Networking :: 2 Nics And Bonding - "select" The Right Path In Order To Reach The Radio Streaming
Aug 5, 2010
On my computer i have 1 network card and 1 USB modem for Mobile Internet. I can access internet using both devices, but when i am using the network card i am unable to listen to radio stations because the radio streaming is not allowed at the work place. So, i am triyng to find a solution and the solution seems to be to use the bonding module on linux. But i have a few question:
1) i don't know if it is possible to use this module for 2 such different devices
2) i don't know if, even enabling bonding, i will be able to "select" the right path in order to reach the radio streaming , or if the right path is selected automatically. When i connect to the radio station using the network card, it opens the connection, but it closes it imediately and i am not sure that the kernel is clever enough to use the other connection in this case.
I have squid running on my home gateway, but when I try to listen to streaming radio, it doesn't work.
Using mplayer with a proxy shows this:
Code: /home/fukawi2 $ mplayer http://media.on.net/radio/143.m3u MPlayer SVN-r32492-4.5.1 (C) 2000-2010 MPlayer Team 159 audio & 349 video codecs mplayer: could not connect to socket
I have an Asus R1F laptop with a build in wireless card. I also have 2 USB dongles that we used to use old desktop machines. All of the cards work fine in Ubuntu. I'm running Ubuntu 10.10, 2.6.35-22-generic-pae.
The problem is that I have really bad signal on my side of the house and the connection is dropped quite often. I've tried just connecting on the devices at the same time, they all connect fine but nothing actually works. I read about bonding interface cards on this blog and that would solve all my problems - if a usb dongle could act as a backup for when the normal connection is dropped and while it is reconnecting.
I tried what was written and also did some Googling, but every way that I try seems to work fine until 2 wireless devices are bonded. When that happens they both disconnect and reconnect like crazy. This happens both with and without network manager running.
Build in card[wlan0]: Intel PRO/Wireless 3945ABG USB[wlan1]: Cisco LinkSys Compact Wireless-G USB Adapter USB[wlan2]: Realtek RTL 818713 WLAN Adapter I load the module: Code: modprobe bonding mode=1 miimon=100 downdelay=200 updelay=200
I am currently investigating channel bonding for rhel5.5.Is there any way I can create one bond from nics on two different linux machines.They will be a cluster without any clustering software like beowulf or LVS.There will be a cluster interconnect through which they can communicate.Should I tweak the bonding module??
I have an account to log into Coasttocoastam Site and listen to the streaming audio. On windows it plays with either Windows Media Player OR Real Player. I've always just used Windows media player. Now that I'm installed Ubuntu 10.04 when I go the site. Of course I click it to copy what it's doing and XINE is displaying and I see it's buffering and then starts to play.
i'm getting no audio from online streaming like radio stations etc. videos such as videos and the like seem to be fine though. i presume i'm missing some package which is in synaptic.
tried to do a search for this but it's a bit of a tricky thing to search for. Basically what I'm after is a solution for my work so I can stream a online radio station down to 1 server, and then have the clients stream the audio from that. Anyone know if that's possible?
so: Online Radio >> Server >> Clients
Any linux or winblows solution would be fine, I'm just trying to look for a solution that would cut down on the internet bandwidth usage, but still allow uses to listen to online radio.
I'd like to have a port open for some streaming radio stations. However, I don't know if they are UDP or TCP or what "direction" to have them set up (inbound or outbound). I also don't know if they should be set up for "host" or "dynamic". The stations I'm interested in are the 181.fm channels mostly (shoutcast stations). We have a Westell A90 type modem/router from Verizon.
I am unable to play any radio streams such as those found at www.jazz24.org and [URL]
When I click on them, whether trying to use their "player" or (in case of jazz24) clicking on "mp3 stream" ... the result is simply crashing the browser, whether firefox or chrome. If I click the mp3 stream, banshee opens with an hourglass-type icon but doesn't do anything.
My local music files play fine on Banshee and I CAN listen to streaming baseball on mlb.com (which is a Flash-based player).
I have Lucid 64 bit. For some reason, I feel like these radio stations used to work, though I can't pinpoint when they stopped working. Can it be that the entire world of internet radio is closed to me on Linux? For some reason i doubt it, there must be something I'm doing wrong here?
I have Ubuntu on both my machines but my older machine is a Duron with 128 mb of ram. Because of that, I have Xubuntu 6.06 on it. It runs very well. So well, I wondered if I could use it to stream internet radio or even videos. Problem is, I can't find flash for it.
I'm getting a new HDD today. I have SATA 500GB, and I'm getting SATA II 500gb. This is what I wanted to ask. On my first HDD, I have Windows XP and ubuntu and on the new HDD, I will install Windows 7. What I wanted to ask, are such things like jumpers on my HDD (master/slave etc.) used to select boot order? Or will I have to go into BOOT settings and choose Win7 Hdd first in the boot order etc.?
I'm writing a PHP script, and I need a top 10 result from a mysql query.I've tryed like this:select IP,sum(download) from traf group by IP order by ASC limit 0,10and my sql returnsmysql> select IP,sum(download) from traf group by IP order by ASC limit 0, 10;ERROR 1064 (42000): You have an error in your SQL syntax; check the manual that corresponds to your MySQL server version for the right syntax to use near 'ASC limit 0, 10' at line 1As I red through Google this is not quite supported by mysql, so is there another way to do this?
I am using a dual boot with windows vista, I would rather use ubuntu but my wife wants windows. How do I change my boot order to boot into windows instead of ubuntu? My ubuntu is an upgraded version from 8.? then 9.04 then 9.10
I was able to boot from my USB to begin Debian installation screen which after loading kernel gave ncurses based screen asking me to give the location of ISO I formatted the USB to two partitions
/dev/sdb1 (bootable) 1GB and /dev/sdb2 6GB
after rebooting the debian installation process does begin. But I do not want to use the 20MB business card ISO Instead I have the 4.2 GB ISO on other partition on USB how can I make it take read that image so that installation begins from the 4.2GB ISO on other partition. Do I need to edit in syslinux.cfg some thing or how can I bring the grub command prompt so that I give it the path to kernel and initrd or syslinux can not take ISO from other partition.
I successfully installed darwin streaming server .. I stream Audio through internet well but videos I can stream locally in my network only .. when I am connected to internet outside my network .. it doesn't stream I think their must be ports opened for that .. or any 1 have any ideas .. the audio is streamed on port 8000 .. video is streamed on port 7070 but locally only .. I opened those 2 ports in my router only the audio is working .. also I opened ports 554,7170 disabled the firewall of the router .. is it a problem of ports or something else .
I've run across a few threads in the archived forums regarding nic bonding. I could be wrong but I imagine most of the people that are looking at bonding are probably really wanting what they would get out of creating a LAG between their Ubuntu Server and a managed switch capable of LACP trunks. If you have two NICS on your ubuntu server and want 2gps throughput & failover check out the page on creating a LAG. Obviously this requires your switch to be compatible though. [URL]...
I installed Fedora 10 and used dynamic IP first. Then I found out that bonding works with static ip only so I switched to static IP. But then, since I have 3 NIC cards, I configured bonding. I need help in these points:
1- steps to follow so that I switch from dynamic to static IP 2- steps to follow so that I configure bonding
I am seeing an issue on a few servers where it doesn't appear all NICs in the 802.3ad lag are all operating at the same level. A few of the servers have two bonds each with two NICs in each bond.I have two NFS servers that each has 1 bond with 3 NICs.All are RHEL5 x64 2.6.18.I think the reason why I see one interface dominating RX and another dominating TX is due to the xmit_hash_policy but there are three hosts that use this particular server for network traffic.That's 3 different physical mac addresses.The layer2 algorithm should be fine in that situation I would think.Would I just be better off with balance-rr?
is possible to use linux (especially slackware) to bond 2 (ethernet modems) adsl connections. For example if i have 2 connection of 24mbs download and 512 upload i will create achieve 48 mgps dowload and 1 mgps upload . something like that
adsl1 modem <------ eth1--- (slackbox router) --- eth0---> my server adsl2 modem <------ eth2----
I am confused as to what is going on with a particular box that I am working with.As you can see in the attached ifconfig print out, one eth port is basically only used as a output while the other is only really used as an input.I connect to the box via 10.20.40.104 for ssh,ftp,http,etc.I just want to know the name of what is happening (is it bonding,bridging?) and maybe some information about where it is configured.I looked in modprobe.conf
I am wondering if any in the Ubuntu community owns a Carmen Car Radio player by Livio Radio. The program to save internet radio to the device is written in Java, however I am not able to run it either using WINE or using Open JDK.
The Carmen Player does work well with Banshee, it is the internet radio that is not working.
I have a new install of Karmic on my system with a flyvideo 3000 tv card installed. My problem is that it doesn't find any radio channels and the input channel is completely wrong. I don't have any sound on gnomeradio and can't find the config files to change the input channel. The only input option available to me is dig1 - can anyone point me in the right direction?
I have already read the Howto for this tv card and changed the device to radio0 in the setup. I have setup tvtime perfectly with sound channel as well as with a 5.1 surround configuration. I am missing my favourite radio channel. and I want to get rid of my windows installations once and for all! Update: I did a system update and some things have changed: the radio tower graphic on gnomeradio is now green (I assume it is getting a signal) but no sound yet.
I have a question about bonded NICs and the switches they are connected to.
I have a server which needs to send a lot of data to another server quickly. Both have multiple GbE NICs. I understand what is required at the server end (I think) in that a pseudo-interface is created such as bond0 with the IP applied to that interface rather than eth0 and eth1.
My question relates to the connection between the servers, i.e. the switch. Is a specific type of switch required for this to work, as an IP will have 2 (or more) MAC addresses associated with it, or how does the switch decide to which port to route the traffic for the bond0 IP?
Also, will this only work when multiple connections are being made? What I mean is, will each individual TCP connection only use either the physical eth0 OR the physical eth1 interface, or can a single connection make use of the aggregated bandwidth, sending one packet to one physical interface and another to the other physical interface, using the bond0 IP as the destination?
What I am trying to work out is if I had a storage server connected to an application server and exporting storage using NFS or GlusterFS, would an aggregated link improve throughput?
I have 4 DSL modems connected with 4 different ISP's my scenario is
a) My FC-2 machine with LAN IP=192.168.10.1 and Bond0 IP=192.168.1.1 b) Modem-A LAN IP= 192.168.1.2 , ext IP=xxx.xxx.xxx.xxx c) Modem-B LAN IP=192.168.1.3, ext IP=xxx.xxx.xxx.xxx d) Modem-C LAN IP=192.168.1.4, ext IP=xxx.xxx.xxx.xxx e) Modem-D LAN IP=192.168.1.5, ext IP=xxx.xxx.xxx.xxx
Modem-A, B, C, and D LAN connected with my FC-2 machine, and all 4 interfaces of my machine are in Bond0, Now please help me what default Gateway I should set in my FC-2 machine?>??? or I have to set 4 gateways in my machine?and will this configuration works?
I'm trying to set-up a back-up (mode 1) bonding nic. I can't ping the LAN, pinging bond0 locally however works. Here is my config:
/etc/modprobe.conf Code: alias eth0 e1000e alias eth1 e1000e alias eth2 e1000e alias eth3 e1000e alias scsi_hostadapter ahci alias scsi_hostadapter1 usb-storage alias bond0 bonding [Code].....
