Networking :: Receiving Multicast On Multiple Interfaces?
Jul 9, 2010
I am trying to run some benchmark tests for multicast. What I want to do is have one system send multicast packets and another receive it on all it's interfaces (eth0-eth3). Whenever I run receiver on more than one interface I get echo effect (if I receive on x interfaces then I get same packet x number of times). Is this how it is supposed to behave? It does not make any difference whether I use loop-back or not. I have set SO_REUSEADDR to yes. I run separate instance of receiver on each interface. I am doing this on RHEL5 systems.
# uname -r
2.6.18-164.20.1.el5
View 3 Replies
ADVERTISEMENT
Apr 1, 2010
I have 4 interfaces, dvb0_0 - dvb0_3. Each one has a multicast stream coming in on it. The program I am using to decode these streams only accepts one interface though. How can I "combine" so that the program, listening on 1 ip can get all 4 streams? they are on groups 224.0.1.1-4
View 1 Replies
View Related
Nov 6, 2010
I am trying to port some MS Visual Studio C++ code to Linux/wxWidgets. The code is socket-based and very similar between Windows and Linux. In Linux the socket, bind, and setsocketopt all return with no error. See:
Code:
BOOL CAV15Input::SetupSocket(BOOL Out)
{ if(pU->PrDebug) {
sprintf(_send,"CAV15Input::SetupSocket for port %d",pSonar->dPort);
pU->OutMsg(_send,1,0); } pSonar->UDP_Sock=0; pSonar->UDPError=0;
pSonar->UDP_Sock=socket(AF_INET,SOCK_DGRAM,0);
if(pSonar->UDP_Sock<0 ) {
pU->OutMsg("socket failed on SetupSocket",11,0);
pSonar->UDP_Sock=0;
pSonar->UDPError|=4;
return FALSE; }
// the AF_INET address family, which contains IP addresses,
local.sin_family=AF_INET;
local.sin_addr.s_addr=inet_addr(pSonar->IP_Add_PC);
local.sin_port=htons(pSonar->dPort);
// from Dave Goffe:
//> int t = 1;
//>
//>setsockopt(fd,SOL_SOCKET,SO_REUSEADDR,&t,sizeof(t));
int t=1; if(setsockopt(pSonar->UDP_Sock,
SOL_SOCKET, SO_REUSEADDR,
(char *)&t,sizeof(t)) <0) {
CloseSock();
pU->OutMsg("set SO_REUSEADDR failed in SetupSocket",11,0);
pSonar->UDPError|=4;
return FALSE; }
if(bind(pSonar->UDP_Sock,(sockaddr *)&local,sizeof(local)))
{ CloseSock();
pU->OutMsg("bind failed in SetupSocket",11,0);
pSonar->UDPError|=8; return FALSE; }
if(pU->PrDebug) {
sprintf(_send,"socket setup & bind OK for port %d",pSonar->dPort);
pU->OutMsg(_send,1,0); }
// Join multicast group
if(pSonar->datatype) // for element data
mreq.imr_multiaddr.s_addr=inet_addr(pSonar->IP_Add_ELD);
else // for beam data
mreq.imr_multiaddr.s_addr=inet_addr(pSonar->IP_Add_HRB);
mreq.imr_interface.s_addr=inet_addr(pSonar->IP_Add_PC);
if(setsockopt(pSonar->UDP_Sock,
IPPROTO_IP, IP_ADD_MEMBERSHIP,
(char *)&mreq,sizeof(mreq)) <0) {
CloseSock();
pU->OutMsg("join multicast failed in SetupSocket",11,0);
pSonar->UDPError|=16;
return FALSE;
} if(pU->PrDebug) {
if(pSonar->datatype) // for element data
sprintf(_send,"join multicast OK on %s",pSonar->IP_Add_ELD);
else // for beam data
sprintf(_send,"join multicast OK on %s",pSonar->IP_Add_HRB);
pU->OutMsg(_send,1,0); }
jMCast=1; return TRUE; }
But then when I try
recv(pSonar->UDP_Sock,&pUDP->u_dg_cM.cM[8],reedlen,0);
it blocks as if there is no data. (In Windows this works fine.) Is there something else in Linux and/or wxWidgets that I'm missing that could prevent UDP datagrams from being received? Is there some way in Linux to monitor incoming UDP traffic?
View 2 Replies
View Related
May 14, 2009
I have to implement a client/server solution that pretty much does this:
1) Client broadcasts UDP packet;
2) client receives answer packet from multiple servers - it includes the TCP port to use next and a list of files;
3) user picks file from list;
4) client downloads from server via TCP.
I got the client to broadcast and the servers reply. However, i'm not yet getting the client to be able to receive multiple packets.
I'm very inclined and have tried to implement select, but most examples i find are for stream sockets. Once the fsSet shows a read event would i create a new socket or just use the main socket for recvfrom()ing? I assume i need at least two sockets. However i'm not sure if this will allow the client to actually receive simultaneously... so i'm kinda not wanting to guess that this implies fork and threads... Also, i assume the socket must be nonblocking (done), although i've read somewhere select would take care of this?
View 3 Replies
View Related
Mar 11, 2010
I would like a basic firewall on my netbook and first attempted this by using firestarter as i have no experience in writing IPTABLES rules from first principle and to be honest the syntax looks horrific! the problem with firestarted is that when i selected WLAN0 to be the internet connected port everything worked fine until i connected to a VPN at which nothing would work (the only error i got was when pinging an IP address when i got sendmsg not permitted) my normal setup is this.... normally im connected via WLAN0 to the internet. but one one particular network i must activate the VPN to use anything, this creates another interface tun0. both wlan0 and tun0 will be assigned an ip address but only the tun0 will do anything (the wlan0 one is configured by the network to just allow traffic to the vpn gateway and nothing else) what i really need is some way of creating a basic firewall (drop all incomming except ports i specify) that lives on wlan0 unless tun0 is active in which case it moves to tun0
View 3 Replies
View Related
Feb 16, 2011
Is there a way to do multiple interfaces in tcpdump? I have found that when using "-i any", not all packets are captured (compared to "-i eth0" on a machine with only one interface). I need to monitor traffic on some machines with as many as 6 interfaces, and get these packets that "-i any" misses. When I give the "-i" option multiple times, it seems to only use the last one.
View 3 Replies
View Related
Apr 30, 2009
What traffic goes where? Why? Any bandwidth advantage? What if one goes down?
View 4 Replies
View Related
Jul 6, 2010
I have the following setup: Client A, having 2 network interfaces, eth0 and eth1, both with the IP address 192.168.1.1/32. Client B, also having 2 network interfaces, eth0 and eth1, with the IP addresses 192.168.1.2. The routing table on client A has one entry: 192.168.1.2 dev eth0 The routing table on client B has one entry: 192.168.1.2 dev eth1. Basically the idea is to send the upload traffic one one interface and the download traffic on the other interface. (Client B could serve as a gateway). However, with this setup, well... nothing works. The packets received by Client B are ignored. Does the linux kernel have anything against routing packets coming from an interface, although he thinks the source is on another interface?
View 4 Replies
View Related
Jan 7, 2011
I have got a problem in the configuration of the network for my Linux box. The distribution is Slackware 12.2 with the 2.6.27.7-smp kernel. There are three ethernet NIC, one on the motherboard with Atheros AR8121/AR8113 chip and two on PCI card which with RealTek 8169.
I installed the module for Atheros which is the atl1e.ko and I defined the configuration for the three NICs in /etc/rc.d/rc.inet1.conf.
When I hit the commend ifconfig I see all the three interfaces eth0, eth1, and eth2, but the address are not distributed between the NICs as I'd like so I thought to resolve the inconvience with udev, but I don't know how to proceed because there is a strange situation.
If I control the file /etc/udev/rules.d/70-persistent-net.rules I see a strange situation: Once the file contains nonly a line for the Atheros NIC but if I reboot the system there are the two lines for the two RealTek NICs and everytime the system is rebooted there is a change between these two alternatives. A detail I noted is that the two modules atl1e and r8169 are both always loaded, so udev has always the chance to detect the hardware but for some reason that I don't know something goes wrong. Another related problem that bothers me is the absence of udevinfo and udevtest. Have I perhaps to reinstall udev?
View 1 Replies
View Related
May 6, 2010
I have 4 Ethernet Interfaces. I need Dynamic IP-Addresses for 2 Interfaces. Can anybody help me how can i achieve that
View 3 Replies
View Related
Apr 7, 2011
I have a problem where multiple interfaces in my network manager have the same name. This means that I am unable to have different settings for each interface. Here is my setup:
Ubuntu 10.04 LTS
uname -a: Linux muon 2.6.32-30-generic #59-Ubuntu SMP Tue Mar 1 21:30:21 UTC 2011 i686 GNU/Linux
Adapter 1: 02:00.0 Ethernet controller: Intel Corporation 82573E Gigabit Ethernet Controller (Copper) (rev 03)
Adapter 2: HTC Desire tethered via USB. When I start from scratch, with no remembered networks in the network manager, the Ethernet is shown as "Auto Ethernet". When I then connect the HTC Desire, the new network is shown in the network manager also as "Auto Ethernet". Previously, when I right clicked on the network manager and selected "Edit Connections", there were multiple "Auto Ethernet" entries under the wired tab.
Now (and I do not know what changed, sorry), I only see one entry. When I edit this entry (say, add a route), then the route is added for both network interfaces. This used to still work, so I was not worried about the name clash, but now it is causing problems so I need to have a different name for each network interface.
View 1 Replies
View Related
May 15, 2009
if I want to do eth1, eth1:0, eth1:1 etc and automatically configure them at startup where do I put that in the network-scripts?
View 2 Replies
View Related
Oct 15, 2010
configure a server with two network interfaces? This system is physically moved from one network to another every few days (different buildings but connected by a VPN). I'd like to be able to control the IP address of the system depending on which port I plug the network cable into with a static setting. Right now the system will connect to the local network, but any requests to go beyond the subnet get lost. The only way I can get the system to talk outside of its subnet is to comment out the second interface.
/etc/network/interfaces:
auto lo
iface lo inet loopback
auto eth0
[code]....
View 2 Replies
View Related
Mar 6, 2011
I have a built-in gigabit Ethernet card which is connected to a router. Router's IP address is 192.168.2.1 My IP is 192.168.2.161 (eth0) I also have a Nokia N900 connected via USB and its IP is 192.168.1.1. It serves as a second router and on that interface (usb0) my IP is 192.168.1.2 N900 is also connected to a wireless network. Router of that network has the IP 10.0.0.1 and N900's IP is 10.0.0.50 (wlan0) My problem is that I want to reach a server at 10.0.0.7 from my computer. Is there a way I can do that?
View 1 Replies
View Related
Feb 26, 2011
I have two network interfaces and their entries are shown as eth0 and eth1... I want to assign them static IPs which I do by
ifconfig eth0 192.168.9.245 netmask 255.255.0.0 up
ifconfig eth1 192.168.8.245 netmask 255.255.0.0 up
But I am not sure if it will ping both the interfaces if I issue a command
ping -I eth0 192.168.9.113 (machine in network)
ping -I eth1 192.168.9.113 (machine in network)
I am getting pings from eth0 but not from eth1
View 10 Replies
View Related
Oct 26, 2010
I'm trying to connect one computer to two others in an ad-hoc infrastructure.
[computer 1] ---- [computer 2] ---- [computer 3]
computer 2 is running Linux and has a single NIC wlan0. I want to it to connect to both computer 1 and computer 3 so each computer can talk to the other. No switch is available so it needs to be an ad-hoc setup.
[Code]...
View 1 Replies
View Related
Jan 7, 2010
I have a weird issue that I have not seen on any forum. My jaunty on DELL studio laptop seems connected to net, but I can not access any network service (ssh, firefox etc.). But when I connect a cable the cable lights blink as it should be and in wireless connection my wifi light blinks.
It was working 2 days ago without problem, and I have not done big changes recently.I removed and reinstalled network-manager and network-manager-gnome. Nothing changed. I see a message in each restart as follows (when Openafs is starting). I can reproduce it with "/etc/init.d/openafs-client restart"
Code:
ADVISEADDR:error in specifying interfaces: no existing ip interfaces found
#lspci
Code:
04:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
08:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5784M Gigabit Ethernet PCIe (rev 10)
#lshw -c network
[code].....
View 5 Replies
View Related
Jan 25, 2010
I have 3 Interfaces for a different LAN's and when I start one interface the another interfaces goes down.How can it's possible?I configure my ethernets as:
Code:
/sbin/ifconfig eth0 172.16.3.108 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth1 172.16.3.109 netmask 255.255.0.0 broadcast 172.0.255.255
/sbin/ifconfig eth2 172.16.3.1110 netmask 255.255.0.0 broadcast 172.0.255.255
View 12 Replies
View Related
Apr 16, 2010
If I try to add a new interface (eth1) to /etc/network/interfaces, I get
Code:
* Reconfiguring network interfaces... SIOCSIFADDR: No such device
eth1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
[Code]...
How do I add 2 interfaces and get anyone of them to work, as available ?
View 5 Replies
View Related
Nov 15, 2010
I have configured postfix to send/receive mail from/to for two domains we manage. [URL] and [URL] Most of the cases there is no issue sending out or receiving emails. However, a few users of domainY.com complained that their senders were not able to sent them email. after much investigation, we started thinking that the mailserver failed to send us email may the failing on doing a SMTP Banner issue.
Is there anyone who knows how to deal with this SMTP banner issue with multiple domain. We want different SMTP banner when doing EHLO on different server.
530 mail.domainX.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
530 mail.domainY.com ESMTP MailEnable Service, Version: 1.981-- denied access at 11/16/10 10:51:21
View 5 Replies
View Related
May 30, 2010
At present, I have:
a Netgear router with DHCP off at 192.168.0.1 my computer
eth0 at 192.168.0.2
wlan0 at 192.168.0.2
The wlan0 interface always connects to the router, while the eth0 interface connects to other computers with crossover and acts as a dnsmasq DHCP server for network boot and installation.
If I use the Gnome NetworkManager to enable both connections, that is, with wlan0 connected to the router/internet and eth0 to another computer, both as 192.168.0.2, I cannot access the internet while eth0 is connected.
Why is this? How can I configure my computer to follow wlan0 for Internet usage, but use eth0 for itself (the latter is working but blocking wlan0).
View 1 Replies
View Related
Mar 29, 2010
I have a rather urgent problem with my network, I got two virtual network interfaces one internal and one external. The problem is; I can't get connection to internet. The external NIC is set as a NAT and the internal is... internal.
/etc/network/interfaces
auto eth1
iface eth1 inet static
address 192.168.1.200
netmask 255.255.255.0
Running with this configuration makes my internet connect go away, however if I remove the configuration for eth1 everything is working fine.
View 3 Replies
View Related
Feb 16, 2011
My question is about TCP parameters in Linux. By now, I want to change the default values of:
Initial Timeout
ACK Delay
Idle Connection Timeout
I have a Linux Box with kernel 2.6.x and 2 ethernet interfaces. I know TCP is a stack that doesn't have anything to do with ethernet devices. Said that, the question: is there a way to set custom values for each interface? For example, a server listening to connections in eth0 would use one value for Idle Connection Timeout and another server listening to connections in eth1 could use a different value for that parameter.
View 4 Replies
View Related
Sep 1, 2010
I have several multicast data feeds that I'm trying to connect to using a minimal server install of Ubuntu as a VM on a VMWare ESXi server.I have another VM on the same server running Solaris that can connect with no issues to the incoming multicast stream.
View 1 Replies
View Related
Mar 5, 2010
This is not a linux specific question more of a general network issue with the hope that someone may have already done this under linux.My problem:I have a red hat linux machine transmitting IP multicast packets onto an ethernet gigabit network (cisco switch).Wireshark (running on a different red hat linux box confirms packets on network.
View 4 Replies
View Related
Jul 30, 2010
If I have set up 2 network interfaces on a box, if I started sending multicast traffic, it will go out through both interfaces? Or is there a way to control through which interface it will go out?
View 1 Replies
View Related
Jun 23, 2011
For the last couple of days, I've been unsuccesfully trying to receive multicast packets on Ubuntu Server 11.04, and seen some strange things along the way. The program i use to test this, is basically http://www.scribd.com/doc/38224328/mcreceive-c.Now the network has been configured to forward me the multicast packets, regardless of the joins. So tcpdump shows me:
Code:
15:16:11.308952 IP 10.164.130.2.61417 > 224.16.17.23.47806: UDP, length 1400
...
[code]....
View 2 Replies
View Related
Dec 10, 2008
I've got an application that compiles in Windows and Linux and is using UDP multicast to communicate. I'm running it on a Windows machine, a Linux machine and a small board (Gumstix) that is running Linux as well. The Windows and Linux machines have no problems sending/receiving packets with each other. The Gumstix and Linux machines have no problems sending/receiving packets with each other. The Gumstix can also send/receive packets with two instances of the application both running on the Gumstix.
But when running on the Gumstix I can send udp multicast packets to Windows, but cannot receive them. (It works if I do point to point with a known IP port#, but not multicast.) I can run tcpdump on the Gumstix and see the packets, but they are not being received on my socket. Here's what tcpdump (running on the Gumstix) outputs when sending the same packet from different sources. Notice the IP header ID and flags (don't fragment) are different when coming from Windows.
WINDOWS to Gumstix
-7:-45:-2.015784 IP (tos 0x0, ttl 15, id 35331, offset 0, flags [none], proto: UDP (17), length: 444) 172.30.42.3.1165 > 239.255.183.180.47028: UDP, length 416
LINUX to GUMSTIX
-7:-43:-38.451991 IP (tos 0x0, ttl 15, id 0, offset 0, flags [DF], proto: UDP (17), length: 444) 172.30.42.13.32771 > 239.255.183.180.47028: UDP, length 416
GUMSTIX to GUMSTIX
-7:-33:-10.955608 IP (tos 0x0, ttl 15, id 0, offset 0, flags [DF], proto: UDP (17), length: 444) 172.30.42.110.1025 > 239.255.183.180.47028: UDP, length 416
I've tried everything I can think of to get this to work but am not getting anywhere. Also I'm pretty inexperienced when it comes to Linux. Anything I could try to be able to receive udp multicast packets from Windows?
View 1 Replies
View Related
Jul 29, 2011
In the ipv4 code i was using "ip_mc_join_group()" to join the multicast group. but i cannot find a similar function for ipv6 i have found one ipv6_sock_mc_join() but this function is not available for use with my module as it is not exported.
View 1 Replies
View Related
Nov 23, 2010
have a doubt about the multicast address.I have read that IP and ethernet multicast address have the same last 23 bits. While an ethernet multicast address always starts with 01:00:5E. Changing the last 23 bits of the IP address into hexadecimal form and "adding" them to the first 24 bits we find the ethernet address but what about the missing bit??? For istance I have: 230.11.111.10 = 11100110.00001011.01101111.00001010 So converting the last 23 bits I have b:6f:a The final ethernet address will be 01:00:5E:b:6f:a . And what about the missing bit?
View 1 Replies
View Related
