CentOS 5 :: Opera Unite On CentOS 5.3 - Getting Error / Fix This?
Jun 17, 2009I just installed opera unite on my machine and get this error. Can anyone tell me what this might be? code...
View 12 Replies
ADVERTISEMENT
CentOS 5 Hardware :: Error Installing CentOS 5.2 On ICH7R With 4 SATA HDDs RAID 5?
Feb 15, 2009The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies View RelatedCentOS 5 :: Booting CentOS V5.2 Fails With GRUB Error 13: Invalid Executable Format?
May 5, 2009I'm trying to install a dual booting machine with OpenSUSE v11.1 32bit and CentOS v5.2 64bit. I installed OpenSUSE first and allowed it to install and configure grub in the MBR and after that I wanted to proceed with CentOS v5.2. The installation went fine with two notable exceptions:- when I had to configure grub installation parameters, CentOS offered me only 2 solutions: either install it on the MBR of the first hard disk or not installing it at all. Other distributions are more flexible allowing you to install it in the boot sector of the root partition for example. Because I didn't want to ruin the existent grub onfiguration, I reluctantly accepted not to install it for CentOS assuming that I could manually configure the entry later in grub's menu.lst file.
- when I was presented with the options for software components installation, I've clicked on virtualization category/function because I intend to use the machine as a VMware host. There was no guidance on screen at that point and I blindly assumed that by choosing the virtualization function I would get necessary tools and drivers that will help me further on. It seems that this was a wrong move as you can see it below.
After completing the installation, I tried to search for a template or guiding on how the menu entry in menu.lst should look like but the grub directory was empty, not surprisingly because I've told CentOS earlier not to install it. Using the files in the /boot directory from the CentOS installation I tried to improvise a menu entry but it's not working. The boot stops with famous Error 13: Invalid or unsupported executable format. Using the file command to check what kind of files I'm trying to load as kernels I'm getting :
marte:~ # file /mnt/vmlinuz-2.6.18-92.el5xen
/mnt/vmlinuz-2.6.18-92.el5xen: gzip compressed data, from Unix, last modified: Tue Jun 10 19:20:51 2008, max compression
[code]....
CentOS 5 :: Succeed To Install Vmware Workstaion 7.1 On Centos 5.5, But Have Run-time Error?
Jul 2, 2010[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
CentOS 5 Server :: VsFTP Iptables Wont Start Get Error - CentOS 5.5
May 11, 2011i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
CentOS 5 Server :: Mysql.X86_64 V5.0.77 On CentOS 5.3 ERROR 1045 (28000): Access Denied
Oct 21, 2009This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
CentOS 5 :: Error Installing Mod_ssl On Centos 5.7. A Package Conflict
Sep 23, 2011Error installing mod_ssl on centos 5.7. Do not install the mod_ssl module says there is a package conflict, some way to fix it?. is a 64-bit
[Code]...
CentOS 5 :: System-config-kickstart Error In CentOS 5.3?
Apr 10, 2009I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
CentOS 5 :: Wine Installation Error In Centos / Solution For This?
Dec 4, 2009I download the xxxx.tar.bz2 file
extracted it,
when i run ./configure under the directory i get the following error code...
i even followed the link http://wiki.winehq.org/WineOn64bit
also http://forum.winehq.org/viewtopic.php?p=28622&sid=17383eb0b922b2c230238f9ab50b265a. and several googling.
i think the architect of the OS and the wine is not matching.
So guide me to solve the above problem.
the output i get on "uname -i"
x86_64
CentOS 5 :: Installing CentOS 5.5 On An Old PC -- Query On An Error Message?
Oct 24, 2010I'm trying to install CentOS 5.5 on an old Pentium 4 desktop PC I have, which is not being used for much other than being a MTA, and I want to migrate this functionality onto the CentOS platform for stability (Windows is a perpetual nightmare. I partitioned a spare 20GB to experiment with, and I want to install CentOS into here to play around with first so I can move my files around between Windows and CentOS, until I'm happy all of the stuff is gone, then I can scrub the Windows partition and claim the space for CentOS.
So, I've downloaded and burned the DVD and tried to install. I start the install with no args from the main install menu, and the process goes through some probing and then comes up with the "Welcome to CentOS" menu. I go through this, and then it tries to start X Server. It fails, and falls back to text mode. I get the "Welcome to CentOS" screen again, and then proceed through it. I set my keyboard layout to UK, then this message comes up at the bottom of the screen:
"_X11TransSocketINETConnect() can't get address for localhost:6001: Temporary failure in name resolution"
then on the next line: "Cannot open display :1" If I force the install to text, by typing "linux text" at the first menu, I get about the same way through, but the install just hangs doing nothing, and no disc access to the install disc.
CentOS 5 :: Error 'noapic' When Start Centos?
Apr 8, 2009i restore Centos from backup file,after i have finished,i start centos, it can't start and repost error: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option
View 11 Replies View RelatedCentOS 5 :: Error Login In VSFTPD. CentOS 5.5
Feb 3, 2011I installed VSFTPD but when logging ( at command line or browser ) at any user always :
[root@srv vsftpd]# ftp 172.16.0.3
Connected to 172.16.0.3.
220 (vsFTPd 2.0.5)
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
Name (172.16.0.3:root): system
[Code]...
CentOS 5 :: PHP 5.2 And Centos 5.2 - Install Error
Feb 13, 2009When we try to install the php 5.2, it try to install mysql-libs 5.2 that confilict with files from previous mysql installation. We have tryed all kinds of methods found off google and no luck.
Transaction Check Error: file /etc/my.cnf from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/Index.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/README from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5
file /usr/share/mysql/charsets/ascii.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5 file /usr/share/mysql/charsets/cp1250.xml from install of mysql-libs-5.1.31-1.el5.remi conflicts with file from package mysql-5.0.45-7.el5
[Code]...
CentOS 5 Server :: Centos And Xen: Lan Error - Vif0.0: Received Packet With Own Address The Source Address
Jun 18, 2010I installed the Centos 5.5 and after the Xen. After I put a virtual machine named VM01.Initially it worked properly, I tried everything and it worked.When rebooted, I had problems with the network.I have two network cards eth0 and eth1, but eth1 does not have any ip and I use only eth0.The error that appears is:
vif0.0: received packet with own address the source address
CentOS 5 :: CentOS 5.5 Start Error On Xen DomU "Installation Not Started" ?
Dec 22, 2010I installed CentOS 5.5 x86_64 on server as xen dom0. When i try to install CentOS 5.5 x86_64 as guest (hardware virtualization) i see "Kernel panic"...Installation not started: i see install cd's boot menu, press Enter... that's all.
Dom0 kernel: 2.6.18-194.26.1.el5xen, xen 3.0.3
Only standart installation, repo's and update's...
Code: 8b 72 40 48 8d 4c 24 1c 48 8b 7a 20 ba c4 01 00 00 e8 5f 77
RIP [<ffffffff8008192f>] cpuid4_cache_lookup+0x256/0x356
RSP <ffff81010fc75d60>[code]....
CentOS 5 Server :: Compiling Error Mod_ruby-1.3.0 On Centos 5.3 Server (with Howtoforg)?
Jun 1, 2009I have a problem with compiling of mod_ruby-1.3.0 After a succesfull configure i get a error in the make, it say "make: *** [apachelib.o] error 1" . Here below you can find the results of de configuring and the make.I was following the roles in Howtoforge " The perfect server - Centos 5.3" everything goes perfect till mod_ruby-1.3.0
./configure.rb --with-apr-includes=/usr/include/apr-1
checking for a BSD compatible install... /usr/bin/install -c
checking whether we are using gcc... yes
[code]....
CentOS 5 :: Installation Of Guest CentOS 5.5 DomU On Centos 5.5 Xen Dom0?
Aug 4, 2010Problems with xen 3.1.2 creating and installing domU CentOS 5.5 I am trying to do a virt-install --prompt --paravirt, and the install error out while trying to download install RPMs. I have googled for xen centos virt-install and various permutations. I have found similar howtos for 5.4 and 5.3, but they resulted in the same outcome. I did find several posts with similar issues, but no solution was posted.[URL]..
View 4 Replies View RelatedCentOS 5 :: Centos 5.5 X86_64 Or Centos 5.5 I386 - Difference Between The Two Versions?
Feb 9, 2011I am in the process of building a new server on an Asus P5QPL-AM motherboard and an Intel E8600 processor.explain to me the difference between the two versions and what would you recommend.Also, is there any advantage of SATA over IDE hard drives?
View 1 Replies View RelatedUbuntu :: Awesome Or Tiling WM Users Unite
Dec 11, 2010So who here also uses awesomewm, or a tiling window manger? I've been using awesome for about 6 months at home, and started using it recently at my new job on my desktop at work. Whether it's at work or home, I've noticed that a tiling WM has increased my productivity 10 fold. I'm able to organize everything by tag, then tile. With awesomewm I have come to love it's reliainace on the LUA language. If I need a new feature, I can add it pretty easily. i.e. I have created custom prompts with some scripting to rdp and ssh into box's with the login information, resolution, already inputed.
Put in some if/else in there also, for certain hostnames that require different credentials, or different settings. It also mounts the c$ or root drive once connected to my /ticket/##### directory. So it's a snap to copy any file over. With LUA I've been pretty much able to extend the window manger to my needs with any script I can imagine. So come on everyone, discuss! Whether you are using awesomewn, or dwn or another great tiling window manager. Post your code, your settings, lets make this thread as big as the conky thread.
Debian Configuration :: Error In Opera Update From Repository
Jul 2, 2010I've got Opera for Linux on my Debian Lenny system, installed by adding their repository to my APT config, and it works great. Just recently there was an update. When I downloaded it, it could not install because the signature could not be verified.
W: GPG error: [url] lenny Release: The following signatures couldn't be verified because the public key is not available: NO_PUBKEY F9A2F76A9D1A0061
Why would that happen now when I already had the repository correctly setup in my apt files? I tried re-installing the key and that didn't change anything. Is there a problem with a public key server somewhere?
OpenSUSE :: 11.2 Gnome - Error Installing Opera Browser
Apr 1, 2010When I've downloaded it it says:
The name org.freedesktop.PackageKit was not provided by any .service files
I'm on suse 11.2 gnome, 64bit.
Ubuntu :: Installing Opera - Dependency Not Satisfiable Error
Mar 19, 2010I've just installed ubuntu and wanted to give it a go. However trying to download and installing my favorite browser I get an error: Error: Dependency is not satisfiable: libqt3-mt (>= 3.3.4) im downloading the default package, and ran the package install thingy. I googled around trying to find a solution, but I found mostly for older versions of ubuntu and dont know if they apply to my problem. I also tried some tips I found running a command with something like sudo apt-get install libqt3-mt. then i end up with this response:
E: Couldn't find package libqt3-mt
CentOS 5 :: Setting Up SVN On A Box - 403 Error
Feb 12, 2009I am trying to set up a SVN server on my centos box.
I have my box set up to do ssh/samba
I need to set up SVN but when I followed [url]
I get a 403 error.
CentOS 5 :: Yum Error After Upgrade To 5.3
Apr 19, 2009Setting up Update Process
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 229, in user_main
errcode = main(args)
[Code]....
CentOS 5 :: How To Clear Error
Aug 13, 2009I need to clear the following error after trying to upgrade with yum. code...
View 1 Replies View RelatedCentOS 5 :: Error Update 5.3 To 5.4
Oct 22, 2009I updated from centos 5.3 to 5.4 and the update is left hanging in the update for tog-pegasus. I updated the other packages but I resist, I can do?
I think the problem is the dependence of cluster-cim but I'm not sure ..
CentOS 5 :: Dependency Error - 5.4
Jan 26, 2010I am having dependency problems.
I am using all of the official centos5 repos except "plus".
I am using the stable repos of rpmforge and ATRPMS.
When I use su -c 'yum update'
I get the following dependency errors:
As far as I can tell, the errors are coming from one or both of the 3rd party repos.
I am using the yum plugin priorities:
Here is that info:
CentOS 5 :: Error Yum Update "Error: Cannot Find A Valid Baseurl For Repo: Rpmforge"
Jul 30, 2009after changing in the server the network configuration of DHCP to have an IP set, every time I run yum update I get the following error:
Error: Cannot find a valid baseurl for repo: rpmforge
And I noticed that every time you reboot the server the file resolv.conf is erased
CentOS 5 :: Getting Error In 500 Apache Error Log?
Jun 22, 2011I am unable to run perl script.When i am trying to run it.It shows following error in Apache error log- [Wed Jun 22 14:05:11 2011] [error] [client 172.16.237.128] Premature end of script headers: webrebase101.cgi
Below is the script which i am trying to run:
#!/usr/bin/perl
use Restrictionmap;
use Rebase;
use SeqFileIO;
[Code]...
Server :: Unifying Permissions Between Two Servers - CentOS - Webmin/CentOs - Cpanel - And Rsync
Jan 1, 2010I have two servers, both running CentOS, but one running Cpanel as the control panel and the other running Webmin.
I would like to sync the web folders using rsync. However, when I sync the files from the Cpanel host the permissions look as follows:
Code:
But that doesn't work on the Webmin server which needs the following:
Code:
It seems the Cpanel install has the group as 'nobody' whilst webmin has it the same as the file owner. I can fix this by running:
Code:
But as the file transfers will be frequent, I don't want the files to be inaccessible until chown is run.
So, what I really want to know is - how can I change things on the 'webmin' server so that files with ownership owner:nobody will run?