the following:
1. mkinitrd -v -f /boot/initrd-2.6.9-55.0.9.EL.img 2.6.9-55.0.9.EL
2. modified the device.map to point to /dev/sda3
3. changed the SCSI controller in Vmware to use BusLogic instead of LSI Logic. (didn't work because I'm running 64 bit.. gave me an error message)
4. grub-install --recheck /dev/sda
5. tried booting to differerent OS versions (i.e. 2.6.9-55.0.6, etc.). I tried all of the versions listed in the boot menu.
None of these worked.
-Linux / Ubuntu.
-I am running Windows Vista
I just downloaded Wubi - To install Ubuntu on my computer. (Whether it's called Dual boot or running Ubuntu inside of Windows Vista I do not know.) Everything went fine, got a very easy little screen to ask what partition I wanted to install it on and how much size, etcetera, the download went fine, blablabla.
Problem: It asks me to reboot (This is the first reboot I got.), I say yes, it reboots, I get the booting screen where I get to pick between Windows and Ubuntu, I pick Ubuntu, and it gives me this 'error'.
Among other things it reads:
After this nothing happens - I waited about 25 minutes.
I manually turned off my computer - started it up again - once again chose Ubuntu and the same problem occured.
1. I looked around the Ubuntu folder inside my C a little, it shows the iso file as Ubuntu-10.04.1-desktop-amd64
2. Some other forum advised people with this problem to check their RAM, so I unplugged both, cleaned and switched them. (I have 2 GB ram total.) This didn't work. Same problem still occurs.
I tried to install OpenSuse via LiveCD this morning I got following Error Message: Kernel panic - not syncing:
[code]....
I am using the 32bit-Version of OpenSuse while running this on a 64bit Dualcore. Could that cause the issue?
The first server I installed installed fine. The second server, installed with the same config, went to "kernel panic not syncing no init found try passing init= option in kernel" error. I tried reinstalling but it keeps going to that error after install reboot. The storage is ISCSI connected via Intel Server Adapter, which allows it to boot from ISCSI. Not sure if that's the cause for the problem, but the first server is connected to the same ISCSI and installed just fine.
Is there a way that I can make sure ISCSI module installs during installation? Although I think it is installed since it's able to copy the files and setup /dev/sda. I just wana make sure that it installs during setup.
Im am building a Linux distro. It will be very tiny and fast.
I only have a minimal linuxkernel (bzImage) who is 1,2 mb big. And then I have Busybox who is 174,6 kb big.
The commands in busybox is: cd, ls, mkdir, rmdir, wget, httpd, clear, rm, poweroff, halt, reboot, fdisk, mount, umount, free, and cp.
When I compiled the kernel i use initramfs/initrd function and point it to a folder where initrd/initramfs source is.
The kernel works OK with others initramfs/initrd files. But not with my own.
Quote:
Here is how the end of the kernelcomplie look like.
Quote:
Here is my init file who is the initrd/initramfs source.
Quote:
The initramfs folder contains "bin" (folder) and "init" a file. No more.
The problem is that the kernel cannot find/read init file.
having updated my Debian box, it ceases to boot kernel 2.6.32 with above error. Booting an older kernel (2.6.26) seems to run init without problems.
View 2 Replies View RelatedI recently tried to install php5-gd package on my debian vmware server and it failed at libc6 - i386.
Afterwards every command other than CD caused a Segmentation fault and the server would no long boot, showing the following error
[ 4.808086] init[1]: segfault at 0 ip (null) sp bff4645c error 14 in init[8048000+8000]
[ 4.808372] Kernel panic - not syncing: Attempted to kill init!
[ 4.808442] Pid: 1, comm: init Not tainted 3.2.0-4-686-pae #1 Debian 3.2.65-1
When loading puppy linux on my computer from a CD I get an error message on the third step which is (loading the lup525.sfs mainfile)to ram. kernel panic not synching attempt to kill init. The CD works on other computers with no problems. My computer is a dual boot XP and Win7 machine.
View 3 Replies View RelatedFor a special purpose I needed a initramfs - that didn't work. So I reduced the initramfs setup to the simplest.
Mount the root and switch_root into it. But that didn't work either.
If I go with the init-script for the initramfs I posted below the system prints out the switch_root usage-text from busybox. But the syntax is right, ain't it?
When I use chroot instead of switch_root then it prints the usage-text of init before the kernel panic.
If I try with "/sbin/init 5" then, after a while the system reports "init: timeout opening/writing control channel /dev/initctl".
In the other cases I get the following error messages before the system hangs: "Kernel Panic", "Attempted to kill init", "init not tainted"
(With the init script below there is a error saying:"sh: can't access tty; job control turned off". I know why it's there - but don't know if it is connected to this problem.)
This information may be important:
- The machine boots from a usb-harddisk
- /sbin/init on the new root is available
- the system on newroot is sane and runs perfect standalone (without initramfs)
- the system on newroot uses baselayout-2 with openrc
- busybox is built as static binary
- busybox version is v1.15.3
Here is the relevant data:
My uname -a on that machine:
Code:
Content of the initramfs:
Code:
After update to 5.3 and reboot I got this error. googling for it I found that it is a known bug in kernel REHL 5.3 and there is also a patch for it [URL]. I am very new to linux, so how to apply, or just wait for a new kernel?
View 4 Replies View RelatedI have a situation where there are no logs in /var/log/messages and this has happened the second time during two weeks.
Snapshot of the screen was taken when this happened and the server was restarted. Since it's a time sensitive matter.
Snapshot:[url]
I've just installed for the first time Centos 5.3 on my machine. everything goes in harmony except : 1-when I power off, everything seem to be terminated smoothly but at last I get this annoying error "kernel panic not syncing : fatal exception" 2-my Ethernet card won't get operational; its detected already but when I try to activate it I get this error " eth0 seems not to be present. Initialization delayed"
System Information:
System Manufacturer: Gigabyte Technology Co., Ltd.
System Model: 965P-DS3
BIOS: Award Modular BIOS v6.00PG
Processor: Intel(R) Core(TM)2 CPU 6600 @ 2.40GHz (2 CPUs), ~2.4GHz
[code]...
running Kernel 2.6.9.89 just updated from RHN using up2date...
This server runs for a random 5-30 mins then throws the kernel panic.
I am getting an error when I try to boot my ubuntu 10.4 system (64 bit). Error:Kernel Panic- Not syncing: VFS: Unable to mount root fs on unknown-block(0,0).I installed Sbackup and tried to create a backup of the home, var, usr/local folders. I started the backup and it ran for about 30 minutes then I got a message from the system that indicated that I was out of hard drive space, then the system froze. I restarted the system and then I got the above mentioned error.
View 1 Replies View RelatedI get this Kernel Panic when I start my PC once in a while. After a restart or two it boots normally. I have included a screenshot taken with my camera. Anybody have any idea what this is and how I can get rid of it?
View 6 Replies View RelatedI tried using gparted on a live cd to shrink a windows partition to make room for ubuntu. Then windows failed to boot. I deleted the entire disk and tried to install ubuntu 10.10. It seemed to install fine, but now when I start up I get
[ 0.869364] Kernel panic - not syncing: VFS: Unable to mount root fs on unknown-block(0,0)
and a bunch of other stuff that doesn't look good. I saw some other posts about this error, and people are talking about lilo. I'm not sure what to do
I've been using Linux for a few years, but this is my first time using Fedora. I installed it on an old computer last night and rebooted, and everything seemed good. I let it start to install updates, but after they were about half done I stopped it, turned the computer off, and went to bed. I know that was stupid of me, and I'm afraid it screwed something up because now when I boot I get the error "kernel panic-not syncing VFS:unable to mount root fs on unknown-block(0,0)".
When I looked up the error on Google it seems a lot of people get this after installing a kernel incorrectly, so could stopping the update in the middle perhaps screwed with my kernel? Could I simply chroot into the installation from the live CD and run 'yum install kernel26'?
In my internal disk i had installed 10.04 and 10.10. 2 days ago after a restart my system did not boot and i got the message: kernel panic:not syncing VFS unable to mount root fs on unknown block(0,0).
For 2 days i tried to solve the problem without success and today i installed 10.04 in the entire internal disk but the problem(message above mentioned) remains.
the result of the sudo fdisk -l command is this
Quote:
ubuntu@ubuntu:~$ sudo fdisk -l
Disk /dev/sda: 500.1 GB, 500107862016 bytes
255 heads, 63 sectors/track, 60801 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
sdb is my external hard drive in whick i also had 10.04 installed but never used it.
I tried to upgrade Empathy from 2.28 to 2.30 via Synaptic but the upgrade always failed as there were some errors to do with the dependencies (libglib2.0* and others). The dependency issues were odd as it told me that Empathy wanted to install files that were older than the existing ones. So I decided to uninstall Empathy and all its dependencies, and re-install the whole (updated) package and it's dependencies from scratch via Synaptic. After the install, Ubuntu told me that there were broken packages and Update Manager kept on popping up asking me to run a partial upgrade to fix these broken packages. Well, the partial upgrade also failed (due to the same dependency issues , I suspect) so I decided that I'll run a full system update (as Update Manager had being bugging me prior to my failed Empathy upgrade). 486 Mb later, Ubuntu no longer wants to boot - it freezes on the splash screen.
When I start it in recovery mode, it spews out the various processes being loaded. Trying to run earlier kernels (2.6.31-19 / 17 / 14) from GRUB, in both normal mode and recovery mode does not seem to help.I am running Ubuntu 9.10, kernel 2.6.31-20-generic.
a) Is the problem to do with the kernel - did the update try to update the kernel as I note that there is a new stable release (2.6.33-2)? However, GRUB still indicates that the kernel is 2.6.31-20.
b) Would updating the kernel to 2.6.33-2 help? If so, how do I do this?
c) Is the problem, as I suspect, to do with the libglib* files? If so, how do I fix it?