I was studying for RHCE exam,and the only problem I cant query these records from the same server Every time I dig myself it digs the ICANA example website But from anther computer it works fine
[Code]...
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies View RelatedI got CentOS 5.4 with LAMP. Installed Plesk, tried to configure it, and then error - Quote:Unable to restart Named: dnsmng failed: dnsmng failed: dnsmng: Service /etc/init.d/named failed to restart
View 7 Replies View Relatedi meet problem on named service, i want to configure my DNS with bind...after i /etc/init.d/named statusThis shows :"rndc: connect failed: 127.0.0.1#953: connection refusednamed is stopped"
View 2 Replies View Relateddon't find box of BIND so i was posting into this boxI have some problem when i config bind DNS for my domain and then i can't start named,this's error message
[root@server1 named]# service named restart
Stopping named: [ OK ]
Starting named:
[code]....
I have installed bind from the repos and am trying to setup a caching name server. After copying the stock name-cachinging.conf to named.conf, I tweaked named.conf to reflect my LAN:
options {
listen-on port 53 { 127.0.0.1; 192.168.1.102; };
listen-on-v6 port 53 { ::1; };
[code]...
I am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
OS CentOS 5.4 I have a DNS server that is logging all named and dns requests to the chrooted named directory. By default named logs to /var/log/messages but I want to isolate all the dns queries and requests to separate files. I know I can add entries to /etc/syslog.conf to "roll" the logs and logrotate should pick them up but fuzzy as to the syntax. I don't know what "tag" to use in the first fieild. for example
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none/var/log/messages
Here is the logging section of my named.conf
# pwd
# /var/named/chroot/etc
logging
{
[code]....
I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies View RelatedI updated bind to version bind-9.3.4-6.0.3.P1.el5_2 today, and then I started getting "Starting named: named: user 'named' unknown" messages. Selinux is enabled.
ID named shows:
uid=25(named) gid=25(named) groups=25(named) context=root:system_r:unconfined_t:SystemLow-SystemHigh
when I reboot the server with centos 5.5 the SMB deamon doesn't start?
View 2 Replies View RelatedI have just configured CentOS server my new office. This is the first time I am using CentOS.
Whenever I am trying to change the webroot of the httpd server, it usually say "directory doesn't exist". whereas which can't be the case as it is home directory of the user.
To achieve this, what Do I need to do?
The second issue, I am facing that whenever I am adding new directories to public_html folder, it is not accessible. as the error page 404 is shown. I have changed the permissions to 0705 and ownership is also transferred to other user. What else is required to make new directories accessible by the web?
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
I need to set up a named server for a class room with 10 imaginary hosts the sub domain managed by this name server is s123456.eca.edu.au where 123456 is to be replaced by your student id. The named server will forward unresolved queries to the dns server.
View 1 Replies View RelatedI configure named and stumble upon the following problem: named is serious about user rights, every config file named uses should be named:named. I set rights to named:named as follows, but they get changed to root:named when I restart named as root. The same thing happens with SELinux context. This results in access denied type errors.
View 1 Replies View RelatedI set up a DNS server, and it works fine when being queried from other hosts.But if I query it from localhost (by using nslookup), it reports error:
======================================
** server can't find www.example.com: NXDOMAIN
======================================
[code]....
I have been finding the solution of this problem from last 2 days but i am still unable to get a clue what's happening?I have a virtual dedicated server in godaddy with CENTOS5 operating system. The problem is occurring with the named service. It is becoming dead within 1 hour of starting it./named status gives named is dead but subsys is locked.The issue is their in google but it has no solution.Anybody have a idea what's going on ... i am fed up of starting teh named service again and again.
View 2 Replies View RelatedBeen hunting around and trying this for a few days now, without any success.I have configured a CentOS 5.5 box to start up named on boot. I have a Windows 7 machine currently going straight to the router for its DNS, that I want to point to this box instead.While I have done all the tests on the Linux box, and everything says it's working, my Windows 7 box just can't seem to contact the named service.While I am certain that my firewalls are configured correctly ( as I was able to connect through with Cyberkit on the other ports that are open ), I have even switched off the firewalls on both machines entirely to rule them out. And they still can't connect.
View 3 Replies View RelatedI replaced an old server (Fedora 3) with a new machine running CentOS 5.4. Unfortunately, I'm having some problems with "named".
Once in a while the "named" daemon crashes so hard, that I can't even restart it using
/etc/init.d/named restart
because the console freezes at "Shutting down named ...". I already waited for about 20 mins, but nothing happened. I cancelled the process using CTRL+C and typed "reboot" to restart the machine. After rebooting the "named" service works fine, but sooner or later it crashes again.
I also don't think it's a config problem, because I applied the "named.conf" from the former server where the whole "named" service worked fine and never crashed before. I'm a little confused, I also googled a lot nad could not find anything that exactly matches my problem. Is this a known problem?
I have a dedicated server running CentOS 5, Plesk 9.2.2, SMTP Postfix and Courier-IMAP.The issue I have is that on all domains on the server receiving email works fine however sending email never seems to work. This is from email programs, my phone, webmail and PHP. None of them seem to be able to send email. If it is of worth Spam Assassin is running however I don't feel it is causing any problems.
View 7 Replies View RelatedIs there something that blocks cron from running a shutdown command? I'm doing a daily bounce to break an attack (I have thread about that in security forum), but I always end up doing it manually. The cron log shows it being fired off at the right time...but the server never bounces. I thought maybe I just missed it, but there is nothing in messages that shows the server restarting (unlike when i do it manually, you see the start-up logging).
View 2 Replies View RelatedMy DNS server used to work flawlessly but for some reason it no longer responds to queries. It seems that named always queries internet root serves!!
View 3 Replies View RelatedI'm running CentOS 5.3 64bit and from the get go I've had problems with the Apache server.More specifically, on what seems to be a random occurance, the apache server stops to respond.The process is still running, but nothing happens with it, and it is not responding.The /var/logs/httpd/error_log is blank for the occurance and only shows an entry after I give it a restart.So I'm a bit confused about what is going on.With that said, I need to make sure the httpd is working one way or another.I don't want to force a restart service every 10 minutes as this seems a bit too much.However, I do want to have the following:
run a crond every minute to do:If it fails, then do service httpd restart (and log the failure and restart to a file and email me a message).Any pointers on how to do that?It ain't the pretty solution, but it will save me from a very angry user until I'll figure what is the real cause for this failure.
Trying to migrate our news server to a new instance on centos5 and having issues with the makehistory utility. It errors out and then just creates all null values for the overview database. Here is the output:
[root@server overview]# /usr/lib/news/bin/makehistory -O -x -F
*** glibc detected *** /usr/lib/news/bin/makehistory: free(): invalid pointer: 0x000000000063ce60 ***
======= Backtrace: =========
[Code].....
this might not be a Centos related issue, but since I'm using Centos I guess it doesn't hurt to ask; I've used Ubuntu before and haven't encountered this. So, I've just installed Centos and Webmin and now I'm trying to configure the server. Problem is that on the Apache configuration page I don't have the option (should be there) to configure the Apache modules. I've attached a file to show where the modules option should (as before) appeared.
View 6 Replies View Relatedtrying to configure a Centos 5.5 server (simple file server with DHCP and DNS relay). I configured and tested the config (by 'service dnsmasq configtest') of dnsmasq and I got the message 'dnsdomain:host unknown (translation of the real message : hte inconnu) and I didn't find where I could define this host ! The hostname of the server is well defined and I can see it from all Windows PC's on the LAN. dnsmasq starts (with hte same message as in configtest) but when querying DNS from PC's te.g. trying to surf the Internet), I don't get replies (3 DNS servers are also well defined and operational).
View 2 Replies View RelatedI've got Samba server running on CentOS box. Everything works fine when I use "path" parameter, but I think Samba should create /home dirs for clients automatically. It should look like this:
comment = Home Directory of '%u'
valid users = @"Domain Group"
browseable = no
writable = yes
[Code]....
When I explicitly declare "path" param, it works ok. But I need PERSONAL home dir for every user separately, not one dir for everyone.
i have been trying to complete the following project1) Configure a FTP server where we can upload and download files.........2) server must run at 9 pm & stop at 9 am automatically ............although the first task was easy ,i have no idea how to accomplish the 2nd task(not to mention I'm a new user)
View 5 Replies View RelatedI've been trying to make install apache 2.1.8 and php 5.2.3 and work on them. After updating and installing some dependence files, apache and php could both be installed.
Then I tried to configure them. I added the following content to the end of Apache httpd.conf:
Code:
Then I run /path/to/apachectl start, and saw the message:
Quote:
Invalid command 'RewriteEngine', perhaps misspelled or defined by a module not included in the server configuration
Then I remembered that I didn't include the rewrite module while making install apache. So I removed the 2 lines I just added to httpd.conf.
But, after running /path/to/apachectl stop and start again, I could still see:
Code:
When I use firefox to open http://host_ip:8080/, I could see "It works!". But when I open http://host_ip:8080/hello.php (the file is already under htdocs), firefox said
Quote:
Failed to Connect
Why and how to solve it?
I noticed that for some stupid reason, the conf file wasn't updated at all and the 2 erroneous lines were still there.
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View Related