Setting up Update Process
Traceback (most recent call last):
File "/usr/bin/yum", line 29, in ?
yummain.user_main(sys.argv[1:], exit_code=True)
File "/usr/share/yum-cli/yummain.py", line 229, in user_main
errcode = main(args)
[Code]....
CentOS release 5.3 (Final)
2.6.18-128.el5
I keep getting the following error when I try and yum upgrade a package.
# yum upgrade subversion
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
http://mirror.centos.org/centos/5/os/i386/repodata/repomd.xml: [Errno 12] Timeout: <urlopen error timed out>
Trying other mirror.
Error: Cannot retrieve repository metadata (repomd.xml) for repository: base. Please verify its path and try again
I can't make the upgrade..... I've see the dettails and this is what is write: file /usr/lib/perl5/vendor_perl/5.8.8/Compress/Zlib.pm conflicts between attempted installs of perl-Compress-Zlib-2.015-1.el5.rf.noarch and perl-IO-Compress-2.030-2.el5.rf.noarch file /usr/share/man/man3/Compress::Zlib.3pm.gz conflicts between attempted installs of perl-Compress-Zlib-2.015-1.el5.rf.noarch and perl-IO-Compress-2.030-2.el5.rf.noarch
View 1 Replies View RelatedI keep getting the following msg as I try to upgrade from 10.04 -> 10.10 ... "Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: E:Error, pkgProblemResolver::Resolve generated breaks, this may be caused by held packages. This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report." I don't think any of the issues above apply - can anyone offer advice on how to get around or "force " the upgrade
doing an upgrade from 10.4 to 10.4 LTS and got this error:
Could Not Calculate Upgrade
An unresolvable problem occurred while calculating the upgrade:The package 'skype' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
If none of this applies, then please report this bug against the 'update-manager' package and include the files in /var/log/dist-upgrade/ in the bug report.
I have an intel DP35DP motherboard - ICH9 southbridge - set to AHCI mode. Working fine under 5.2. Yesterday I updated to centos 5.3, and got kernel 2.6.18-128.1.16 and now it can't boot. It hangs trying to read sata1 with DRDY errors and exceptions.So then I installed 5.3 from a DVD onto a new drive, and got kernel 2.6.18-128. This worked, most of the time, but occasionally gave me this error. I then updated my BIOS, and the error went away.Then I updated this new working drive to the latest kernel (yum update again) and got kernel 2.6.18-128.1.16, and now it wont boot again, with the same message.
ata1: failed to read log page 10h (errno=-5)
ata1.00 exception Emask 0x1 SAct 0x1 SErr 0x0 action 0x0
ata1.00: irq_stat 0x40000008
ata1.00: cmd 60/08:00:61:4b:38/00:00:3a:00:00/40 tag 0 ncq 4096 in
ata1.00: status: { DRDY }
ata1.00: revalidation failed (errno=-2)
ata1.00: revalidation failed (errno=-2)
[Code]....
have all ways been hiding in the background read not say a thinglets start well i look after 2 dell poweredge 2650 with 12 gig ram installed servers has been running fine onwell i though it was time to upgrade to 5 all went fine till reboot Memory for crash kernel (0x to 0x) not within permissible range ! well what i have been reading this is the norm for now What is mean by ignore it? LoLwell so i did the system keeps boot till i get to this linesbin/mingetty: /sbin/mingetty: cannot execute binary file alot, and it shows. INIT: Id "5" respawning too fast: disabled for 5 minutes ...so maybe its a memory issue so took 8 gig out left 4 in the system now it reboot alls good with only 4 gig of ram installed so is there a way to fix it to use all the ram can i get the system boot on 4 gig and then add the 8gig later on
View 7 Replies View RelatedI make upgrade from CentOS 5.4 to CentOS 5.5. Architecture is historical i386. On first boot my system was freezed by disabled earlier but not removed manualy writed xdm service. I disable it. But not found network. I see hardware address of card fe:ff:ff:ff:ff:ff. This address is not normal. But how to restore eeprom of this network adapter?
I don't think its trouble of new CentOS. I think this is random incident.Configuration of computer is Intel D510MO motherboard with integrated atom processor and realtek 8111dl nic. I know some trics about fix mac address in centos, but how to fix this address in bios?
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
I have installed CentOS 5.2, apache tomcat 5 already included, How can I upgrade tomcat to version 6 ?
View 1 Replies View RelatedI have encountered the same problem as indicated in this post: "udev hang after upgrade from 5.3 to 5.4"[URL]... I'm testing the upgrade path to centos 5.4 on several virtual machines prior to upgrading our production systems. I have upgraded centos 5.2 --> centos 5.4 and centos 5.3 to centos 5.4. In both cases udev hangs after the upgrade. The following message is displayed on the console: "Starting udev: Wait timeout. Will continue in the background [FAILED]"
I found another related post: "udev hangs on boot for a long time, suspect pam_console_apply"[URL]..So, I booted by VMs using the "udevdebug" option to grub and received the same error message - "udevd-event [###]: run_program: Waiting ## seconds for output of '/sbin/pam_console_apply /dev/..."
In my /etc/ldap.conf file "bind_policy hard" is commented out. I added a line "bind_policy soft" as described in the post and my VMs booted fine. NOTE: This problem is not encountered with a fresh install of CentOS 5.4 and the "bind_policy hard" option in the /etc/ldap.conf is commented out as in the upgraded systems. What is really causing this problem and how do I get it addressed? I have a couple hundred systems to update from various releases of CentOS 5 to the latest current version 5.4. It would be nice to get this bug squashed..
[Code]...
there is a bug on the quad core B2 opteron cpu there is a beta patch available , but only for for 2.6.24 kernel i am very happy with my centos, and i would upgrade the kernel to try this patch i am new on linux, so i need a precise tutoriral to upgrade and keep the actual configuration of the kernel
View 2 Replies View RelatedI can't upgrade. I get: Quote: Could not calculate the upgrade An unresolvable problem occurred while calculating the upgrade: The package 'skype-common' is marked for removal but it is in the removal blacklist.
This can be caused by:
* Upgrading to a pre-release version of Ubuntu
* Running the current pre-release version of Ubuntu
* Unofficial software packages not provided by Ubuntu
This is most likely a transient problem, please try again later. I tried again several times in different days and it is the same. I have 10.4 recently updated from my original installation of 9.10. I think it was not a pre-release, I did it automatically from the website and it took a long time. As far as I know, all I have installed is official, except perhaps Skype itself.
The installer can't see my raid controller (I assume) as I'm getting the following error:"Error opening /dev/mapper/isw_jbhgjgjj_Vol0: No such device or address"It just sees them as 4 individual drives: sda, sdb, sdc and sdd.Please note that I have set up the RAID 5 in the controller bios interface and the image name is Vol0, which it seems that it tries to load but for some particular reason it can't.I have also tried different bios settings and nothing worked.
View 3 Replies View RelatedI'm trying to install a dual booting machine with OpenSUSE v11.1 32bit and CentOS v5.2 64bit. I installed OpenSUSE first and allowed it to install and configure grub in the MBR and after that I wanted to proceed with CentOS v5.2. The installation went fine with two notable exceptions:- when I had to configure grub installation parameters, CentOS offered me only 2 solutions: either install it on the MBR of the first hard disk or not installing it at all. Other distributions are more flexible allowing you to install it in the boot sector of the root partition for example. Because I didn't want to ruin the existent grub onfiguration, I reluctantly accepted not to install it for CentOS assuming that I could manually configure the entry later in grub's menu.lst file.
- when I was presented with the options for software components installation, I've clicked on virtualization category/function because I intend to use the machine as a VMware host. There was no guidance on screen at that point and I blindly assumed that by choosing the virtualization function I would get necessary tools and drivers that will help me further on. It seems that this was a wrong move as you can see it below.
After completing the installation, I tried to search for a template or guiding on how the menu entry in menu.lst should look like but the grub directory was empty, not surprisingly because I've told CentOS earlier not to install it. Using the files in the /boot directory from the CentOS installation I tried to improvise a menu entry but it's not working. The boot stops with famous Error 13: Invalid or unsupported executable format. Using the file command to check what kind of files I'm trying to load as kernels I'm getting :
marte:~ # file /mnt/vmlinuz-2.6.18-92.el5xen
/mnt/vmlinuz-2.6.18-92.el5xen: gzip compressed data, from Unix, last modified: Tue Jun 10 19:20:51 2008, max compression
[code]....
[URL]VMware Workstation 7.0.1 Release Notes has a list of supported OS:[URL]According to that, RHEL 5.4 is listed as supported for both host andguest but CentOS 5.4 is only for guest. This is quite strange and, ifit is true, that could be a serious issue.I succeed to install vmware workstaion 7.1 on centos 5.5, but have run-time error:
[root@ ~]# /etc/init.d/vmware start
Starting VMware services:
VMware USB Arbitrator [ OK ]
[code]....
i am currently trying to install vsFTP onto my new linux server and btw i just started using linux today this is my first time using linux so i got the ftp installed good it got downloaded and everything then i went to open a port for my server for vsFTP i used this comand to open it "-A RH-Firewall-1-INPUT -m state --state NEW -m tcp -p tcp --dport 21 -j ACCEPT" then i closed it by pressing ESC then :wq! and it brought me back to my comand line again so now when i try to start the ip table thing with the comand "service iptables start" then when i execute that comand putty respondes with this "Applying iptables firewall rules: iptables-restore: line 1 failed [FAILED]"
The install Guide im using: [URL]
This is my first post, I hope I'm the the right place. I installed mysql mysql-server php-mysql perl-DBD-mysql libdbi-dbd-mysql via "yum install -y" on a server running CentOS 5.3 X86_64 The install completes successful with no errors, but once I start mysqld via "chkconfig --level 35 mysqld on" ; "service mysqld start" There are no errors in /var/log/mysqld.log netstat shows mysqld listening on 3306 and localhost is in /etc/hosts
[Code]...
Error installing mod_ssl on centos 5.7. Do not install the mod_ssl module says there is a package conflict, some way to fix it?. is a 64-bit
[Code]...
I tried to run system-config-kickstart when after full installed CentOS 5.3,it report error as following,does anyone face the same problem?
[root@localhost ~]# system-config-kickstart
Loaded plugins: fastestmirror, kernel-module, priorities, protectbase,
: versionlock
[code]....
I download the xxxx.tar.bz2 file
extracted it,
when i run ./configure under the directory i get the following error code...
i even followed the link http://wiki.winehq.org/WineOn64bit
also http://forum.winehq.org/viewtopic.php?p=28622&sid=17383eb0b922b2c230238f9ab50b265a. and several googling.
i think the architect of the OS and the wine is not matching.
So guide me to solve the above problem.
the output i get on "uname -i"
x86_64
I'm trying to install CentOS 5.5 on an old Pentium 4 desktop PC I have, which is not being used for much other than being a MTA, and I want to migrate this functionality onto the CentOS platform for stability (Windows is a perpetual nightmare. I partitioned a spare 20GB to experiment with, and I want to install CentOS into here to play around with first so I can move my files around between Windows and CentOS, until I'm happy all of the stuff is gone, then I can scrub the Windows partition and claim the space for CentOS.
So, I've downloaded and burned the DVD and tried to install. I start the install with no args from the main install menu, and the process goes through some probing and then comes up with the "Welcome to CentOS" menu. I go through this, and then it tries to start X Server. It fails, and falls back to text mode. I get the "Welcome to CentOS" screen again, and then proceed through it. I set my keyboard layout to UK, then this message comes up at the bottom of the screen:
"_X11TransSocketINETConnect() can't get address for localhost:6001: Temporary failure in name resolution"
then on the next line: "Cannot open display :1" If I force the install to text, by typing "linux text" at the first menu, I get about the same way through, but the install just hangs doing nothing, and no disc access to the install disc.
i restore Centos from backup file,after i have finished,i start centos, it can't start and repost error: IO-APIC + timer doesn't work! Boot with apic=debug and send a report. Then try booting with the 'noapic' option
View 11 Replies View RelatedI just installed opera unite on my machine and get this error. Can anyone tell me what this might be? code...
View 12 Replies View RelatedI installed VSFTPD but when logging ( at command line or browser ) at any user always :
[root@srv vsftpd]# ftp 172.16.0.3
Connected to 172.16.0.3.
220 (vsFTPd 2.0.5)
530 Please login with USER and PASS.
530 Please login with USER and PASS.
KERBEROS_V4 rejected as an authentication type
Name (172.16.0.3:root): system
[Code]...
I've been living too long in apt-land, that's for sure. One of my servers is for an application the vendor indicates "isn't supported under 5.3". Nevertheless, I'm urged to upgrade from 5.2 with 178 packages ready to go when I log in. And for most hosts, that would be a fine thing.
However, for this particular host, I don't want to do that. I do want to upgrade any essential packages (i.e., security), of course, because I don't have a choice there, really. I can certainly look at the security emails from the project, and just upgrade those. Is there an easier way to do this?
What is the best way to upgrade to PHP 5.2? I am currently using PHP 5.1. Is the only way to use the testing repositories?
View 4 Replies View RelatedI have a server currently running 5.2. The developers have asked me (the SysAdmin) to upgrade the server to 5.3 -- but not all the way to 5.4, as they haven't tested the app on 5.4 yet.I believe a simple `yum upgrade` will move me all the way to 5.4 -- at least, `yum check-update` shows a whole bunch of 5.4 packages.
View 2 Replies View RelatedWe are in need to upgrade PHP 5.3.3 to 5.3.4 in order to secure PCI compliance. We have been able to upgrade the CLI version without problem , but the apache module is stuck at 5.3.3. Can anyone provide some detailed steps on how to upgrade, or should I just attempt to compile from source?
View 2 Replies View Relatedwant to upgrade php from 5.2 to 5.3 it can be possible with RPM and YUM but i want to know step by step how it can be upgraded using tar.gz file of PHP and from where i can download it.
View 5 Replies View Related