CentOS 5 :: Evolution Broke By Latest Yum Update?
Apr 16, 2011
After installing the latest updates (the second round of updates since the upgrade from CentOS 5.5 to 5.6), Evolution mail barely works on my KDE desktop.After I do manage to get it running, then exit the program and log out, bonobo-activation-server and a couple of evolution process invariably continue running, and must be killed manually.The program generally does not start at all using the desktop program icons. If I make sure bonobo and all evolution processes are dead, I can generally get it started using the command line, but it complains with this error message:
[edfix@eagle ~]$ evolution --component=mail
** (evolution:6324): DEBUG: mailto URL command: evolution --component=mail %s
** (evolution:6324): DEBUG: mailto URL program: evolution
libnm_glib_nm_state_cb: dbus returned an error.
(org.freedesktop.DBus.Error.ServiceUnknown) The name org.freedesktop.NetworkManager was not provided by any .service files
I tried reverting to the previous kernel (2.6.18-238.5.1.el5), but no improvement. System data is at [URL]
View 5 Replies
ADVERTISEMENT
Dec 1, 2010
I installed a whole mess of updates yesterday, and when I booted into Ubuntu today, my desktop looked off. I could only use the upper 80% of my display, while Docky had decided to completely take over the bottom portion. Killing Docky brought my display back to full size. However, any scrolling or window movement was very jerky. I double checked my appearance preferences, only to find out that I had been 'downgraded' from 'normal' to 'none'. I attempted to go back to my original settings. First, I was told that the Appearance Manager was searching for available drivers. After flashing through all of my open windows, I was told 'Desktop effects could not be enabled'. A bit of searching discovered that people have had problems with compiz in the past. I downloaded compiz-check, and ran it, only to be shown the following:
Quote:
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Radeon HD 2400 XT
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia)
So, something in my updates broke my graphics rendering. Unfortunately, I don't know how to force Ubuntu to tell me what was updated yesterday. If I could do so, is there a way to revert to the previous version, so I could run the updates one at a time until I figured out what went wrong?
View 1 Replies
View Related
May 4, 2011
I have a RPS (server with iscsi storage) that worked fine ! I yum updated it yesterday in order to upgrade it to 5.6.
After upgrading, the server can't reboot at all ! I can't find anything in logs
When i boot it via a kvm, the load screen says :
kernel panic - not syncinc : VFS : Unable to mounr root fs on unknown-block (2,0)
Pid: 1, comm: swapper Not tainted 2.6.34.6-xxxx-std-ipv6-32 #3
My kernel is on a netboot, it is 2.6.32, and i work on an ip failover.
The ipfailover continues to ping, but not the 'true' ip adresse
I assume it is a iscsi bug, but i don't know how to fix it. Or maybe it is something else.
screenshot here : [URL]
[Moderator edit: Insert link with img tags.]
View 8 Replies
View Related
Nov 28, 2009
After updating and installing Mysql's TOP, yum broke. When trying to clean, update, or install, the following error occurs:
dingle@its:/home/dingle# yum update
There was a problem importing one of the Python modules required to run yum. The error leading to this problem was: No module named cElementTree
Please install a package which provides this module, or verify that the module is installed correctly.
It's possible that the above module doesn't match the current version of Python, which is:
2.4.3 (#1, Sep 3 2009, 15:37:12)
[GCC 4.1.2 20080704 (Red Hat 4.1.2-46)]
If you cannot solve this problem yourself, please go to the yum faq at: [URL]
I tried to resolve by reinstalling the dependency, didn't work either:
dingle@its:/home/dingle# rpm - [URL]
Retrieving [URL]
Preparing... ########################################### [100%]
package python-elementtree-1.2.6-7.el4.rf.i386 (which is newer than python-elementtree-1.2.6-5.i386) is already installed
How can I rebuild YUM appropriately so it will operate correctly?
View 1 Replies
View Related
Jun 30, 2011
I am running CentOS 5.6 on my servers (auto-updating to the latest patches). A couple of days ago, a number of updates were applied:
glibc-common-2.5-58.el5_6.4.x86_64
glibc-2.5-58.el5_6.4.x86_64
nscd-2.5-58.el5_6.4.x86_64
glibc-headers-2.5-58.el5_6.4.x86_64
[Code]...
This update broke a software tool from Xilinx (FPGA compiler). I rolled back all of the above, to 2.5-58.el5_6.3, and the tool works OK. I get:
/home/cad/xilinx/ISE13.1/ISE_DS/ISE/bin/lin64/unwrapped/map: symbol lookup error: /home/cad/xilinx/ISE13.1/ISE_DS/ISE/lib/lin64/libXst2_Core.so: undefined symbol: _ZN5boost7archive6detail17basic_oserializerD2Evmake[2]: *** [map] Error 127
View 1 Replies
View Related
Jan 29, 2011
How to update pacemaker to the latest version 1.1.4?
View 2 Replies
View Related
Nov 30, 2010
I*had an update today and, since, Flash full screen is jerky and the sound comes as through a PVC*pipe.nybody has this problem?How do I find the updates that arrived today?*Is it possible to revert to a precedent version?
View 2 Replies
View Related
Feb 2, 2011
After applying the 31st Jan and 1st Feb updates to -current (32 bit), alt-tab to switch between windows is no longer working in kde. It seems to lock the desktop and then after a few seconds kde goes back to the login screen. If I disable all desktop effects then alt-tab works again.
View 10 Replies
View Related
Mar 17, 2010
I just did the latest upgrade in 9.10 via the update manager and it required a reboot. When I rebooted Ubuntu failed to load. In recovery mode it fails saying that it can't find my root device and has some suggestions about what might be wrong. I looked at the file it listed in /proc/something and the devices available by uuid in /dev/ and what's listed in /proc/something isn't in dev. I haven't made any changes yet for fear of causing worse damage. The shell it bumps to is ASH and it doesn't look to have much editor support to make changes to the proc file(ECHO > ?). Is there a safer way to get my system back online?
I'm running 9.10 AMD64 on a Dell Inspiron laptop with a dual boot to Windows 7 (For browser testing web apps/sites)
View 9 Replies
View Related
Sep 15, 2010
Where's the recovery console in 10.04? Apparently there's no Grub so holding escape to get to a boot menu to boot into a shell isn't an option for me it seems.
I just want a shell so I can remove lm-sensors or whatever package I installed that's made my system unboobatble.
View 2 Replies
View Related
Nov 25, 2010
My server started to throw the following errors at me:
Quote:Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Uhhuh. NMI received for unknown reason 2d.
Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Do you have a strange power saving mode enabled?
Message from syslogd@ at Wed Nov 24 22:17:13 2010 ... server kernel: Dazed and confused, but trying to continue
View 3 Replies
View Related
Jul 18, 2010
I'm testing out Ubuntu 10.4 LTS, I'd like to upgrade my evolution 2.28 to the latest 2.8
View 1 Replies
View Related
May 20, 2011
I want to upgrade my current evolution (2.30.3) with the latest stable release (2.32.2). How can I do it? Is there any PPA for that?
I am using Maverick.
View 5 Replies
View Related
Sep 30, 2010
As the title says i updated my system which then needed a reboot. I also installed Mixxx djing software to try it out. So i thought id just restart the system. Usually when i boot into my desktop wireless automatically can connect to my router but not this time, wired only for now... i know theres tons of wireless issue threads but some more experienced users will be able to get straight to the point and run through some diagnostics with me.
View 1 Replies
View Related
May 2, 2011
I am having an issue with phpMyAdmin on my Xubuntu machine. I installed a few updates today and now my phpMyAdmin web interface site is not loading on the server. This is a local server running in my office. It appears that the page tries to load, but no output is delivered to the screen.
Taking a closer look at my updates, it looks like the following changes were made (along with some upgrades to Firefox):
When I use the 'Force Version....' command, I am given only two options the '4.8' version that I have now (the broken one) and a flat '4' version with no .7. Also, the force version didn't seem to do anything. I tried to Force a version and then mark a package for reinstall. When I did this Synaptic informed me that it was simply going to reinstall the 4.8 version.
What I would like to do is to revert to the 5.3.2-1ubuntu4.7 version of all of these files and then lock the version using Synaptic, to prevent this issue from recurring.
I am not afraid of heading to the command line either.
System Information:
32-Bit Xubuntu 10.04 LTS install
Athlon 3800+
2GB Ram
View 1 Replies
View Related
Dec 17, 2009
I ran a yum update a couple days ago, and it completed without error. Today I tried logging into Wordpress, and was unable to do so. I get a 403 error. Further investigation shows that I can no longer run any php scripts for Wordpress or Gallery. A look through yum log shows the following packages were installed:
Dec 13 11:22:52 Updated: mysql-libs.i386 5.0.88-1.fc10
Dec 13 11:23:57 Updated: qt-mysql.i386 1:4.5.3-9.fc10
Dec 13 11:37:40 Updated: mysql.i386 5.0.88-1.fc10
Dec 13 11:37:47 Updated: mysql-server.i386 5.0.88-1.fc10
There were no updates to apache, php, or SElinux, so I am at a loss to explain why apache is no longer able to run php scripts.
View 1 Replies
View Related
Jan 3, 2011
I just ran yum update, which installed about 47 packages. When I try to restart, the Linux boot loader is not being read. Apparently, the old Windows 7 boot loader that came installed on this machine is still somewhat intact on the hard drive, because when it boots, it tries to start Windows. I put in a Red Hat 5 rescue disk...but the rescue disk can't find a Linux file system on my hard drive.
Fedora 13
Dell Latitude E6500
Also...the disk is encrypted.
(Not the swap or /boot)
View 1 Replies
View Related
Jan 9, 2010
I just updated to emacs23 from emacs22 (sudo apt-get install emacs2). I find that I now have a problem with org mode structured lists not appearing. A single asteriks on a line by itself no longer appears highlighted and no longer collapses and expands using the tab key.
View 2 Replies
View Related
Feb 6, 2010
i upgraded my kernel to the latest version that being linux-image-2.6.31-19 and now when i start my linux box i get the grub shell. this problem happend once before but i only had to run the command: sudo update-grub2 and everything turned back normal. now even though i run the command everytime i restart my linux i get the grub shell.
View 5 Replies
View Related
Feb 7, 2010
Firstly my gdesklets have gone, and if I try to run gdesklets then I get a blank window in the top left corner, followed by another blank window in the centre which disappears, then the first one fades to gray.
Secondly, clicking the 'running man' to exit just closes both gnome panels.
Ubuntu 8.04 (2.6.24-25)I know 8.04 is pretty old now, and I should probably start over, but it was all fine until this latest update.
View 1 Replies
View Related
Jul 10, 2010
After upgrading to 1.2-rc7, sound stopped working in WoW. Switching between OSS and alsa has no effect.
Others are having this issue: [URL]
Is there any easy way for me to downgrade to the last version? Hate to have to install from source.
View 1 Replies
View Related
Nov 25, 2010
Posting from my Windows 7 system. Once again an Ubuntu kernel update has broken X. Once again I cannot get into Grub2, despite putting in the hacks to lengthen the time it listens. I don't need instructions on how to fix it from Live CD. I'm going to try Gentoo or something, anything, different. I need a Linux distro that can survive regular updates and boot to desktop reliably.
View 1 Replies
View Related
Jan 29, 2011
I am running Ubuntu 10.04 and ran the normal weekly updates last night. There were kernal updates listed but they have run alright before so I went ahead and let everything update.
On restart my Nvidia drivers would not load, so I restarted in low graphics mode. I uninstalled the Nvidia driver (with the intent of reinstalling them) but decided to restart before I reinstalled the driver (windows habit). upon restart I was told (in a very small box) that Ubuntu was running in low graphics mode.
I clicked ok and it proceeded to load, but it loaded it in regular mode and only the right half of the desktop is visible! It is like it is cut totally in half! And I can't get to the important side with Admin and Preferences. I tried boot options but that just gets me a very small colored box. There are no options when it boots just 3/4 of a box that says it is running in low graphics mode because "unable to load module "fglrx" module does not exist". I can not try and reinstall the Nvidia drivers because I can't see the part of the desktop that has Admin on it. I have used Ubuntu for several years now but have not used the terminal very often.
View 9 Replies
View Related
Mar 25, 2011
I did the latest update last might, 3-24-11, and I woke up,to find my system completly broken. There is some weird new startup and nothing starts, absolutly nothing. I'm typing from my phone now. I'll try some troubleshooting soon but I may just reinstall.
View 1 Replies
View Related
Sep 25, 2010
When I try to update the latest from Update Manager I get this message:
Please insert the disk labeled: Ubuntu 10.04.1 LTS _Lucid Lynx_ - Release i386 (20100816.1) in drive /cdrom/
I'm running 9.10. I don't know why I'm getting this message, does anyone here know why this is happening?
View 3 Replies
View Related
Dec 26, 2009
My GMA500 (poulsbo) driver is not working any more because of the latest update I made using Software Update.
The update was a new kernel:
[omass@omass ~]$ uname -a
Linux omass 2.6.30.10-105.fc11.i586 #1 SMP Thu Dec 24 16:26:26 UTC 2009 i686 i686 i386 GNU/Linux
Now, after this update, when I reboot I get the following error code...
View 3 Replies
View Related
Feb 5, 2010
I ran the automatic update today and it requested a restart afterwards. After the restart, I don't have any icons on my desktop, can't open windows other than the terminal. If I try to run software from the terminal, I get the following error.
/lib/libgcc_s.so.1: version 'GCC_4.2.0' not found (required by /usr/lib/libstdc++.so.6)
/lib/libgcc_s.so.1: version 'GCC_3.3' not found (required by /usr/lib/libstdc++.so.6)
I have seen "just removed the library with an issue" or recreate the links or try to reinstall. I am running fedora 12.
View 2 Replies
View Related
Feb 12, 2010
Wednesday I went to work, docked and fired up my older Dell C840 laptop (running Fedora 12). It had a long list of updates that it downloaded and installed (it had been off for about a week). When the updates were finished, I noticed that my laptop had locked up. After waiting a while, I ended up doing a cold reboot. After that, I get the Fedora symbol that fills up, and then the screen goes black with a single cursor. You can type in anything and it is reflected- even control and ALT codes. If you hit CTL- ALT-F2, it goes into a terminal mode. You can do almost anything that you'd normally do in terminal mode. The video driver is the original off the install disk, and it's never been changed- it works fine right out of the box.
If I try to start up X-Windows, I get a segmentation fault error. I've tried deleting and then re-installing some of the packages that were updated (trying this via yum), no difference. I don't know what else to do. I need to get this laptop going before next week- it's my work computer and I do use it a lot. Is there any way to get in touch with the people who wrote the updates, and file a bug report? I'm using my main (home) system right now, that for a couple of reasons needs to stay on windoze XP for a few more weeks. I've been around computers for years, but not Linux.
View 1 Replies
View Related
Nov 6, 2010
I have 11.1 on a computer. I updated it yesterday. Now K3B, VLC, and XDVDShrink are all broken. Possibly other programs broken as well. VLC refuses to uninstall via Yast. These are high-priority programs for this computer. Multiple people use this computer for multimedia and there is not much to entertain ourselves with in our very cold climate. In other words, it is mandatory that K3B, VLC and XDVDShrink return to operational status.
Should I just upgrade to 11.3, try to fix the broken 11.1? I prefer using KDE3, not KDE4, but I can sacrifice.
View 1 Replies
View Related
Jan 11, 2010
I just did install the updates as they showed up with the Update manager, and now the themes are "broken." On startup, all windows are themed with the Redmond theme. When I open the Appearance dialog, some windows' theme come back. But nautilus still uses the Redmond theme (I'm not running it as root either). The icon theme is totally not taking effect. It's using the ugly gray icons regardless of what I have chosen. This all happened right after the latest update on Karmic, and after I've reinstalled my NVidia driver which breaks after every kernel update. I think it was a kernel update because the number of lines at the grub menu seemed to have increased.
View 2 Replies
View Related
