I installed Ubuntu 10.04. I was having many issues getting the modem to work. I have worked most of them out and was able to connect using KPPP. My issue now is that I can not find a version of Network Manager that allows me to configure to use the Modem connection. There is simply no modem tab in Network manager. So my modem is connected to the ISP but I can't configure the connection.
View 1 RepliesI have some CDMA USB modem, it's work perfectly using wvdial, but why my modem
not detected by network manager. I want using gwibber and empathy IM, and i read that's apps using network manager (ex:if i connect using wvdial, i can't update status using gwibber). How to make network manager recognize my USB modem?PS:
Code:
$lsusb
Bus 003 Device 004: ID 10c4:ea60 Cygnal Integrated Products, Inc. CP210x Composite Device
[code]...
I'm try to create a mobile broadband connection using my Huawei E 1550 medem. but in Network manager there is not way to select my modem in the first step ( device selection step ) the drop down menu is locked. what to do ? how to configure my modem with ubuntu ?
View 1 Replies View RelatedI am trying to connect my Asus EEEPC to an option icon 431 usb modem.
I have successfully installed the HSO driver however am unable to connect through network manager. I have successfully connected through Rhel Beta 2, Fedora 13 and Ubuntu 9+, however, desperrately want to be able to use centos 5..5
Here's some info up front code...
I have installed WvDial (apparently) but it has no icon or launcher to start it by default, how do i get it to run? I also need basic set up how to. I am running Ubuntu 9.10 (Karmic) and network manager doesn't seem to be able to use my modem to connect to the internet (set up wizard works, appears connected, but then I get page not found error). Hence I wish to use WvDial to try to connect instead.
View 9 Replies View RelatedI have a k3806-z vodafone mobile broadband modem, on ubuntu 10.04. I have added the mobile broadband connection with the network manager wizard. But network manager does not list my connection. I installed usb-modeswitch and usb-modeswitch-data. Still nothing. The disc utility tells me it recognises the modem as a cd drive and a storage device. Evidently usb-modeswitch is not working.
View 11 Replies View RelatedI've FC10 installed. After updating a few days back, I'm unable to use Network Manager to connect to the net through my USB Modem. All the threads I've read say to do
Code: yum update NetworkManager but how can I do it without net connection? Can anyone post the exact link of the Network Manager's latest and BUG-FREE rpm so that I can directly run it?
Its my liillte headache with my hsdpa modem. using wvdial i can connect to the net huawei e220l but NetworkManager is a different story. # lsusb | fgrep HuaweiBus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modemi',m ok with wvdial and its gui wrapper(gnome-ppp) .i just would like it to be functional since my noob bro
View 2 Replies View RelatedI installed ZTE MF 626 modem in my F10 with kernel 2.6.27.12-170, i run usb_modeswitch and so far things happened normally. Watching through /var/log/messages it says that F10 detects two port device for this modem: ttyUSB1 and ttyUSB2, and in the sequence it disable port ttyUSB1 BUT Network Manager still set this port.I mean, when i connect via wvdial appointing to ttyUSB2 i get connection, but Network Manager fails to do it appointing to ttyUSB1. How to change device port in Network Manager?
View 1 Replies View RelatedI just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedI recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies View RelatedI have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies View RelatedI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
I currently have a computer sitting underneath a router/switch on a Local Area Network that I want to connect to the Internet using a 3G USB dongle modem. If I am connected to the ethernet and then enable the modem connection, only the ethernet LAN side works. If I enable the modem and then enable a (disabled) ethernet connection, only the ethernet LAN side works. If I keep the ethernet disabled and connect using the modem, I can get out onto the Internet, but obviously not the LAN. I need to be able to do both.
View 2 Replies View RelatedMy wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies View RelatedBasically, I wanted to use the Bootp (PXE) protocol to boot a machine (my laptop) from my network instead of using USB/DVD boot medias to reinstall if need be. My router being a piece of crap, I couldn't setup the DHCP server to allow PXE packets. Confirmed from the manufacturer that it is not possible. Well for a $140 router, you would expect the opposite. Anyways, here I am with a small machine setup with Slack, no desktop environment (only CLI) and connected to my router (which I deactivated the DHCP) so the machine can act as a DHCP server. It works very well. However, I would like to install a few other utilities into that machine and for them to work, I need to put the machine between my cable modem and my router. Basically, here's the topology from outside):
Internet (ISP) --> Modem --> DHCP machine --> Router (no DHCP - acting as a switch) --> computers & printers
The problem is that I cannot connect to the modem from the computers on the network. Also I cannot access the internet (go on the WAN side) from the computers. From the computers (namely my laptop), I can ping the router, but cannot ping the interface where DHCP broadcast. Also I cannot ping the modem. From the router (using the web config page), I can ping the DHCP broadcast. From the DHCP machine, I can ping the modem. In the DHCP server, I setup the eth0 (the interface where the modem connect to) as a DHCP assigned IP so it can obtain the IP from the modem. The eth1 (the interface where DHCP broadcast) is static. All my machines obtains a IP from the DHCP machine without a hiccup.
I had trouble connecting to a wireless network with openSUSE, so I tried the YAST network manager to see if that fixed it. Not only did it not fix it, but now I cannot connect to any network, wired or wireless. I tried to open the default network manager and it said "Network management disabled". How do I re-enable it?I also have set YAST settings back to their originals with no luck.
View 7 Replies View RelatedI have been using an ethernet ADSL Westell modem for years and would like to upgrade to a newish Allied Telesyn USB Modem AT-AR206 in Fedora Core 10. The modem power goes on when plugged into my pc and lsusb shows that it has been recognized with this:
Bus 002 Device 003: ID 1110:9022 Analog Devices Canada, Ltd (Allied Telesyn) ADSL Loader
I used system-config-network but don't have the option of adding this new hardware.
How do I configure my network to use my DSL line?
Whenever I start up my laptop i do not get a wireless connection automatically. I have to rightclick network manager applet and select enable networking. After that everything works fine untill i shutdown and restart my laptop. I would like a way to change this so that my wifi connection is working whithout having to click something first..
OS:Xubuntu 10.04 LTS!
hardware: dell inspiron 6000
nm applet: 0.8.?
Neither of my wired network connections are listed in the network manager applet. I know that networking seems to be functional since I can ping local devices on the network. I can't resolve DNS names however. I suppose this is because network manager usually handles DNS? I've posted the outputs of various configurations below.
Code:
/etc/NetworkManager/nm-system-settings.cfg
# This file is installed into /etc/NetworkManager, and is loaded by
# NetworkManager by default. To override, specify: '--config file'
# during NM startup. This can be done by appending to DAEMON_OPTS in
[code]....
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code:
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7
Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
[code].....
Loaded Ubuntu 10.4lucid on TransPort NX Mobile Pentium II, 328MiB,Using Netgear Rangemax wn511b. with Broadcom STA wirless driver. bcm43gx.Boot computer and network manager shos "no network devices available" Run system/administration/hardware drivers and the Broadcom STA driver shows up (only one that shows up) REMOVE and then ACTIVATE and the network manager sees it and connects fine. Shut down computer, restart and no device. I am forced to Remove and Activate each time I start the computer.Is there a way to set this driver to be found and run at computer start.
View 4 Replies View RelatedSince the last update the 'wireless network authentication required' box keeps asking me for my wep key. Everything was working fine previously, I've even re-installed ubuntu just in case it was something I did....again everything was working OK until I installed the latest Nvidia drivers and updated ubuntu.I can see my wireless connection when I click on the network manager icon I just wont connect.Wired connection works fine.
05:00.0 Ethernet controller [0200]: Atheros Communications Inc. AR5001 Wireless Network Adapter [168c:001c] (rev 01)
I'm using NM applet to connect to the Internet.I just need to know my Internet usage details such as Connection Duration,Data sent and received.
View 2 Replies View RelatedI'm trying to change my network settings under Gnome and 9.10.
System->Preferences->Network Connection brings up "Network Connections". Under the "wired" tab, I see "ifupdown (eth1)". The edit button on the right side is grayed out.
Is this where an IP address can be config'ed, or is it somewhere else?v
I've installed Karmic after using Jaunty for a year. In Jaunty, my wireless Belkin USB adapter would get it's best signal if I set the rate at 11M...sudo iwconfig wlan0 rate 11MTo avoid having to enter that in terminal after a reboot, I followed the advice of Raven on another thread that suggested using WICD instead of Network Manager, as there were options for scripts in WICD that would allow a startup script...sh -c "/sbin/iwconfig wlan0 rate 11M"This doesn't seem to be working for me in Karmic (my connection constantly drops). Plus, the new icons for WICD are distracting (it changes color from green to yellow when the signal goes from good to low) With Network Manager and setting the rate @ 11M via terminal, everything seems rock solid (I left Last FM on last night and it was still playing when I woke up).
View 2 Replies View RelatedI used Ubuntu for the first time yesterday (V.9.04) and imediatly upgrade it to V.9.10. After,the DSL conection failed to conect. After reading many threads here I was able to connect by opening a terminal:
sudo pon dsl-provider
It seems ther's a bug with network-manager, but I'd like to use it again as it easier and NB user-friendly.