CentOS 5 Hardware :: Monitor Remains Black And System Hangs On Restart
Dec 22, 2009
I just recently purchased a DELL PowerEdge 2850 and have tried installing CentOS 5.4 on it. After the install completes and it does a first boot I get the following error on the DELL console: PROC 1ERROR, PROC 2ERROR E07F0. The monitor remains black and the system hangs. Just out of curiosity I installed Fedora 11 on it to see if it was a hardware problem. Fedora installed and booted no problem. I rebooted with Fedora installed several times and left it running for 24 hours. Everything is working great. Is there something I am missing in the CentOS 5.4 install?
Below is the Hardware Config:
Dell PowerEdge 2850
PERC 4eDi RAID Controller
8GB PC-5300 ECC Memory
2 Intel Xeon CPU Dual Core 2.8GHz 800FSB 4MB Cache - SL8MA
ATI Radeon 7000 Video Card
View 5 Replies
ADVERTISEMENT
Apr 5, 2009
With the 5.3 CDS I started an install got through to 98% of CD 3 but I was called away. Came back this morning and the box was on, but had frozen. Every time I reboot, cold boot, I come up with black screen. Vers 0.97 <grub> Minimal BASH-like line editing is supported. TAB etc. Is there a way I can get to CD 4 and continue the install, or am I back to the top again?
View 1 Replies
View Related
Jan 28, 2010
I upgraded all xserver-xorg packages in my notebook. After restart system Xorg (GDM) don't run. My screen is black. If I will go to console CTRL+ALT+FX, screen is black too. I will go to console only in single-mode and I tried run dpkg-reconfigure xserver-xorg, but without results. I haven't got /etc/X11/xorg.conf in my system. I have got integrated Intel graphics card.
View 4 Replies
View Related
Jul 17, 2009
I used this command on Fedora11 for panning on my Acer Aspire One 150 it works but the next time that i restart the OS i have to issue the command again!
xrandr --output LVDS1 --mode 1024x600 --panning 1280x1024
View 3 Replies
View Related
Feb 4, 2010
whenever I open system monitor, I just get a loada black and white lines, I have no idea what this is, this never comes for any other application/program and it stops me from being able to kill non-responding processes.
View 6 Replies
View Related
Dec 20, 2010
So I'm pretty awful at keeping Debian up to date, I guess. I'm using cron-apt to fetch updates every night, then apply them whenever I get around to it. Well, I neglected that last part for a month or two, and after some routine downtime to clear the case of dust, I decided it was time to upgrade. So I ran the command, everything checked out fine, and I was on my merry way. Until a half-hour ago when I accidentally shutdown the computer (I use the same zsh prompt on each computer, so I got them confused.) I turned it back on, only to be greeted with a black screen after all the services started up.
Everything works: ircd, MPD, etc. EXCEPT, of course, X. At first I thought the update broke SLIM, but after checking htop and doing a killall slim, it doesn't appear to be running (the screen remains black.) I hit Control-Alt-f2 to get to get back to a terminal, then tried doing startx, which freezes the computer entirely. All the network services stop, I can't SSH in, etc. It's dead. If I'm not mistaken, Xorg.0.log should say something, but I'm not a huge expert on it. The last line isn't an error, I can tell you that. So what's the deal here? apt-get remove xorg and start over?
View 1 Replies
View Related
Feb 20, 2011
I recently came to Debian. As I have an ati card, I tried the proprietary drivers first, but then came back to radeon (open-source). In the process, I think I may have broke my xorg.conf . Sometimes, when the monitor goes into sleep mode, when I came back, the screen remains black (sometimes I see just the cursor).
Here is my xorg.conf
# NOXORGCONFEXISTED: No X.org configuration file existed when this backup was created.
Also, I have lots of backups in my X11 folder, like xorg.conf.fglrx-3, xorg.conf.original-1, or backup.xorg.conf. Is it safe to remove them? What should I do about the main xorg.conf?
View 7 Replies
View Related
Nov 30, 2009
I'm a newbie to installing LINUX (was an Oracle DBA for many years) and I am having trouble getting the dual head function to work with my Sony Vaio laptop. I just select a generic LCD with the screen resolution that I want, but when I startx, I briefly get the login window (terminal), then everything goes blank and I have to unplus the samsung monitor and reboot to be able to have a screen again. I have tried the fn + f keys and that doesn't help.
Here is the hardware:
Samsung Syncmaster 2343BWX
Sony Vaio VGN-FJ170
Intel Graphics Mobile 915GM/GMS/910 GML Express graphics controller
I would like to use this laptop as:
Audio streaming from internet (so far not working on my local NPR stations)
Hooked up to KVM switch - using the Samsun monitor and an adesso integrated keyboard
Wireless network (that is working - but it took some doing....)
What files and logs I need to post I will do so, but if what I want to do is just not possible or a big hassle, please just let me know, and I will load windows. Although I really wanted one LINUX box in my home office.
View 1 Replies
View Related
Sep 6, 2011
I've started facing the weirdest problem. I have to restart the ethernet interface a couple of times a day and everytime i do that the server locks up completely and i have to hard reboot it.info: recently shifted to a new server, all new components and new installation, OS version CentOS 5.6
View 1 Replies
View Related
Aug 20, 2010
after a successful installation of the latest debian testing amd64 kde CD-1 iso, the monitor shuts off about 2 seconds after passing the grub2 menu while computer remains powered.
View 7 Replies
View Related
Jun 11, 2011
I have a problem with my Debian squeeze system. After I have run some CPU-intensive application for a while the system becomes sluggish. Ok, maybe one would expect that. But. The system remains sluggish even after that process has been killed and then top shows high cpu usage from unrelated processes and a high %sy percentage as well. I don't really know where to begin solving this problem except I've checked that this is specifically related to (at least) CPU use as opposed to heavy memory use or IO (by running an application with low mem/no io but high cpu use). I am running the latest standard kernel from squeeze, 2.6.32-5-686. Also, thing is, I remember having similar problems with other Linux distros before, where for example gzipping a large file would cause the same. I did not have similar problems on {Net,Open}BSD, so a hardware fault seems an unlikely reason to me.
View 7 Replies
View Related
Aug 10, 2010
I recently installed centos 5.5 on a new system, details below. All worked fine for a couple of weeks, then the system froze up. No network access, no keyboard/mouse, blank screen. Had to reboot. Happened again about a week later. Then started happening every couple of days, then daily, and today it happened three times.
I see nothing unusual in any of the logs. The freezing does not seem to be correlated with any particular activity. Happened in both gnome and kde. While it's up, everything seems to work fine. I looked on the intel site for a new driver for this chipset but didn't find a linux version. I tried different versions of this same kernel (PAE, centosplus etc) but have not tried an older kernel.
I installed memtest86 (with yum) but when I try to start it from grub, the screen goes blank for a few seconds, then it reboots. Can't get it to start. Tried a bootable memtest86 cd that worked before (couple of years ago) and it wouldn't boot from it (bios is set to boot first from cd). Maybe this is a strong hint?
My next steps are to burn a new cd of memtest86 and try that. And/or to start removing ram to see if any of them are the culprit. In the meantime I'm asking if any of you have had similar problems with this architecture, or have other suggestions of things I could try. I don't have pieces of hardware lying around that I can easily swap in and out, unfortunately. If all this fails I'll try FC13. Any advice on whether or not you think that might fix the problem would be appreciated, before I go to the trouble.code...
View 6 Replies
View Related
Aug 7, 2011
I am having problems getting my external monitor to work. When I plug in the monitor, both the laptop screen and the external monitor go black. When I unplug the monitor, the laptop screen works again.
When I startup with the external monitor plugged in, neither screen works or teh computer hangs or something.
I have had the external monitor going on a couple of occasions. I did manage to configure my monitors through System Settings > Display. I turned off the laptop monitor as I just want to use the external. But after rebooting, things didn't work.
I have a Thinkpad E420, Fedora 15
View 14 Replies
View Related
Apr 30, 2011
I have just finished the upgrade of the latest version and I'm at the point of my system restating.
My system automatically tried to restart but on the restart I got the 'terminal' view. It stopped when asking for my username (it never normally asks for this before the grub menu) and then password. I didn't get any further than that.
I now have on my screen (still in the terminal view before the grub menu)
"name@name-desktop:...$ "
I'm on my phone now so I don't actually have the symbol for before the dollar sign but your know what it is. The raised S on a 90 degree angle.
View 6 Replies
View Related
Dec 2, 2009
If I remain 'connected' (with the KVM) to the linux machine the gnome screen saver cuts in and the system remains 'as is' until 'woken up' with the mouse or keyboard. However, if I switch to another machine using the KVM, within a short time (maybe even minute or two) the linux machine goes dead. Now it has not crashed, as I can log in from a remote machine and do anything I need from a terminal, but the machine seems not to respond. I can't even use ctrl-alt-fn to switch to a console screen.
I initially tried entering telinit 3 from a remote machine but it made no apparent difference. However, if after telinit 3 I then killed the Xorg process and later issued a telinit 5 the X server restarted, but with a curious black 'notch' at the top of the screen. I am using an NVIDIA GeForce 7600 GS graphics card. I am now adding the backtrace from Xorg.0.log. It seems that when the KVM switches to another machine for more than a very short time the X server crashes.
[Code]....
View 2 Replies
View Related
Apr 27, 2011
When I logout Gnome session, the whole system reboots. I found this command, "gnome-session-save --kill", it restarts the system, too.That's what is happening with two of my Dell destops(CentOS 5.6). How could this happen?
View 4 Replies
View Related
Nov 29, 2010
This was working perfect and all of a sudden stops. Now when I try and start this service it simply hangs. I have searched and found a ton of reasons why this could be. No fix yet as worked.
View 8 Replies
View Related
Jan 9, 2010
I just upgraded my system's motherboard with an Asus M4N78 Pro and did a clean install of 9.10. The install seems to go fine but when it finishes and does the final restart I seems to get stuck at the place you'd normally see the GRUB menu. Instead all I see is a black screen with a flashing cursor in the left corner. This isn't just a long boot, its stuck. It never progresses past this point.
During the install everything seems fine. Video, network etc. I've tried several reburned CDs and I get the same result each time. For the record I've installed Ubuntu as a single partition an IDE drive. The bios is set to boot from that drive. ow the heck can I figure out what is happening? Is there a way to boot and display any and all messages displayed? Is this thing hanging in GRUB somewhere?
View 4 Replies
View Related
May 20, 2011
Completely new Gateway dx4850-45, installed 11.04 64 bit.
Symptoms:
- Both restart and shutdown hangs, have to hold the power button to kill it.
- Once the screen saver kicks in it hangs,
- Try to reinstall using 11.04 and 9.10 and they both hang. On the screen there is briefly some ascii text talking about "... found 2 index files ..."
View 2 Replies
View Related
Nov 29, 2009
I am booting centos 5.3 on x86-64 machine. The system hands at line "Starting xend:". Is there any way to skip starting xend service during boot or disable it during boot so the system finally reboots.
View 3 Replies
View Related
Jan 8, 2010
I am booting centos 5.4 on machine. The system hangs at line "Applying iptables firewall rules".Is there any way to skip starting iptables service during boot or disable it during boot so the system finally reboots.
View 1 Replies
View Related
May 23, 2010
10.04 runs perfectly most of the time, then every once-in-awhile it crashes. The screen goes black and I have to restart. I had a similar problem with 9.10, so I reverted back to 8.04 which never crashed. I did a fresh install of 10.04.
View 9 Replies
View Related
Dec 30, 2009
I have a SMB share being mounted during boot using a /etc/fstab entry.All that seems to work fine, but on shutdown or reboot I found that the system hangs for a variable period trying to unmount the share. It appears from the log that the unmount is happening after the network connections are closed.Is there someway around this, or is there some other way I should be mounting the share so that it is closes successfully at restart or shutdown?
View 1 Replies
View Related
Jul 2, 2010
I have a Dell desk top PC, running WinXP and Ubuntu 10.04 LTS with a Ge-Force FX 5200 video card. In trying to get both monitors to work properly I thought it would help to reinstall Nvidia binary X.Org driver V173. After I removed the driver I tried to restart the computer with Umbuntu, it hangs up at the Ubuntu logo. I can boot with the live disk, I also tried to reinstall the Nvidia driver But the machine still will not boot from the hard drive, it will boot into Win XP normally.hould I just reinstall Ubuntu or fix the problem I created? My skills working in Terminal are minimal
View 7 Replies
View Related
Jun 25, 2010
Have tried to install 10.04 from a cd sent to me by ubuntu. lts on an x-windows medion pc mt7 (med mt 345). Previously comp. was running windows xp pro. After pressing restart at end of install process I get nothing! Black screen, no mouse control , no keyboard control, nothing at all.
Have tried putting cd in again but get nothing, on pressing restart the cd was politely ejected. Have tried rebooting a few times but get no response. Everything is switched on. So now I cannot even get a terminal up, the only thing I am fairly certain about is that the computer is sending a signal to the screen as there is Not a "no signal" message.
View 4 Replies
View Related
Jul 23, 2010
[code]...
this is my AGP card. My problem is while using ubuntu.. i experience sudden black screen and when the black screen appears it appears for forever until i restart the my computer, it happens suddenly and many times and im having this problem in ubuntu only never experienced in windows.. as i kicked of windows and using ubuntu so i am having this problem regularly. I am using Ubuntu 10.04 Lucid. Ram 512. And i am 10 days Old in ubuntu
View 2 Replies
View Related
Aug 19, 2010
I'm running ubuntu 10.04 on a new pc I just bought. Every so often the monitor will just shut down and display a message: "no signal input". I'm sure the computer is still running though because the fan is still running and all lights etc. are still on. I've tried switching the monitor on and off and there is still no input signal, the only solution is to reboot the entire computer.
View 9 Replies
View Related
Nov 11, 2010
A few glitches aside, 11.2 has been very good. Today I installed realcrypt. While in yast, I noticed some other items were set to install. I accepted them along with realcrypt. After the install, clicking the -more applications- button (gnome) did not display the menu, just the mouse wait indicator. After a few tries, I decided to restart. Clicking shutdown did not present the normal menu, but instead instantly shutdown. On restart, I noticed 3-ish orphaned inode(?) messages. After boot completes I'm left with a black screen.I'm running 11.2 Gnome raid-1. The raid array appears to be fine. It emails status on boot, and I received those emails (via google) on the my laptop. I can boot to runlevel 1, so the question is, once there where do I look for cause / fix.
View 5 Replies
View Related
Aug 7, 2011
i cant install my graphics drivers. Everytime i do, i get a black screen of nothing on restart. I'm running ubuntu 10.10. here are my graphics cards.
[Code]...
View 1 Replies
View Related
Jul 25, 2010
so I have Ubuntu 9.10 on my Dell inspiron 1150 and I wanted to upgrade to 10.04. I do the upgrade with the update manager and it dose all the installing. It restarts and goes to the purple screen with the white and red dots for about a minute, then it goes to a blank screen and sits there. i let it sit over night and it still didn't do anything! I've tried booting from CD and it dose the same thing! its bugging the heck out of me!
View 1 Replies
View Related
