I have a PC connected by ethernet to a Galil motion controller card.I recently installed Centos 5.The Galil software for communicating with the card is reporting that it can't join a multicast socket group.The software used to work with another version of Linux.
View 6 RepliesIn the ipv4 code i was using "ip_mc_join_group()" to join the multicast group. but i cannot find a similar function for ipv6 i have found one ipv6_sock_mc_join() but this function is not available for use with my module as it is not exported.
View 1 Replies View RelatedI make an application on GNU/Linux which listening on a MULTICAST stream, so I open my unconnected socket, bind it on a MULTICAST address and a port, join the multicast group with the "setsockopt (IP_ADD_MEMBERSHIP)", then I receive datagram on my socket.
Now I've two different instances of the same application that run with their own MULTICAST address and port. And what I found strange is that, after a misconfiguration, I switch the ports, for example:
Emitting on 225.0.0.1/23451 and 225.0.0.2/23452
Receiving on 225.0.0.1/23452 and 225.0.0.2/23451
And my receiving part doesn't care about the MULTICAST address, it looks like the socket is listening on the port number only! I mean that the receiver [225.0.0.1/23452] take its datagrams from emitter [225.0.0.2/23452] and vice-versa!
How can i make my device join a multicast IP group.My target device is in linux
View 2 Replies View RelatedI'm trying to receive data that is being broadcast on address 224.0.1.1, 224.0.1.2, 224.0.1.3, 224.0.1.4. ports are 1201, 1202, 1203, 1204 respectively. I can see the data using wireshark but can not get my program to receive the data. all firewalls are shutdown. iptables is not running, i've set net.ipv4_icmp_ignore_broadcasts = 0 and still no luck.
View 1 Replies View RelatedI am in verse to test "Multicast Packet filtering".I want to setup Virtual Machines to be servers with bind option set to a multicast group address of 225.0.62.87.Then I want to configure the client VM, connecting to the multicast group address and setting the TTL as needed.
View 3 Replies View RelatedI don't know how to join centos v5 to domain cotroller 2k3.
View 4 Replies View RelatedI used this Tutorial, to create a php chat daemon. But now I'm getting to the point where i've reach the max socket connexion on my centOs box... I have to much users. Which is 120. when there's more then that number of users in the chat .. things start to get messy. I have tried to change the SOMAXCONN kernel variable without success. I'm sure there is a solution to boost the number of user my chat can handle... (My server is dedicated to the chat).
View 2 Replies View RelatedI want to configure socket timer to release socket(port) once the connection is terminated. Do we have something in Linux OS to configure this delay to release socket?.
Any command, link or man-page anything will be helpful.
I browsed a lot but unable to find it.
I had installed Fedora 10
Below is the output of uname -a
Linux 2.6.27.5-117.fc10.i686.PAE #1 SMP Tue Nov 18 12:08:10 EST 2008 i686 i686 i386 GNU/Linux
I need to enable telnet service on it, then found xinetd and telnet-server not installed,
Then I had installed below
First I had installed Xinetd: xinetd-2.3.14-21.fc10.i386.rpm
then I had installed telnet-server: xinetd-2.3.14-21.fc10.i386.rpm
After installation I executed below commands
Service xinetd start
Chkconfig xinetd on
Chkconfig telnet on
Service iptables stop
Chkconfig iptables off
Iptables �F
After I had tried telnet localhost ----IT FAILED
when I run telnet server manually by issuing the below command
/usr/sbin/in.telnetd, I get below error
[COLOR="Red"]/usr/sbin/in.telnetd: getpeername: Socket operation on non-socket[/COLOR]
I have other system running same OS, I had followed the same steps discussed above to enable telnet, It works fine on it.
I have a cgi script that tries to get the IP address of a domain. the Domain is defined in Bind, yet it can not resolve it. I put the domain in the host file and it then gives a Error: unable to create socket - Permission denied
I figure I have to do some code changes to the script but here I would like an explaination as to the error I am getting.
I am trying to search a tool for testing multicast. Currently, 'yum search multicast' yields nothing. I saw mcsender and mctest in google but they seem not to be supported in CentOS. Do you know any tool that can test multicast?
View 3 Replies View RelatedI am trying to search a tool for testing multicast. Currently, 'yum search multicast' yields nothing. I saw mcsender and mctest in google but they seem not to be supported in CentOS. Do you know any tool that can test multicast?
View 3 Replies View RelatedI am pragmatically trying to upload a list of files from my client machine to a proFTPd server I have running on Ubuntu. Every time I get several (around fifty) files into the transfer, I get the following error: Quote: Connection reset by peer: socket write error
I am able to remotely upload 25,000 small files of ~ 1K in size, but when I go to upload hundreds of 2-4 Mb files, I get a socket write error. Am I using up all available sockets before they can be released? If so, how do I release the sockets? If not, what does this error mean and why am I getting it?
I am trying to understand the join command. I wish to join two files:
Code:
$ cat test1
a 0
b 2.51
c 19.85
$ cat test2
a 0
b 2.51
[Code]...
this is great but I do not understand why join ignores the -e flag and fails to insert FOO in the empty field.
I have several multicast data feeds that I'm trying to connect to using a minimal server install of Ubuntu as a VM on a VMWare ESXi server.I have another VM on the same server running Solaris that can connect with no issues to the incoming multicast stream.
View 1 Replies View RelatedThis is not a linux specific question more of a general network issue with the hope that someone may have already done this under linux.My problem:I have a red hat linux machine transmitting IP multicast packets onto an ethernet gigabit network (cisco switch).Wireshark (running on a different red hat linux box confirms packets on network.
View 4 Replies View RelatedIf I have set up 2 network interfaces on a box, if I started sending multicast traffic, it will go out through both interfaces? Or is there a way to control through which interface it will go out?
View 1 Replies View RelatedI have a centos 5 server joined to a win2003 active directory domain. It's a virtual machine, so i had to sync the date (ntpdate) because it was 12 minutes different. It worked, but not ntlm authentication is not working anymore. If i rejoin the domain i get:
net ads join -U administrator@MYDOMAIN.COM
administrator@MYDOMAIN.COM's password:
Failed to set password for machine account (NT_STATUS_DISK_FULL)
Failed to join domain: NT_STATUS_DISK_FULL
For the last couple of days, I've been unsuccesfully trying to receive multicast packets on Ubuntu Server 11.04, and seen some strange things along the way. The program i use to test this, is basically http://www.scribd.com/doc/38224328/mcreceive-c.Now the network has been configured to forward me the multicast packets, regardless of the joins. So tcpdump shows me:
Code:
15:16:11.308952 IP 10.164.130.2.61417 > 224.16.17.23.47806: UDP, length 1400
...
[code]....
I've got an application that compiles in Windows and Linux and is using UDP multicast to communicate. I'm running it on a Windows machine, a Linux machine and a small board (Gumstix) that is running Linux as well. The Windows and Linux machines have no problems sending/receiving packets with each other. The Gumstix and Linux machines have no problems sending/receiving packets with each other. The Gumstix can also send/receive packets with two instances of the application both running on the Gumstix.
But when running on the Gumstix I can send udp multicast packets to Windows, but cannot receive them. (It works if I do point to point with a known IP port#, but not multicast.) I can run tcpdump on the Gumstix and see the packets, but they are not being received on my socket. Here's what tcpdump (running on the Gumstix) outputs when sending the same packet from different sources. Notice the IP header ID and flags (don't fragment) are different when coming from Windows.
WINDOWS to Gumstix
-7:-45:-2.015784 IP (tos 0x0, ttl 15, id 35331, offset 0, flags [none], proto: UDP (17), length: 444) 172.30.42.3.1165 > 239.255.183.180.47028: UDP, length 416
LINUX to GUMSTIX
-7:-43:-38.451991 IP (tos 0x0, ttl 15, id 0, offset 0, flags [DF], proto: UDP (17), length: 444) 172.30.42.13.32771 > 239.255.183.180.47028: UDP, length 416
GUMSTIX to GUMSTIX
-7:-33:-10.955608 IP (tos 0x0, ttl 15, id 0, offset 0, flags [DF], proto: UDP (17), length: 444) 172.30.42.110.1025 > 239.255.183.180.47028: UDP, length 416
I've tried everything I can think of to get this to work but am not getting anywhere. Also I'm pretty inexperienced when it comes to Linux. Anything I could try to be able to receive udp multicast packets from Windows?
I have 4 interfaces, dvb0_0 - dvb0_3. Each one has a multicast stream coming in on it. The program I am using to decode these streams only accepts one interface though. How can I "combine" so that the program, listening on 1 ip can get all 4 streams? they are on groups 224.0.1.1-4
View 1 Replies View Relatedhave a doubt about the multicast address.I have read that IP and ethernet multicast address have the same last 23 bits. While an ethernet multicast address always starts with 01:00:5E. Changing the last 23 bits of the IP address into hexadecimal form and "adding" them to the first 24 bits we find the ethernet address but what about the missing bit??? For istance I have: 230.11.111.10 = 11100110.00001011.01101111.00001010 So converting the last 23 bits I have b:6f:a The final ethernet address will be 01:00:5E:b:6f:a . And what about the missing bit?
View 1 Replies View RelatedWe have a high speed udp multicast connection. There are about 37 multicast groups and average incoming rate via the connection is about 20000 pkt/sec and peak 40000+ pkt/sec. Each packet is about 100-300 bytes. And there are 6 busiest multicast groups generating 80% of the traffic. No significant outgoing traffic via that interface. The problem is that, if our heavy-weight application create 37 sockets for all the groups, the packet loss become quite frequent. but if we create the 6 sockets for the busiest groups, the packet loss drops to 1/10 of the original level. We can confirm that the lost packets DO arrive in our box because a light-weight recorder on another box on the same ethernet segment can see the lost packets when listening to the same groups. If we start another heavy-weight application for the rest groups (31 groups ) on the same box, the packet loss just come back to the original level.
The packet loss happens not only to the heavy-weight application but also the light-weight recorder running on the same system. that is, the loss is system wide. The socket kernel buffer are all 4MB max and did not observe system buffer overflow. It seems the number of sockets listening to the same multicast group have the most negative impact on packet loss. And the higher traffic have a far less impact on packet loss than the number of sockets. It also seems that there is some limit in the kernel that when socket number are reduced under, the packet loss can significantly ease. How can I further diagnose the problem? Our system is RHEL 5.3 32bit i386, Xeon 2.9GHZ 16 Processors, 32GB memory. Two broadcom giga netowrk card and 6 Intel GIGA NIC, and only one interface card has so much traffic.
I am trying to run some benchmark tests for multicast. What I want to do is have one system send multicast packets and another receive it on all it's interfaces (eth0-eth3). Whenever I run receiver on more than one interface I get echo effect (if I receive on x interfaces then I get same packet x number of times). Is this how it is supposed to behave? It does not make any difference whether I use loop-back or not. I have set SO_REUSEADDR to yes. I run separate instance of receiver on each interface. I am doing this on RHEL5 systems.
# uname -r
2.6.18-164.20.1.el5
Tutorial for setting up a
domain server, dns server, ldap, mail server, firewall and proxy
with centos and how can I join ubuntu clients to the domain?
Good evening, I get the following error when prompted for my user name and password credentials that have access to the domain rights on the server. After typing in root and the password I get the following.
"The specified computer account could not be found. Contact an administrator to verify the account is in the domain. If the account has been deleted, unjoin, reboot and rejoin the domain."
Posted below is my smb.conf file, however I feel like I am screwing up the last steps with group-mapping, net commands, and creating accounts.
[global]
workgroup = SCRUGGSHOME
passdb backend = tdbsam
printcap name = cups
add user script = /usr/sbin/useradd -m %u
[Code].....
I am downloading a set of files that were split by a program called ffsj
http://www.jaist.ac.jp/~hoangle/filesj/
The Fastest File Splitter and Joiner.
I have been googling it, but I am not finding anything that is telling me how I might join these files using my CentOS Linux. How can I join these files using CentOS?
I have just set up an FC 13 box for a small network application. At the core, the application is supposed to receive some data over a multicast on my local network. However, for some reason, I am not being able to receive any multicast data on this machine. Other machines, on the same network (connected on the same layer 2 switch) are receiving the multicast just fine. I have tried the following things:
1. ensure that I am joining the multicast on the correct interface: the machine has only one ethernet card. Also, after starting my application, I use netstat -g to check for group membership. The multicast subscription shows up fine.
2. ensure there is no error in the program: the program works fine on my person linux machine
3. ensure that the multicast is actually available: it is available on all other local machines. I also wrote my own small broadcaster. data from this broadcaster (running on the same box) is available to other machines but not to my own listener program.
4. no firewall/filtering settings on the layer2 switch
5. TTL setting on the broadcast: have tried changing it from 1 through 5 with no effect. Note that even if the broadcast is coming from the same machine, my machine does not pick it up while other machines on the network do so.
I suspect this has to do with some settings on the network card itself. Below is the output of /sbin/ifconfig on the card:
eth0 Link encap:Ethernet HWaddr 00:08:A1:67:BBA
inet addr:192.200.20.32 Bcast:192.200.20.255 Mask:255.255.255.0
inet6 addr: fe80::208:a1ff:fe67:bbca/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
How can I find out list of multicast addresses and port in use?"netstat -ng" only gives list of multicast addresses that have been joined, it does not give port number.I have several hundred servers running application that listens to several multicast addresses on different ports. I want to write an audit script and get the list of multicast address and port numbers.
View 2 Replies View Related