CentOS 5 :: Cannot Get Proper Monitor Resolution To Display?
Jan 7, 2010
I am having video issue with ubuntu 9.10 and centos 5.4 cannot get resolution higher than 800x600 on Viewsonic vg930m monitor...The first time I installed ubuntu 9.10 worked great, since then no better than 800x600 on both linux distros. Any ideas it is very annoying, like using web browser on a small tablet pc....This monitor works great with opensolaris, though.
Using both distros in virtualbox right now but even if not virtualized install on hard drive I cannot get higher than 800x600...Driving me nuts.
View 14 Replies
ADVERTISEMENT
Oct 1, 2010
It seems that whenever I boot my laptop (hp probook 6450b) without a monitor attached, then boot with a monitor later attached, the configuration gets all messed up.
Currently, if I boot with the monitor attached, right after the blue loading screen (at the login prompt) i get two black monitors and a mouse, with no login screen. Unplugging the monitor shows the login screen on the laptop.
If i boot without the monitor attached, log in, then plug it in, i see the following from xrandr:
Code:
Screen 0: minimum 320 x 200, current 2390 x 768, maximum 8192 x 8192
LVDS1 connected 1366x768+0+0 (normal left inverted right x axis y axis) 310mm x 174mm
1366x768 59.6*+
1024x768 60.0
[Code]....
However, now when I reboot, all settings are lost, and if the monitor is attached, i get the black screen with a mouse at login.
I did notice that when I shutdown, it hangs on "Running guests on default URI", and i get a stack trace. It will keep dumping stack traces, and i have to hold down the power button to force it off.
View 2 Replies
View Related
Feb 2, 2010
I installed 9.10 on a computer I'm working on, and right away the graphics went out. It won't display the proper resolution without shoving the display significantly to the left.
After MUCH Googling, I found that this can be fixed by a driver called i915. After much MORE Googling, I found [URL], which as you can imagine filled me with relief.
And THEN I try to follow the instructions and discover to my pure horror that GRUB has been gutted and made unusable in 9.10. GRUB2 just simply does not seem to have an option to insert the i915 driver into my boot command.
should I just forget this unstable release and burn a 9.04 disk instead?
View 5 Replies
View Related
Aug 18, 2015
my TV resolution is 1366x786, I've set it with xrandr [URL] , but any mode I pick there are two black strips on the sides of my TV display. I'm using debian jessie 8.1 and xfce.
View 4 Replies
View Related
Dec 27, 2010
This has been happening with the majority of screens I try to plug into, but the proprietary nvidia driver never detects the correct resolutions -__- the open-source driver works perfectly with a little xrandr magic, but I'd like to have some 3D acceleration going on. I'm using the desktop version of Nvidia ION and ubuntu 10.10, with the current nvidia driver (from the repositories). The native resolution is 1440x900 @60 Hz. Any thoughts on this? Again, the nouveau driver is great but I'd like to have VDPAU and the like working. code...
View 9 Replies
View Related
Jul 17, 2011
I just installed Natty (11.04) on an old computer for my disabled brother with:
* Video Card:
00:02.0 VGA compatible controller: Intel Corporation 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device (rev 01)
* Monitor:
VGA Mitsubishi Diamond Pro 750SB (old CRT monitor)
The problem is that when I select System -> Preferences -> Monitors, the monitor is shown as unknown and it only allows me to set 1280x1024 (shows 0Hz as display refresh rate) which is way too high for my brother. I was wondering if there's a way to select the proper monitor from a list so all display resolutions are shown and I can select a lower one for him.
View 8 Replies
View Related
Aug 12, 2011
I recently installed Debian. I have a monitor plug in to my laptop and i cant get my monitor to display its native resolution.
View 4 Replies
View Related
Mar 30, 2011
I'm a new Fedora/Linux user and I've just setup my first laptop to use Fedora 14. However, I've come across an issue and I've done a lot of searching on various forums etc and basically I'm going around in circles. I've had my PC hang already after I tried to create a xorg.conf file. I have since removed the changes I made.
I have a a SIS 771/671 PCIE VIA Display Adapter (rev 10). I got this info via the lspci command. The problem I have is that it's not letting me select a resolution above 1024 * 768. I know it has higher resolutions as when it was a Windows XP and Vista PC I had higher resolutions. There has to be an easier way to set a screen resolution that manually editing cryptic files and knowing refresh rates etc.
View 12 Replies
View Related
Mar 8, 2010
CHECK OUT THIS THREAD INSTEAD: http://ubuntuforums.org/showthread.p...93#post8937093 I got a problem with my xorg.conf file. I'm just not able to add display resolutions. I'm running Ubuntu 9.10 x86 with Xfce4 desktop enivorment. I got an old Nvidia 6600 GT. I'm on a 21" IBM CRT, and i know that it's good for 2048x1536 @ 75hz.
I know that it can handle 30-130 khz Horizontal and 40-170 hz Vertical.
I also know that i would like to be able to use 1600x1200 @ 85hz.
Right now I'm just not able to go past 1024x768 @ 50hz. I've installed the restricted nvidia driver from the popup restricted driver menu, also tried to downgrade to an earlier driver, did'nt work, then i upgraded again to the newest driver that was easily available through Envyng-gtk. Still no more resolution choiches.
sudo dpkg-reconfigure xserver-xorg just don't work. Nothing happens when i write it in the terminal.
Now i'm starting to get frustrated
[Code]...
View 3 Replies
View Related
Nov 19, 2009
I have never used Linux always windows so heres the problem the display only has 2 settings 640x480 and a smaller one and it say unknown monitor. I installed the drivers in hardware driver in systems I'm running Ubuntu v 9.10 if that matters and the video card is a Nvida mx440.
View 1 Replies
View Related
Feb 6, 2011
I'm newbie linux user and I want to ask a question about my laptop display is too big i think its because of my screen resolution, how can I change my monitor resolution?
View 1 Replies
View Related
Dec 5, 2010
I recently purchased the HP w2338h LCD monitor; I previously used HP w1907, which worked perfectly. My graphics card is NVIDIA Quadro NVS 290.
01:00.0 "VGA compatible controller" "nVidia Corporation" "G86 [Quadro NVS 290]" -ra1 "nVidia Corporation" "Unknown device 0492"
01:00.0 0300: 10de:042f (rev a1)
View 2 Replies
View Related
May 27, 2011
I have done a scratch install of Ubuntu 11.04 (Natty) successfully today. I am facing problem while adjusting my monitor resolution.
My motherboard is pretty old, Kobian 845GLNDSMx. When I tried to adjust the resolution from Preferences -> Monitors, the resolution is shown as 800x600 (4:3), Refresh Rate - 0Hz and Rotaion as normal. "Monitor Unknown" is highlighted on the window. Moreover, "Detect Monitors" doesn't work.
View 9 Replies
View Related
Jun 18, 2011
I am new to Ubuntu. I installed Ubuntu 8.04 and it detected my Acer monitor AL1716 correctly and it works fine. However when I installed Ubuntu 11.04 it shows the monitor as " Unknown Monitor" and the maximum resolution is 1024x768 and I cannot set the native resolution which is much higher. My motherboard has Intel 845G chipset and built in graphics. I tried Ubuntu Software Center, but couldnot solve the problem.
View 4 Replies
View Related
Feb 20, 2011
My monitor is an old, low-res (800x600 resolution) flatscreen, and the loader keeps trying to set it for 1024x768.the initial setup and package selection screens ran fine. it was only after rebooting to the "Welcome" screen that the problems started. I found the "resolution= (800x600 for me) under "additional boot options", but I don't know how to use it.
View 3 Replies
View Related
Apr 30, 2010
My machine is dated, that's for sure, but it's never given me problems. Ubuntu has worked flawless until the 10.04 update. Now I'm not getting my proper screen resolution of 1024.768, and Ubuntu won't recognise my screen. Also, when I try to load up my nvidia drivers on the Hardware Drivers app, and reboot the computer, when GDM loads I get an error that the nvidia module fails to load, and there is no such driver.
View 6 Replies
View Related
May 2, 2010
I have installed Lucid on a PC with integrated graphics (GeForce 8100 on a Biostar GF8100 M2+ TE). On a fresh install the resolution is 1024x768, but that's no surprise as the Nvidea drivers are not installed. Immediately I get a notification of HW drivers available. I install the latest (recommended) ones (195.36.15). Reboot, and I can see other resolutions available:
1152x864
1360x768
I'm using a 19" Dell LCD (4:3 ratio) which supports up to 1280x1024. I can actually set the 1360x768 but, obviously, the screen looks ... squashed in the X axis. I noticed that the type of display is not identified (Nvidia panel says "CRT-0"), so I tried to manually add the 1280x1024 resolution. Below you can find the xorg.conf and the Xorg.0.log. It seems to me that the mode 1280x1024 is considered not valid for some reasons. The string for Modeline in the xorg.conf was determined using "cvt".
Here's the xorg.conf (after a few iterations, it became a bit busy ...):
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder5 Fri Mar 12 02:12:40 PST 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection .....
View 9 Replies
View Related
Dec 15, 2014
I intend to switch to Debian form PCLinuxOS. I am not an experienced Linux user. But I intend to switch all my machines to Linux. I have used Antix as well on an older machine. I am a bit familiar with the basic Linux CLI commands.
I intend to switch to Debian as I think the support (Forums and probably mailinglist) are more active then PCLoS and Antix. Sadly enough though the live cd gives a problem which no distro gave on the same machine. And I really do not know what to do about it.
When starting the first line that prints is:
Umount: can't mount /live overlay: Device or resource busy
View 14 Replies
View Related
Jun 29, 2011
I need my xorg in 9.10 to be in 5:4 ratio for it to display properly. Does any one know how I can do this. Can not update to 10.04 because I get frozen screen with activity indicator stuck in upper left corner. Any help would be greatly appreciated.
Here is a copy of my config:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder63) Fri Aug 14 17:54:58 PDT 2009
Section "Monitor"
Identifier "Monitor0"
[code]...
View 1 Replies
View Related
Jan 2, 2010
My monitor is the hp pavilion f1703. The 9.10 only offers 2 resolutions 800 x 600 (4:3) and 640 x 480 (4:3)The native screen resolution is 1280 x 1024 @ 60Hz which is obviously not offered. I did my homework and followed this guide found here http://www.ubuntugeek.com/how-to-adj...on-ubuntu.htmlall i got was 'xrandr:cannot find mode 1280x1024' when i try to set the resolution manuallyThe weird thing is ubuntu 8.10 detects my monitor native screen resolution just fine.
View 9 Replies
View Related
Apr 19, 2011
I have a LMDE (Mint Linux Edition based on testing, now Wheezy) i386 that I just did a dist-upgrade on and now it isn't properly detecting my monitor resolution. I have two 1680x1050 monitors, one attached to the DVI and another to a VGA video switch. When I rebooted to the new 2.6.38-2-686 kernel both monitors were giving me 1024x768. I futzed around for a while and could then get the the DVI monitor to correctly identify the proper resolution, but the VGA monitor resolutely refused to see more than 1024x768.
I was able to get the proper resolution by entering these commands:
[Code]...
Should I file a bug report, and if so, with whom? I have to say, the Debian bug report process is not too newbie (or even not-so-newbie) friendly, but I'd like to help if it doesn't require me to hand-configure a MUA.
Also, I suppose I shouldn't mention it in a single post, but my mouse is behaving rather unpredictably now (click speed, selecting), and trying to reboot dismounts the file system and then starts up again giving me my display manager (in my case KDM), without restarting the system (both from "sudo reboot" and trying to restart with KDM or the Gnome widget). If I really want to restart the system I have to halt it first and hit the power button.
View 4 Replies
View Related
Dec 7, 2009
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies
View Related
Oct 16, 2009
I am facing problem with the fresh installation of Fedora 11. (I have moved from Fedora 9). When I try to view videos on ..... or use the Cheese Webcam Booth, I get blurred lines on the screen and I am unable to see any video or pic.
Also I noticed that the when i go to System > Preferences>Display, it shows me UNKOWN MONIOR.
However, if I got to System>Administration>Display and enter the su password, it shows me correct monitor and the graphics driver.
I am not sure if my original is related to the Unknown Monitor.
I also tried to install Nvidia driver but it crashed the xserver and I had remove the driver.
My Monitor is LG 700E and Graphics card is from intel. as I am not able watch any video.
View 5 Replies
View Related
Apr 3, 2010
I installed Karmic on an older PC I had laying around, and the only trouble I am having is with screen resolution. It uses an old ATI chipset (onboard) for video, and it doesn't seem to do EDID correctly, so I can't display anything higher than 800x600. I have tried creating an xorg.conf, but it's still not working. How can I tell Xorg to ignore the fact it can't detect a widescreen monitor and display something larger than 800x600? I noticed the log says the sync's are out of range, but I am not sure how to fix it.
Here is my current xorg.conf.
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
[Code]....
View 1 Replies
View Related
Nov 5, 2010
I have a 22'' monitor. And I would like to set resolution to 1280*800. This is the resolution set in Windows in my computer in another disk partition. So I dont understand why I can't do the same in Fedora 13. The default resolution is 1680*1050, but everything looks too small. Other options I can choose are uselesnes because it distort everything.
View 2 Replies
View Related
Dec 5, 2010
I have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:
1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use
2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case
3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs
4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel
View 2 Replies
View Related
Jun 23, 2010
How to change the resolution of my tv to be the same as the monitors. I mean cloning ..
View 9 Replies
View Related
Aug 26, 2010
just installed ubuntu10.04 has set monitor resolution to 800x600 i need 1920x1080 i have been at this for two days now and getting absolutely no where , i could set this on windows in 5 minutes , why does it need to be so hard on ubuntu, i really prefer ubuntu to windows but problems like this really can drive one to despair. i have tried so many different web sites and follow instructions but keep getting command not found which i dont understand why. here is an example of something i tried in terminal xrandr --output VGA --mode 1920�1080 --rate 50 i get warning: output VGA not found; ignoring.many other things i have tried come up with command not found .
View 4 Replies
View Related
Oct 15, 2010
I have a laptop with an "ATI Technologies Inc Mobility Radeon HD 3400 Series" video device. I have trouble configuring the second VGA monitor attached to the laptop to 1024x768 resolution. It is always stuck on 2560x800. My xorg.conf file is as follows:
Code:
Section "ServerLayout"
Identifier "amdcccle Layout"
Screen 0 "amdcccle-Screen[1]-0" 0 0
Option "DefaultServerLayout" "dualscreen"
EndSection
[Code]...
View 2 Replies
View Related
Jul 25, 2011
Just installed 11.04 on a box that it is on a kvm switch. As long as the switch is connecting the monitor to the booting Ubuntu box, the resolution of the monitor is detected OK. However, if for some reason I am working on a different box and the KVM switch is routing K V and M inputs to the other box, then Ubuntu defaults to what seems a botched VGA setting (i.e. it chops off top and left sections of the display).While in this "VGA" mode if I log out and log in, it re-detects the resolution ok.Is there any way to force Ubuntu to use a specific resolution no matter what? In this way, if I am working on a different box while waiting for Ubuntu to load, when I switch the resolution will be OK.I tried the only thing I can think of and this is to set the "good" resolution as "default" for "all" monitors, but it has no effect.
View 2 Replies
View Related
