I own a Pentium 4 server (no virtualization extensions). I installed CentOs 5.3 and Xen packages.I look for xen tools like xentop, xm... but they do not exist.This are the packages I installed on server:
xen-3.0.3-80.el5_3.2
xem-devel-3.0.3-80.el5_3.2
xen-libs-3.0.3-80.el5_3.2
[code]...
And a xend deamon is running on operating system (I saw it in a ps aux output).
Why is cx88-dvb no longer included in the CentOS 5 kernels found in centosplus?
It is present in all 2.6.18-92.1.x versions, but not in 2.6.18-128.1.x versions.
Since RHEL is similar to CentOS posting it here.
Upon booting from DVD, i get the below error: "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
I have IDE Sony DVD RW AW-G170.
BIOS Setting:
Downloaded the CentOS-5.4-i386-bin-DVD image from centos.org from DVD.torrent using bittorrent file.
When booting from the DVD, it gives me the boot prompt:
Upon pressing enter, the log messages of the boot detect the media drive as: hdc: Sony DVD RW AW-G170 IDE ATAPI CD.
The below steps occur:
1) Select the keyboard type: selected us
2) Select the Language : selected us
3) Select the image:
- Local CDROM
- Hard Drive
- NFS Image
...
...
selected Local CDROM
Then the above error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
The booting steps does not ask the for media check step.
The below methods have been tried to solve the problem:
- Burnt the image in another 2 DVDs but the same error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
- Upon burning the DVD image , selected the DVD read speed: 8x. Upon burning the DVD selected 18x for burning. and then tried to boot with that DVD
- At the boot prompt entered : linux hdc=cdrom replaced hdc=hdb but the error remains.
i want to ask about "jot" i got this error : Quote: jot: command not found
View 1 Replies View RelatedDuring installation of set up its show g++ command not found and Failed! how can I install g++ .
View 2 Replies View RelatedI have installed tvtime in CentOS 5.5. I'm using a phillips tvtuner card saa7134. But when I modprobe saa7134, it says Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]# modprobe saa7134
FATAL: Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]#lspci | grep -i 'saa'
02:02.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
I'm trying to compile and install Subversion 1.5.6 on Centos 5.2.
I did:
And it seems to all go well, but when I run "svn" or "svnadmin" I get the error:
svn: error while loading shared libraries: libsvn_fs_base-1.so.0: cannot open shared object file: No such file or directory
I can't locate this file on my system, and I'm wondering where I can find this.
I am pretty new to linux and trying to figure things out as I go. I have two linux installs, one is Fedora 10 and the other is CentOS 5.3I have an application that when I compile gives this error:gtk-builder-convert: command not foundI have done some research on these forums and other places, and I think (although not 100% sure), that my problem is that this command is not available until GTK 2.12 or higher.From what I can tell, CentOS has 2.10.Am I on the right track that I somehow need to update my GTK to 2.12 or better? I noticed on gtk.org the latest release is 2.16. However, its seems no package is available for CentOS? Am I out of luck or is there an option to get this updated? On my fedora install, this works fine and I noticed in the getting started forum it says that sometimes Fedora packages will work, is that a safe option?
View 2 Replies View RelatedI've tried to install mysql-server using yum, but the other mysql-packages that needs to be upgraded cannot be found on any of the mirrors that yum tries.
This is the output:
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* epel: mirrors.se.eu.kernel.org
* base: ftp.crc.dk
* updates: ftp.crc.dk
[Code]....
My OS is Cent OS 5 server and I'm trying to find mingw32 in the repositories of Cent OS 5, but not found.
Do you know any repository with mingw32?
I installed openxenmanager without a problem. but when I tried to start it I got: ImportError: No module named gtkvnc
the start script is in python, and I am using python2.5 to run it. I already installed
gtk-gtk-vnc.i386 0.3.8-3.el5 installed
gtk-vnc.x86_64 0.3.8-3.el5 installed
gtk-vnc-python.x86_64 0.3.8-3.el5 installed
Note: when I use python2.4 I got another error and it skip the previous one, the error is: ImportError: No module named hashlib
and when I comment it the application is running but with errors.
Anyone have any luck getting Firefox's binary to run under CentOS 5.5 from Mozilla's web site?
# ls
firefox-4.0.tar.bz2
# /usr/lib/firefox
/usr/lib/firefox-4.0.0/firefox-bin: /usr/lib/libstdc++.so.6:
version `GLIBCXX_3.4.9' not found (required by /usr/lib/firefox-4.0.0/libxul.so)
I have installed apache 2.2 from source and it works prefectly.
I compiled and installed php 5.2 but php pages resolve to page not found.
I checked the logs but did not find anything also apache has loaded the php5 module successfully.
Below is the apache configuration
[URL]
have a Dell with a 1510 WLAN mini card and tried the solution posted by pschaff in the parent forum. When I got through with the process, I could no longer connect to the internet with a hard-wired ethernet connection. When I open the network connection manager and click on Activate, I get the message:/sbin/ifup: configuration for eth0 not foundUsage: ifap <device name>etho used to be the connection I had to the internet with a hard wired ethernet cable to my modem. I have attached the lspci -m and lspci -n data suggested
View 5 Replies View RelatedI installed centos on a server with a exabyte vxa-2 tape-drive. There are two harddisks and the tapedrive on the Adaptec SCSI 2010s Contoller. The harddisks are working , but it doesn't find the tapedrive. And there is nothing in /proc/scsi/scsi.What can i do to add the tape drive?
View 1 Replies View RelatedWith this issue:
$ sudo shutdown -r now
sudo: shutdown: command not found
This is on a CentOS 5.3 kernel 2.6.18.164.el5 SMP. I have a single physical NIC which has an untagged vlan and 4 tagged vlans on it. During boot up, I receive the following message:
"Bringing up interface ifcfg-eth0: /etc/sysconfig/network-scripts/ifup-eth line 121: is_bonding_device: command not found"
"Bringing up interface ifcfg-eth0.3333: Added Vlan with VID == 3333 to IF -:eth0:-
[code]....
I'm new at Centos, although I am familiar with Redhat.I have a laptop that has Windows XP installed on it, and I want this to run Centos 5.3 instead.I read some tutorials online, where I found the download "CentOS-5.3-i386-LiveCD". I burned this to a DVD-RW. When I put the disk in my drive and look my my D: Drive it reads: DVD RW Drive (D:) CentOS-5.3-i386-LiveCD.>I am burning with Nero 7 Essentials.I place this in the laptop disk drive, bring up the BIOS, set it to boot from CD, and when I boot it up I get the message "No Operating System Found".I also tried this from another computer, Windows Vista Home Premium, and it skipped the priority boot (which I set to CD) and went right to the hard disk, booting up to Vista like normal.I hope I'm just doing something wrong.. When I go into the DVD, I first of all see a folder labeled "LiveOS" - Then inside -> -osmin - IMG File - 12.0 KB-squashfs - IMG File - 677 MB
View 7 Replies View RelatedBefore creating this topic I googled a lot and found lots of forum topics and blog posts with similar problem. But that did not help me to fix it. So, I decided to describe it here. I have a virtual machine with CentOS 5.5 and it was working like a charm. But then I turned it off to make a backup copy of this virtual machine and after that it has a boot problem. If I just turn it on, it shows the following error message:
Activating logical volumes Volume group "VolGroup00" not found Trying to resume from /dev/VolGroup00/LogVol01 Unable to access resume device (/dev/VolGroup00/LogVol01) ... Kernel panic ...! During the reboot I can see 3 kernels and if I select the 2nd one the virtual machine starts fine, it founds the volume group etc. (But there is also a problem - it can not connect the network adapters.) So, it is not possible to boot it with the newest kernel (2.6.18-194.17.1.el5), but it is possible with an older one (2.6.18-194.11...)
I looked into GRUB's menu.lst and it seems to be fine. I also tried #mkinitrd /boot/initrd-2.6.18-92.el5.img 2.6.18-92.el5 no luck! Yes, I can insert DVD .iso and boot from it in "linux rescue" mode.
I`ve boot my laptop by centos. then my devices cant be found.
View 1 Replies View RelatedI'm a user of RHEL5 in a HP z800 workstation and I want to use the CentOS5 repositories too.problem with RHEL5 is that yum can't find the gfortran packages in the repositories.
I've tried to use the CentOS5 repos. I've created a file in /etc/yum.repos.d called CentOS5.repo that contains:
[CentOS5 base]
name=CentOS-5-Base
mirrorlist=http://mirrorlist.centos.org/?release=5&arch=x86_64&repo=os
#baseurl=http://mirror.centos.org/centos/5/os/x86_64/
[code]....
I was checking my server and found a /net directory with nothing visible inside. The mysterious directory is /net and I checked to make sure nothing was mounted to it:
[root@mysql /]# mount
/dev/sda1 on / type ext3 (rw)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
devpts on /dev/pts type devpts (rw,gid=5,mode=620)
tmpfs on /dev/shm type tmpfs (rw)
none on /proc/sys/fs/binfmt_misc type binfmt_misc (rw)
sunrpc on /var/lib/nfs/rpc_pipefs type rpc_pipefs (rw)
I installed squid 2.7 and want to use squid_session external acl rule. But there is no squid_session in any dir, looked everywhere. On my Ubuntu box I also have squid 2.7 and there I have squid_session.
View 4 Replies View RelatedI'm trying to get Xorg running on a Dell 2850.I can't get it to work.I installed xorg-x11-drivers via yum, and used both "Radeon / ati" drivers, including the default vesa.
Here are the main errors (error log file attached):
Could not init font path element unix/:7100, removing from list!
(**) RADEON(0): RADEONSaveScreen(2)
localuser:root being added to access control list
No profile for user 'root' found
[code]...
and at the end it says:
FreeFontPath: FPE "built-ins" refcount is 2, should be 1; fixing.
I recently built a cluster with Centos 5.3 and nodes that used different versions of the w83627ehf sensors chip. On some nodes sensors-detect detected the chip:
Found `Winbond W83627DHG Super IO Sensors' Success!(address 0x290, driver `w83627ehf')
But starting lm_sensors returned the error: Starting lm_sensors: No sensors found!
On other nodes sensors-detect did not detect the chip at all: Found unknown chip with ID 0xb073(logical device B has address 0x290, could be sensors)
[Code]....
I have just done a reinstall of Centos 5.3 on a dedicated server (via a KVM). My partition arrangement was the default presented to me by the installer:
As you can see, I'm using LVM for everything other than /boot (I need to use LVM for an app I am testing).
On reboot, I get the following:
[QUOTE]
It looks like it can't find vmlinuz-2.6.18-128.el5 in /boot.
I have rebooted using the Centos Install Disk 1 and gone in to rescue mode. Rescue mode mounted my / under /mnt/sysimage, from there I could see that /boot had been mounted from /dev/sda1 as it should be.
However, there was no initrd.image or /vmlinuz-2.6.18-128.el5 under /boot or /boot/grub. Shouldn't the CentOS installer have created these?
Is there anyway I can recover this installation?
I am quite new to centos as I am from a windows back ground and trying to change over. I am trying to install Asterisk on a dell quadcore server running centos. I need to install Dahdi for hardware support but when I try to install it I get the following error You do not appear to have the sources for the 2.6.18-164.6.1.el5 kernel installed I don't have a clue
View 2 Replies View Relatedssh - execute the script remotely / File not found: ''I am uisng amazon ec2-api-tool & ec2-ami-tool
i was unable to execute through ssh. Getting error as File not found: The same script i can able to run directly in client machine successfully. Through ssh i was uanble to run the script remotely Source : myScript.sh ec2-create-volume --size $1 --availability-zone $2 $ssh -i key.pem root@myhost ./myScript.sh 10 us-east-1a In remote machine i have permission for myScript.sh as -rwxr-xr-x
Note:Reference link
1) How to create an ebs image from an existing ec2 instance
2) Building EBS Boot and S3 Based AMIs for EC2 with Ubuntu vmbuilder - Alestic.com
This is what I did till now and all was installed with success:
yum update
wget [URL]
yum install lighttpd
chkconfig --levels 235 lighttpd on
/etc/init.d/lighttpd start
Must I configure something else too? if yes... what?
I am looking for gcc installation in CentOS 5.4. I cannot use yum install since not connected to internet. I tried to do sudo apt-get install build-essential but received the following error: sudo: apt-get: command not found How to install gcc in my Linix machine?
View 2 Replies View Related