When my Fedora server boots it fails starting the MySQL server also if i try to start it from a prompt it says "fail" but the funny thing is that it works. Now i could just say "what the hell it works" but i hate seeing the red error on boot. Fedora boot, fail starting MySQL MySQL server works after boot anyway manual start it fails, but also here it works anyway
View 2 RepliesI think this goes here, but I'm not sure. I decided that XAMPP had been troublesome enough. MySQL never worked. So I decided to instal the LAMP stack offered by YaST. I went about installing it thinking that it would all work. But it seems that I was wrong. So I try to start mysql, and here's what I get:
Code:
the-matrix:~ # mysql start
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/mysql/mysql.sock' (2) or
Code:
the-matrix:~ # rcmysql start
Starting service MySQL warning: /var/mysql/mysql.sock didn't appear within 30 seconds
chmod: cannot access `/var/run/mysql/mysqld.pid': No such file or directory
[Code]...
I have installed Mysql in Ubuntu 9, for the use of roundcube database.After installing iam getting the error like this
* Stopping MySQL database server mysqld [ OK ]
* Starting MySQL database server mysqld [ OK ]
* Checking for corrupt, not cleanly closed and upgrade needing tables.
So because of this in the roundcube configuration its giving the error message that MYSQL is not installed. So Kindly give me a idea how to solve this.
I've been attempting to set up a LAMP for local web development, which meant installing mysql-server. But now have a problem when trying to run mysql, I get:-
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
When trying to downgrade mysql-server I saw that there are dependency problems between the various modules (but can't recall which). But whichever route I truied the results are always the same.
Thought about trying XAMPP but I note that even has it's problems, is there any way I can get a lamp set up on FC14, or must I give it up as a bad job.
Howver, just been trying to again to fix the problems with downgrading mysql and get:-
Error: Package: mysql-server-5.1.55-1.fc14.i686 (@updates)
Requires: mysql(x86-32) = 5.1.55-1.fc14
Removing: mysql-5.1.55-1.fc14.i686 (@updates)
mysql(x86-32) = 5.1.55-1.fc14
I have MySQL 5.1.34 and PHP 5.1.6 installed on my system, how do I install php-mysql? Each time I try, it says
mysql-5.0.45-7.el5.i386 from base has depsolving problems
-- > mysql conflicts with mysql-server-community
error: mysql conflicts with mysql-server-community
I just configured a complete Cent OS 5.2 system for use as a web server. I can configure Apache and PHP but MySQl seems to be causing some issues -
[mysqld]
datadir=/var/lib/mysql
socket = /var/lib/mysql/mysql.sock
user=mysql
# Default to using old password format for compatibility with mysql 3.x
# clients (those using the mysqlclient10 compatibility package).
[Code]...
I have a LAMP on Ubuntu 10.4 The MySQL is binded to a specific IP of a lan. When the system starts, the MySQL fails to start returning this error
[Code]...
I wrote a code in C to connect to MySQL by using mysql_real_connect function but I recieved error "Can't connect to local MySQL server through socket '/tmp/mysql.sock' (2)" (by using mysql_error function).
I also did the following things: in mysql I typed 'SHOW VARIABLES LIKE '%SOCKET%'', it returned /var/lib/mysql/mysql.sock I typed 'mysql_config --socket' in shell, it returned /var/lib/mysql/mysql.sock I modified /etc/my.cnf file
Im getting this error when i try to run mysql from a shell
Code:
ERROR 2002 (HY0000): can't connect to local MySQL server through socket
I have installed MySQL over yum on fedora.
but the path and file /var/lib/mysql/mysql.sock does not exist on my system?
I've tried /etc/init.d/mysql start, and it actually starts, or at least, it doesn't error out. But when I do pgrep mysql I get nothing, and when I try to login with mysql -p as root, I get
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/run/mysqld/mysqld.sock' (2)
None of my other logins work, either, but since pgrep mysql didn't work, it's clear that MySQL just isn't running. I tried uninstalling and reinstalling mysql-server via apt-get, but I get the same thing. The logs in /var/log/syslog show this:
Apr 11 14:31:26 /etc/init.d/mysql[9774]: #007/usr/bin/mysqladmin: connect to server at 'localhost' failed
Apr 11 14:31:26 /etc/init.d/mysql[9774]: error: 'Can't connect to local MySQL server
[code].....
I tried to install php from source file on centos server and i got the error as # ./configure --with-apxs2=/usr/local/packages/apache/bin/apxs --with-mysql --prefix=/usr/local/packages/apache/php --enable-force-cgi-redirect --disable-cgi --with-zlib --with-gettext --with-gdbm
checking for specified location of the MySQL UNIX socket... no checking for MySQL UNIX socket location... /var/lib/mysql/mysql.sock checking for mysql_close in -lmysqlclient... no checking for mysql_error in -lmysqlclient... no configure: error: mysql configure failed. Please check config.log for more information.
I have an e-mail production server that has been running fine for almost two years.
Notice mail was not serving today and login to a bunch of errors in messages
However, I think they are all from not being able to access MySQL and when I:
mysql -u root -p
I get:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)
i am using liferay5.2(mysql included in the download pack) on fedora. while liferay is working fine but i cannot connect to mysql.i am getting the error
[
[root@localhost ~]# ln -s /var/lib/mysql/mysql.sock /tmp
[root@localhost ~]# /etc/init.d/mysqld start
Timeout error occurred trying to start MySQL Daemon.
[code]....
i didnt find the mysql.sock file in the location /var/lib/mysql/mysql.sock. i cannot find the portal-ext.properties file also to make intial settings.
I am getting this error when I try to connect to my MySQL database from a PHP page. MySQL is working fine on it's own and PHP is working on it's own. "Fatal error: Call to undefined function mysql_connect() in /usr/local/htdocs/test.php on line 11" I have found instances on the Internet where other people had the same problem but from everything I've read, none of it appears to do anything for me. I have read that I need the "extension=mysql.so" in my php.ini file and to uncomment it but it's not in there and I don't even have the "mysql.so" file. Many people have said to install the MySQL "devel" package, which I have also done and it is still not adding the file. (Tried "rpm -i php-mysql") I have also tried running the PHP ./configure again with the "--with-mysql". After all of these I still can't seem to get any further than I was when I found out I had a problem
View 10 Replies View RelatedI'm trying to install the squeezebox server software in Ubuntu 9.10 and I'm getting an error when it tries to install mysql-server. Seems like people have run into this before [URL]... but so far, I can't find a solution.
[code]...
I am installing MySql on Linux (Fedora core 11). Basically I am newbie & wana create a PHP application. I am done with PHP & Apache installation. I am facing some serious problems while Installing Mysql. below are all the tried codes & the outputs/errors:
[code]...
while creating a new database iam facing the below problem
mysql> create database auto-download-gta; ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near '-download-gta' at line 1
installed mySQL-server on the Ubuntu and configured it(i've made this lots of times). After that I installed mySQL-Admin and connected successfuly to the server. Tried some queries and worked fine. So, then I opened tcp 3306 for incoming and outgoing from anywhare. Went to my XP station and install mysql odbc driver, allowed tcp 3306 and tried to connect but I got an error 10061. So I decided to telnet my server with 3306 port and I got "connection failed".
View 2 Replies View RelatedWhen i run the command:
It shows output as:
I follow instruction on how to install ISPConfig2 in CentOS 5.3. CentOS 5.3 ISPConfig 2 At part 10. MySQL(5.0), I stuck with an error. Said that "Host is not allowed to connect to this MySQL server. What is the problem? Why not allowed?
View 1 Replies View Relatedi am trying to install mysql server on fedora8 using yum and i get this kind of a error Could not retrieve mirrorlist http://mirrors.fedoraproject.org/mir...hide&arch=i386 error was [Errno 4] IOError: <urlopen error (-3, 'Temporary failure in name resolution')> Error:Cannot retrieve repository metadata (repomd.xml) for repository: development. Please verify its path and try again
View 3 Replies View Relatedwhen i tried the command mysql -u root it is giving me an error that "Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock'(2)" although my mysql server is ruuning beacuse i m using XAMMP server and its inbuild mysql server is running i cannot use service mysqld start command beacuse this command try to start another instance of mysql and i required mysql of XAMMP.
View 3 Replies View RelatedAt the moment I am having a problem with the MySQL server on my VPS. It's a completely fresh install of both Debian 5 and MySQL but the problem is upon logging in I get:
[root@boris ~]#mysql -u root -p
Enter password:
ERROR 1045 (28000): Access denied for user 'root'@'localhost' (using password: YES)
[code]....
I'm try to setup a database server using mysql, the server starts fine, and I can access it using the built in mysql client via console (adding databases and tables works fine), but the problem is... I always get a connection refused error whenever I access the database outside the built in mysql client (example, if I write a code that connects to mysql). So, I tried execute an nmap command and the only ports open are these ports:
[Code]....
there's no 3306 for mysql... I'm thinking that the firewall is just blocking the port that mysql is using, but my question is, how could the built in client connect to the server if there's no open port for mysql server? Don't clients usually access a servers through ports?
I'm using Ubuntu 10.04 LTS - the Lucid Lynx.
I have reinstalled mysql-server-5.1 using the command "sudo apt-get --reinstall install mysql-server-5.1".
But its giving error message at the end of installation when its trying to start the server.
The error message is as follows.
When i tried to start the server after the installation, i get this error message
Note : The file "/etc/mysql/my.cnf" is empty.
I have a VPS running on centos-5-x86 and mysql server went down two days ago this is my mysql server log
110602 18:28:09 mysqld started
InnoDB: The log sequence number in ibdata files does not match
InnoDB: the log sequence number in the ib_logfiles!
110602 18:28:14 InnoDB: Database was not shut down normally!
InnoDB: Starting crash recovery.
[Code]...
I've downloaded and installed MySQL-client-5.1.53-1.glibc23.x86_64.rpm. I'm rather new to linux so it might be I haven't started the server. Unfortunately I have no idea which file is responsible for that. It is also possible that my head isn't functioning correctly ( if at all ).
Error I receive is:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (2)
i was trying to allow remote access to mysql by following mysql was running perfectly until i got here :
Code:
/sbin/iptables -A INPUT -i eth0 -s 192.168.1.0/24 -p tcp --destination-port 3306 -j ACCEPT
i changed my.cnf bind-address line to : "bind-address = 127.0.0.1" and nothing
[code]....
I realize this probably isn't the best place to be posting this as it relates to project open, but they don't have a forum.
We recently upgraded our Ubuntu server and now when trying to use project open we get the follow error message, does anyone know why this may be, or have any guesses as to why this may be.
Server startup failed: Error during bootstrapping
No fullquery for dbqd.acs-tcl.tcl.apm-procs.apm_package_installed_p_not_cached.apm_packa ge_installed_p and default SQL empty - query for statement missig while executing
"error "No fullquery for $statement_name and default SQL empty - query for statement missing""
(procedure "db_qd_replace_sql" line 10)
code....
I have mysql downloaded and when I type mysql into the command line I get this:
ERROR 2002 (HY000): Can't connect to local MySQL server through socket '/var/lib/mysql/mysql.sock' (111)