Server :: Windows 7 Cannot Query Named DNS Server
Aug 17, 2010
Been hunting around and trying this for a few days now, without any success.I have configured a CentOS 5.5 box to start up named on boot. I have a Windows 7 machine currently going straight to the router for its DNS, that I want to point to this box instead.While I have done all the tests on the Linux box, and everything says it's working, my Windows 7 box just can't seem to contact the named service.While I am certain that my firewalls are configured correctly ( as I was able to connect through with Cyberkit on the other ports that are open ), I have even switched off the firewalls on both machines entirely to rule them out. And they still can't connect.
View 3 Replies
ADVERTISEMENT
Oct 29, 2010
I set up a DNS server, and it works fine when being queried from other hosts.But if I query it from localhost (by using nslookup), it reports error:
======================================
** server can't find www.example.com: NXDOMAIN
======================================
[code]....
View 5 Replies
View Related
Jun 16, 2010
I'm trying to setup a linux box to act as just a DNS server. Its something I'd like to use just for WAN type requests and leave other domain related things to the Server running WIndows.At this point on my Linux box, I can run queries and nslookups from it. I can not however, from a Windows box, run a NSLOOKUP command from the Linux box which is telling me to check the permissions from Linux to enable that for the clients. It's enabled.From a C: I type in nslookup - *ip of Linux box* and it tells me -- Can't find server name for address.
View 4 Replies
View Related
Apr 1, 2011
I am using Cent OS 5.5 and i want configure DNS, but while configuring bind i am getting below error.
#/etc/init.d/named restart Stopping named: [ OK ]
Starting named:
Error in named configuration:
/etc/named.conf:57: open: /etc/named.root.hints: file not found[FAILED]
View 2 Replies
View Related
Feb 19, 2010
The issue is that my CentOS workstation is in a vlan from where the Intranet's DNS servers are unreachable. For browsing the web there is an ISA proxy server, which I presume resolves DNS for my firefox. However, wget, host, ping and aria2c fail to get any sort of DNS resolution since they're being run from command line.I have exported HTTP_PROXY value, which provides me internet access on console, but,only when I connect using IP address. It fails on name resolution.
My question is:May I redirect the DNS queries to my home PC which would be running a DNS server on a non standard port?I was thinking of putting nameserver 127.0.0.1 in /etc/resolv.conf and then put iptables rule to redirect 127.0.0.1:53 UDP to a.public.ip.address:3535 UDP..I don't know if I am shooting blanks or what, I am not very much aware of this kind of setup.My main need is to provide DNS resolution to console apps.I want to utilize my company's idle bandwidth for bulk downloads, so, using proxy, SSH tunneling through my Home PC is out of question.
View 8 Replies
View Related
Dec 7, 2010
I and setting up a home web server using Ubuntu 10.04 server (local only). I am currently using Webmin 1.53 to access it remotely all is going great very easy to use. Webmin - Check, ftps-fileZilla - Check, Apache -It Works BUT I cant seam to set up Apache as a named server using Bind DSN. Tried most of the help in the fourms and ..... I think my problems is in the master server selection, do i have to use [URL]... or can i just use myservername. I have tryed both with no luck. First time with the server addition.
[code]...
View 6 Replies
View Related
Mar 30, 2011
I need to set up a named server for a class room with 10 imaginary hosts the sub domain managed by this name server is s123456.eca.edu.au where 123456 is to be replaced by your student id. The named server will forward unresolved queries to the dns server.
View 1 Replies
View Related
May 5, 2010
I have been finding the solution of this problem from last 2 days but i am still unable to get a clue what's happening?I have a virtual dedicated server in godaddy with CENTOS5 operating system. The problem is occurring with the named service. It is becoming dead within 1 hour of starting it./named status gives named is dead but subsys is locked.The issue is their in google but it has no solution.Anybody have a idea what's going on ... i am fed up of starting teh named service again and again.
View 2 Replies
View Related
Jun 17, 2009
I was studying for RHCE exam,and the only problem I cant query these records from the same server Every time I dig myself it digs the ICANA example website But from anther computer it works fine
[Code]...
View 1 Replies
View Related
Oct 28, 2009
i've made a big update of almost 300Mb.I'had a working DNS server.Now, when i boot the box, named works and it resolves all the clients.If i make any change (enter a new client for example) and of course i restart named (service named restart), named stop but does not start again !!!In order to get a working named, i 'm obliged to reboot the box?
View 6 Replies
View Related
Aug 4, 2010
I configured ldap server & client on centos,then i connected centos and suse with network.now want to get group of any user from this server via suse.is it possible with perl scripts? or i need to install other modules on suse or centos?(such as : pam,nss)
View 8 Replies
View Related
Jan 4, 2010
I am working one project and i want to know that is it possible to find out the DNS (BIND) QPS (query per second). I mean how many QPS BIND can handle.
View 2 Replies
View Related
Nov 4, 2010
i have a server which was handover me, it has redhat 4 u3.but i cant find the machine model no, it is hp g4 server, so this info from linux where can i see
2nd if i want to know what is the bios version and date how can i see from linux.
3rd if any hardware failing like network card, ram memory, hard disk how we come to know hardware.
View 5 Replies
View Related
Jan 28, 2010
i have MySQL on my CentOS server and have installed it and got it up and running through the command line.
I have changed root's username and password so there is no user called 'root' anymore. I also created a database called pancakes.Now when i try to log in using Query Browser, i put the server's IP in 'hostname', my new roots username and password in 'username' and 'password'.When i try to log in it gives me error 1130 and says connection from myhostname not allowed.
View 6 Replies
View Related
Jul 12, 2010
There is a partnering website that provides an RSS feed to display on the website I am working on. The website displays information on the feed every time a user accesses the website. The feed changes almost every day. For bandwidth considerations and speed, I would like to download the feed once by the server using a crontab job (my website is in a linux shared hosting environment). The problem exists with the URL structure, which I have no control over.
Here is the URL:
Code:
[code]....
I am aware that there are characters that need escaping and this is where I am getting my errors. I have never written a shell-script but I am also assuming some of the characters are keywords in the Shell Scripting language or Linux I am also aware that I can avoid having to escape by enclosing the URL with single or double quotes. You will notice that the URL has BOTH single and double quotes, so its not as simple.
View 1 Replies
View Related
Feb 23, 2010
My DNS server used to work flawlessly but for some reason it no longer responds to queries. It seems that named always queries internet root serves!!
View 3 Replies
View Related
Aug 18, 2010
i want to limit bw for each session/user in ftp server. can anyone help me how to do this. i am using cent os and vsftp.
View 1 Replies
View Related
Dec 30, 2010
I have a ClarkConnect (CentOS based) box running as my home router on a RR connection. I had the DNS servers set up to use Google's DNS server. I want to change them back to the local DNS servers but I can't find an obvious/easy way to get those address short of a) reconfiguring the router's network to DHCP them (would rather not interrupt everyone) or b) calling their tech support (kill me now!). Is there a command line tool/command I can use to query the DHCP server on the external NIC to see what DNS servers it would set me up with w/o munging my existing setup?
View 1 Replies
View Related
May 19, 2010
We've got crontabs set up in /etc/cron.d to run various things, and we have them running as a specific local user.
Watching the LDAP logs, I can see the servers in question making requests for that username to the LDAP server every time cron runs, even though that user isn't in LDAP and is only local. nsswitch is configured to do "files ldap" as well.
The constant stream of LDAP queries is killing LDAP and making it impossible to log into our boxes.
why cron is querying LDAP for a local user?
View 1 Replies
View Related
Mar 8, 2010
I have installed mysql package in ubuntu 9.04 .I have also installed the query browser software can someone tell me how to configure the connection dialogue box in query browser. also my friend is using ubuntu 8.04 when he writes mysql in terminal he can directly execute database queries there but when i try the same thing on 9.04 i get an error as "Access denied for user 'ravi'@'localhost' (using password: NO)"
View 1 Replies
View Related
Apr 29, 2010
I got CentOS 5.4 with LAMP. Installed Plesk, tried to configure it, and then error - Quote:Unable to restart Named: dnsmng failed: dnsmng failed: dnsmng: Service /etc/init.d/named failed to restart
View 7 Replies
View Related
Oct 9, 2010
i meet problem on named service, i want to configure my DNS with bind...after i /etc/init.d/named statusThis shows :"rndc: connect failed: 127.0.0.1#953: connection refusednamed is stopped"
View 2 Replies
View Related
Dec 20, 2010
don't find box of BIND so i was posting into this boxI have some problem when i config bind DNS for my domain and then i can't start named,this's error message
[root@server1 named]# service named restart
Stopping named: [ OK ]
Starting named:
[code]....
View 1 Replies
View Related
May 18, 2010
I am busy learning shell scripting, and I managed to get my first few right, but now I am trying to do something that I know how to do in Windows, but not in Linux. Basically, during a file copy, I want to create a new date for each folder on a daily basis to copy backups into.so, in windows the syntax would be "xcopy %systemroot%ackupslah.blah \servernameackups\%date%"in linux I am running a "cp blah.gz /mount/blah" I want to create a folder with the date based on the current date.anyone know how to get the same right in shell script?
View 10 Replies
View Related
Jan 18, 2010
I have an access database and I would like to build a website on the slackware 12.2 server running apache 2.11.14 to let users query data from the MS Access database. I am thinking that I could just do it in jscript and make a jdbc connection and that should be good. What do you guys think.
View 2 Replies
View Related
Sep 3, 2010
How do I know the reply was from caching-nameserver, master nameserver or slave nameserver in BIND DNS.? Can I trace the nameserver that replied my dns query? Like I have a master nameserver, a slave nameserver and a caching nameserver in my network. Is it possible to know that which of these servers replied my dns query? Also can i trace back that replying server exactly?
View 3 Replies
View Related
Aug 23, 2009
I have installed bind from the repos and am trying to setup a caching name server. After copying the stock name-cachinging.conf to named.conf, I tweaked named.conf to reflect my LAN:
options {
listen-on port 53 { 127.0.0.1; 192.168.1.102; };
listen-on-v6 port 53 { ::1; };
[code]...
View 2 Replies
View Related
May 14, 2010
I recently turned on query logging on our name server and immediately saw repeated queries for . (dot). I've not seen this before. It looks like a really sloppy DOS. What would this return if my NS was misconfigured?
May 13 18:11:41.710 queries: info: client 91.202.63.129#56089: query: . IN NS
May 13 18:11:42.083 queries: info: client 91.202.63.129#62826: query: . IN NS
May 13 18:11:42.788 queries: info: client 91.202.63.129#13620: query: . IN NS
[code]....
View 2 Replies
View Related
Mar 1, 2010
OS CentOS 5.4 I have a DNS server that is logging all named and dns requests to the chrooted named directory. By default named logs to /var/log/messages but I want to isolate all the dns queries and requests to separate files. I know I can add entries to /etc/syslog.conf to "roll" the logs and logrotate should pick them up but fuzzy as to the syntax. I don't know what "tag" to use in the first fieild. for example
# Log anything (except mail) of level info or higher.
# Don't log private authentication messages!
*.info;mail.none;authpriv.none;cron.none/var/log/messages
Here is the logging section of my named.conf
# pwd
# /var/named/chroot/etc
logging
{
[code]....
View 5 Replies
View Related
Oct 12, 2010
I meet this problem after i reformat the CentOS 5...I havent do any configuration, the named service start failed ? why ....
View 2 Replies
View Related
