My canon mf 4018 could not print in Centos 5.5 What I did before: I chose Administration/printing and there I tried to add new printer. Unfortunately, I could not find my model of the printer in that list. I used also official canon site to find a driver for Centos 5.5.
View 2 RepliesMy wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedI cannot print with my Canon MX860. I have downloaded the proper drivers from the Canon Europe website and forced the arch to x64 as described on many sites. When I try to print a test page I get the error that "Idle - /usr/lib/cups/filter/pstocanonij failed". I have checked in lib64 and pstocanonij was there as well. If I change the URI from USB to CNIJUSB then I get the error that "cnijusb has failed". It may be possible to get this working as in another forum someone claims to be successful. I am able to use the scanner with the sane-backends package, so that is not a problem.
View 6 Replies View RelatedOS: Kubuntu 9.10
Printer: Canon i550
I have tried selecting many of the drivers located on localhost:631 and none of them work. i550 is not in the list of drivers. When I select i560 it will print if it is only one line after that it seems to get confused and doesn't print. Sites that I have looked at [URL]...
it is shown as my default printer, and even spits out a sheet when I try to print something. The 'Test Page' actually includes some ink and lines but does not look like the real thing.
View 5 Replies View RelatedAfter I install my print Canon LBP3010 following this instruction: Fail to print with Canon LBP3010
[Code]...
I have the printer Canon i-SENSYS LBP6020. I followed the instructions from the site URL....There are no errors, but when I try to print, nothing comes out of the printer.My system is: Debian GNU/Linux 8 (jessie)Here is some debugging information:
Error log while printing from a CANON LBP6020: URL....
Troubleshooting information while printing from CANON LBP6020: URL....
I am trying to install a Canon MX922 printer on LMDE.
I ran ~/Downloads/cnijfilter-mx920series-3.90-1-deb (install.sh wont find wired lan printer with IP 192.168.0.14)
Installed these:
cnijfilter-common - IJ Printer Driver for Linux.
cnijfilter-mx920series - IJ Printer Driver for Linux (these repo drivers don't even show up when I go to add printer)
I tried system / admin / printing / add printer (and it FOUND the printer! But it won't print.)
Recently brought new printer Canon LBP 2900B.
I have downloaded drivers form canon website ([URL])
When I switch on the printer, it will be detected.
But when I click print button in any of document, it won't start printing. In job queue status shows "Processing". I have waited for 15 minuets printing didn't started.
I just bought a new printer yesterday. It is a Canon Pixma iP2600 series. I connected everything properly and my computer found the drivers and told me the printer was ready for use. However, when I tried to print out a test page the computer said it was printing, the printer was flashing as it should, but nothing was printing out. Is there some switch I need to turn on or off? Is there something that I need to type in or delete somewhere? The old printer was a HP deskjet and it did work even if it was a little slow being that it is over 8 years old.
View 6 Replies View RelatedI recently purchased the canon pixma mg5220 and am currently figuring out how to print to it from my computer.
First of all, I dont know how to connect to it (its a wireless printer btw and is currently connected to my wireless router). I went to the "add new printer" part of the printer utility and selected "Find Network Printer." I dont know what to type in for "host" however. Right now i have a temporary fix of sharing the printer on my laptop (which runs windows) and printing through that.
Second of all, drivers. I found http://ubuntuforums.org/showthread.php?t=1588333 and downloaded the drivers (to my downloads folder) from the link provided, but I can't figure out how to install it. The post says to run the install.sh but it seems to be just a text file, and when i right click it, "properties" is not an option, so i cant mark it as executable. How would can i run this file to install the drivers?
I would like to know if it is possible to configure my laptop so that it can print wirelessly on my MP800r canon printer, and if so then how to configure them to make this operation possible. I'm using Ubuntu.
View 1 Replies View RelatedI can't get my ubuntu 11.04 to print on canon pixma ip2772, it says that I got canon ip2700 series installed, and show that I am printing a test page, but nothing happens on the printer.
View 4 Replies View RelatedRunning Ubuntu 10.10, when trying to print to canon 1800 print file is created, spooled to printer but does not print. Job appears in print Q and ends as finished job, next job number increases correctly. Printer light flashes to indicate data in,, but nothing out on paper !! (printer works fine on "the Other" OS!
View 4 Replies View RelatedF13 showing that Canon s100 printer is founded, installed drivers and everything seems to be OK. But when i try to print text, testpage of what ever, nothing happened. Installed system-config-printer 1.2.4-1.f13, same udev and libs. Cups 1:1.4.4.5.f13, libraries, php modules Here is the Error msg:
[code]...
I have Canon MF4150 printer. I have downloaded Linux Printer Driver (UFR II) Ver.2.10E from canon asia site. Adding the printer and printing work fine, except that after one printing, the printer stops working. There is no error message./var/log/cups/access_log shows
Code:
localhost - - [23/Oct/2010:19:53:55 -0500] "POST /printers/Canon-MF4100-Series HTTP/1.1" 200 45240 Print-Job successful-ok
[code]...
I am looking for a good new ALL IN ONE printer that will be compatible with Ubuntu right out of the box (scanner and everything).
I am also looking for a portable bluetooth printer that will be compatible. I currently have a Canon pixma ip90v bluetooth printer but I cant get it to print AT ALL and Ive tryed everything.
I am currently running 3 computers with Ubuntu 10.10 and one with 11.04 Alpha 3.
Trying to make a Canon Pixma 3-in-1 MP250 to work with my Slackware. I've took the drivers from the canon website (they have .deb, .rpm and sources there) and compile. Basically I followed the instructions from INSTALL files in each subdirectory (backend,cngpij, etc).
Then I upgraded also CUPS to 1.4.3.
Installing the printer in CUPS, I end up with:
Code:
Description:Canon MP250 series
Location:
Driver:Canon MP250 series Ver.3.20 (color)
Connection:cnijusb:/dev/usb/lp0
Defaults:job-sheets=none, none media=iso_a4_210x297mm
It seems ok. But when I send a test page (or any other kind) to printer, it shows some activity on the led display, cups reports the job as completed but nothing happens!
As an extra, I tried to convert .deb packages to .tgz and install from them. The same result, except now the scangear utility is working (so scanning is ok).
How can I find what's missing from here? Maybe it's a bug with cups/drivers or something is missing from configuration?
p.s. On other machine I have an Xubuntu (Karmic Koala). Installed there from .deb packages and the printer works as expected.
How do I get the configuration page for a Canon PIXMA IP1600 to print?
View 1 Replies View RelatedI searched for solutions for hours and yet can't manage to get my printer to work. I downloaded (as it was suggested elsewhere) the "cnijfilter-common" and the "cnijfilter-ip2600" that I found on Canon website. However when I want to install the first package, it says : "Error : Failed to satisfy all dependencies (broken cache)". (I use Ubuntu 9.10) Edit : I found that the missing dependency was "libcupsys2" but I can't find it on Synaptic...
View 5 Replies View RelatedAs I try to install the driver for canon mp 160 driver, I realize that canon dun't open their drivers to open source. code...
I should follow something similar to http://forums.fedoraforum.org/archive/index.php/t-144423.html, right? i.e. download the rpms and rpm -Uvh in the same directory, right?
How to printing with double-sided print
In case of usling each driver...
I want to select 3 option double-sided,layout 2up,color(grayscale)
Configuring at cups web page [url]
"Inkjet Print Filter Ver.2.70" and "3.0" is as same as "Ver 2.60" In case of using each canon drivers,can't select color option window. And there is no color option on cups page,and system-config-printer. I thought any canon official driver may be no able to apply double-sided option.
Centos Version 5.3 updated
Thunderbird 2.0.0.21 (20090327)
Every time I try to print an email it goes through the process of activating the print. in the print window I click "print" then I get a message "You cannot print While in print preview"
Other applications print without a problem. I can also print attachments to emails.
This has been getting worse over a period and now I can not print an email at all. Rebooted, started and stopped the Thunderbird.
Cent OS 5.5
How do I configure CUPS to print to PDF?
I am trying to print to an HP LaserJet 6L via a USB->parallel printercable, from a CentOS 5.3 machine using CUPS 1.3.7, but I cannot get itto work.When I plug the cable into the USB port on the CentOS computer, I seethat the following devices are created:
crw------- 1 root root 442, 6145 Aug 13 08:28 /dev/usbdev4.2_ep00
crw------- 1 root root 442, 6145 Aug 13 08:28 /dev/usbdev4.2_ep02
crw------- 1 root root 442, 6145 Aug 13 08:28 /dev/usbdev4.2_ep81
[code]....
neeed help setting up a network printer on centos 5.2
View 4 Replies View RelatedI just installed CentOS 5.3 on Compaq desktop PC with HP laser jet 2100 attached to parallel port. The PC is connected to LAN with 2 other PCs running Fedora. I configured the HP printer as a shared CUPS printer and I was able to detect the printer from the other PCs running Fedora but I can't print test page from the other PCs.
P.S. I opened up port 513 and 631 for both UDP and TCP on print server PC and cups-lpd service is running on it.
I work at The University of Alabama as a sysadmin on various HPC resources and also provide support for faculty using Unix systems. I've run into one problem that is affecting two different desktop systems running CentOS 5.3.oth of these systems have the latest updates. These machines have standard network-attached printers. One is an HP LaserJet 3250 and the other is a model that is pretty close to that one.Previously these users were able to print from graphical applications such as Firefox, but now when the print dialog is opened on ANY graphical application, it causes a hard freeze on that particular app.Printing from the commandline via `lpr` gives no issues and test pages from the Printer Admin interface also succeed.This problem has me stumped, so I'm looking for any insight as to what could have changed. I do not know what changed between the time when the printers worked graphically and when they stopped, but the users assure that they have changed no settings. The only thing I can suspect is a rogue update since this is affecting separate users on separate machines with separate printers.
View 4 Replies View RelatedMy setup is like this: i have a small office network and i bought yesterday a new multifunctional printer Samsung SCX-4521F. It is shared with samba and connected to the server with USB. In the network everyhing works well, users can log on to the domain, print from windows to the new shared Samsung printer and i even managed to enable network scannin. But when i try to print from MS DOS i wont get a single page. We have an accounting program in dos. All the other computers are XP Pro SP3. My server is running for 2 weeks the newest CentOS with all updates. I'v maped the network printer in windows witht the command "net use LPT1 \ServerSCX-4521F. I get a message that maping was completed succesfully. If i start a print job nothing happens. "Printing" or "warming up" flashes several times on the printer and thats it.
CUPS error log:
I [02/Apr/2009:00:03:45 +0300] Adding start banner page "none" to job 125.
I [02/Apr/2009:00:03:45 +0300] Adding end banner page "none" to job 125.
[code]....
I am demo'ing Kubuntu 9.04 workstation to a customer. He has a CentOS 5.3 server (my doing). On it is our CUPS Network file server. Everyone (65 of them) print to our network printer through it using LPR/LPD (and sometimes Samba).
Problem: when Kubuntu's Print Configuration Tool went looking for printers, it found every network printer's IP address, but missed my CUPS printer server. What did I do wrong on one or both ends (I have control over both).