I want to know How to set up Subversion server to run Multiple Projects? I want something to manage it over the web or manage it over kloxo as I am currently using control panel kloxo.
View 3 RepliesI am developing a system in Python that includes an engine and multiple front ends. I am doing the engine and a curses front end together and will add additional FE's later. My problem is that I don't know how to get my front end to import the modules from the engine. I have them set up in Eclipse (using Pydev) as separate projects, but in the same workspace.
I've been a developer for years, but this is my first Python project, and I'm also fairly new to Eclipse. I guess my question is, How do I set up the references to other projects of my own making?
Running CentOS 5.4 x64. Have successfully bridged eth2 with br2 by following the instructions here: [URL]../Networking (under the RHEL section) Have been running several KVM VMs successfully via this bridge.
I am now trying to bridge additional interfaces by using the same routine. Each bridge is named to correspond with the ethX device its bridged with.
Example of ifcfg-eth0 script:
DEVICE=eth0
HWADDR=00:16:76:D6:C9:45
ONBOOT=yes
BRIDGE=br0
[Code]...
So I have a pretty big networking nightmare on my hands right now. Stepped into the dog crap with this one, told my employer that I knew how to setup vmware servers right? Its not hard, install CentOS, install vmware, run the config tool, bridge the network, down the road we all go right? We have 3 servers running about 10 virtual servers.
Here is what we have all together.
CFU <- This is the internet. We have IP ranges xx.18.230 - xx.18.241 Gateway is xx.18.254 and subnet is xx.255.128
DELL PowerConnect 3348 Switch <- This is what everything is pretty much jammed into.
VMH1 <- This machine has 2 NICs
eth0 connects to the DELL switch somewhere on the upper 30+ ports
eth1 connects to the DELL switch on port 1.
It uses firestarter and is the gateway for our internal internet on 192.168.11.XX using IP 11.254. It has 4 vm's on it. One of them is the domain controller, hooked to eth1 using IP xx.11.1. The other one is a server for managing remote backups, it has an external IP linked to eth0 of xx.18.234. The other 2 vm's are for misc remote login stations that use internal ip addresses linked to eth1. It hasn't had a single problem communicating on either one of the ports..
VMH2 <- This server hosts a web server, and some other misc stations.
It hosts a web server on xx.18.230 and xx.18.231
It also hosts 2 workstations on a seperate network, through another router that is wireless....
Now, we have the problem child, VMH3
VMH3 <- This hosts...nothing. It sits and has a ton of storage, but does absolutely nothing, but won't communicate out either one of its network ports.
The xx.36.xx and xx.22.xx networks are there because we have multiple businesses in the building that shouldn't see each other.
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.
I'm trying to compile and install Subversion 1.5.6 on Centos 5.2.
I did:
And it seems to all go well, but when I run "svn" or "svnadmin" I get the error:
svn: error while loading shared libraries: libsvn_fs_base-1.so.0: cannot open shared object file: No such file or directory
I can't locate this file on my system, and I'm wondering where I can find this.
Im moving all my websites on a dedicated box. I had a cpanel hosting account, and now moving to a terminal and ssh system.I need some advice on choosing my mail setup. I need POP, SMTP, with multiple domains, as host for a few clients.I would like the most simple version.The server will only send +- 100 mails / day.I currently running Ubuntu Linux 10.04.
View 1 Replies View RelatedI have recently setup an Ubuntu 10.04 Minimal x64 Server. I plan on setting it up as a mail server. I need a secure server, that has spam prevention on it. Im setting up around 50 domains and would like a web based control panel. What is the most secure mail server, that i can setup for multiple domains?
View 2 Replies View RelatedThis is the current setup that we have: We have approx 20 clients who pay us to send out a type of e-mail called an E-Blast to their customers. We currently are using 5 Microsoft Windows Virtual Servers to do this. The problem is that those machines are starting to break down. There are times that it will take Microsoft Windows approx 9-10 hours to complete 1 job. This is way too long. We want to move away from Microsoft Windows for this particular type of job as it seems there are more customers who are wanting to use this type of advertising.
It seems that using a Linux Server "Command Line or Shell" environment would be the best way to go as there is no GUI like Windows. Since there is just text...that is something that would/should process very, very quickly.
I am in the process of setting up a new SMTP outbound mail server. This is the current software & configuration (what is installed on this new machine):
All of the customer data (Names, E-Mail Addresses, etc that these e-mails are going to) are currently loaded in a Microsoft SQL Database.
My machine that I am using is plugged into the DMZ. I have 1 ip address for the 1 network card. I have also added/bound 4 more ip addresses to that network card.
I have configured Postfix for Multiple IP Addresses.
I can, from the command line, send successful test e-mails and receive them in my personal account.
As far as I know everything is setup correctly. I can and will post requested information so that it can be verified that everything is setup correctly.
Here are a couple of my questions:
Ensure that I have my Network / Interfaces file and my Postfix's Master.cf/Main.cf files setup correctly?
How can I setup this server to be an Outbound SMTP server and get it to use all 5 of the IP Addresses to send these e-mails quickly?
What can I use to check and ensure that this server is in fact sending out emails on all 5 IP
Addresses (I heard that there is a program named "Postal" that may help in determing this).
Faced with disk-bound issues on a FTP server with high traffic. Would like to set up multiple FTP server nodes with dedicated storage for each node where all FTP access is managed by a master FTP server. So, a user would FTP to a single externally visible IP address for the master FTP server and then get routed to the appropriate FTP node. Are the mutiple FTP nodes required or is there a better way of doing this? Perhaps only one FTP server is required and then each node would serve as a separate file server
View 1 Replies View RelatedI'm running Fedora 10 with apache and I installed mod_dav_svn so that I could set up a secured remote code repository. It appeared to be working ok until I turned on SSL and basic Authentication.I even verified in my subversion.conf httpd configuration file that it is pointing to the correct password file. When I attempt to access it from my web browser, it prompts me for a user name and password, but it will not let me log in. I tried to disable SSL thinking that that might have been the problem, but I get the same results either way. Can anyone please help me resolve this problem?
View 4 Replies View RelatedI'm on their site, looking for the subversion server 1.6 download, and all I see is the client.
View 5 Replies View RelatedI am setting up an SVN server (svn+ssh) that will be used by students at the university where I work. I was considering in the beginning, one single repository and eventually creating directories for each project inside the repository. It seems to me now, that it is not very secure way of doing things. The directory on the server will be with rights 770 and this means that every student can come on the server and sweep out the whole repository.
Also mistakenly or not, every student can 'svn delete' the whole repository, which could be a nightmare to recover from. An issue might be to create groups and then assign users to groups and then create many repositories and each repository to be assigned with group. This means that I will have to manage tens or hundreds of repositories -- maybe not very common task. What is an optimal solution for this working environment.
Is there any way to setup the Centos Directory Server without an internet connection?? i tried using the command: yum install centos-ds
but this just tries to connect to the internet to to download the packages. Is there a site where i can find the package so that i can copy it to my server and install it or is there some other way to do this?
tried to subversion webaccess from browser,it is asking username and passwordsnter both.its asking again. how to login.configuration shown below
vi /etc/httpd/conf.d/subversion.conf
<Location /svn>
DAV svn
[code]...
I'm trying to setup RAID 1 on a CentOS 5 server for a zimbra email server.I get a partion schema error. Can I do this?The server is a HP Proliant ML150 G3 server with two 80GB HDD.
View 1 Replies View RelatedI'm looking to setup a home server for the purpose of backing up and storing the files on our multiple (Windows) computers. What kind of server should I set up? Samba? Lamp?
View 5 Replies View RelatedI am running Centos 5.5 with Apache 2.2.3, MySql 5, and PHP 5.1.6. I am migrating a Drupal installation to the default html folder for development purposes. I am very new to server management, and a bit lost.I want to install some other web sites on the sandbox server to experiment with before uploading them to a Production environment. Is it possible to have multiple html folders? Or to use symlinks to point to the folders where the other web sites will reside?
View 1 Replies View RelatedI'm trying to pass multiple dpmains thru one ubuntu server to various hosts on my local network.
[url] should be sent to the /var/www folder on the local host.
[url] should be forwarded to an IIS box on my local network (owa.nunya.local)
[url] should be sent to another ubunto box on my local network (smtp.biznet.net)
I have tried placing VirtualHost entries in /etc/apache2/sites-available/default and [url]and [url] both work but [url] gets forwarded to the c:inetpub folder on the IIS box.
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
What is the easiest way to setup an incoming and outgoing mail server on centos? Without using a control panel, such was webmin.
View 2 Replies View RelatedI am trying to get an X window server setup on my CentOS 5.3 server rack. I have gotten as far as to doing:
yum groupinstall "X Window Sever" "GNOME Desktop Environment"
EDIT-Forgot to mention that I did Xorg -configure before testing the config. Only errors I got were:
(EE) LoadModule: Module ati_r500 does not have a ati_r500ModuleData data object.
(EE) Failed to load module "ati_r500" (invalid module, 0)
[Code]...
Linuxquestions--I posted this over on the CentOS forums, which are not as booming. Then I remembered these forums for when I had my VPS way back when and you guys were pretty helpful, of course expected me to mostly do my own reading which I dont mind its just having a hard time understanding some of the things in what I was reading. I even believe I came here with this problem before but abandoned the issue because my VPS was not powerful enough or something of the sort, but this was many years ago also on CentOS using apt. Now using yum which I like much better.
I am trying to set up a mail server on centos5 using sendmail and dovecot, and eventually spamassassin and some antivirus filter as well. I'd also like to get the proper secure auth mechanism set up at some point too. But for starters, I've been having a lot of difficulty trying to even connect to the mail server from a client computer in the local network. I installed Eudora on the client and after some tweaking in dovecot I was able to connect to the mail server, but then when I try to send an email I get a "connection refused" error, with nothing being logged on the server that I can see.
The last time I set up a mail server was Fedora Core 2, so the configuration files have changed a bit to say the least, and I can't really refer back to those to set up this new server. Does anybody know of a good step-by-step doc on getting the mail server going? I've read the man pages and other various readme's, but these really only list out the available options with no really good explanation of what needs to be done to get the mail server going. If there isn't a full write-up on how to do this, I'll put something together when I'm finished so others can use it in the future.
I have just installed CentOS 5. I have set mysql database to access from remote machines. But now the problem is it is not connecting from the local machine now.
View 5 Replies View RelatedWe have two CentOS 5 servers in production (web and database). We are setting up a single staging server that will mirror the configurations of these servers as closely as possible. What is the easiest way to ensure the exact same software and configs as the production servers are setup on the new staging server. Our contracted data center provider has already informed us that they do not perform images and NO we do not have physical access to the machines. It is undetermined whether we will be virtualizing the staging server into two virtual servers yet, so for the purposes of this post lets assume we are not. I'm seeking a faster/more precise method than doing this by eye and hand.
Some information on our web server code...
i have kown how to lock file in subversion,such as ' svn lock tree.jpg'
but i don't down how to lock file folder,
i create the repositoryroject1
project1/trunk
/tags
/branches
/branch_user1
/branch_user2
i need to lock a branch before merging
and how to unlock the branch after locked
I am tring to run a few game servers on CentOS 5.5, this is a headless server I am renting and I do have root level access and am able to install or run anything.
For me to run a game server I need issue the following command: ./r1q2ded-x86_64 +set dedicated 1 +set ip 69.172.231.46 +set port 27911 +set game lithium +exec server.cfg &
I just recently purchased a vs from a company and i am trying to set up a web site on it with kloxo and set up the mail for it upon setting up the mail settings it says:
"It is very essential that you set the my name to a properly resolvable hostname, since otherwise, many public mailservers like hotmail will reject mails from your server"
Now this is my first time setting up a vs before i have set up linux vm's to get email access but that was about a year ago.
i try to install mysql-server how do i create a password for it
yum install mysql mysql-server
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
* base: mirror.optus.net
* updates: mirror.optus.net
[Code]...
I have a secondary IP (external/Internet, not LAN) for a CentOS box, what do I need to do to make the server bind to that IP as well as it's primary one?
View 2 Replies View Related