Ubuntu :: Fails To Reboot After Updates Gets Stuck In Grub?
Mar 9, 2010
Just installed Ubuntu a month ago (installed within windows), and for the 2nd time it has gotten stuck in grub upon restart after doing an automatic update. Last time, I reinstalled from the CD, but I can't do that every time. Learning how to start up from grub would probably be worth learning so I don't have to use the CD. But fixing the problem is most important. It makes me wonder if it was a mistake to install Ubuntu from within Windows (does this mean I have "wubu"?). I did find a webpage on booting Ubuntu from grub, but I could not get the kernel to load, regardless of if I used the instructions for wubu or not.
View 3 Replies
ADVERTISEMENT
Aug 5, 2009
Just when I had everything running so well. Graphics were good and I even had multiple VM's running. Today FC says I have 246 updates. The updates good through fine. I reboot my machine and now it's stuck. ArrrgIt is stuck at the message: ADDRCONF (NETDEV_CHANGE): eth0: link becomes ready
View 9 Replies
View Related
Mar 23, 2011
Today i downloaded ubuntu netbook edition from the official site to give it a go on my netbook currently runnin win 7 starter. I followed the instructions here: url download but when i reboot with the USB it gets stuck saying " SYSLINUX 4.02 2009-05-29 EBIOS Copyright (C) 1994-2010 H. Peter Anvin et al" with a flashing cursor. I have read that i should type help there but it wont let me type anything, its just stuck.
View 3 Replies
View Related
Jun 4, 2011
So I have 2 ide hdds but whenever they are both connected, grub gets stuck at GRUB loading stage 1.5. how can I resolve this problem?
both are Maxtors with ext4 fs. primary is 20 gb and secondary 80 gb.
Jumpers are set to cable select.
Boot order in bios is correct. (primary first, secondary isn't in the list at all)
View 8 Replies
View Related
Sep 1, 2011
It's trying to fix/complete failed installs but keeps encountering the same errors (error message below). I'm running basically Testing, but there are a few Stable and SID packages due to issues with the blasted nVidia legacy drivers. I've swapped out the video board with an ATI board so that is sorted, but now I can't do any updates. Hoping there is some way to manually override apt's determination to try to fix all broken packages whenever I do anything (install, remove, update, etc). A Google search of this error message didn't turn up anything recent. Any thoughts are welcome.
[Code].....
View 2 Replies
View Related
Jun 2, 2010
it stuck after loading. should got login window. instead it show me a blank page and a blinking courser i can only press ctrl+alt+del it will reboot my laptop n stuck after the loading process
View 2 Replies
View Related
Nov 5, 2010
Where can I find the updates time line that requires Ubuntu server reboots for this year? Is there such a list ?
View 4 Replies
View Related
Apr 2, 2011
I'm running Ubuntu 10.04 LTS. Last night I was doing some admin on this box, it's running apache and ASSP for spam filtering. Once I finished I started some updates.I checked for updates and applied them, but fell asleep. This morning, my session had timed out at continue. I reconnected and saw a message stating a reboot was required.I've rebooted, my usual services are running, eg apache and ASSP. I can view pages on apache and the admin page for ASSP. I'm remote from the system, so connecting over the internet and when I try to connect, it fails.
Quite urgent, however at least my services are working. However I'm not happy that I can't access the system myself.I don't know if this is my own fault for leaving updates unattended or if an update caused the problem. Thanks.
View 8 Replies
View Related
Sep 4, 2009
After installation of Fedora 11, I click reboot, it ejects out the disk, but is stuck at the screen for a long time and doesn't reboot so I manually had to reboot it. Today, surfing on firefox, it got frozen, and the touchpad worked, but everything was frozen nothing moved so I had to manually shut the laptop down. On bootup everything was ok. Im worried about corrupted files.Should I just reinstall Fedora 11? m using a dell studio 1555 laptop
View 4 Replies
View Related
Jan 20, 2010
Recently I've updated my small file server at home (Ubuntu 9.10) (Linux ubuntu 2.6.31-16-generic) and after I restarted my system No Ports where open anymore. I use ssh, vsftpd, apache2 and samba ... nothing start after reboot, I have to start it manually. I don't know what happened and if is it even direct result of some updates. I have another machine like that at work and there was no problems after resent updates.
View 1 Replies
View Related
Aug 22, 2010
When I try to use Wubi to install Ubuntu it fails on reboot. It seems to run a script on reboot then nothing. I get a command prompt window with the script and the laptop seems to lock up. Only a hard re-boot will restart the system. I do get a dual screen boot prompt Windows/Umbutu but if I choose Umbutu, I get the same command prompt screen and the system is locked up again. Chosing Windows at the boot screen works fine.
View 3 Replies
View Related
Feb 12, 2011
I'm currently administering an Ubuntu box remotely. It's set to install security updates automatically, and it notifies me when I log in via ssh whether it has installed an update which requires a reboot. For example, if it installed a kernel update a few days ago, the update manager will touch a "reboot_required" file in /var/run, and when I ssh into the machine today I'll be greeted with a "System restart required" message. Is there a similar functionality for yum or Packagekit?
View 1 Replies
View Related
Sep 8, 2010
I did a search and couldn't find anything pertaining to this - if I've missed something please direct me in the right direction We have an Ubuntu box set up as a headless office server (latest desktop install of Ubuntu) and we recently set up two 1TB HDDs in a RAID1 array using mdadm - as far as I can tell it worked successfully and created /dev/md0 with an ext3 file system. After sharing the drive I can see it from the other office computers and could transfer data to and from the RAID array just fine.
I didn't figure out how to get it to automatically mount on boot so I restarted it to see if it would do so by default - however, when I restarted I couldn't see the RAID array any longer on the desktop and it came up as a 0.0kb RAID array in Disk Utility, saying it was broken. It wouldn't let me check it until I stopped and restarted the array.
After restarting I hit "check array" and it appears to be repairing the drives. What have I missed? What happened here? How can I fix it? What other info can I provide to assist:
sudo blkid shows:
/dev/sda1: UUID: "<snip>" TYPE="ext3" (system HDD)
/dev/sda5: UUID: "<snip>" TYPE="swap"
/dev/sdc1: UUID: "<snip>" TYPE="linux_raid_member"
/dev/sdb1: UUID: "<snip>" TYPE="linux_raid_member"
/dev/md0: UUID: "<snip>" SEC_TYPE="ext2" TYPE="ext3"
disk utility: RAID Array: Mirror (RAID-1), Metadata version 0.90.0, Partitioning: Not Partitioned, Components: 2...
View 1 Replies
View Related
Jan 28, 2011
I am new to Ubuntu and I am running v10.10 through VMPlayer on Windows 7. I wanted to run the updates through the Update Manager. After downloading them and installing them, my VM rebooted and has not worked properly ever since.
When it boots now I get a screen which has my computer name "jason-virtual-machine" and its just frozen there. I tried the "recovery mode" but that does not boot up either.
What happened and what can I do to fix this?
View 7 Replies
View Related
Jan 10, 2010
I recently installed Ubuntu 9.10 on an old computerd lying around and have been pleasantly surprised by it.I had a small problem with firefox not connecting to the internet but I managed to fix this by disabling ipv6 in about:config.The problem I now have is that update manager fails to download updates and gives a message saying failed to fetch several files.I'm connected to the internet via a wired router
View 7 Replies
View Related
Sep 1, 2011
I've a permanent USB running natty. Synaptic would like to upgrade the kernel packages, but it fails with cryptsetup failure.
Code:
How can I get around this? Is it enough if I remove cryptsetup? AFAIK, my devices are not encrypted (at least /etc/crypttab) is empty).
View 2 Replies
View Related
May 17, 2010
I'm installing 10.4 x64 on a Dell PowerEdge R610 RAID 1 and the install goes fine until I have to reboot the finish it. On reboot after about a minute it gives the error
Code:
Gave up waiting for root device. Common problems:
-Boot args (cat /proc/cmdline/
-check rootdelay= (did the system wait long enough?)
-check root= (did the system wait for the right device?)
-Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/mapper/mysql1-root does not exist. Dropping to shell!
what to do and my co-worker who knows a little more about Linux can't get it to let him check any of the above common problems.
We're tried letting GRUB manually configure itself at the end og the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.
EDIT: in the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same
View 9 Replies
View Related
May 18, 2010
I'm installing 10.4 x64 on a Dell PowerEdge R610 in a RAID 1 configuration and the install goes fine until I have to reboot the server to finish the install. On reboot after about a minute it gives the error.We've tried letting GRUB manually configure itself at the end of the install before we reboot and we've also pointed it to /dev/sba partition which is what should be the boot partition.In the code tag it's ALERT! /dev/mapper/mysql(one)-root.... the L and 1 look the same.I've got 3 of these server to get setup and running as part of our back end and network restructuring and have been stuck at this point on the first one since Friday.
View 9 Replies
View Related
Dec 30, 2010
I recently installed Ubuntu 10.04.1 LTS and have it set to dual-boot with windows 7 on my gateway tablet PC. Since installing, sometimes when I suspend or reboot, my wireless does not work. To be more clear - it is working fine, then I either suspend/reboot, then I come back and no wireless networks show up at all. I can still connect with ethernet cable though. I can solve it by rebooting multiple times (usually around 1-5 times) and then it (magically) seems to work again. I have also tried switching from network-manager to wicd, but the problem persists. With both network-manager and wicd, I've tried simulating a reboot for the wireless by using the command 'sudo modprobe -r iwl3945 && sudo modprobe iwl3945' (network-manager) and 'sudo /etc/init.d/wicd restart' (wicd), but these do not seem to work.
View 9 Replies
View Related
Feb 27, 2010
I regularly check for updates via Update Manager. I have, as of today started getting errors, some updates did not upload.
View 2 Replies
View Related
Jan 7, 2010
I just did a software update moments ago of things that were in the auto update thingthere were around 20 of them and some were for abrt and some kerneloops thing...But now i can't boot up...I get the following error...
Code:
[drm:drm_mode_rmfb] *ERROR* tried to remove a fb that we didn't own
Boot has failed, sleeping forever.
[code]....
View 1 Replies
View Related
Feb 14, 2011
I recently upgraded to Fedora 14, and was surprised to find that OpenOffice is not included in the distro like it was in previous versions. Anyways after installing it it was working until while ago when I downloaded the recommended updates, and now when I try to start it, nothing happens.
View 2 Replies
View Related
Jun 1, 2011
I think I need some command line help here. I am trying to download the initial updates using Yum Extender GUI in LDXE desktop. It downloads the updates until about 90% then If I get any error it craps out. I have gotten errors relating to no key avaliable, sorry don't remember the precise text, and also that no repo is avalable for a specific pacakge. At this point there are no options given to skip, etc... just "OK" and Yum Extender closes and I have to start over. It seems to start over about were it left of, this leads me to believe the packges are being stored some where on the drive.
Without using the GUI, hey I'm trying to switch from Windoz, Is there a command line that will tell Yum to download all updates and install and skip errors? I imagine there must be if this package installer is working, it must be talking to the system in a similar manor.
View 5 Replies
View Related
Mar 19, 2010
reason my wireless is constantly failing. the only solution is a reboot but it will start to fail again. I use hp mini 210 ubuntu netbook remix.here is a log file
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Mar 19 19:37:37 nicky-laptop NetworkManager: <info> Activation (wlan0) Stage 1 of 5 (
[code]...
View 4 Replies
View Related
Feb 19, 2011
I can get connected to the Internet when I reboot the system, but the connection usually fails after within 10 mins. However, even then the network manager says it's connected. Never reconnect, manually or automatically.
View 2 Replies
View Related
Aug 18, 2011
I have successfully managed to connect a Razer Orochi bluetooth mouse with no issues. This also connects automatically when i start up the machine.
I also have a Logitech MX5000 keyboard that i can connect but it never survives the reboot. I have to manually connect it each time.
The only difference i can see between the two is the keyboard asks for a passkey whereas the mouse doesnt.
Ubuntu 11.04 32bit.
View 1 Replies
View Related
Nov 26, 2010
I lost power during my Ubuntu update and when I powered back up ubuntu was broken. Now the stupid bit. My hdd was partitioned into 3 bits, vista os, data, and ubuntu. In vista I deleted the ubuntu part and merged it with the data part. Now when I power up my computer it goes straight to a black screen that says...
error : no such partition.
grub rescue> I have looked through the forums for an answer to my problem but to no avail. When I put the ubuntu live cd in and turn back on itjust goes to the same screen. I'm a novice to the world of computers and need any help you can offer.
View 2 Replies
View Related
Jan 4, 2010
I am trying to upgrade from F11 to F12.Using Preupgrade, everything went well and then it asked me to Reboot. Anaconda started then says something about updating some files then the screen goes blank.
View 14 Replies
View Related
Jul 28, 2010
I am having a HARD, PARTIAL FAILURE OF SOUND on my Linux system (Slackware 13.1, the latest, with a 2.6.33.4-smp kernel and KDE 4.4.3). The failure is "HARD" in the sense that once it occurs it remains broken until I reboot the system. It's a "PARTIAL" failure in that it affects ONLY SOME sound software on my system. Here is a list of what fails and what doesn't. (I'm sure there are other programs I could use to test with, but I don't know what they are since I am "just an average user" when it comes to multimedia software.)
These don't fail:
Amarok
KDE event notification
These do fail:
Firefox
Xine
Mplayer
In the things that fail it is only the sound portion of whatever (flash, mp4, etc) which goes away; the video portion plays normally.n I leave my system up for days at a time. The failure occurs some "long-ish" time (days) after I reboot. I have no idea what triggers it. I do not use sound most of the time, but when I do it's music through Amarok (which doesn't fail) so I do not notice the failure when it occurs.
It seems clear to me that it is NOT the failed programs which are at fault but it is, rather, some underlying set of sound libraries and/or servers used in common by all the programs which fail, and that the failure occurs when something happens which affects that set of sound libraries and/or servers. I don't think this is specifically a Slackware issue since I've seen a few other problem reports on the web where the sound simply stops on non-Slackware Linux systems. Some of the problem reports I've seen suggest that playing sound from one program stops sound from other programs. I've tried various combinations of sound-producing programs but none have triggered the problem.
I've looked at /var/log/{messages,debug,syslog} and see nothing relevant. I've gotten process lists from ps before and after the failure and no "relevant" processes have gone away. (But note, as before, that I am NOT a Linux "multimedia guy" so I can only make intelligent guess at what is "relevant".) Does anyone know what this problem is and, better still, how to solve it? Or where I could look for additional clues? Is there some way to "reset" the sound system without having to reboot?
View 5 Replies
View Related
Jun 2, 2010
Got the network settings set up, tried to open firefox - nothing, wouldn't load. went into update manager and started updating the software. The update manager got stuck on updating Grub, I left it to do it's thing while I slept hoping it would finish. I wake up, go back to his pc and it's still stuck on grub, not really anything I could do but shut down his pc and try again, well, his pc doesn't even want to load Ubuntu now. I tried booting up several times, then tried the restore option in the loader, but all I get is this: [URL]...
View 9 Replies
View Related
