Hey when I start my CentOS 5.5 Final I always get this error on startup
/etc/rc.3/S95saslauthd: line 31: test : too many arguments
when I shutdown I get the same thing but /etc/rc.0/S95saslauthd: line 31: test: too many arguments
I would like to use emerald on oracle linux 5. I prefer this forum so I migrated to here! In fact, I already managed to import some themes in emerald, and to apply them, but after a reboot there was an error message (I don't remember it but I can retry to boot if you want), and my new emerald theme was not loaded, instead I had the default one, and when I launched emerald I wasn't able to import a new theme, there was no theme in the emerald window. so I tried to import one with the file manager by clicking on the "import" button, but in my home folder (/home/olivier) I had ... nothing : no file, no directory, yet there are still on the disk, I verified.
this seems an error of rights, but I don't know what to do. I must also specify that I have not already put "fusion-icon" in the list of the applications to launch at the startup, so I have to launch it after the boot (and it's what I did after the boot I spoke about above. I don't remember if I launched fusion-icon as "root" or "olivier"...
I was installing last night some applications , then i forgot to plugin my laptop so suddenly it turned off , anyways today i turned it on , while booting it gave me this error : "error where found when mounting the disk file /"so i press I to ignore , and it works , but now how can i fix this error?
View 1 Replies View RelatedI'm having a problem with GDM very similar to the one described in the thread below, though they did not find a solution.
[URL]
Basically when I boot the machine I first see the terminal login, then after a moment I get what looks like some graphical corruption followed by GDM appearing.
I've already attempted reinstalling GNOME and X, then manually reinstalling GDM, but none have solved the problem. I'm currently in the process of enabling boot logging as described in the thread, so I'll post that soon.
I have CentOS 5.5 with no GUI. How do I enable commands/scripts to run on startup when the server is rebooted?
View 2 Replies View RelatedI've run into this problem this week. The other night a power supply failed on a different system and appears to have surged the UPS which it and some other computers were plugged in to. One computer was fine, but the RAID server that is used for backups ended up with a bad disk and this "Disabling IRQ #169" message now shows up during boot, right after starting udev and setting the hostname. The system then sits there for 3-5 minutes before repeating a scroll of "/etc/rc.d/rc.sysinit: line 966: /bin/usleep: Input/output error"
I have booted with linux recovery from the CentOS DVD in order to replace the drive that was damaged. I rebuilt the raid array and all the data seems to be fine. There is another message though after "Red Hat nash version 5.1....." no raid disks and with names: "isw_bf jihdchhi_Hostname" failed to stat() /dev/mapper/isw_bf jihdchhi_Hostname
I was considering doing a complete reinstall of CentOS but if there is another solution I would much appreciate it, is it perhaps an issue with Grub not being able to find the updated array? As it is, it is impossible to boot the system except for using a live CD to do it.
I have placed a script I would like to run on starup in /etc/init.d and created symbolic links to that file in /etc/rc3.d and /etc/rc5.d but it doesn't run on startup.Is there something else I need to do to get this to work?
View 13 Replies View RelatedI put one script in /etc/init.d/abc.sh. Now I want it to run at startup.
How can I do that with chkconfig?
chkconfig --add abc.sh
But I am not sure how it works.
This system has been centos 5.2, 5.3 and now after an update ( through yum ) to 5.4 i can't get to the startup screen. System was a barebones kit with ASUS P5Q-E motherboard, WD-500gb sata, Intel Processor
After the update I get:
BIOS Bug MCFG area at e0000000 is not E820-reserved
NOT Using MMCONFIG
I get to the part that says: press "i" for interactive startup ... starting "udev", then nothing. Just black screen. I followed other recommendations and loaded the lastest BIOS onto the motherboard, but the issue still persists. I'm also not able to boot any of the older kernels through the grub menu. Not sure where to go from here since I can't boot into anything.
i use centos 5.4 with kde and i want to use synergy at kde-logon screen.i 've modify Xsetup and Xstartup Files but synergy wont activated.In which files does need to be modified?
View 1 Replies View RelatedAfter reviewing the dmesg log, I realize that it does not log all startup messages. Is there a way to configure it or another log to do so?
View 7 Replies View Relatedi want to start firefox on startup of my os.so i tried these commands:
ln -s /usr/lib/firefox-3.0.18/firefox /etc/init.d/firefox
ln -s /etc/init.d/firefox /etc/rc5.d/S99firefox
and then i restarted my pc i nothing happened.what should i do ?
Ok, i'm sure this is really basic and it's probably been posted before but I have searched and can't find anything.
Long time linux user, first time with centOS
I am building a basic firewall system with ssh acces only, I only occasionally need gui/gnome access so I have sent my init level to init 3 in /etc/inittab.
My problem is during startup the screen wants to run the gui startup and for some reason the driver isn't quite right so it flashes the screen every time it starts a process and says [OK] because of this I miss 90% of the startup information.
I have already disabled the splash screen in /boot/grub/grub.conf and that did disable the grub splash screen but how can I disable the "centOS" spash stuff? I only want txt at startup, I don't want the system to do anything graphical until I type startx.
I'm writing a script to automatically get my TEAMSPEAK3 server to run at startup.The script is like this and is placed at init.d and added too chkconfig.
#!/bin/sh
# chkconfig: 2345 95 20
# description: Starts Teamspeak 3 server
[code]....
I used my boot disk in rescue mode to solve this, but I would really like to know how to do this the easy way.
Question: when I am booting up and getting all those "OK" green remarks, how do I cancel a daemon that freezes instead of giving me an ok or failed? I have tried <Ctrl><C> with no joy. I have tried dropping to interactive mode ("I") and bypassing the bad daemon, but interactive mode freezes when I go to start GDM, so no joy there either.
I am trying to get the KDE Media screen saver working in GNOME. Is there a way to use kde's screensaver program in gnome on startup, instead of gnome's screen saver program? Basically, I am trying to disable gnome's screensaver, and load kde's program in its place at gnome startup.
View 1 Replies View RelatedI have an annoying problem with a 2 nodes cluster that I don't understand.
One of my server is totally shutdown.
When I start cman after a reboot on the other server, it hangs on "Starting fencing...". The process which is actually hanging is : /sbin/fence_tool -w -t 300 -m 45 join
When I start this program manually, I get this output :
# /sbin/fence_tool -w -t 300 -m 45 join
Waiting for all 2 nodes to be members
Waiting for all 2 nodes to be members
Waiting for all 2 nodes to be members
Waiting for all 2 nodes to be members
(and so on...)
What I don't understand is why the fence_tool program wait for the 2nd node to join the cluster and don't fence the other node.
Here is my cluster.conf :
<?xml version="1.0"?>
<cluster name="ctpsrv-bdd" config_version="7">
<fence_daemon clean_start="0" post_fail_delay="0" post_join_delay="20"/>
<cman expected_votes="1" two_node="1"/>
[Code]....
Would it be a good idea to edit the cman startup script and remove the "-w" option of command fence_tool join, so the command do not hang up ?
I have a script and I would like it to automatically run whenever the machine starts up. How can I configure it to do that? I am a complete Linux n00b.
View 2 Replies View RelatedI have to type /etc/init.d/network start everytime after log in.I search little over internet and found out some command to fix it so i tried it but i got error response.Here is what i typed and what i got response.[root@winn ~]# system-config-netbootbash: system-config-netboot: comman not foundI also tried to find setting but i could not under Applications > System Settings > Server Settings > Network Booting Service.Also my ifcfg-eth0 files is below:
# Intel Corporation 82566DM-2 Gigabit Network Connection
DEVICE=eth0
BROADCAST=192.168.1.255
[code]....
I use CentOS 5.5 and I've trouble in run shell script after system reboot. That script runs jboss server and it looks that way:
#!/bin/sh
rm -R -f /opt/billing/jboss-6.0.0.M1/server/default/tmp/
rm -R -f /opt/billing/jboss-6.0.0.M1/server/default/work/
/opt/billing/jboss-6.0.0.M1/bin/run.sh -c default -b 0.0.0.0 -C /opt/billing/jboss-6.0.0.M1/server/default/lib/ > /dev/null &
I've created user account for jboss.
privileges of above script are okay. I've tried so far:
- add command to /etc/rc.local
- add script to /etc/rc3.d/ and create symbolic link to it in /etc/init.d/
- add run script by @reboot annotation in crontab (crond automatically starts with OS)
and jboss still sleeps after reboot. I've noticed that commands which remove directories seem to work when I've added them explictly to /etc/rc.local. But next command which runs jboss hasn't been executed.
I successfully created launchers for apps and I can run them in terminal with double clicking.Now I want them to run on startup, automatically. They run with arguments.There is System-> Preferences -> More Preferences - > Sessions - > Startup Programs where I can add my commands.I put:
gnome-terminal -e "/some_path/myapp1 -arg1 - arg2"
gnome-terminal -e "/some_path/myapp2 -arg1 - arg2"
Centos 5.6 - I'm trying to lock the screen immediately after successful gnome user login. My steps...
System > Preferences > More Preferences > Sessions > Startup Programs tab > Add
I've tried the following...
gnome-screensaver-command --lock
/usr/bin/gnome-screensaver-command --lock
Neither of these seem to work from the Sessions gui. Although from terminal I can run gnome-screensaver-command --lock with no problems.
using Xubuntu 9.10 on a Dell GX270, 500MB memory, Intel 82865G integrated graphics.On logging in, I get an Xsession error -- unless I hit Esc, as soon as the initial splash screen (the one with a bundle of mosquitos buzzing around each other) appears. This is iffy -- I have to time it right. The .xsession-errors file produced has the following in it:
Code:
/etc/gdm/Xsession: Beginning session setup...
Setting IM through im-switch for locale=en_US.
[code]....
Ubuntu 10.10 maverick on a Lenovo s10e.
I keep getting a message on startup (although not every time) which tells me the critical temperature is reached (87 C) and the machine is shutting down (unfortunately it's not being written to the log). I then reboot after it has shut down and it's fine.
I just downloaded Ubuntu installer for windows (wubi). After downloading and installing it as dualboot operating system. I went on configuring it. for my bad luck my laptop died due to low battery (I found it the cause, but may be some system error, well I don't think so) when the system was updating itself. Now I can boot to my old Windows 7 successfully, Ubuntu recover mode also. but when I try to boot with normal Ubuntu, it comes to welcome screen but never takes me to login page. I don't know what went wrong and how can I repair it. But I am really eager to sort it out and enjoy the Ubuntu.
View 5 Replies View RelatedWhen my Fedora server boots it fails starting the MySQL server also if i try to start it from a prompt it says "fail" but the funny thing is that it works. Now i could just say "what the hell it works" but i hate seeing the red error on boot. Fedora boot, fail starting MySQL MySQL server works after boot anyway manual start it fails, but also here it works anyway
View 2 Replies View RelatedI'm trying to execute script (java,php) on startup....before this we set it in /etc/inittab and it works find, but lately i found that the php script not startup as usual after we do yum update( although java script still run normally). code...
Another thing i want to ask is, if i have more scripts to run at startup, what should i do becoz there is limited terminal that i can use.
Someone told me that i can:
1)-put the script in /etc/init.d such that i can add it with chkconfig and run as service (not sure how to do this in details also)
2)-add a script in /etc/rc.local (not sure how?write what script)
ntpd startup fails during boot.Does startup just fine manually from command line once it's booted though. Any suggestions what I might adjust?
View 2 Replies View RelatedI recently upgraded to php 5.2 using the testing repository. All went well except for one extension.
root@clibweb2 ~]# php -v
PHP Warning: PHP Startup: Unable to load dynamic library '/usr/lib64/php/modules//usr/lib64/php/modules/http.so' - /usr/lib64/php/modules//usr/lib64/php/modules/http.so: cannot open shared object file: No such file or directory in Unknown on line 0
PHP 5.2.10 (cli) (built: Nov 13 2009 11:44:05)
Copyright (c) 1997-2009 The PHP Group
Zend Engine v2.2.0, Copyright (c) 1998-2009 Zend Technologies
[root@clibweb2 ~]#
I tried:
[root@clibweb2 ~]# ln -s /usr/lib64/php /usr/lib/php
Adding the complete path to php.ini
And using PECL
I still get the error.
Output of
getinfo.sh (general) is at [URL]
The Package specific is at [URL]
I installed miro from PackMan :: Startseite repository with zypper. When I start up miro from terminal, I got below errors: $miro Fatal Python error: pycurl: libcurl link-time version is older than compile-time version ipv6 is sucking wind, so we're switching to ipv4./usr/bin/miro: line 27: 5859 Aborted miro.real "$@" I don't know what's this meaning. My system is openSUSE 11.4 x86_64 KDE 4.6.3.
View 5 Replies View Related