CentOS 5 Hardware :: Techwell 6805 DVR Card In 5.5 For Zoneminder?
Nov 4, 2010
I just completed a build of CentOS 5.5 server to be used for Zoneminder using these awesome instructions: [URL]The problem I have is I am trying to use a DVR card that there must not be any drivers in the OS for. The card is an 8-port DVR card with a Techwell 6805 chipset. Using Ubuntu, I had to download the driver using this command "git clone git://gitorious.org/tw68/tw68-v2.git" I just wanted to try CentOS and see how it works out. I just dont know how to download the drivers for this card.
Running lspci gives this output for the card:
02:04.0 Multimedia video controller: Techwell Inc. Unknown device 6804 (rev 10)
02:04.1 Multimedia controller: Techwell Inc. Unknown device 6805 (rev 10)
02:05.0 Multimedia video controller: Techwell Inc. Unknown device 6804 (rev 10)
[code]....
View 16 Replies
ADVERTISEMENT
Apr 5, 2011
I have a camera in my house and would like to monitor it on my computer under Linux, but I am having problems with Zoneminder.I have a capture card with chip 878A (properly working), but Zoneminder don't show any image or data from the card.I installed Zapping (television program for Gnome) and the camera/card works, presented as device /dev/video0.I followed the steps in the Zoneminder's Wiki, but unsuccessfully.
View 1 Replies
View Related
Mar 30, 2009
very much like everybody i am also waiting for centos 5.3, because 5.2 could not sit on my notebook due to obvious driver issues. would anybody tell if centos 5.3 support my x3100 graphics card and bcm 4311 wlan card?
View 5 Replies
View Related
Jun 15, 2010
If i run lspci it shows lan card model, but lan card is not working. How do i check my lan card driver is installed or not?
Is there any way to list all installed drivers with hardware information like we have device manager in windows.
View 4 Replies
View Related
May 24, 2011
installing ZoneMinder 1.24 on openSUSE 11.4
View 1 Replies
View Related
Sep 30, 2010
I am find any zoneminder installation instructions for newbies like me. I did all the Ubuntu server install but can't find any docs on how to invoke ZoneMinder.
View 1 Replies
View Related
Mar 2, 2010
I have Zoneminder installed and mostly setup but I'm stuck. The problem is that I have No picture on the feed page and the source "/dev/video0" is red.
View 12 Replies
View Related
Oct 12, 2015
I'm trying to install zoneminder on my system (Debian 8 Jessie). I was trying to follow a guide on puccinellidigital, since I use nginx on my machine.
everything is OK, but I can't get the xinet to work
Code: Select allservice xinetd status
Code: Select all...
Oct 09 14:24:39 donnager xinetd[1102]: service/protocol combination not in /etc/services: zms/tcp
...
But if I check
Code: Select allcat /etc/services |grep zms
Code: Select allzms-inetd 85/tcp
# Zoneminder ZMS inetd-wrapper
View 1 Replies
View Related
Dec 30, 2009
i have been trying to set zoneminder on fedora 12, after all setup. i see black screen on monitor. pasting the error below.
[Tue Dec 29 23:28:40 2009] [error] [client 117.192.6.17] PHP Deprecated: Function ereg() is deprecated in /usr/share/zoneminder/www/includes/functions.php on line 808, referer: http://192.168.2.2:8080/zm/
[Tue Dec 29 23:28:40 2009] [error] [client 117.192.6.17] PHP Deprecated: Function
[Code]....
View 2 Replies
View Related
Mar 14, 2011
I've decided to give ZoneMinder a try with a simple USB webcam that I've had laying around. I installed it in a VMware machine, but I could not get the webcam to "pass trough" to the virtual machine, so figured I would install ZoneMinder on the "regular" server...
I installed it, got annoyed, and autoremoved it. Now, I'm trying to reinstall it using
Code:
apt-get install zoneminder
and I'm getting a bunch of errors,
Code:
Setting up zoneminder (1.24.2-2build3) ...
Starting ZoneMinder: DBI connect('database=zm;host=localhost','zmuser',...) failed: Unknown database 'zm' at /usr/share/perl5/ZoneMinder/Config.pm line 89
Can't call method "prepare_cached" on an undefined value at /usr/share/perl5
[Code]....
View 3 Replies
View Related
May 13, 2011
I just installed/configured Apache and also installed/configured Zoneminder to the best of my knowledge. I know Apache is running because I can go to http://localhost and see the simple webpage I made. Zoneminder starts fine and I added a monitor (camera) but when I click Monitor-1 to try and view the camera, it gives me just a black box where I should see the video. I think I'm very close, what do I need to do? I confirmed that my webcam is attached to /dev/video0 which is what I have it set to in the Zoneminder options.
View 5 Replies
View Related
May 25, 2010
I have Zoneminder 2.24.2 installed. It seems to work, however, when a client computer tries to use IE explorer to view the the camera the frame rate refresh is very slow (once every 10 to 15 seconds). If firefox is used to view it, it works at normal frame rate. What causes this?
View 2 Replies
View Related
Jan 26, 2010
This is my first time installing zoneminder, just downloaded the latest version and trying it on my slackware 12 box. I tested the card I ordered with xawtv and was able to see video just fine.
Zoneminder seems to start fine but I can't get it to stream video.
[URL]
That's what I get when I try to view. I'm not sure if there is a log file I can check to see if there is an error.
View 5 Replies
View Related
Nov 11, 2010
8.04 permissions. I have had ubuntu 8.04 running Zoneminder 1.22.3 for over 2 years with a capture card and cctv cameras. I just bought a Trendnet IP512p camera. My zoneminder box will not connect to it. The main error I get is, [Restarting capture daemon for ipcam, shared memory not valid], I am wasting time with shared memory settings. I just booted a live cd of 9.10 with Zoneminder 1.22.3 that I remastered from another system and the IP camera works fine. (It ran all night in the live environment.) From that test I have concluded I have a permission problem in my 8.04 install that is not letting www-data (the ZM process) access what it needs to grab the stream. From the same box I can stream the camera to firefox while using vnc to connect to it.
View 4 Replies
View Related
Sep 16, 2010
I am a beginner and just start with Zoneminder. I take Sony SNC RZ25P as webcamera. I have installed Ubuntu 10.04 LTS and Zoneminder v1.24.2. In its console, I configure HTTP mode and Remote host name 149.XXX.XXX.XXX but there is no picture shown and when I use probe in console,it reads "unable to probe network cameras status is 127".
View 1 Replies
View Related
Jun 2, 2011
Is there anyone here who has ever manager to get ZoneMinder Working on an Ubuntu Server?I have been having issues even after searching the net for all solutions.I have a x86 workstation and web cam: Logitech Pro 5000 Running Ubuntu 11.04 Server x86 Installed Linux Successfully.I have Tried to install ZoneMinder successfully and can connect via URL...I can camera's etc but cannot get anything through it.Bu not able to get this resolved and thought I wouldsee if anyone has ever manager to get this working on Ubuntu and can mentor me on this.
View 5 Replies
View Related
Jul 26, 2011
I'm running a Debian installation from which I installed zomeminder using Synaptic Package manager. I fixed several issues with deprecated functions and other miscellaneous stuff. Finally have it working fairly well.However, not quite....zoneminder keeps hanging up as a review the captures in iceweasel. I click on the id field in the table and the event view shows up. After I review several, clicking the delete button on each to move forward Iceweasel hang up with the pinwheel spinning. If I completely close out iceweasel I can then start reviewing again.The following error message appears in the apache2/error.log.
[Tue Jul 26 18:59:36 2011] [error] [client 127.0.0.1] socket_sendto( /tmp/zms-644018s.sock ) failed: No such file or directory, referer: http://localhost/zm/?view=watch&mid=1
[Tue Jul 26 18:59:36 2011] [error] [client 127.0.0.1] array (
[code]....
View 4 Replies
View Related
May 1, 2009
I just have CentOS installed and cannot get the Agere et131x network card to work.I have tried the following:Reboot the computer and still did not see the network hardware.
Fai
lspci
Quote:
[code]....
View 7 Replies
View Related
Sep 13, 2010
I've installed from the CD the Centos version 5.5. When I try to connect to Internet I can't because I received some errors. I've the Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) Ethernet Controller also a wireless slot (I've the wireless card DWL-G650+) When I turn on the pc and I go to "Ethernet Device", I see set: peth0 (Intel Corporation 82801CAM (ICH3) PRO/100 VE (LOM) ETHERNET CONTROLLER) and also set "Bind to MAC address": fe:ff:ff:ff:ff:ff I've set manually the IP address (I'm under router). Status is "Active" but can't go on the Net. When I change to "eth0 (Intel EtherExpress/100 driver)...sometimes become "Active" an other times said that the MAC address is different or to check the cable because can't find the IP. What can I do?
View 5 Replies
View Related
Mar 23, 2010
I currently have eight surveillance cameras setup that used to connect to a windows pc. I decided to throw away the old computer, take the dvr card from the old computer and use it in a new computer with ubuntu 9.10. However, till now I can't get the cameras to work.
I installed Zoneminder, and followed instructions from here and there with no useful results. What I currently have are monitors showing black screens, with the fps showing.
I am pretty much still a noob, so I am not sure where I went wrong. I do not get anything when i run XawTV (or maybe i don't know how to run it right).
when i run "lspci | grep Bt878" I get this
Code:
Following instructions from various places, this is what I have for the following files /etc/modules :
Code:
Code:
Code:
I followed the instructions for installing Zoneminder on Ubuntu 9.10: [url]
I also get some tips for setting up the tv card: [url]
What is confusing is I get a fps rate, which is a sign that the camera is working, but all i get is a black screen. The cameras used to work in the original windows setup, so i doubt that the cameras are not working.
View 2 Replies
View Related
May 4, 2009
I am using asus p5ld2-x/1333 motherboard,I installed the centos ,Centos saw other drivers but didn't see ethernet card.I am not connection the internet.
View 2 Replies
View Related
Aug 25, 2010
I just upgraded from Ubuntu 9.04 64-bit, to CentOS 5.5 64-bit and my RT-73 USB network card doesn't seem to want to function. It always worked fine in Ubuntu by default (plug and play). Is there some setting I need to make to get this working?Even BT-3 (which is quite old) recognizes the RT-73.
View 19 Replies
View Related
Jan 23, 2010
I have a Sweex USB webcam which I am trying to setup with ZoneMinder, however I cannot find the settings for it, and when I run:
Code:
I get:
Code:
Code:
Provide settings, or how to fix ZMU?
View 5 Replies
View Related
Jul 4, 2010
i like to use my DVB-C Card KNC-One on Centos 5.5 x86_64. But i cant get it to work. on a 32 Bit Centos this is working like a charm. I tryed several different kernels together with the video4linux-kmdl
At the moment i am using this kernel: 2.6.18-194.3.1.el5.centos.plus
[Code]....
View 8 Replies
View Related
Apr 29, 2010
I have a system that has very limited disk space on /var and everytime I attempt to do any updates to the system via update manager it was always error saying that there is not enough disk space. I wanted to know how I can change the download directory of the update manager to a partition with more space?
View 9 Replies
View Related
Apr 13, 2009
I installed CentOS 5.3 on my Shuttle SS-31T with SiS 190 network adapter. While booting the message "Bringing up eth 0 [ OK ]" appears. After booting it isn't possible to surf to an internet location (p.a. www.google.com). It's also impossible to ping other machines in the network. After typing ifconfig everything seems to be ok.
ipv6 is turned off
IP : 192.168.0.3
Subnet : 255.255.255.0
Gateway : 192.168.0.1
View 9 Replies
View Related
Nov 20, 2010
I have a Centos 5 server on my LAN for testing the websites that i develop.It worked perfectly until this morning , after cold start -up, it seems that my network card is not enabled . Everything works normal:gui and terminal but no internet access. I'll run some commands on my Linux box and write the results , by hand , to this forum .
* uname -r : Linux Server 2.6.18-194.26.1.el5 i686 i386
* ifconfig eht0 : eth0 : error fetching interface information
* ifconfig -a : I get only results for loopback (lo)
* less /etc/modprobe.conf : alias eth0 sis900
* lspci |grep -i eth : 00:04.0 Ethernet controller :Silicon Integrated Systems [SiS] sis900 PCI Fast Ethernet (rev 90)
[Code]...
View 1 Replies
View Related
Jan 21, 2010
I would like to add a PCI TV card to my CentOS box. My internet provider has given me a TV box (TV over ADSL) and even though I don't have / need a "real" TV set I would still like to be able watch TV on my desktop PC.
Could you recommend any cards/chipsets working well in CentOS? The card should have a tuner (one will do, there will be only one source, not a "real" antenna), and video/audio coming from the TV box (output from it has a SCART connector, but I can get an adapter for converting that into pretty much any other video output). Ideally it would have a DVB-T tuner as well as analog, but that's not strictly necessary since the TV is received by the ADSL box. I am thinking about Hauppage WinTV HDR-1100 [url] has anybody made that card work in CentOS?
On another note, there seem to be quite a few USB-stick like TV cards. Would that work in CentOS? I imagine that there isn't a great deal of hardware inside of these, and I don't want to upgrade the CPU because the machine needs to use a SW decoder.
View 1 Replies
View Related
Mar 18, 2010
I have centos 5.4 with kernel 2.6.18-164.el5, i want know what card for 100mbit or better connection is good solution, some hints for network card? What do u think about this cards?Intel Gigabit CT Desktop bulk - EXPI9301CTBLK or something different for game server?
View 3 Replies
View Related
May 9, 2010
I'm using the latest Centos on an older IBM server which only has USB1.1 ports, it works great and is very reliable. I would really like to add a USB2.0 card to the system. Can anyone recommend a reliable PCI card which will work with Centos, preferably one which does not require any special drivers to be loaded.
View 1 Replies
View Related
