reason my wireless is constantly failing. the only solution is a reboot but it will start to fail again. I use hp mini 210 ubuntu netbook remix.here is a log file
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (
[code]...
I recently installed Ubuntu 10.04.1 LTS and have it set to dual-boot with windows 7 on my gateway tablet PC. Since installing, sometimes when I suspend or reboot, my wireless does not work. To be more clear - it is working fine, then I either suspend/reboot, then I come back and no wireless networks show up at all. I can still connect with ethernet cable though. I can solve it by rebooting multiple times (usually around 1-5 times) and then it (magically) seems to work again. I have also tried switching from network-manager to wicd, but the problem persists. With both network-manager and wicd, I've tried simulating a reboot for the wireless by using the command 'sudo modprobe -r iwl3945 && sudo modprobe iwl3945' (network-manager) and 'sudo /etc/init.d/wicd restart' (wicd), but these do not seem to work.
View 9 Replies View Relatedlooks like everything upgraded like the other upgrades I did on a couple other machines this weekend, but upon reboot, I get a mouse pointer (inop) and the little 'drum beat' audio file plays, and it goes into a loop (blank screen, pointer, audio...(repeat)...)
upgraded from 9.10 (both old and new versions are the x64 version) (my successful upgrades to 10.04 were on both x86 and x64 versions)
Lenovo T400
dual boot w/ xp (grub seems to work just fine)
I checked the menu.lst (~) for proper kernel versions as mentioned in another post, and they looked correct to me.
I rebooted, and got a new GRUB error:
recordfail=1
if [ -n ${have_grubenv} ]; then save_env recordfail; fi
set quiet=1
insmod ext2
set root=(hd0,2)
search --no-floppy --fs-uuid --set 7b4afbe0-28fe-4403-bd86-c4364bf10f98
linux /boot/vmlinuz-2.6.31-16-generic root=UUID=7b4afbe0-28fe-4403-bd86-c4364bf10f98 ro single
initrd /boot/initrd.img-2.6.31-16-generic
I have been running Ubuntu for 2 years and have not had a problem like this. Randomly one day my wireless dropped out. I can see other networks on my laptop, but they are all locked so i cant test and see if i can connect to them so i went to my friends house and was connect fine for over an hour.
Also my PS3 and my windows box connect to my router and internet just fine.
I then assumed that this was a hardware issue then with my wireless card on my laptop. So i called up lenovo and they sent me a new wireless card. I installed it and still had the same problem.
Lenovo t400
Intel 5300 Wireless
Ubuntu 10.4
Router
Dlink-655
I realixe i am not giving to much information, let me know what you need and i will provide it.
I tried buying a new router now and it worked great!!!..... for an hour. Now it is doing the same thing.
I'm using an Acer Aspire One d250 running Netubuntu 10.04. The wireless connection to my router fails at random intervals and spends most of it's time trying to reconnect. It will occasionally ask me to input the password to the network, which is already entered in the dialog box, and clicking "connect" doesn't seem to make any difference. Also, when it is disconnected from the network, none of the other computers in the house, wired or wireless, are having any problems. If there is any more information I could provide,
View 1 Replies View RelatedCannot get wireless to work. Hostapd.conf had nothing inserted in it so I put the following in which I found [URL]..So it connected right away and then disconnected after opening one of my tabs. I went back into hostapd.conf and it had erased all the info I put in there. Is there a way to keep it from deleting this info every time. Because it worked great for a brief second. Otherwise it just keeps going on, then going off. It stays off most of the time though. Right now this is what my iwconfig reads:
[Code]...
I have 2 nvidia gfx cards, if I use the nvidia settings tool to view 2 monitors with the same gfx card works fine, when i use one gfx card for one monitor and the other gfx card for the other monitor X doesnt start and just cycles through monitor flashes.
View 2 Replies View RelatedI am new to Ubuntu and am confused on how to fix my flashing wireless light issue. After browsing Google people are recommending that I make a script and put it into a folder, but when I try to put the file in there I get an error of "Error moving file: Permission denied".
Code in script...
I installed Ubuntu 10.10 64-bit, downloaded Adobe reader '.bin', from the terminal
It extracted and asked me for a installation location, to which i put [~]
It then finished the installation.
But when i click on the icon in the start menu or on desktop it fails to start, when i also click on a .pdf document it also fails to start!
Using Wicd and it keeps dropping out or telling me "bad password" when the password is in fact correct. I even know it works because the first couple of times it worked, but the connection wasn't sustained for more than a few seconds each time. My reasoning is my wireless is functional in Ubuntu, there's no reason it shouldn't be in Debian. Wireless network card is ASUS PCE-N13. Ralink driver is installed. WPA-supplicant is installed. Gnome Network Manager is also present, though I've heard that it doesn't support my particular situation.
View 5 Replies View RelatedI have a Compaq Presario CQ60 laptop and have one of those wireless light indicators. For me the light glows orange when the wireless is OFF and blue when the wireless is ON. In Ubuntu 9.10 (Karmic) the light was always orange, even if the Wireless was on, but my wireless worked right out of the box so I was grateful for that, but since upgrading to Ubuntu 10.04 (Lucid) I've noticed that my wireless light alternates between orange and blue frequently and sometimes flashes madly when wireless activity is occurring.
I was wondering if there is a fix for this as it can get quite annoying, the light sometimes stays blue for a while but will ultimately keep going back to orange and vice-versa, my friend who also has a Compaq Presario CQ61 (Revised model of mine) has his wireless light constantly blinking orange and blue no matter what.The wireless itself works fine, I can connect to any wireless connection and use it without having to install anything else, so it does work out of the box, which again, I'm grateful for.The wireless adapter is a Atheros AR5001 Wireless network adapter. Do I need to install additional packages or drivers to get the wireless adapter to work properly?
When I try to use Wubi to install Ubuntu it fails on reboot. It seems to run a script on reboot then nothing. I get a command prompt window with the script and the laptop seems to lock up. Only a hard re-boot will restart the system. I do get a dual screen boot prompt Windows/Umbutu but if I choose Umbutu, I get the same command prompt screen and the system is locked up again. Chosing Windows at the boot screen works fine.
View 3 Replies View RelatedI did a search and couldn't find anything pertaining to this - if I've missed something please direct me in the right direction We have an Ubuntu box set up as a headless office server (latest desktop install of Ubuntu) and we recently set up two 1TB HDDs in a RAID1 array using mdadm - as far as I can tell it worked successfully and created /dev/md0 with an ext3 file system. After sharing the drive I can see it from the other office computers and could transfer data to and from the RAID array just fine.
I didn't figure out how to get it to automatically mount on boot so I restarted it to see if it would do so by default - however, when I restarted I couldn't see the RAID array any longer on the desktop and it came up as a 0.0kb RAID array in Disk Utility, saying it was broken. It wouldn't let me check it until I stopped and restarted the array.
After restarting I hit "check array" and it appears to be repairing the drives. What have I missed? What happened here? How can I fix it? What other info can I provide to assist:
sudo blkid shows:
/dev/sda1: UUID: "<snip>" TYPE="ext3" (system HDD)
/dev/sda5: UUID: "<snip>" TYPE="swap"
/dev/sdc1: UUID: "<snip>" TYPE="linux_raid_member"
/dev/sdb1: UUID: "<snip>" TYPE="linux_raid_member"
/dev/md0: UUID: "<snip>" SEC_TYPE="ext2" TYPE="ext3"
disk utility: RAID Array: Mirror (RAID-1), Metadata version 0.90.0, Partitioning: Not Partitioned, Components: 2...
since it started i cannot launch software-center, vlc, emesene... they all stopped working... i checked the logs of synaptic to see if i removed a python package and i didn't. i tried selecting all python packages for reinstall, and it didn't help! i really don't want to reinstall ubuntu.
View 9 Replies View RelatedI don't know if this is the right place to post this but here goes anyway.
System:
ASUS Pro50n Laptop
Distro: Arch Linux
WM/DE: Gnome
I've recently installed Arch linux with the gnome desktop environment, and everything is working fine apart from HAL and DBUS. I'm not sure why this problem is happening and I have no idea about any settings for HAL and DBUS all I know is what it says in the wiki.
The problem I have is that HAL and DBUS fail to start. I have tried /etc/rc.d/hal start and get the message BUSY.. then FAIL. I have tried /etc/rc.d/dbus start and get exactly the same. I have tried restart and that also fails. *EDIT* I have just tried /etc/rc.d/dbus start again without changing a thing and dbus has started successfully but HAL still fails.
The further problem, which I think is related to HAL not starting... possibly... Is that I can't watch DVD's / anything in the DVD drive. I can see it in Places >Computer as "CD/DVD Drive: 3_MEN_IN_ANOTHER_BOAT" but when I click to load it or if I open Totem and try and load it all I get is the error: Unable to mount location: Not Authorized. Is this related to HAL or is this a completely different issue?
*EDIT* fixed the HAL problem, reinstalled xf86-input-evdev package and it seemed to fix the problem. However I am still having a problem with watching DVD's
I type this 10,20,30,40,50 * * * * /root/auto.pl
my log file
Jun 23 10:10:01 localhost crond[7702]: (root) CMD (/root/auto.pl)
Jun 23 10:20:01 localhost crond[12022]: (root) CMD (/root/auto.pl)
Jun 23 10:30:01 localhost crond[14610]: (root) CMD (/root/auto.pl)
Jun 23 10:40:01 localhost crond[18676]: (root) CMD (/root/auto.pl)
Jun 23 10:50:01 localhost crond[22402]: (root) CMD (/root/auto.pl)
Jun 23 11:01:01 localhost crond[29476]: (root) CMD (run-parts/etc/cron.hourly)
but my application doesnt run at all. my script is in perl language
I'm installing 10.4 x64 on a Dell PowerEdge R610 RAID 1 and the install goes fine until I have to reboot the finish it. On reboot after about a minute it gives the error
Code:
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline/
-check rootdelay= (did the system wait long enough?)
-check root= (did the system wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mapper/mysql1-root does not exist. Dropping to shell!
what to do and my co-worker who knows a little more about Linux can't get it to let him check any of the above common problems.
We're tried letting GRUB manually configure itself at the end og the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.
EDIT: in the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same
I'm installing 10.4 x64 on a Dell PowerEdge R610 in a RAID 1 configuration and the install goes fine until I have to reboot the server to finish the install. On reboot after about a minute it gives the error.We've tried letting GRUB manually configure itself at the end of the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.In the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same.I've got 3 of these server to get setup and running as part of our back end and network restructuring and have been stuck at this point on the first one since Friday.
View 9 Replies View RelatedJust installed Ubuntu a month ago (installed within windows), and for the 2nd time it has gotten stuck in grub upon restart after doing an automatic update. Last time, I reinstalled from the CD, but I can't do that every time. Learning how to start up from grub would probably be worth learning so I don't have to use the CD. But fixing the problem is most important. It makes me wonder if it was a mistake to install Ubuntu from within Windows (does this mean I have "wubu"?). I did find a webpage on booting Ubuntu from grub, but I could not get the kernel to load, regardless of if I used the instructions for wubu or not.
View 3 Replies View RelatedOver the past few days, I've noticed that administrative tasks sometimes fail to start. I'm asked to enter the administrative password, "Granting rights" appears in the bottom panel for a few seconds, but then disappears. I'm using Debian Lenny. This is only an intermittent problem, and if a task does fail to start, it will start on the next attempt. Tasks which have failed to start are:
*Launching Synaptic form the System menu.
*Launching a root terminal from the Applications menu.
*Launching Nautilus with root privileges from a terminal using gksu.
After coming across the following post, I thought maybe it was an issue with kernel 2.6.32-bpo.5-686, because I'd recently upgraded to that kernel too, but I'm advised that that isn't so.It was suggested that something else from backports might be causing the problem.
My dhcpd service get failed every time when I try to start it
1) Actually I have a lan connection which has a static ip network 192.168.10.0/24 and the pc to which is using the dhcpd has a ip address 192.168.10.1/24
2) And I have a internet connection wirelessly which has a network 192.168.2.0/24
Now I want to problem ip address in the network of 192.168.10.0/24
Here below is the configuration file of dhcp server:
# dhcpd.conf
#
# Sample configuration file for ISC dhcpd
#
# option definitions common to all supported networks...
option domain-name "example.org";
option domain-name-servers ns1.example.org, ns2.example.org;
# Use this to enble / disable dynamic dns updates globally.
#ddns-update-style none; .....
rhev-h starting NFS service why occur under issue message?
[root@RHEV ~]# /etc/init.d/nfs start
Starting NFS services: exportfs: can't open /var/lib/nfs/rmtab for reading [OK]
Starting NFS daemon: [FAILED]
[root@RHEV ~]# tail /var/log/messages
2010-12-23T09:32:20.507146+00:00 RHEV exportfs[7834]: can't open /var/lib/nfs/rmtab for reading
2010-12-23T09:32:20.562458+00:00 RHEV modprobe: WARNING: Could not open '/lib/modules/2.6.18-194.3.1.el5/kernel/fs/exportfs/exportfs.ko': No such file or directory
2010-12-23T09:32:20.562508+00:00 RHEV modprobe: FATAL: Error inserting nfsd (/lib/modules/2.6.18-194.3.1.el5/kernel/fs/nfsd/nfsd.ko): Unknown symbol in module, or unknown parameter (see dmesg)
2010-12-23T09:32:20.563344+00:00 RHEV nfsd[7838]: nfssvc: No such device
I have installed freeradius from repositories in both Debian and Ubuntu. I have built from source with 'fakeroot dpkg-buildpackage -b -uc' on both the official freeradius source code and the source provided by apt-src in both Debian and Ubuntu. On a normal install via aptitude there is no ssl-support, I understand this is because of license issues. Otherwise is works, but is of course useless in a wifi-auth setup. On a install from source code, after editing debian/rules and debian/control as recommended different places on the net, freeradius fail to start because of ssl error. Same on install via source code downloaded directly from [URL]... Anyone have a working ssl-enabled freeradius server running Debian or the likes?
View 1 Replies View RelatedI can get connected to the Internet when I reboot the system, but the connection usually fails after within 10 mins. However, even then the network manager says it's connected. Never reconnect, manually or automatically.
View 2 Replies View RelatedI have successfully managed to connect a Razer Orochi bluetooth mouse with no issues. This also connects automatically when i start up the machine.
I also have a Logitech MX5000 keyboard that i can connect but it never survives the reboot. I have to manually connect it each time.
The only difference i can see between the two is the keyboard asks for a passkey whereas the mouse doesnt.
Ubuntu 11.04 32bit.
I have installed fedora 13 , 86_64. and was working fine until now. The problem was that JEXEC service Froze while booting. So I removed it /etc/init.d. The next time when I booted ATD service Froze, so I removed it by the same way. Next it was the turn of CROND followed by KSM , KSMTUNED. Then came ABRT-DAEMON which I had to type a #yum erase abrt* command. Finally it came to the turn of SM-CLIENT. I don't know where it is or what it is. Didn't find quality posts on the internet. What the heck should I do and I dont want to do a reinstall.
View 14 Replies View RelatedI am trying to install opensuse 11.2 as DomU on a Host running also opensuse 11.2. When I use a file as destination everything goes well and the installation finishes with success. But when i install the DomU on an LV (Logical volume) with Yast, once the installation finished and the DomU restarts, I get the Error "Boot Loader didn't return any data"
I mounted the LV and I verified the presence of /boot/vmlinuz-xen, /boot/inirtd-xen, menu/lst etc ....
[Code].....
I configured httpd.conf. With ip, port 80 and specified the document path correctly. But service httpd restart shows httpd stop fail, httpd start fail.
View 1 Replies View RelatedOpenSuSe fail to start if loading on fail safe following msg appears
blogd: no message logging because/var file system is not accessible
I have run defrag through XP