Motherboard: Intel DG45ID
Intel said they support RHEL 5
[URL]
I create RAID10 and install CentOS 5.3 X86 version It show error on install screen, and detect 4 Hard Disk. It cannot detect one logical driver, Does ICH10R raid function is work on CentOS 5.3 ?
I have two 150GB WD Raptors stripped in an INTEL ICH10R RAID0 array. Windows 7 is installed on it in a 100GB partition, there is a 150GB secondary partition, a 100MB system reserved partition created by Windows 7 and there is about 25GB unallocated space to install a linux distribution.My problem is the fake ICH10R RAID which does work only at the moment for me with Fedora Core 13 : Ubuntu 10.04 breaks it but i do not like FC13 very much. So i Googled and Googled for installation problems on this fakeraid and dmraid is involved there is a bug in it at least in Ubuntu 10.04 and openSUSE 11.2, with 11.3 my RAID is detected -> i have a MD RAID popup.
My question is : How to install properly 11.3 on the space left on my fake RAID array without breaking anything although i have a full backup of my system. I don't understand anything of the partitioning part of openSUSE in general. Do i must activate MD RAID, i tried once and my NTFS partitions were not displayed but RAID was detected with the correct size. I am totally lost with this installer.
I've googled my problem but I'm not sure I can find an answer in layman's terms. So here's my noob, simple question, please answer it in semi-noob-friendly terms I've been trying to install ubuntu for a while on my desktop pc. I gave it another go with 10.10 but I always have the same problem:
I've got two raid sets connected to an ich10r chip and they work fine in windows (2 samsung 1to + 2 raptors 75gb). Upon installation, dmraid only sets up the first raid set (Samsung array) but not the second one (Clean raptors intended for ubuntu). I don't have any other installation option, all my sata connectors are unavailable. So, is there a manual install solution? Can I force dmraid to mount the second raid set and not the first one? I think I read somewhere that this was a dmraid bug, but I can't find it anymore.
I have an i5 Thinkpad running Windows 7 64-bit. VT is enabled in the BIOS. I have installed vmware server v 2.0.2 but am unable to install Centos 5.5 x86_64 as a guest OS. The steps that I followed are as follows:1. Created a new VM, specifying RHEL 5 64-bit as the intended guest OS (per vmware documentation - Centos is not available as a selection2. Downloaded all 8 iso files for Centos v5.5 64-bit3. Modified the CD/DVD drive to 'connect at power' and use an iso with the path pointing to the x86_64 iso 1 of 8When I power up the VM, the console window displays 'ISOLINUX 3.11 2005-09-02 Copyright (C) 1994-2005 H. Peter Anvin' and nothing else. The installation splash screen never appears. As a test, I downloaded the first of 7 iso files for the 32-bit version of Centos 5.5 and pointed the CD/DVD drive to that iso. In that case, the installation starts as expected. I would really like to get the 64-bit version installed and running.
View 3 Replies View Relatedwhen i do a paravirtualised install coz fully grey out (how do you get round this) and ftp install path is ftp://192.168.1.1:65354/bie764.iso
i get error:
Unable to complete install 'exceptions.ValueError Invalid install location: Opening URL ftp://tj:tj@192.168.1.1:65354/bie764.iso failed.
Traceback (most recent call last):
File "/usr/share/virt-manager/virtManager/create.py", line 724, in do_install
dom = guest.start_install(False, meter = meter)
[code]...
does it not accept ftp passwords.. what ftp server program (with autostart so it works with crossover linux as i know no other way start apps with that. can try to insta wine but need rpm) will work
I recently installed openSUSE 11.4 at my desktop (Core i7 930, X58 chipset). All has gone really well, but I have a problem with the RAID 1 array in my system. I have created a RAID 1 array using the ICH10R controller, but in openSUSE I cannot access it. The array only contains one NTFS partition.
In Partitioner (in YaST) it shows the RAID array as "md126" and the partition as "md126p1". As mount point it shows "/windows/C *". It's the only storage device that is shows the mount point with an asterisk.
I tried to install centos 5.3 on my dell pc. I downloaded the large 3.69 gb dvd iso. file from 5 seperate mirror sites and burned the disk images. When I boot it did the disk checks and they have been all good. The problem I'm having is it starts the boot process lets me get to the partition settings and then goes to formating the harddrive then when it starts the install part it goes for a few minutes then gives me a error that it cant find a file (not allways the same file) and says the install sorce is missing a file or is corrupted. This is why I have spent a few days downloading from different mirror sites to see if that was the issue, they all cant be bad.
When I first attempted the install it installed grub for multi boots I dont think this has any problem with finding the files but who knows. I looked up on how to uninstall grub and you can not from the info on there site.The box is a dell pent 4 with one gig ram, two ide hard drives and it ran windows xp. I intalled fedora on the box and it ran fine w/ no install errors I just need to try and set up a server so I can install webgui's cms webhosting wre software. In there forums they said centos 5 is the best os for what I want to do.
I've downloaded the YUM RPM to a flash drive and double-clicked it in an attempt to install the RPM. Package Manager reported that the RPM is already installed. Oddly enough, when I try to open Package Manager itself, I get an error, "Unable to retrieve repository metadata. This could be caused by not having a network connection available." and the >Details are "Cannot retrieve repository metadata (repomd.xml) for repository: c5-media. Please verify its path and try again." (A network connection IS available...I'm posting from the server, right now!)
If I click on the Repository Manager button, I get the attached picture and assume that sll is well with those different configurations.
I have a very urgent problem that is nailing me down for days now: I was running CentOS 5.7 x86_64 very successful in a VM here. Now i wanted to install it on a native system here. So i burned the 8 ISOs to 8 CDs.
When i started the installation however, it is booting correct, (continue in GUI mode) and then finally asking me for installation language/keyboard layout, then it comes up with "CD Not Found" - "The CentOS CD was not found in any of your CDROM drives. Please insert the CentOS CD and press OK to retry" - what i did, several times, without success.
Next try: The DVD image. So i installed a torrent client, downloaded both ISOs, burned them several hours later -> same result. after going through the first steps (selecting install language and keyboard layout): "CD Not Found" - "The CentOS CD was not found in any of your CDROM drives. Please insert the CentOS CD and press OK to retry" - what i did, several times, without success.
So, last try: The NetInstall image. Downloaded the ISO, burned it, and yah! Finally, i can install CentOS. It took almost 6 hours to get through the installation. I got one error (Can't download 'something i don't remember'), i said retry, and it continued. So but now it hangs after startup. Mouse cursor is visible, blue nice 'wait' anim is playing, that's it.
I'd really want to reinstall it, and i don't trust the net install (i probably screwed up something else) - so how can i fix this damn CD drive issue? is the drive (oem something standard IDE thing) not supported or what?
I'm trying to mount an existing SATA RAID 10 set on a Gigabyte EX58-DS4 (ICH10R "fake" RAID). dmraid is giving me the following:
Code:
root@CyberShadow:/home/vladimir# dmraid -b
/dev/sde: 1465149168 total, "3QK0782F"
[code]....
I haven't tried to install Ubuntu in a while due to some frustrations during install previously. If memory serves I couldn't install it on to my ICH10R Raid5 boot array and I didn't want to give that up. So now I am getting the Ubuntu itch again.
here is my hardware:
Asus Maximus II Formula mobo
4GB G. Skill Ram
Intel Q6600 Quad Core
Soundblaster X-Fi Fatal1ty sound card
[code]....
So I downloaded the 64bit iso and attempted to install and very quickly ran in to a problem. The install is recognizing the array that has the bootable volume on it, but wants to erase the whole partition and use it all. On my laptop, it was able to install and share the partition with Windows 7.
I need to install Eclipse CDT 4.0 (or 5) for centos 5. I have the final version of centos 5.3.
I downloaded the Eclipse CDT version from here CDT 4.0 for Fedora and I tried to install the RPM as root.
# rpm -i eclipse-cdt-4.0.3-1.fc9.i386.rpm. The result for this command is:
warning: eclipse-cdt-4.0.3-1.fc9.i386.rpm: Header V3 DSA signature: NOKEY, key ID 4f2a6fd2
error: Failed dependencies:
eclipse-cvs-client is needed by eclipse-cdt-4.0.3-1.fc9.i386
[Code].....
A problem with installing CentOS 5.3 from DVD ...
I downloaded the CentOS-5.3-i386-bin-DVD.iso, after recording an image on DVD
Start the installation, selecting Installation Method, chose Local CDROM - Message on my screen: "CD Not Found"
P.S. md5sum matches with this website developer
What a problems?
Let me start by saying I'm new to CentOS. But we're getting a server with CentOS soon so I'm experimenting on a virtual machine for the moment. One of the things I'm going to test requires me to have wine installed on the CentOS box. I found that to install wine I need to use the command "yum install wine". When doing this nothing really happens. I get the following output on the screen:
Loading mirror speeds from cached hostfile
* base: centos.crazyfrogs.org
* updates: base: centos.crazyfrogs.org
* addons: base: centos.crazyfrogs.org
* extras: base: centos.crazyfrogs.org
Setting up Install Process
Parsing package install arguments
No package wine available Nothing to do.
I've already issued the "yum upgrade" command but my problem still remains.
Does anybody know of this issue or is there anybody who can help me with this?
I am using the latest version of Cont OS 5.I installed Sun Java into the Firefox browser and it works fine for web content but not for accessing my office Windows Desktop remotely. It seems that I have to install Sun Java at Root (I think).installing the latest version of Sun Java for the purpose of accessing my Windows Desktop?
View 1 Replies View RelatedHow can I install ssh?
I tried following:
yum install openssh
The installation works fine and on the last line appears: Complete!
But openssh is not working:
I tried
ssh root@172.21.35.110
-bash: ssh: command not found
Have you any ideas? The ping works to this maschine.
I checked the rpm (thanks to pSchaff)
rpm -qa *ssh*
openssh-4.3ps-36.e15_4.3
openssh-server-4.3p2-36.e15_4.3
Do I need additional openssh-client?
I tried: yum install openssh-client but without success --> it appers "nothing to do"
I want to install openvpn on ssh.when I write "yum install openvpn", I get an error message.this message : No package openvpn available. why i can't install openvpn ? How can i do ?
View 2 Replies View RelatedI cannot boot from the OS dvd. It says looking for boot info on CDDVD then boots right into an older version of windows that happens to be on the hdd. If I unplug the hard drive I can get into the CentOS installer but this is useless because the hdd isn't viewable as a place to install the new OS. I don't know if I need to format the drive before hand so that Cent has a clean slate or if there is a problem with the DVD itself. The later I dont believe so based on the working of the installer while hdd unplugged. The DVD drive is on its own ribbon and both hdd and dvd drive or set to primary master in DOS.
Aside: I have recenlty moved to centOS formally using ubuntu and messing around with fedora on another computer. I am using cent based on work with school, they recommended cent for project with professor.
I am unable to install DHCP in Centos 5.5.
View 3 Replies View Relatedi am using internet in my university hostel.there i am on Lan.my ip is ManuallY configured .
ip:192.168.x.x
netmast:255.255.255.0
gateway:192.168.0.1
and i am having problem while downloading repos via yum .
I've planed to install Ubuntu Lucid Lynx 10.04 x64 on my rig. dual boot setup windows 7 preinstalled Intel ICH10R RAID0 manual partition setup 200mb ext3 /boot 2gb swap 100gb ext4 / GUI installer can see my RAID and allows me to create this partitions manually. But when install begins i'm getting error :
Quote: The ext3 file system creation in partition #5 of Serial ATA RAID isw_dgaehbbiig_RAID_0 (stripe) failed
[Code]...
fdisk -l from Live cd shows me separated HDDs without RAID0 wrap (sda and sdb) Also in advanced section where i can configure boot loader default is /dev/sda, which is part of RAId_0. I'm checking isw_dgaehbbiig_RAID_0 as location for loader, assuming that this would be MBR. am i doing this step right?
I want to build a 6xSATA RAID 5 system with on of the disks as spare disk. I think this give me a chance of 2 of 6 disks failing without losing data. I am right? Hardware: Intel ICH10R First I will creat a 3xSATA RAID 5, after I will add the spare disk and after that I will add the others disks. This is what I think I should do.
[code].....
EDIT:I'm thinking in put LVM with the RAID 5. What are the advantages and disadvantages of it (LVM over RAID 5). It is safe? My MB (Asus P5Q) have Chipset Intel P45 ICH10R. What kind of RAID have it? Hardware RAID, fake RAID, BIOS RAID, software RAID? This are the specs of storage
[code].....
I have a CentOS 5.4 OpenVZ Virtual Environment running cPanel. I am trying to install nrpe to monitor services running on the VE, but there is a problem with the packages dependencies:
Code:
# yum install nrpe
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
[code]....
I have trouble to install gparted on centos55
yum can't find gtkmm-2.4
without it stops!
checking for GTKMM... configure: error: Package requirements (gtkmm-2.4 > 2.8 ) were not met:
No package 'gtkmm-2.4' found
[code]...
I am trying to install CentOS on my netbook and I am referring the following documentation: [URL]
However, after completing the steps mentioned in the documentation when I plug in the USB to boot in CentOS it says: Unable to find the kernel load image and then sits at the boot: prompt.
So I just got a new centOS box with PHP 5.1.something but I wanted it on PHP 5.2, initialy running
Code:
yum update php
returned
Code:
php-pecl-memcache-2.2.6-1.el5.x86_64 from installed has depsolving problems
--> Missing Dependency: php-zend-abi = 20050922 is needed by package php-pecl-memcache-2.2.6-1.el5.x86_64 (installed)
[Code].....
I want to install Asterisk gui using svn command, but I have the following error:
# svn co http://svn.digium.com/svn/asterisk-gui/trunk asterisk-gui
svn: PROPFIND request failed on '/svn/asterisk-gui/trunk'
svn: PROPFIND of '/svn/asterisk-gui/trunk': Could not resolve hostname `svn.digium.com': Temporary failure in name resolution (http://svn.digium.com)
we can't get the clients in our lab to do a kickstart install. we're doing the install by booting from the Centos 5.3 net install cd and anaconda starts, but terminates abnormally reporting a SIGSEGV fault. Interestingly, attempts at doing an install from a CD and without the network connection results in this error:
X11TransSocketINETConnect() can't get address for localhost:6001. Temporary failure in name resolution.
I have installed/enabled centosplus, by using the command: yum update kernel --enablerepo-centosplus
Now I seem to be unable to install nvidia-graphics. When I use the command: yum install nvidia-graphics, I get the error: package kernel-2.6.18-164.6.1.el5.centos.plus.i686 (which is newer than kernel-2.6.18-164.6.1.el5.i686) is already installed
The nvidia-graphics bit is coming from atrpms - the kernel is coming from updates. What exactly does this mean? Does it mean that nvidia-graphics has not been built for this version of the kernel (centos-plus)? I am hoping to use centos-plus, as I need the support for DVB cards.
This might sound like a really daft question but how the hell do I install CentOS 5.5? I cant find any guide how to install the dam thing. I ve downloaded "CentOS-5.5-i386-LiveCD-Release2.iso" & burnt this to a CD. I then booted my server form this CD. I see a very nice colourful screen which says "Automatic Boot in 10 seconds". After 10 seconds nothing happens. I then rebooted the server & this time I hit the enter key, I now see a menu with the following options:
Boot
Boot (text mode)
Network Instillation
Memory Test
Boot form local drive
If I try the "Boot" or "Boot (text mode)" options nothing happens. Selecting the Network Instillation appears to boot the install I then see a blue & red screen asking me to choose a language I picked English hit OK selected UK as the keyboard type hit OK Installation ethod...... Ive chose Local CDROM but the message says: The CentOS cd was not found in any of your CD drives.