CentOS 5 :: GTK-Build-Converter Not Found?
Apr 23, 2009
I am pretty new to linux and trying to figure things out as I go. I have two linux installs, one is Fedora 10 and the other is CentOS 5.3I have an application that when I compile gives this error:gtk-builder-convert: command not foundI have done some research on these forums and other places, and I think (although not 100% sure), that my problem is that this command is not available until GTK 2.12 or higher.From what I can tell, CentOS has 2.10.Am I on the right track that I somehow need to update my GTK to 2.12 or better? I noticed on gtk.org the latest release is 2.16. However, its seems no package is available for CentOS? Am I out of luck or is there an option to get this updated? On my fedora install, this works fine and I noticed in the getting started forum it says that sometimes Fedora packages will work, is that a safe option?
View 2 Replies
ADVERTISEMENT
Mar 27, 2010
I was using Daisy Dock with KDE 4.4.1 and I've clean installed back to stock 4.3.5 and cant' find it anywhere...is it only in the Factory KDE repos? (I've found it in the build service, but don't have dependencies version numbers high enough) hard to believe it was added after 4.3.5. Got, dropped down a version on the dock and it installed manually from build service.
View 4 Replies
View Related
Apr 30, 2011
I've getting strange build errors when using make-kpkg with the latest (2.6.39-rc5) vanilla kernel.I'm using the procedure outlined here:
https:[url]....e.g.:
Code:
make oldconfig CONCURRENCY_LEVEL=`getconf _NPROCESSORS_ONLN` fakeroot make-kpkg --initrd --append-to-version=-custom kernel_image kernel_headers
I'm getting the following build errors:
Code:
Building modules, stage 2.
MODPOST 3053 modules
WARNING: modpost: Found 60 section mismatch(es).To see full details build your kernel with:'make CONFIG_DEBUG_SECTION_MISMATCH=y'
CC arch/x86/crypto/aesni-intel.mod.o[code]....
There is even much more error output but it looks like it is basically the same issue.
View 2 Replies
View Related
Feb 16, 2010
I need to install latest xen 3.4.2 to my centOS. I have:
* xen 3.4.2
* Linux 2.6.18 with Xen 3.4.x support source tarball, updated for Xen 3.4.2
* CentOS kernel-2.6.18-164.11.1.el5
Linux 2.6.18 with Xen 3.4.x have old cciss and scsi drivers. It don't support my hardware.
CentOS kernel-2.6.18-164.11.1.el5 works normaly, but was not compiled with xen 3.4.2.
How can I patch Linux 2.6.18 kernel or upgade CentOS kernel to the latest xen?
View 9 Replies
View Related
Jul 2, 2009
Why is cx88-dvb no longer included in the CentOS 5 kernels found in centosplus?
It is present in all 2.6.18-92.1.x versions, but not in 2.6.18-128.1.x versions.
View 3 Replies
View Related
Aug 28, 2009
Is there any way of getting the build logs of the CentOS packages? I'm dealing with a possible build problem in CentOS's Samba similar to [URL], so it would be very useful to have the build logs available to check for such dependency problems, etc.
View 6 Replies
View Related
Mar 18, 2010
I am trying to build a custom kernel but I couldn't. Here are the steps to reproduce it:
1. Set Up an RPM Build Environment as its is explained in [URL]
2. Then follow the instructions in [URL]
3. When I try to install the kernel source rpm I get the following error:
[matias@Centos ~]$ rpm -i [URL
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root . . .
warning: user mockbuild does not exist - using root
warning: group mockbuild does not exist - using root
error: unpacking of archive failed on file /home/matias/rpmbuild/SOURCES/linux-2.6.18.tar.bz2;4ba24901: cpio: read
View 8 Replies
View Related
Dec 24, 2010
I built an RPM, which will copy set of files,executes scripts and install's third party rpms. but the thirdparty rpm's are not getting installed and throws the below warning warning: cannot get shared lock on /var/lib/rpm/Packages From my analysis, i understood that the primary rpm holds a lock and its unable to install the rpms packaged inside.
View 1 Replies
View Related
Jul 19, 2011
I am trying to build rpm for openssh 5.8p1 on centos 5.6 (32 bit) as i have not found rpm for i386 online. i followed the below mentioned steps but when i apply command rpmbuild -bb openssh.spec it gives this error at the end:
configure error: Pam Headers not found
error: Bad exit status from /var/tmp/rpm-tmp.18348 (%build)
if there is any rpm availble online or to sort out this build problem,Following steps i followed to build rpm. wget http://mirror.mcs.anl.gov/openssh/portable/openssh-5.8p1.tar.gz
tar -xvzf openssh-5.8p1.tar.gz[code]......
Now if you go back into /usr/src/redhat/RPMS/<arch> , you should see three RPMs. Go ahead and install them:rpm -Uvh *.rpm
View 5 Replies
View Related
Apr 7, 2010
Since RHEL is similar to CentOS posting it here.
Upon booting from DVD, i get the below error: "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
I have IDE Sony DVD RW AW-G170.
BIOS Setting:
Downloaded the CentOS-5.4-i386-bin-DVD image from centos.org from DVD.torrent using bittorrent file.
When booting from the DVD, it gives me the boot prompt:
Upon pressing enter, the log messages of the boot detect the media drive as: hdc: Sony DVD RW AW-G170 IDE ATAPI CD.
The below steps occur:
1) Select the keyboard type: selected us
2) Select the Language : selected us
3) Select the image:
- Local CDROM
- Hard Drive
- NFS Image
...
...
selected Local CDROM
Then the above error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
The booting steps does not ask the for media check step.
The below methods have been tried to solve the problem:
- Burnt the image in another 2 DVDs but the same error "CentOS CD Not found in any of the media drives. Please insert CentOS CD and press OK."
- Upon burning the DVD image , selected the DVD read speed: 8x. Upon burning the DVD selected 18x for burning. and then tried to boot with that DVD
- At the boot prompt entered : linux hdc=cdrom replaced hdc=hdb but the error remains.
View 1 Replies
View Related
Apr 25, 2009
I have a problem with the VMware Workstation 6.5.2 build-156735 on CentOS 5.3. When I start a VM then, after 10-20 minutes the machine and VMware Workstation freeze. The mysterious thing was, after the freeze a large of folders from my two partitons were lost. ( I have two partitons on a NVIDIA Raid,configured with dmraid.) But the partitons still here, I can see them and they are mounted. Its very mysterious.
I have installed the VM's to a folder on my raid. When I killed the processes and restart VMware Workstation I cant start a VM.
VMware says that CentOS 5.3 are supported for the VMware Workstation 6.5.2 build-156735.
View 6 Replies
View Related
Jun 5, 2010
I'm trying to install a BCM 4312 wireless driver following the Centos howto. Howtos>Laptops>Witeless>Broadcom
On step 3, compiling ... module.I get No rule to make target `build' Stop.When I go to the /lib/modules/2.6.18.194.3.1.el5 directory, the Build file link is broken.If i go to the link source /usr/src/kernels/2.6 ...x86_64 does not exist. The /kernels folder is empty.I think I need to reinstall the identified kernel in that directory and reestablish a link to it. but am not savy enough to do that on my own.
View 10 Replies
View Related
Jun 7, 2010
I have tried building the minimal & desktop Centos 5 live CDs to no avail.Depending on the build environment, they either do not build at all (Centos 5, i386) or they build but kernel panic when I boot them (Fedora 12).I've tried various tweaks to the provided kickstart files but I have not had any success.It is important to note that I have written some very impressive (according to others) Fedora kickstart builds so I am at a loss why the stock Centos files fail.
Can anyone point me in the right direction?I suspect it has something to do with the livecd-tools or syslinux versions but all of the versions I have tried it with make no difference.
View 6 Replies
View Related
Jun 21, 2010
Im trying to make a webserver at home. I have a static IP Address of my ISP (o2) I have built a server ( 2.8 p4HT, 2GB Ram, 500GB HDD) Just to test... But, i dont know what to do in the IP Address settings for the IPv4 ( I think thats what it is) Do i put my static IP address in my ISP gave me, or the local IP of the server ( Wich is 192.168.1.72) Im realy confused. Ive tried everything i can think of, Reinstalled the os about 40 times up to now...
View 1 Replies
View Related
Nov 9, 2010
I've been trying to use tracepoints on a newly installed Centos5.5 download, and crash when I call register_trace_sched_switch, which maps to tracepoint_probe_register(sched_switch, my_func) in tracepoint. h/DO_TRACE, where my_func is the function I want called back on a thread switch. I'm trying to do this from an installable module.So I downloaded the sources for 5.5 (current, 2.6.18-194), with the intention of kprinting my way through the above problem.Unlike the downloaded kernel, which is an "ELF 64-bit LSB shared object" (I'm building for an Intel Atom), when I build using "make" in my rpmbuild/BUILD/kernel-26..18/linux-2.6.18.x86-64/ directory, I get an "ELF 64-bit LSB executable". When I try to boot it, I get the complaint "Error 13: Invalid or unsupported executable format".
The closest thing I could find on the web, was a suggestion, for some powerpc system, to use the "ELF executable" format instead of "ELF shared object", the opposite of my issue, and that such could be forced by using a CONFIG-RELOCATABLE manifest.I couldn't find any .config manifest that looked likely to produce the result I want.
View 1 Replies
View Related
Jun 15, 2011
We have an appliance with image being installed from CD/DVD installation
This appliance image is based on CentOS 4.7 kernel/installer/etc. Everything works fine, we ship this product for about 2 years. Recently I had to move it (port everything) to CentOS 5.5 Everything went fine and it works fine except one minor thing )) We can't install it from CD/DVD image yet. Actually it start fine, finds kickstart file, creates partitions correctly, copies install image to harddrive, but fails the next step when it tries to install RPM's
The message we get:
Quote:
the file termcap-5.5-1.20060701.1.noarch.rpm cannot be opened. This is due to a missing file, a corrupt package or corrupt media. Please verify your installation source. If you exit your system will be left in an inconsistent state that will likely require re-installation"
View 2 Replies
View Related
Sep 14, 2010
I have been reading about rescue CD's but haven't found out whether I can make one using my currently running Centos(centos-release-5-4.el5.centos.1 ).I tried to use a Centos cd we have here and it looks fine till it asks where the 'tree' structure is located, when I select cd it ejects it and asks the same question again. Do I need to build a rescue cd containing directory info of my specific system?This is related to wanting to fsck my file system.
View 3 Replies
View Related
May 19, 2011
djmack-5/19/2011-I have purchased an ASUS K52J (intel i7) laptop. I have installed Centos 5.5 (64 bit) from CDs. The I got all the updates and it's now up to 5.6. I have two problems.
(problem-1) - Using the GUI (System->Administration->Hardware) I can get to a Device Manager screen. It shows a JMC250 PCI Express Gigabit Ethernet Controller. Using the GUI (System->Administration->Network) I can only see the wireless (wlan0) as configured and active. The ethernet card is not seen as ether 0. I've seen there are downloads to solve this problem, however I've been 100% unable to do and or understand them. I don't know how to build the kernel and I don't have any source code. I only have the binaries (I think). Is there a version of the kernel that I can put on CDs that has understanding of the ether card I referenced above?
P.S. I've downloaded a binary fix and it says it needs 20 or so dependencies (I have zero idea how to get those).
P.S. I've downloaded a source fix and I couldn't get it to install (I'm not a linux kernel build knowlegable person). I don't have the source either.
(problem-2):As stated above I need direct (RJ45) access to the laptop. I currently have the wireless card working but I have no idea how to get this to work with httpd, ssh, scp.I can access things via a web browser right on the laptop. I cannot access this laptop via a web browser from any other box. I cannot access this box via ssh or scp.I disabled the firewall and I disabled the SELinux security.I am stumped as to why I cannot see this ASUS laptop via httpd and/or ssh/scp.I can ssh and scp to other linux servers but these servers cannot ssh or scp into this laptop.
View 1 Replies
View Related
Feb 20, 2010
I'm in love with my Opensuse 11.2. Love my KDE 4.4. The only thing I miss from my Ubuntu installation, is the ability to use Boxee. I would be more than willing to compile Boxee from source. I only have 2 problems with that:
1) I don't know where I can find all the build-deps or what they are for that matter to build Boxee.
2) I'm running on a Netbook. Yes, my measly Intel Atom is no fun for compiling and building.
What are my options/what can I do to get Boxee up and running on 11.2? I've tried searching on build service for an RPM, but I think due to legal restrictions, Boxee can't be on there.
View 9 Replies
View Related
Feb 16, 2011
looking for LIBEVENT... configure: error: Package requirements (libevent >= 2.0.10) were not met: In order to build transmission 2.21.I need libeventnew version of transmission,I need to build libevent-dev >= 2.0.10 and installed first.But I can't get any information about building development files for libevent.
View 1 Replies
View Related
Sep 24, 2009
as I'm advancing in building some nice rpm I finally wanted to install on of my gems also the build was successful the actual install fails with missing dependencies.
Code:
$ rpm --root /home/sascha/rpmbuild/ -i ./RPMS/x86_64/memcached-1.4.1-2.x86_64.rpm
error: Failed dependencies:
libc.so.6()(64bit) is needed by memcached-1.4.1-2.x86_64
libc.so.6(GLIBC_2.2.5)(64bit) is needed by memcached-1.4.1-2.x86_64
[code]....
View 1 Replies
View Related
Mar 25, 2010
I have a 10x2tb disk array that i'm trying to build into a single software raid 5 i have tried this 2 times now the first it made it to 58.7% and the machine locked up and the array would not restart after a reboot. On my 2nd try all was looking good until about 50% i noticed that the speed dropped in 1/2 and that ksoftirqd/2 is taking up a lot of cpu (about 90%) the md0_resync and md0_raid5 are also taking 60-90% when the build started they took 7%. when i do a dmesg i see a lot of the message compute_blocknr: map not correct.
For a little info on the physical setup this is running on an Atom 510 with 2GB of mem the drives are connected to an addonics 4-Port RAID 5 / JBOD SATA II PCI Controller using the sil3124 chipset. I'm using 2 addonics 5X1 SATA Port Multiplier connected to the controller to get the 10 drives attached. All drive show up and don't seem to have any issues. I'm running a fully updated as of 3/20/10 version of centos 5.4
I will let this continue to run over night but i expect it to be locked up by morning if it follows what the last attempt did.
View 9 Replies
View Related
Feb 11, 2011
I have an init script running as a special build user which performs an automated build that fails with (Too many open files).I updated /etc/security/limits to allow the special user more open files, but that didn't work - the init script still isn't allowed more open files.Here's a demonstration of the problem;
Code:
$ su - sbsbuild -c "ulimit -n"
Password:
[code]....
View 1 Replies
View Related
Sep 16, 2010
Trying to install SW 13.1 (on DVD) on the following system: M/B Intel: DX38BT Processor Intel Core 2 Quad Q6700 - 2.66GHz, 8MB Cache, 1066MHz FSB, Socket 775 Memory Corsair Dual Channel 8192MB PC10600 DDR3 1333MHz Memory (4x2048MB) Graphics Diamond Radeon HD 3850 Video Card - Viper, 512MB GDDR3, PCI Express 2.0 P/S Ultra 1000W
My goal is to install the i386 build on one partition and the 64-bit build on another. I have been away from Linux for a while and am sick to death of Win7, want to come home. :-}
Booted on i386 side of DVD, system freezes after a couple of lines that start with ATA2. Does not respond to 3 finger salute, ctrl-c, nothing. Have to press reset. I have tried both huge.s and hugesmp.s kernels
Booted on 64-bit side, comes up fine. I performed the install, selected for automatic lilo install. Lilo install hung but I was able to reboot. I booted off the 64-bit side again, entered the following: huge.s root=/dev/sde3 rdinit= ro It booted fully to the login prompt but the keyboard does not work, no input.
View 2 Replies
View Related
Feb 27, 2011
I would like to build a bootable system image on an attached hard disk on a running CentOS machine.The hard disk would be moved to a headless server, where only SSH access would be available. It seems that all the documented install methods assume that the installation runs on the taget machine. In this case, I would like to create a bootable system image of CentOS on a running host system. The new install mage would generally have a newer version of CentOS than the running host system where the image is created. Also, I would prefer
to do a text-based install.
The reason for all this is that I have network access to several remote machines. I can ask disks to be moved between machines, but I have no physical access. In order to do software testing, I would like to have several system disks with different installed CentOS versions. It would be easer if I could build the system disks on one single machine. The hardware an all machines is very nearly identical.
View 1 Replies
View Related
Apr 19, 2011
Ant was installed in yast2 but will not run since build.xml was never created. How can this be fixed? I would like to run AudioTool.
View 5 Replies
View Related
Apr 13, 2009
I own a Pentium 4 server (no virtualization extensions). I installed CentOs 5.3 and Xen packages.I look for xen tools like xentop, xm... but they do not exist.This are the packages I installed on server:
xen-3.0.3-80.el5_3.2
xem-devel-3.0.3-80.el5_3.2
xen-libs-3.0.3-80.el5_3.2
[code]...
And a xend deamon is running on operating system (I saw it in a ps aux output).
View 1 Replies
View Related
Oct 28, 2009
i want to ask about "jot" i got this error : Quote: jot: command not found
View 1 Replies
View Related
Jun 22, 2010
During installation of set up its show g++ command not found and Failed! how can I install g++ .
View 2 Replies
View Related
Aug 30, 2010
I have installed tvtime in CentOS 5.5. I'm using a phillips tvtuner card saa7134. But when I modprobe saa7134, it says Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]# modprobe saa7134
FATAL: Module saa7134 not found.
[root@unknown0019d1b5e07a Desktop]#lspci | grep -i 'saa'
02:02.0 Multimedia controller: Philips Semiconductors SAA7130 Video Broadcast Decoder (rev 01)
View 1 Replies
View Related
