Ever since I've updated to 5.3 i get following error trying to update with yum :
[root@athena ~]# yum update
Loaded plugins: fastestmirror, priorities
Loading mirror speeds from cached hostfile[code].....
After making many updates via pup, including FreeNX, my FreeNX installation has broken. It worked flawlessly before the update. Now when I try to connect my client connects, I see the NoMachine splash screen and then I lose the connection with the following details:
Info: Display running with pid '3404' and handler '0x1a037e'.
NXPROXY - Version 3.1.0
Copyright (C) 2001, 2007 NoMachine.[code]......
I have created aprtition calls /dev/sdd4 and used mount comand I changed /etc/fstab added the new partition to that file as recomanded on http://www.cyberciti.biz/faq/linux-disk-format/
Now when I reboot my pc I get an error message
( fsck.ext3: No such file or directory while trying to open /dev/sdd2 [failed]
An error occurred during the file system check. Dropping you to a shell; the systme will reboot when you leave the shell.
Give root password for maintenance (or type Cntrol-D to continue) )
When I type the root password it is on read-only I cant chage any file.
Servlet were working. The next to last yum upgrade broke servlet.
I now get a error 404
Object not found!
The requested URL was not found on this server. If you entered the URL manually please check your spelling and try again.
I have not been able to find any docs on how
/usr/share/java/tomcat5-jsp-2.0-api.jar
or
/usr/share/java/tomcat5-servlet-2.4-api.jar
are connected to apache httpd.
use to be mod_jserv
then a tomcat.conf
but can't find on centos distro.
I have a RPS (server with iscsi storage) that worked fine ! I yum updated it yesterday in order to upgrade it to 5.6.
After upgrading, the server can't reboot at all ! I can't find anything in logs
When i boot it via a kvm, the load screen says :
kernel panic - not syncinc : VFS : Unable to mounr root fs on unknown-block (2,0)
Pid: 1, comm: swapper Not tainted 2.6.34.6-xxxx-std-ipv6-32 #3
My kernel is on a netboot, it is 2.6.32, and i work on an ip failover.
The ipfailover continues to ping, but not the 'true' ip adresse
I assume it is a iscsi bug, but i don't know how to fix it. Or maybe it is something else.
screenshot here : [URL]
[Moderator edit: Insert link with img tags.]
After updating and installing Mysql's TOP, yum broke. When trying to clean, update, or install, the following error occurs:
dingle@its:/home/dingle# yum update
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named cElementTree
Please install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.4.3 (#1, Sep 3 2009, 15:37:12)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-46)]
If you cannot solve this problem yourself, please go to the yum faq at: [URL]
I tried to resolve by reinstalling the dependency, didn't work either:
dingle@its:/home/dingle# rpm - [URL]
Retrieving [URL]
Preparing... ########################################### [100%]
package python-elementtree-1.2.6-7.el4.rf.i386 (which is newer than python-elementtree-1.2.6-5.i386) is already installed
How can I rebuild YUM appropriately so it will operate correctly?
I'm trying to recover my rpmdb after canceling the installation of a package (dumb, I know). After clearing /var/lib/rpm/__db* and running rpm -vv --rebuilddb I still get an error error: cannot open Packages index using db3 - Invalid argument (22). What should be my next step?
View 7 Replies View RelatedAfter installing the latest updates (the second round of updates since the upgrade from CentOS 5.5 to 5.6), Evolution mail barely works on my KDE desktop.After I do manage to get it running, then exit the program and log out, bonobo-activation-server and a couple of evolution process invariably continue running, and must be killed manually.The program generally does not start at all using the desktop program icons. If I make sure bonobo and all evolution processes are dead, I can generally get it started using the command line, but it complains with this error message:
[edfix@eagle ~]$ evolution --component=mail
** (evolution:6324): DEBUG: mailto URL command: evolution --component=mail %s
** (evolution:6324): DEBUG: mailto URL program: evolution
libnm_glib_nm_state_cb: dbus returned an error.
(org.freedesktop.DBus.Error.ServiceUnknown) The name org.freedesktop.NetworkManager was not provided by any .service files
I tried reverting to the previous kernel (2.6.18-238.5.1.el5), but no improvement. System data is at [URL]
I am running CentOS 5.6 on my servers (auto-updating to the latest patches). A couple of days ago, a number of updates were applied:
glibc-common-2.5-58.el5_6.4.x86_64
glibc-2.5-58.el5_6.4.x86_64
nscd-2.5-58.el5_6.4.x86_64
glibc-headers-2.5-58.el5_6.4.x86_64
[Code]...
This update broke a software tool from Xilinx (FPGA compiler). I rolled back all of the above, to 2.5-58.el5_6.3, and the tool works OK. I get:
/home/cad/xilinx/ISE13.1/ISE_DS/ISE/bin/lin64/unwrapped/map: symbol lookup error: /home/cad/xilinx/ISE13.1/ISE_DS/ISE/lib/lin64/libXst2_Core.so: undefined symbol: _ZN5boost7archive6detail17basic_oserializerD2Evmake[2]: *** [map] Error 127
Until recently the secure log was working as expected, then suddenly it has stopped logging. No changes made that I'm aware of, though automatic updates via yum are occurring. I'm assuming this is all logged through klogd, which is running.
Not overly familiar with Linux logging, where should I be looking for problems?
My server's manufaturer (supermicro) only provides RAID drivers for certain RHEL (CentOS) releases, 4.4, 5.2 and 5.9 are presently available. An accidental yum update recently took the server from CentOS 4.4 to 4.7, and abandoned the RAID driver. My choces are to reload 4.4 or go to 5.2. Since I will probably do the latter, is there a way to have yum just update within the distro, and not the distro version? Can someone ID the rpms I could exclude to be sure that the OS version remains static?
View 3 Replies View Relatedway of updating only the security packages on CentOS?
If I do a yum update. It updates everything and creates a new version which will unnecessarily uses space along with the old version. I don't want this to happen. way of updating only the security packages and keeping my old version of CentOS?
Is it possible to set a package in such a way that it will not update when "yum update" is executed?
View 1 Replies View RelatedI have an error message at updating centos 5 x64.
View 3 Replies View RelatedI have been told by the staff from supermicro to update my BIOS, but they only have .exe to update. I ask them if they can help me to update my bios from Centos, and this is what they said
You can use RHEL driver: [URL] use same kernel driver for CentOS as RHEL. I'm really new with Centos OS, can you guide me on how would I be able to update my software via RHEL Driver? I see alot of RPM and images.
I have just downloaded CentOS 5.3. The kernel version is 2.6.18.xx However, when I updated the kernel version has not changed. Still 2.6.18. Unless something went wrong with the updates. The most up to date kernel is 2.6.31.xx I was thinking shouldn't it update to this new kernel? On my Fedora 12 I have 2.6.31. However, I thought the kernel of 2.6.18 would have been updated as least a little.
View 4 Replies View RelatedSo i have a small home server i need to setup. I used to have arch linux installed, but i found it unstable and more difficult to maintain. So i heard about the stability if CentOS and decided to try it out. I got samba setup no problem, but cups i cannot get to work. The orinter driver for my epson workforce 500 requires lsb 3.2 whereas lsb installed in centos is only 3.1. What can i do to fix this? Should i just go with fedora instead?
View 8 Replies View RelatedI did an easy apache update and ever since have been getting an error about the Zend engine...
Quote:
Zend Guard Loader requires Zend Engine API version 220090626.
The Zend Engine API version 220060519 which is installed, is outdated.
I have searched for answers on how to update the Zend engine, but can not find much at all and wondered if anyone here has encountered a similar message and knows what I might do.
My system details are
Apache 2.2.18
CENTOS 5.6 x86_64
cPanel/WHM
PHP 5.3.6
Zend Optimizer/Guard Loader for PHP
3.3.9 -
I've been working at creating a highly available set of host servers for a linux diskless boot cluster.Each host machine is fitted with redundant power supplies and two 1TB drives in a Raid-1 configuration.When I first started this project they each had twin 160GB drives. In my original setup I had both nodes acting as primary systems so that I could mount /dev/drbd0 to my /data directory and see changes immediately.It had worked in the past where I could make a file in /data on the first machine and it would show up in the /data directory on the second machine. One day this had stopped working where if I made a file on the first machine it would display on the second one until I unmounted /data and remounted it to the /dev/drbd0 disk.
This is when I bought the new disks and decided to start from scratch. The weird thing is that if I make a file on the primary and remount on the secondary to see it and then delete it from the secondary and THEN delete it on the primary, the primary throws no error however it goes into read-only mode because it knows that file was already gone.Below is my configuration file, sda8 is an 820GB partition which is used for all of the data I want to replicate, currently populated with ~10GB of data. Sda7 is my metadisk partition which is 500MB large clearly more than needed by drbd.Also you will notice "incon-degr-cmd "halt -f";" is commented out. This is because when I go to actually use it drbd throws an error when reloading the configuration and I'm not sure why that is either
resource r0 {
protocol C;
#incon-degr-cmd "halt -f";
[code]....
I have CentOS 5.4 installed with lighty and MySQL installed via yum. not a problem. The issue become when I'm having problem with the current mysql that I installed via yum which I believe its currently at version 5.1.42-2. So I'd like to upgrade it to the latest available version of mysql. Except I can't figure out whether to download the generic glibc32 version or just get the RHEL5 version or find the mysql enterprise version somewhere. So, not knowing what I'm doing, I downloaded the RHEL5 version since it's closer to CentOS 5.4. Except for whatever reason the mysqli is not installed or configured properly and I'm not sure how to fix it.
Any suggestion? Everything was working nicely when I used yum to install, except the problem with the version of mysql that's offered in the repository. So I'd like to request a suggestion on how to either somehow upgrade mysql using yum and there's a different repository that I didn't know, or perhaps download a proper latest and greatest mysql, install and have it configured so that mysqli work properly.
I updated my system to the latest version - 5.5. After that I could not install VirtualBox. I was thinking, trying to fix, googling... it over for hours... Finally I found the reason. VirtualBox installer searches for the source kernel at /lib/modules/2.6.18-194.17.4.el5/build, and it can not. Look into /lib/modules, I have some kernels such as:
- 2.6.18-194.17.4.el5
- 2.6.18-194.17.4.el5debug
- 2.6.18-194.17.4.el5xen
... and more old ones.
At that time, I booted on 2.6.18-194.17.4.el5 kernel. But inside that directory, there is no build or source (directory/ file). Then I looked into 2.6.18-194.17.4.el5debug, and it had. So I typed: ln -s /lib/modules/2.6.18-194.17.4.el5debug/build /lib/modules/2.6.18-194.17.4.el5/build
I am running CentOS release 5.3 (Final)
kernel: CentOS (2.6.18-53.1.13.el5)
After updating to the version: CentOS (2.6.18-164.el5), the server is not stable and i have got a lot of this kind error:
Sep 19 02:08:36 server kernel: EXT3-fs error (device sda8): ext3_lookup: unlinked inode 3372068 in dir #5148223
Sep 19 02:08:36 server kernel: Aborting journal on device sda8.
Sep 19 02:08:36 server kernel: EXT3-fs error (device sda8): ext3_lookup: unlinked inode 3372071 in dir #5148223[code].....
When I select package updater for update software it gives an error I am attached my system information & error file.
Error message:-
file /usr/share/emacs/site-lisp/psvn.el from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386
file /usr/share/locale/de/LC_MESSAGES/subversion.mo from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386
file /usr/share/locale/es/LC_MESSAGES/subversion.mo from install of subversion-1.6.12-0.1.el5.rf.x86_64 conflicts with file from package subversion-1.4.2-4.el5_3.1.i386 .....
After trying to upgrade to PHP53u on Centos 5.6 using the instruction here: [url], I've run into trouble.
I have 3 issues that I have identified so far:
1) After the upgrade I go this message:
2) This message when trying to access the site: Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
3) Cannot access my Parallels panel on port 8443.
I am trying to run yum update on my CentOS 5.3 server, 32-bit, but it responds with the following:
Quote:Running rpm_check_debug
ERROR with rpm_check_debug vs depsolve:
memcached is needed by (installed) memcached-selinux-1.2.8-1.el5.i386
Complete (1, [u'Please report this error in [URL]...
I have a 3dsp pci wifi card, and the last kernel it supports is Ubuntu 10.04 2.6.32-(21-24) I want to update but dont want to accidentally update the kernal.
View 3 Replies View RelatedI just upgraded from Fedora 14 to 15. First thing that I want to say is, "Wow, this looks great." It's such an innovative, slick, modern interface. I'm very impressed. The Gnome developers did a very good job on Gnome 3 and Fedora folks did a great job with the integration into the latest Fedora distribution. I did run into a problem, though. I'm still a little bit green in the Linux world, so please bear with me. When I upgraded with preupgrade, yum came back with repository errors. I think that the problem stems from the fact that I installed firefox4 in Fedora 14 according to the instructions on the fedoraproject.org wiki [URL]. Now I have two copies of Firefox 4 installed (after the upgrade) and I'm unable to remove the extra one (yum remove firefox4 gives bupkis ). What's worse, yum doesn't work for anything else, either . I tried a "yum clean all" but that didn't fix it. I think that I need to remove the firefox4 instance of Firefox, and then remove the repository from my repo list (I think), but I'm not sure how to do that.
View 4 Replies View RelatedI just downloaded the most recent version of the updates for Ubuntu 9.10 and for the 4th or 5th time since I've used 9.10 it's broken 9.10 so I can't boot. Usually after breaking it it just hangs at the screen between the big white ubuntu O and the next with the progress bar, this time after the big white O I get random multicolored characters at the top of the screen and the computer hangs with no activity, no hdd lights or anything. Unless anyone has any suggestions I'm just not going to use Ubuntu, at least until 10.04 is available this is really getting old.
View 8 Replies View RelatedI have a pseudo test server that I irresponsibly let both a need for develop and running of Sid (unstable) version of Debian.
The long story short of it is I was playing around with functions that needed newer versions of software than was available in the stable release so upgraded. That was a done deal and has been working fine for many months. I then needed to upgrade a particular file for an unrelated service and did the dumb move of a full apt-get upgrade. Well in the 800 or so files it updated, one of them has broken Apache.
Apache will start from the command line (/etc/init.d/apache2 start) without any errors, but when I try to navigate to any page it serves I get "500 Internal Server Error".
Looking at the error log I see:
Code:
[Wed Sep 23 11:02:28 2009] [notice] Apache/2.2.13 (Debian) DAV/2 PHP/5.2.11-1 with Suhosin-Patch mod_ssl/2.2.13 OpenSSL/0.9.8k configured -- resuming normal operations
[Wed Sep 23 11:02:31 2009] [error] [client 192.168.1.1] SoftException in Application.cpp:221: File "/Forum//index.php" is not in document root of Vhost "/var/www/phpBB3"
[Code].....
I have Fedora 12 x86_64 running the nvidia drivers from rpmfusion. I set them up using the howto's from rpmfusion and the good people here. I also run KDE as my desktop and try to keep gnome stuff to a minimum. Everything has been running fine, including the opening splash graphics.
I run updates today, and installed the update for KDE 4.3.4. The next time I booted, the startup animation ran, but hung once it finished. I know the system didn't totally crash because I was able to give it a three-finger salute and it rebooted. The next boot I set my startup parameters to disable the plymouth splash screen, and everything started up fine.