i have centos 5.5 and qmail installed in it this qmail is used for internal mail , we are not send mail from internal to external ids i.e gmail, yahoo etc, this qmail intalled on 192.x.x.x ip server this ip is not live ip but my problem is that from few days mail are sending from internal to external like indiatimes ,yahoo etc
View 1 RepliesI'd like to have anything that tries to send mail locally on my machine (including crontab reports for instance) to be handled by my ISP's smtp server instead of my machine acting like it's own SMTP server. I've spent around 15 hours trying to figure out how to do this and I keep either getting into things that I don't understand, or hitting brick walls (for instance, I found nullmailer, but after installing it, it seemed like it would only work on Unix) Is there an application like nullmailer which I can use as my MTA to forward all internal mail to a different SMTP?
View 3 Replies View RelatedMy ISP blocks outgoing email if it does not login properly with a valid account. I successfully configured sendmail to use SMART_HOST and confAUTH_OPTIONS with confAUTH_MECHANISM set to LOGIN PLAIN.
It successfully sends email because I tested it with evolution sending through 127.0.0.1, but I need to specify myacount@mydomain.com as the email address for root.
But it doesn't work for logwatch because it sends as from root@localhost.localdomain, and my ISP's smtp server rejects it. The message I get back in root@localhost account is the following:
----- Transcript of session follows -----
... while talking to smtp.mydomain.com.:
>>> MAIL From:<root@localhost.localdomain> SIZE=581 AUTH=<>
<<< 550 5.7.1 Client does not have permissions to send as this sender
554 5.0.0 Service unavailable
I thought that I should masquerade all emails from this domain, so I configured sendmail as specified in [1] section "24.3.1.4. Masquerading", but it doesn't work. It seems that masquerading in sendmail is broken or something is wrong in the documentation.
[1] [URL]
I have sendmail 8.13.8-2 and centos-release-5-4.el5.centos.1.
Is there a way to specify the "From:myacount@mydomain.com" in logwatch ? or Is there a way to make it work the masquerading in sendmail so I can masquerade everything as coming from a specific account?
I'm using the mail command and I am able to send mail to my gmail account with out any problems. However when I send mail to deco -at- mycompany.com I nothing happens and no mail ever arrives in my mailbox. It might be worth mentioned that my centos5 is a virtual machine on the same server as the company exchange mail server.
View 1 Replies View RelatedI just setup a mail server on my web server and I cannot for the life of me figure out how to send emails to external (as in outside my LAN) emails or receive from external emails. I'm using Postfix with Dovecot and Squirrelmail. I get this delivery report in Squirrelmail when trying to send an email to my hotmail address.
Final-Recipient: rfc822; example@hotmail.com
Action: failed
Status: 5.0.0
Remote-MTA: dns; mx3.hotmail.com
Diagnostic-Code: smtp; 550 DY-001 Mail rejected by Windows Live Hotmail for policy reasons. We generally do not accept email from dynamic IP's as they are not typically used to deliver unauthenticated SMTP e-mail to an Internet mail server. [URL] maintains lists of dynamic and residential IP addresses. If you are not an email/network admin please contact your E-mail/Internet Service Provider for help. Email/network admins, please visit [URL] for email delivery information and support.
i have centos 5.5 and qmail installed in it this qmail is used for internal mail , we are not send mail from internal to external ids i.e gmail, yahoo etc, this qmail intalled on 192.x.x.x ip server this ip is not live ip but my problem is that from few days mail are sending from internal to external like indiatimes ,yahoo
View 2 Replies View Relatedcannot find what should I do, which conf should I edit to make it work. I cant send email from command line.
Is it necesary to have mail server setup? Hope not, just want simple txt mail sent. I tried MUTT and MAIL.
I want to send mail to potential customers from my localhost server in my SOHO. I have a web site hosted with a company called geek hosting [URL], so I have access to the mail services through them... I want to their mail server to push things out to the world form my localhost server.
I do have a registered domain name which the hosted site runs under
the domain name for my centos 5.4 server is localhosthost.localdomain.
I am very new to CentOS and running a server in general. I managed to get a server setup with CentOS, and it's running a wordpress driven social networking site. Everything is fine except sometimes my server won't send registration/activation emails to some email addresses. This is a huge problem because people signup but then can't activate their account. I don't understand why its sending some and not sending others based on the email domain? The guys at wordpress said "it's that your server does not support SMTP or at least wp_mail() in its normal form" but that doesn't mean much to me.
View 3 Replies View RelatedOne of my mailservers running postfix has suddenly stopped sending mail and has been generating the following errors:
Jan 7 12:03:08 postfix/sendmail[3560]: warning: premature end-of-input on /usr/sbin/postdrop -r while reading input attribute name
Jan 7 12:03:08 postfix/sendmail[3560]: fatal: root(0): unable to execute /usr/sbin/postdrop -r: Success
[Code].....
Things I have tried to fix this problem, but didn't work.
1) Stopped postfix, uninstalled and reinstalled.
2) Did a complete filesystem relabel with a touch /.autorelabel and reboot.
3) Did a restorecon -F -R on /etc/postfix, /var/spool/postfix and /usr/sbin/post*
Nothing above has worked and have no idea why with selinux disabled postfix works and with it on it fails.
I have configured mail server with postfix with dovecot with no encryption:
When connecting with Thunderbird imap is working fine. When sending email from another domain to this domain again it is fine. But when I want to send mail from my domain to another it gives me error and this is /var/log/maillog:
Quote:Jan 18 18:23:09 srv1 postfix/smtpd[3991]: NOQUEUE: reject: RCPT from unknown[95.81.67.120]: 554 5.7.1 <Recipient email>: Relay access denied; from=<Sender> to=<Recipient email> proto=ESMTP helo=<[127.0.0.1]>
I have a DELL running CentOS 5.4 with 2 active NICs, one with an external IP address (eth0) on 123.456.78.9 and another that is connected to our internal network (eth1), 192.168.2.x. When I reboot the server, everything works glowingly. External traffic is correctly routed over the external interface (eth0) and internal traffic over the internal interface (eth1). After some random amount of time, a couple of hours and sometimes a couple of days, all traffic starts getting routed over our internal network, so DNS requests fail, internet pages don't load, smtp connections fail, etc.
I'm assuming that everything that's not headed for our .1, .2 or VPN internal networks would go out the external interface. And why this works for a period of time and then stops working is beyond me. And when external traffic starts going over the internal interface, I just reboot and it starts working like it's supposed to again.
in Lucid ive been trying to get the mail applet to light up green by sending myself mail. Does this applet only light up when IMs r received or does this also work with evolution and if so what might i have done wrong in evolution, ive tried it with evolution open and evolution closed.
View 8 Replies View RelatedTwo exchange servers internally. One is setup for example.com (192.168.1.10) and the other is setup for example2.com (192.168.1.20) Both are behind a single public IP.
I want to use postfix to sit in front of the two exchange servers. Postfix will accept mail for both domains and relay to the appropriate server. I have postfix installed with only defaults at this point.
I am setting up a CentOS box as a NAT firewall that needs to also send mail. It needs to send this mail using an outside provider's SMTP. The provider requires SMTP over SSL. None of the machines inside the NAT will ever send mail except via the provider's SMTP nor will they ever receive mail except to local clients via the provider's IMAP servers.
So for the example the machine is TESTMACHINE. There is one internet facing ethernet port connected to a DSL modem via pppoe.
The SMTP it needs to send mail via is mail.host.net which requires SMTP over SSL (port 465) and username/password authentication.
The sendmail documentation is quite confusing on how to get this simple setup operating, so an example showing the appropriate changes to sendmail.mc and other require config files.
I have two servers relavant here: mail.domain.com (1.1.1.1) - which is the nameserver and the mail server for domain.com. www.domain.com (2.2.2.2) - which is the www subdomain for domain.com domain.com (cname www.domain.com) - an alias for www.
The zone file for domain.com lists mail.domain.com as the MX server for domain.com. 2.2.2.2 is actually being served web pages as a virtual host. It's real hostname is www.anotherdomain.com. Mail for domain.com works pretty well, in general. However, if I attempt to send mail from www.domain.com (or its alias domain.com), I get "mail for domain.com loops back to myself" in the postfix logs. On 2.2.2.2 /etc/postfix/mail.cf has mydestination = www.anotherdomain.com, localhost. How do I tell postfix on 2.2.2.2 that mail for domain.com needs to be delivered to mail.domain.com?
I have an external hard drive with an xfs partition on it. It was using an external journal, but in re-installing Slackware I removed the partition holding the external journal, forgetting what it was at the time. I didn't touch the contents of the external hard drive, but now I can't mount it and the various xfs programs seem to demand that it be mounted in order for them to change anything.Anyone have any ideas on how to change an xfs partition from external log to internal? Failing that, how do I get the information off it?
View 1 Replies View RelatedOne of our postfix servers is for sending/receiving internal emails only. When a user entered a wrong recipient address, it will take almost an hour for the user to get the "Recipient address rejected" email. What can be done to let the user get the "Recipient address rejected" email quickier.
View 7 Replies View RelatedThe question is pretty much the same as the subject. I have a bunch of debian servers - most of them running exim4 default installations configured as internet site using dpkg-reconfigure exim4-config. It can send mails fine from php scripts and some other applications, but I can't seem to find a way to forward all root mail to some external address. I have tried adding "root: someaddress@example.com" to /etc/aliases and run newaliases command, but it doesn't seem to work.
View 3 Replies View RelatedI have a Fedora 10 machine that I want to setup to send email. However I don't want it to be a full blown SMTP setup.What I am looking to achieve is when something sends email from the local machine (e.g. from cron) to an address I want it to use an MTA on the local machine which will then connect to, and authenticate with, my e-mail providers SMTP server this will then take care of actually sending the e-mail.I don't want, or need, to setup a full blown SMTP service (i.e. only the local machine should be able to use it) so sendmail seems a bit over the top for my needs. Nor do I want to mess about with MX records (am I right in thinking this will mean I have to manage all mail for my domain?).
View 2 Replies View RelatedI am running CentOS 5.5 and am trying to get Nagios to send out Emails.
After a bit of reading I have the following in my /etc/mail.rc file:
Code:
[root@linux ~]# cat /etc/mail.rc
set ask askcc append dot save crt
ignore Received Message-Id Resent-Message-Id Status Mail-From Return-Path Via
set smtp=172.29.1.76
You have new mail in /var/spool/mail/root
[root@linux ~]#
I have Nagios setup correctly and introduced an error to generate an Email but nothing has come through.I suppose I have two questions:
1. Is mail.rc setup correctly?
2. Can I test to see if mail.rc is working correctly?
I'm simply just having trouble sending mail with postfix. I have all my hostnames, rdns setup properly. I also have iptables open on port 25.
View 9 Replies View Relatedl to a group in Linux? for example, I want to send a notification mail to 20 people and I want to create a group of these 20 people and want to send them the notification
View 5 Replies View RelatedI am using Ferdora 6 OS on which I installed CVS. So whenever I make any changes in CVS, notification mail must be sent to few users.
View 2 Replies View RelatedHow is it possible to send email using the "mail" program? I tried:
echo "testing" | mail -s "test" myaddress@gmail.com
But nothing happened. I made sure that the sendmail daemon was running before I tried. Is there anything else that I have to set up first?
I have OpenSuse 64bit running a web site. I have a form on this site here:- Dynamic Systems Group The script itself works and I have tested it on another hosted server and it works fine. However on my server the email the script sends never arrives, which must be a problem with my Postfix settings I guess. However I also have two pages on my site for testing sending of mail, which BOTH report a postive result:-
[URL]
However even though these pages report successful send the mail stil never arrives. I have looked at many pages and forums on the internet and I am really, really confused as to how to set up Postfix. On the Suse box I have the Mail Server configured in Yast to send mail via my Gmail.com account using TLS and authentication but still no success!
I have kubuntu 9.10 and I would like to configure Ubuntu to can send mail from command line with mailx. I've saw that I need to install a MTA. But I don't know wich install and how.
I follow this tutorial:
[URL]
But when I try to send a message, in the mail.log says me:
Code:
Jan 5 10:21:33 david postfix/smtp[3795]: 41AEA41DBE: to=<pepelu@gmail.com>, relay=alt1.gmail-smtp-in.l.google.com[209.85.223.73]:25, delay=1086, d
elays=1022/0.01/32/32, dsn=4.7.0, status=deferred (host alt1.gmail-
[Code].....
When I sending mail to defined mail on the internet page I have to configure Evolution and open it for sending. Is it possible to send mail without opening Evolution. Just send to defined mail on internet page.
View 8 Replies View RelatedI want to send mails via gmail with php. I need to know how to configure main.cf, php.ini, postfix,smtp... and all what is necessary. I tried a lot but no results.
View 5 Replies View RelatedGNU/linux kernel 2.6, Slackware 12.0.
I ran mail (aka mailx) and opened an account foo. If I remain inside the program, the command 'account foo' prints the account data. Good. But if I exit the program, and rerun it, then the command 'account' has no output which is to say I have no account.