Server has been moved to a different locations and so the IP has been changed now the hostname is changed to something other that what it was before.
Could it be the rDNS that is causing this?
Note: this is not a DHCP connection.
I've completed the installation of a CentOS server.Running the setup utility as root, ive set up a static IP and installed apache. Now this works ok. I can type in the servers IP address from my browser/putty/winSCP and access the server within the intranet. The problem is that i would also like to access the server using its hostname, e.g. http://centos or whatever Currently i cannot do it. I've searched the forums, edited the /etc/sysconfig/network and /etc/hosts to no avail no matter what i do i cannot access it. i've disabled some services so im not sure if this is the fault.
View 1 Replies View RelatedMy /etc/hostname is not announced on the local network (not showing up on my Mac nor router) when setting /etc/network/interfaces to:
Code:
iface eth0 inet static
address10.0.0.10
netmask255.255.255.0
gateway10.0.0.1
I have tried bringing the interface up and down, and have also rebooted. If I change it to DHCP it will display, but this does not really help me.
Hostname won't start on boot
I have had a problem where I had to edit in port 53 for the iptables which i think was strange.
Anyways.. On boot I am getting a error where my hostname won't start correctly which causes 110 and 143 to not work correctly.
After i boot I have to run
Then my mail seems to work..
GOAL - to get this to work on boot
I am a developer, not a network admin - sorry if this ia dumb question. I need to test an application on CentOS 55 64 bit. The instalation went fine and initially I let DHCP work its magic. The router IP address ia 192.168.0.1 and all other VM's I have are granted dynamic ip address on this range (i.e. 192.168.0.x). However, the CentOS vm got an IP address that looks like it belongs on a different subnet :192.168.1.1
The VM (vmware desktop) network setting for this VM uses "Bridged: Connected directly to the physical network". I can ping the host (Windows 7 64 bit) and the host can ping it (it been the VM) - but no other computer on the network can see it. To make things easier, I changed the network configuration to use a static IP address. Here are my configuration files:
/etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
BOOTPROTO=static
HWADDR=00:0C:29:83:4B:A4
ONBOOT=yes
TYPE=Ethernet
[Code]...
the Centos Server Edition , so glad I make that clear , my problem is the changes of my intern ip adress from the Centos server , and i wont to make it Static so it gets always the same ip.
View 2 Replies View RelatedGivens
LAN
CentOS 5.5
Windows 7 machine (hostname/NETBIOS name: AwesomePC, LAN IP: 192.168.1.20)
Workgroup: Cake
No WINS server
No Domain
No AD
Goal
From CentOS 5.5, have
# ping AwesomePC
resolve to a ping on 192.168.1.20
Problem
# ping AwesomePC
resolves to some random public IP that seems to be coming from my WAN DNS (openDNS) servers
ATTEMPTS
Have edited /etc/nsswitch.conf, edited line: hosts: files wins dns Have edited /etc/resolv.conf, added line: search CAKE Have installed samba (# yum install samba) and run (# service smb start), with /etc/samba/smb.conf, workgroup = CAKE, name resolve order = wins host lmhosts bcast
Does # ping even care about samba? How can I get this to work?
I have a network of 2 WinXP machines and one linux box. I have fiddled around with the settings as you do when learning. The network is working. The network neighbourhood on the WinXP machines recognise the linux box and vice versa, (the linux Places|Network recognises the 2 WinXP). I can Ping the linux box using its hostname from a WinXp. But I cannot do the reverse. I get an 'unknown host' response. I can ping the linux to itself using its hostname.
View 7 Replies View RelatedI'm having an issue on two Fedora Core 13 machines where I can ping others by hostname, but the hostname resolution fails whenever I use ssh/scp/vnc/etc. I can still do these things by IP address, just not by hostname. RHEL5.3 machines on the same network with the same configuration do not seem to have this problem.
Here's the not-so-quick-and-dirty description of the situation:
I know that there is a virtual router at 192.168.31.1 and another at 192.168.30.1. I also know that there is another network (let's call it 90.90.90.0) and on that network lies a number of resources. By nature of this configuration, any machine on 90.90.90.0 can be accessed by any 192.168.x.x, but not the other way around. Beyond that is out of my hands and currently out of my scope of knowledge.
I have a dnsmasq server on 90.90.90.10 that operates as a secondary nameserver, another machine out of my sphere of influence is the primary nameserver (90.90.90.31).
The secondary nameserver on 90.90.90.10 holds the hostnames of our development machines. The problem is that in some cases, while I can ping by hostname all day long, services such as ssh, scp, vncviewer, etc all fail to resolve the hostname. In other cases I can do all of these things.
Every machine has an equivalent resolv.conf:
As an example, I will show the output of a handful of my development machines:
I also included columbia as a one-way test -- even though it cannot access 30.x or 31.x, they can access it:
columbia -- physical machine, Red Hat Enterprise 5.3, IP 192.168.100.200
Okay, so here are the various outputs. Remember, nibbler, discovery, and atlantis can ALL:
- Ping by IP address
- Ping by hostname
- ssh, scp, vnc, etc by IP addess
Additionally, the SERVFAIL reply from 90.90.90.31 is expected since my dnsmasq server is on the secondary server.
Note that the only machine that can both ping and ssh/scp/etc by hostname is nibbler, which also happens to be the only one of the three running RHEL5.3 instead of FC13. Other virtual and physical machines running on the 192.168.31.0 and 192.168.30.0 networks (all running RHEL5.3) work just like nibbler does. So the problem seems to only affect machines running FC13.
Final note: selinux is disabled, iptables is disabled, ip6tables is disabled.
Other than that, discovery is a brand-spanking-new install straight off of the FC13 DVD. atlantis has been around longer, but its just a file server so I haven't done anything too crazy to it.
i am trying to assign a Static IP address and for the life of my i cannot get it to work Can someone explain to me the easiest way to do it and if i restart the server it won't get lost either.
View 1 Replies View RelatedHow would you assign a server a public static IP ?
Ok.. I guess to better ask my question... how to assign server public static IP centos? Like for example I am in the router itself.. where would I go to point ip 44.33.33.21. to ?> 192.168.1.4
What would be the most common in the routers?
I am running a modem in bridge mode to my server
I edit file /etc/sysconfig/network-scripts/ifcfg-eth0 code...
I do service network restart and get nothing ? No connection... Are there other files I need to edit?
New CentOS 5.4 system working fine. Sys admins came in and copied the hosts file from one of the servers down to my desktop and ever sincethen machine has been slow (progs take 10-20seconds to load). RunningGnome. Luckily I saved the old hosts file and copied it back and all is now well. But I'd like to understand why, particularly as I will need to change myhostname in the future.
As configured:
/etc/hosts (yes my hostname is "dummyName" that I will need to change later)
127.0.0.1 dummyName localhost.localdomain localhost
[code]....
I am looking for a way via script to change a systems hostname and IP address!
View 1 Replies View RelatedI have a server running centos 5 located in a datacenter. I am setting it up as a web server but haven't bothered to move the domain from my current registrar to the server as there are a lot of things I need to get done before that. I am having a problem where I couldn't install httpd. So i tried some of the basic fixes i knew as far as yum clean all and checking that my /etc/resolv.conf was ok. I have the two nameservers I am using listed there but I have no hostname set because I simply dont have the domain transferred or anything like that yet. Is that the reason I am having these issues. I installed the system with a network install fine about a month ago so im not sure why I am having problems now.When i try to ping centos.org I get an unknown host www.centos.org error. I tried changing the resolv.conf to have localhost as the hostname and I still have the same issues. I havent made any changes to anything that would potentially cause this.
My etc/resolv.conf looks like this:
search
nameserver 12.34.567.8
nameserver 12.34.566.8
Also it seems the problem may have got worse after yum clean-all because before that when I would try 'yum install httpd' it would show the files and filesizes and ask to install, when I would select yes It would give an error showing it could not find the fastestmirror. Now it doesn't give any file size or files or an option to approve the install. It just responds with an error saying it could not retrieve mirrorlist
<urlopen error (-3, 'Temporary failure in name resolution' Error Cannot find a valid baseurl for repo: base
I'm trying to ping another Ubuntu computer on my local network. If I try doing,ping <hostname>then I get the messageping: unknown host <hostname>however, if I doping <hostname>.localthen I get a response back. I was wondering how I can change it so that I can ping without having to append .localI've installed winbind and modified my /etc/nsswitch.conf file but this has made no difference.
View 2 Replies View RelatedI have an ubuntu 10.04 server with hostname "abc.domain.com". However, due to migration, we had to change to hostname to something else, "xyz".
I have done changing /etc/hosts and /etc/hostname and run /etc/init.d/hostname start.
Checking the hostname and all shows it is now using hostsname of xyz. However, email sending out is still using old hostname. We have some scripts that will send out alerts like failed rsync or hdd space full to my email account. But I see the sender is still "root@abc.domain.com".
How do change that to xyz? I am using postfix. I have edited main.cf and restarted postfix but no go.
I have set up an Ubuntu 10.10 server with SAMBA shares and Apache web server. Everything was working fine. Then there was a power failure and after I restarted the server the XP pc's can see the server using the hostname. They can only see it using the ip adress. I haven't change anything on server or client side. Just the restart of the server.
View 3 Replies View RelatedWhat is the right way to specify hostname(in local linux box, not in DNS server):
myhost1
or
myhost1.mydomain1
I'm having strange difficulties in setting a static ip for my CentOS 5.4 installation. If I use DHCP everything is fine, but with a static ip I have no network connectivity. I have done this many times with RedHat/Fedora/Ubuntu etc. with no problems and now I have no idea what I'm missing or doing wrong. I have tried to set ip as 192.168.1.20 (anything below .100 will do). GW is 192.168.1.1 and NM is 255.255.255.0. This is all I have had to use with other distros, but now when I set these I cannot even access my routers admin page or ping it (192.168.1.1). (I just did this with Vista on my other machine and all worked fine).
View 13 Replies View RelatedI have a desktop PC with CentOS 5 installed, and a wireless card that's working well via NetworkManager.
How would I configure the wireless card statically, e. g. by editing /etc/sysconfig/network-scripts/ifcfg-wlan0?
This would be something like :
DEVICE=wlan0
BOOTPROTO=static
ONBOOT=yes
IPADDR=192.168.1.252
NETMASK=255.255.255.0
ESSID=my_essid
CHANNEL=3
But I don't know how to define the WEP key here.
I decided to take the plunge and change the existing static ip configuration for my home network to a dynamic (DHCP) configuration. The DHCP server in this new network config is my gt701-wg actiontec DSL modem.
[Code]....
I am having several boxex with centos on it. No pb. I have recently setup a new box with centos 5.4 and I am not able to get the network working on it when configuring a static ip.I've configured eth0 and dns using "setup": unsuccessfulI've used the network config GUI: unsuccessfulAnd it is working very well when I let the dhcp getting the setting.I need a static IP.Here is the getinfo output when static ip setup, and below it, the getinfo for dhcp setting
== BEGIN uname -rmi ==
2.6.18-194.3.1.el5 i686 i386
== END uname -rmi ==
[code]....
I had something I think if very odd happen to one of my computers at work today, it appears to have spontaneously switched from having a static address set to getting its address by dhcp.this is a small office with a mix of mostly linux servers and desktops with a few stand alone windows computers, mostly notebooks. Most of the desktop computers get their address by dhcp, they all have NIS /NFS for remote mounted home directories (interchangeable desktops so anyone can log in at any desk). The particular desktop computer in question here has a shared printer on its parallel port, so has a static IP. Yesterday a UPS in the server rack died, after pulling it and plugging things back in and restarting the servers, it was easiest just to reboot all the desktops, everything came up ok including the desktop in question, and the printer did work.
Today I pulled the oversized UPS from this desktop to replace the dead one, and put a more appropriately sized one in its place, shut the servers down again, rebooted, etc,About an hour later someone tells me the printer is not working on the desktop, and after a lot of searching I find this desktop has the wrong IP address, I ran system-config-network and it showed the address was set to dhcp, I changed this back to the correct static IP and things seem to be working ok now.
I have one server with Jboss and Tomcat installed, I have to start these servers manually everytime I do reboot the server.How I could do to start Jboss and Tomcat automatically, when I do reboot the server?
View 1 Replies View RelatedI've recently set up an Ubuntu server and from within the network I can do several things like: log in via SSH, transfer files via FTP, and remotely control Torrents from other computers. My end goal is to be able to access these services by using my dyndns hostname (example.dyndns.org)from an external network.
When I type my dyndns name in my web browser it opens up my router page. How would I set things up so that I can just type my dyndns hostname to point directly to my server, instead of the router page?
All computers are connected to a router which is connected to an ADSL modem, with automatically assigned I.P addresses.
I am using samba version 3 (probably), and the problem is that the linux based nas can only be accessed via its ip 192.168.x.x but not its hostname /server string appointed by the smb.conf file:
Code:
[global]
netbios name = NAS
server string = NAS
smb passwd file = /etc/smbpasswd
[Code]....
I am using centOS 5.0. After I change from DHCP to static IP address, I cannot ping hosts on the same subnet. The error message says destination host unreachable. Before I made the changes I was able to ping and now even I change it back to DHCP I still cannot ping with the same destination host unreachable message. The centOS is running on VMware on a Windows host.
ifconfig shows
eth0 Link encap:Ethernet HWaddr 00:0C29:A1:9A:10
inet addr: 192.168.0.202 Bcast:192.168.0.255 Mask: 255.255.255.0
inet6 addr ......
After pinging 192.168.0.106 (106 is on and other host can ping it), arp -a shows ? (192.168.0.106) at <incomplete> on eth0 I tried different ways by disabling the firewall and and disabling SE protection. No Luck.
I am having a problem with when I bind a static IP to my NIC I loose all network connectivity but, if i leave it set to dhcp it works fine. I've gone over all my settings a thousand times and they are all correct. Has anyone else had this problem or give me a hint as to what the problem might be?
View 2 Replies View RelatedI'm trying to install CentOS 5.4 from my local repo, booting the server from centos54-netinstall iso (vmware). I write "linux URL..." during boot. I eventually get prompted for network config, where I choose manual configuration. Hitting OK ignores my config and defaults back to dhcp, which won't work since I don't have any dhcp server available.Whats wrong? Is there a bug in anaconda?
View 1 Replies View Related
