I have installed CentOs 5.5 with windows XP (dual boot) and then did an update. After rebooting Now grub is showing 3 items. Here is my grub config file before update:
#boot=/dev/sda
default=0 timeout=10
splashimage=(hd0,6)/grub/splash.xpm.gz
hiddenmenu
[Code]...
I am using kubuntu 9.04 dual booting with winXP. The package kit showed that I have 179 bug fixes. So I updated them.Now the boot time grub menu shows 6(two different versions for kubuntu and kubuntu recovery mode) entries instead of usual 4(winXp + kubuntu + kubuntu recovery mode + memtest). My grub.cfg file is as follows:
Quote:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[code]....
What is wrong. How can I change the entries. Which one to remove ?
I updated my grub yesterday using the command:
Quote:
sudo grub-update
and I rebooted and grub menu not coming now. I have a dual boot with Win7. Ubuntu 10.04 is installed with WUBI. I can run WIN7 but can't run Ubuntu now.
3 partitions (in order): Windows 7, CentOS and shared data partition.
I need to increase the size of the Windows 7 partition (c:windowswinsxs seems to be something not easily remedied).
GParted didn't work in moving things around (bad sector) so I wiped out its partition (# 2 out of 3) and I was able to increase the size of the Windows 7 partition (I can reinstall CentOS easily and not much work lost).
Except ... no more grub menu (unsurprising). This incantation does allow me to boot into Windows 7.
Is there any way of rebuilding the grub menu short of reinstalling CentOS (5.5)?
I recently installed virtual box on debian and after it had finished my terminal informed me that I could remove some "unnecessary" software by use of sudo apt-get autoremove. When I did this, some of the icons on the desktop changed and all of the icons in the drop down menu on the bar at the top of the screen also changed to ordinary folder symbols. The theme that I was using also went away. I restarted the computer and it booted back into a shell prompt with no GUI. I tried to get back to the GUI using alt+f7 but it didn't seem to exist
View 2 Replies View RelatedI'm using Fedora 15 on my Dell Inspiron 17R (dual booting with Win7) I'm trying to edit the GRUB menu after an update, but when I try to gedit the menu.lst file, I'm getting an error.
(gedit:1884): EggSMClient-WARNING **: Failed to connect to the session manager: None of the authentication protocols specified are supported
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting. Terminated Is this an error I can resolve? Did I do something to break it
I have a vista/ubuntu 9.10 duel boot laptop. Last week the screen was broken so it went back to the manufacture. Before that I rename the /etc/grub.d/10_linux file and ran grub-update so that Grub will only show windows boot menu (in case it confuses the repairman) now I have the laptop back and I am eating my own medicine.how to restore my ubuntu boot menus? I can now only boot into windows, although it seems like I can go to my ubuntu partition and change back my grub.cfg (which I did not backup!)but I can't remember the menuentry details.Is there any way, other than manually change my grub.cfg, so that I can boot into ubuntu again?
View 5 Replies View RelatedI dual boot Windows 7 and Ubuntu, and recently I updated from 10.04 to 11.04 via live cd. However, I now get the grub rescue prompt instead of the normal grub menu when I boot my computer.
View 1 Replies View RelatedI have manually added an entry for Ubuntu in my grub menu, using Yast. But every time the kernel is updated, this entry disappears. On the other hand, the one for Windows, that was added during OpenSuse's installation, is still there. So how can I keep this entry for Ubuntu ?
Edit : when I save the menu configuration in Yast, I get the following message :
Code:
Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
kbuildsycoca4 running...
kbuildsycoca4 running...
[Code]...
When I first boot up. I get the GRUB command line. What happened to the boot menu? And I can boot up into my Windows partition just fine. But when I try the other partitions i get "Unknown file system" or when I try to boot into the other ntfs drive, I get "BOOTMBR missing", but yet it does not mean Windows, because i can boot that just fine. I can't find my Ubuntu partition. How can I get the GRUB boot menu back?
View 1 Replies View RelatedI have a dual boot system: windows xp and suse(10.2). I had to reinstall windows(again). When I tried to use the installer, it kept reseting my partitions to 500gb+ to linux. Nothing I tried would let me put it to the way it was(50gb to linux). Repair install failed. Update wouldn't work. MSwindows in the grub boot menu disappeared. I tried reinstalling suse. The installer blocked any attempt by me to put the partitions back to normal. How do reset the windows and linux partitions(850gb windows, 50gb to suse linux)?
View 9 Replies View RelatedI am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
after doing an upgrade to 10.4 and updating grub I get this message. how do I address this
[Code]...
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies View RelatedI have installed ubuntu and Centos 5 , but when i do sudo update-grub , the new centos 5 is not detected. Some days ago i did the same (i installed ubuntu , and then Centos 5) , but i had to format the hard disk because some problems i had. The thing is that in that first time update-grub worked , but now not , why? Shouldn't be detected this time too? I have to manually add the new entry to the grub no?
View 4 Replies View RelatedI changed to 11.4 UBUNTU and now I do not any menu, because don't recognize my flat screen SAMSUNG SyncMaster 701n.
View 4 Replies View RelatedI recently moved from gnome to xfce in my arch linux box. After I added greek to keyboard layout some applications like skype, openoffice and vlc changed their menus in greek characters. English language but greek characters! Anyone got any idea what can I do with this one?
View 1 Replies View RelatedSuddenly the application launcher (the one that pops out when pressing the green chameleon button) has changed and I no longer get the formerly so pretty application launcher. Instead I now get a simple context menu style drop down menu.
I first noticed this after I updated PackageKit. is there a way to get this back to the previous applicationn launcher. When adding just the applet (without the button) it still looks the same, just the button doesn't pop it out anymore, as it chose to pop out a grey drop down instead.
This is on OpenSuse 11.4 KDE 4.5 and the latest desktop kernel
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
I want to edit the GRUB menu in ubuntu but Menu.1st is missing.When I open the /boot/grub.cfg from terminal I cant save it.
View 7 Replies View Related9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies View RelatedWe had a server failure this morning because grub was throwing error 15 (file not found). We discovered that the disk had changed names from hd0,0 to hd1,0. Making the appropriate replacements in menu.lst fixed the problem, but I'm still wondering what could have caused the spontaneous name change.
here are some other possibly related tidbits: * the server had been down because of a power loss, but it is behind a UPS so i doubt there is any electrical damage * eth0 also temporarily failed but the system failed over to eth1
My current theory is that when the bios was configuring the hardware the loss of eth0 shuffled around the addresses of the remaining hardware on the pci bus, which somehow caused the hd0/hd1 confusion. The problem is that everything i've read [URL] says that the drive assignment should be based on the way the disk is connected to the motherboard (which in this case didn't change)
I have been learning about Ubuntu since 8.10. I have my two computers running dual boot (W7 + 8.04 & Vista + 9.10).
Sorry if this is a noob question, but I have noticed that each time there's a new kernel (now I have 2.6.31.16-generic), the grub OS selection screen adds 2 lines:
- One for the new kernel
- One for the new kernel - recovery mode
So, since I installed Karmic (2.6.31.14) Ubuntu Update has added 4 rows and shows code...
What is the rationale behinf this?
Why would I want to boot using the previous kernel versions?
In my laptop, it's GRUB 2. How can I eliminate the unused options?
I have installed 2D Unity 11.04 on an old desktop PC. This afternoon I tried a newly burnt Fedora 15 disk just to see if Gnome 3 would run (no luck, better graphics needed, started in Fallback Mode). Anyway I tried the live Fedora disk out for a while then ejected it and rebooted to restart Natty. I was surprised to see the Grub screen now has an earth/space theme background with Debian logos. What happened to the default purple background? Natty booted as normal and I have not installed Fedora to the hard drive.
View 7 Replies View RelatedThis morning's update
root@squeeze:/home/me# aptitude update
[Code].....
I've executed the Update Manager, which ran an updating process that took long( ten minutes to half an hour, I think). Then, I was asked to restart the computer and I shut it down.2-3 hours later, I turned on the PC and here's how my desktop looks like since then(see attached screenhot).I guess that's the theme in releases 9.10 and lower. However, notice the window borders and title bars are just the same as before.Is this normal? If not, what could be the cause and what could I do about it?
View 6 Replies View RelatedI've got myself the curious situation where, when I boot the system, I can get grub to start, but it always drops to the prompt.
I can run:configfile /grub/menu.lst
and this brings up the menu with no problems, and from there I can boot the system to either linux or windows. What I don't understand is why it wont go to the menu in the first place?As far as I can tell, grub/Kubuntu got confused when installing, as each of the hd#,# settings in the menu.lst have needed tweaking to let the system boot. (e.g. windows is actually hd0, but the original install had it at hd2. Likewise linux is on hd1, but the menu.lst had it at hd0). I've happily tweaked these to make the system boot, but would appreciate any help in convincing grub to actually load the menu without me having to use the prompt.
I got ubuntu 10.04 lucid lynx along with windows (dual boot) and using Grub. On my computer, I have my C:/ (programs) and D:/ (data). I've never used my D:/ before that day that I've lost my windows partition on my grub menu. I usually use my D:/ with windows. The first time I used my D:/ to store data with linux, I lost my windows option in my grub menu. I'm not sure what I did wrong but I do want to restore my windows option in my grub menu.
After "fdisk -l",
I checked in /boot/grub and there is no menu.lst to modify. how I can get back my windows option in my grub menu ?
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...