i am trying to install the GD2 extension for PHP but i am not sure how to do this. i have try the
yum install php-gd
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Could not retrieve mirrorlist http://apt.sw.be/dries/fedora/fc4/mirrors-rpmforge error was
[Errno 14] HTTP Error 404: Not Found
Error: Cannot find a valid baseurl for repo: rpmforge
after changing in the server the network configuration of DHCP to have an IP set, every time I run yum update I get the following error:
Error: Cannot find a valid baseurl for repo: rpmforge
And I noticed that every time you reboot the server the file resolv.conf is erased
I have a server running centos 5 located in a datacenter. I am setting it up as a web server but haven't bothered to move the domain from my current registrar to the server as there are a lot of things I need to get done before that. I am having a problem where I couldn't install httpd. So i tried some of the basic fixes i knew as far as yum clean all and checking that my /etc/resolv.conf was ok. I have the two nameservers I am using listed there but I have no hostname set because I simply dont have the domain transferred or anything like that yet. Is that the reason I am having these issues. I installed the system with a network install fine about a month ago so im not sure why I am having problems now.When i try to ping centos.org I get an unknown host www.centos.org error. I tried changing the resolv.conf to have localhost as the hostname and I still have the same issues. I havent made any changes to anything that would potentially cause this.
My etc/resolv.conf looks like this:
search
nameserver 12.34.567.8
nameserver 12.34.566.8
Also it seems the problem may have got worse after yum clean-all because before that when I would try 'yum install httpd' it would show the files and filesizes and ask to install, when I would select yes It would give an error showing it could not find the fastestmirror. Now it doesn't give any file size or files or an option to approve the install. It just responds with an error saying it could not retrieve mirrorlist
<urlopen error (-3, 'Temporary failure in name resolution' Error Cannot find a valid baseurl for repo: base
I recently did my first installation of centos on a vm. I tried playing around for a while but when I tried doing an update it says Determining fastest mirrors for a while then gave me Could not retrieve mirrorlist [url]
Error was
[1] 13506
[2] 13507
Cannot find a valid baseurl for repo:addons
When trying to run 'yum update' or 'yum install' i get the following message:
Quote:
# yum update
Loaded plugins: fastestmirror, kmod
Loading mirror speeds from cached hostfile
YumRepo Error: All mirror URLs are not using ftp, http[s] or file.
[code]....
I have a VPS with Fedora 13 32 bits.
[root@mbr ~]# cat /etc/fedora-release
Fedora release 13 (Goddard)
[root@mbr ~]# yum install cyrus-sasl-md5
Loaded plugins: fastestmirror Repository updates is listed more than once in the configuration Determining fastest mirrors YumRepo Error: All mirror URLs are not using ftp, http[s] or file. Eg. 13 is not a valid release or hasnt been released yet/ removing mirrorlist with no valid mirrors: /var/cache/yum/i386/13/base/mirrorlist.txt Error: Cannot find a valid baseurl for repo: base
I tried
# yum clean all
# yum list
i was installing YUM GROUPINSTALL 'DEVELOPMENT TOOLS' but in start i got an error saying "Error: Cannot find a valid baseurl for repo: extras". how can i solve this issue?
View 3 Replies View RelatedI keep getting the following error when trying to install anything:
Could not retrieve mirrorlist http://mirrors.rpmfusion.org/mirrorl...d-11&arch=i386 error was
[Errno 14] HTTP Error 404: Not Found
Error: Cannot find a valid baseurl for repo: rpmfusion-free-updates
So this tells me the servers are down however if i put the link in FF I don't get 404.I am installing on a new box and I can't get the stuff I need.
when I run 'yum install ...' this error apear
Quote:
Cannot find a valid baseurl for repo
Hi, I am trying to add the RPMForge repo by following this guide [URL].. But when I try to verify the package I have downloaded, I get the following message
Quote:[sauro@localhost ~]$ sudo rpm -K rpmforge-release-0.5.2-2.el5.rf.*.rpm error: rpmforge-release-0.5.2-2.el5.rf.*.rpm: open failed: No such file or directory
I don't know if this would be usefull to others but since we are using kickstart and then running post install scripts I needed a way to add rpmforge and set the yum-priorities for it correctly via script and here is what I cam up with. If you want to use go ahead (make sure you comment/uncomment the correct repo for your architecture). also not the ex commands are whitespace sensitive. If anyone sees a way to improve this let me know.
View 2 Replies View RelatedI keep getting this error for RPMFORGE:
Am I the only one getting this error?
I tried yum clean all and yum clean metadata, but I am still getting this error.
The main Fedora repo file has this entry: baseurl=[url]
I want to know about the "$xxx" dollar sign bits - $releasever $basearch
I know from browsing there and certain mirrors that they contain directories for 13, 12, 11. So does that mean the file entry is just a "general" line but the version installation of yum _knows_ it should put 13 against those 2 entries?
IOW, does the background python script or binary expect to see that actual use of the dollar sign parts in the repo file?
I tried to make a new entry baseurl with a known mirror, making appropriate changes for its directory structure _and_ using the $xxx bits but on trying it out got errors usually about "repond.xml" and/or "gpg-keys".
I omitted them next just using the actual letters - .../releases/13/Everything/i386/os/
I wasn't paying proper attention when adding a repo to yast and need to find the file were the info is saved to delete this. The problem is that whenever i use yast it comes up with an error code saying that it can't find the data for the 'problem' repo. Have tried zypper rm but that comes up with a similar error advising that the data is in a format that was not expected. My thinking is to track the file were the yast repo source details are saved, delete this and then just add the repos that i use back.
View 6 Replies View RelatedMy problem is configure and start FTP server on own computer. I edited configure files, and i try to run ProFTP. Then i see that communication: Launch proftpd: - warning: unable to determine IP address of 'dhcppc1'
- error: no valid servers configured
- Fatal: error processing configuration file '/etc/proftpd.conf'[FAILED]
I am trying to install ffmpeg on an amazon linux ami (centOS red hat) and using yum with rpmforge repo added. I cant install ffmpeg because of a dependency error: and/or SDL-devel do not seem to be in the repository, any tips for resolving this dependency error would be much appreciated.
View 4 Replies View Relatedwhen i want to install centos 5.5 i take this error:
An error occurred - no valid devices werefound on which to crate new file systems.
my hardware specification is:
motherboard: gigabyte p55a-ud3
ram: ddr3 crucial 4gb
cpu: corei5 750
hdd: 2X1TB wd black edition raid1
I've been having problems installing httpd (in that it cannot be found when I do a Yum search). I get this error when running yum:
Bad id for repo: CentOS5 base, byte = 7
Bad id for repo: CentOS5 updates, byte = 7
I am going through creating a document on how to install Zoneminder on CentOS.So I decided I would do a new build and capture the output, dump it to a file, then post it.However, seems like sometime over the past 10 days or so when I did it last, one of the repos I use to download other software is now gone.I use this as an additional repository:Except, now it is not there anymore. Does anyone know its whereabouts? :)Some of the things I have downloaded from there which dont seem to be in the yum repos are: git, ffmpeg, htop
View 1 Replies View RelatedI'm in the process of creating local repos for our company servers (CentOS 5.5) and laptops (Fedora 13). And while the CentOS part went perfect the Fedora part is causing major trouble.But first things first, here's the setup: a central CentOS 5.5 server is running Apache2 and has a VirtualHost listening on Port 8080 for both CentOS and Fedora. The DocumentRoot for this VirtualHost is /data/repo wherein two directories, centos and fedora, reside.
This is the .repo-file for CentOS that works like a charm:
Quote:[local]
name=CentOS-$releasever - local packages for $basearch
[code]...
I've compiled the kernel 2.6.33, configured it and installed (make install)
When it boots up I get the following messages: RAMDISK: I can't find a valid disk image at 0 VFS: Couldn't open root at /boot/vmlinuz-2.6.33mykerne1 or block (0,0)
Code:
My current system configuration is:
Linux domenico-laptop 2.6.24-16-generic
/etc/boot/menu.lst
titleUbuntu 8.04, kernel 2.6.24-16-generic
[Code]....
I try to do a upgrade on my fedora 6 ill 10. But when I try to write yum update or yum upgrade on my server a get this error:
yum update
Loading "installonlyn" plugin
Setting up update process
Setting up repositories
Error: Cannot find a valid baseurl for repo: extras
Specifically, I'd love to know what the valid values of:
And, where I can find this information? I've always wondered if it was documented somewhere, or if there was an interface into the kernel to query for it.
I'm logged into a server through the CLI and did a df -T and confirmed all my volumes are ext3. but when I do a tune2fs -l /dev/sde it tells me
tune2fs 1.39 (29-May-2006)
tune2fs: Permission denied while trying to open /dev/sde
Couldn't find valid filesystem superblock.
I don't have root access on the server, but is that why it's complaining, or is my syntax incorrect?
I ran this command on a new centos 5.6 64 bit install today: rpm -Uhv http://apt.sw.be/redhat/el5/en/x86_64/rpmforge/RPMS//rpmforge-release-0.3.6-1.el5.rf.x86_64.rpm Sadly I failed to read a warning about setting priorities as a prerequisite to avoid rpmforge overwriting base Centos packages.
The install is a standard Cpanel web/email server and seems ok at the moment. My concern is I intend to clone this VS about ten times. Should I be concerned and if so, is there any way I can safely undo the rpmforge install? Eg can I use "rpm -e rpmforge-release-0.5.2-2.el5.rf" without vile consequences?
I saw a wierd code in perl code recently it went kind of like this: die 'error' if (xxx); Now is that valid perl?
View 5 Replies View RelatedI am trying to install CentOS-DS on version 5.4 x86_64. I cannot get to the Extras repo due to lack of wired Internet access. I have wireless (except to server) and I have big UFD drives.
View 1 Replies View RelatedJust checking to be sure. 5.3>5.4 update went without a hitch:) But a message ran about (/etc/yum.repo.d) CentOS-Base.repo.rpmnew. Comparing CentOS-Base.repo with the new one show the 1st has the correct priorities and .rpmnew does not have the correct priorities. Should I remove the *.rpmnew repo after making sure it otherwise is the same as the original CentOS-Base.repo?
View 1 Replies View RelatedI have KDE 4.5.1 installed there are a few bugs I know they fixed in 4.5.2 but cannot find a repo with 4.5.2 or 4.5.3? Is anyone running either 4.5.2/3 and if so where did you download from?
View 5 Replies View RelatedIs there any repo where we can find KDE 4.4.3 packages?We have used to get the latest stable KDE at the day of release (that means today for KDE 4.4.3).
View 8 Replies View Related