Ubuntu Networking :: Can't Connect To Wireless Using Wicd?
Jun 25, 2011
I am running Natty on a Lenovo T410. I can connect to wireless with no problem using the panel applet but not using wicd. syslog shows it trying to get a DHCP address and finally timing out with no lease offers. I think a big clue is that if I monitor wlan0 using wireshark I get no traffic at all when it tries to connect, whereas with the applet I see the dhcp traffic. It seems as though wicd is connecting to the wrong wlan0. Running "dhclient wlan0" directly gives the same behavior as wicd. I need to use wicd because I typically run enlightenment so can't use the ubuntu applet.
View 5 Replies
ADVERTISEMENT
Dec 25, 2010
I'm at a family member's house for the holiday and was trying to use their wifi. Its a WEP connection (I tried to tell them to change but they won't listen). In the wicd connection manager, I see their network, set the encryption to WEP (passphrase), enter the password, and hit connect. It says bringing up the card, checking authentication, then gets to Acquiring IP address, sits there for a minute, then times out saying unable to connect.
I know I used the right password because it passed the Authenticating part (tested with a wrong password that hangs at this point). I know that my wifi card works because I used a store's unsecured wifi connection through wicd. I know the wifi network works because my brother's windows netbook can get on just fine. I'm running through the same router right now with a wire instead. Why I can't connect wirelessly?
View 4 Replies
View Related
May 2, 2011
I recently installed wicd on a notebook with Squeeze. I can connect to the wireless network at my place. However I cannot connect at my friend's place. It timed out with the message: "Connection failed. Cannot obtain ip address."
It is a Thomson router/modem and the key is a 10 digit 64bit Hex. I did not see 64bit Hex option in wicd. So, I tried all 3 WEP options and none of them worked. We can connect to the same network with another computer with Squeeze and NM and also with Windows. This is the first time I am using wicd.
View 2 Replies
View Related
Sep 27, 2009
Newish to linux, been using Ubuntu for about a year, moved onto Sabayon 4.2 now. I also have another laptop with Kubuntu that is using Network Manager, it has no problem connecting to my wireless, one wireless uses WEP and one uses WPA 2. When my main laptop used Ubuntu it was using Network Manager, that connected with no problem. However Sabayon seems to have a problem. Initially I thought it was the DVD that I used to install it in, but after re-burning it and installing from fresh the problem still remains. What happens is that NM when connecting to a wireless prompts for a passkey, I enter it in and it fails right away.
This happens for WEP and WPA. If the network is unsecure then it connects with no problem. So I emerged WICD 1.6 to see if that would work, it hangs on 'Obtaining IP Address'. If I put static IP then it connects, but this cant be an option as at my University campus I cant set a static IP. I have tried to find the log file for NM, but cannot locate it. I understand that it should be located in /var/log/daemon.log, but daemon.log does not exist on my system. I checked every NM directory and could not find any log files. I have tried changing the settings in WICD to no effect.
View 3 Replies
View Related
Jun 19, 2010
I had a wireless connection to open suse from last year. I then had a problem with my Netgear 824 router.
I have reconnected to windows vista. Now I have to get opensuse working on wireless. I do not have much experience in opensuse I have read the forums and the sticky and also from wicd forums. I have checked the yast settings and it is for AR242x ath0 and Wired L2 100 eth0.
Details:-
Opensuse version 11 ,2.6.25-1.1 default
Laptop ASus F5RL
Atheros AR242x
I have done the following:-
[Code]...
View 1 Replies
View Related
May 24, 2011
I just upgraded to 13.37, and for some reason wicd now cannot connect to my wireless point. It keeps saying the password is wrong, when I know for an absolute fact that it is correct (even changed the password to '1' just to make sure, and no dice. Which is weird because even though its the exact same version of wicd, and not only that, it no longer seems to be able to see networks with my built in card, so having to use a USB card. Anyway, googling turned up very little. Seems to be a common problem across distros, and some people reported that downgrading to 1.6.x fixes it.
So, I ran
Code:
removepkg wicd
And it uninstalled wicd. Downloaded wicd-1.6.2.1-x86_64-1.txz from a 13.0 mirror and did
Code:
installpkg wicd-1.6.2.1-x86_64-1.txz
While in the correct directory. It installed, and I ran wicd. But checking the version number when it loaded, it says its 1.7.0 again.
Not really sure why this happens. I'm assuming there's some remnant of wicd that removepkg doesn't dump, and its preventing me from installing this older version of wicd. What do I need to do for this? If anyone has a surefire way to make 1.7 work again, that would be fine.
View 7 Replies
View Related
Jul 1, 2010
I installed Wicd in my F13 but I got problems when starting it When I try to start it I got error message:
Could not connect to wicd's D-Bus interface - Check the wicd log for error messages.
View 11 Replies
View Related
Dec 17, 2010
I'v just installed wicd. I can't get it to sart, I get errors saying that wicd couldn't connect to it's dbus interface and the wicd deamon has shut down. Then there's a report from SELinux saying that it's preventing /usr/bin/python "write" access on /etc/dhcp/manager-settings.conf and that access is denied to wicd. I can get wicd to start if I su to root, but I'd like to not have to do that every time I boot. Is there a fix?
View 1 Replies
View Related
Mar 5, 2010
After I upgraded to current(Tue Mar 2 19:07:31 UTC 2010), I could not connect to any wireless network. It will always failed in obtaining IP address. When I rebuild the package and upgrade with the new one, the problem gone. Also I notice that the package I rebuild is different with the one on the stock tree:
Code:
..ckware-mirrors/slackware64-current% md5sum /tmp/wicd-1.7.0-x86_64-1.txz
446ff631eee4c862263ad0488e3a38be /tmp/wicd-1.7.0-x86_64-1.txz
grissiom 2010-03-05 17:21 @darkstar
[code]....
View 6 Replies
View Related
Mar 12, 2010
I've installed ubuntu 9.10 using a minimal install and started from there installing the rest of the things I needed.
I'm running KDE4.4 and Wicd 1.6.1.
Problem is, wicd worked fine, but I don't know what happened before I got this annoying problem.
After logging into KDE, wicd asks me for my password in order to connect to the network-device. After filling that in, I get the message code...
As you can see in the logging, internet is working fine. I manually have to start wicd-client and I get an extra wicd-icon in the taskbar showing me the signal strength as it should do.
I've been searching a lot, but can't find anything about this, except a lot of people having the same errormessage, but they have some errors in the wicd.log too.
View 2 Replies
View Related
Apr 10, 2010
i just installed ubuntu 9.10 netbook remix on my acer aspireone ao532h netbook, and so far, it's been working beautifully. much better than the windows 7 starter edition that came with the machine. the only problem i've experienced so far had to do with the wireless connection. initially, the connection would drop during certain types of activities (e.g. downloading updates or programs, or even streaming videos videos) and the network manager would freeze so completely that i'd have to hard reboot. that seems to have been fixed by installing wicd (following a suggestion here: http://ubuntuforums.org/showthread.php?t=1135723&page=2), meaning that it hasn't disconnected in the several hours since i've been using it. however, wicd has a different problem: it disconnects after a suspend / resume cycle. this requires a reboot to fix also, as not only does it disconnect, but it looses awareness of the network altogether. obviously, this could be a real headache on a netbook that gets closed and opened frequently.
View 2 Replies
View Related
Jul 23, 2010
I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
View 9 Replies
View Related
Aug 8, 2011
I am getting "No wireless networks found" using Wicd manager. Below is some info that might help:
iwconfig
Code:
root@root:~# iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[Code].....
View 9 Replies
View Related
Apr 4, 2011
I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
View 1 Replies
View Related
Jul 10, 2010
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
View 3 Replies
View Related
Jun 12, 2010
My wireless (Toshiba laptop, 10.04 64 bit) is just hanging when trying to connect. It was working fine but now nothing. My Wireless antennae is on and my other laptop can connect with no problems. I have restarted the router and the laptop twice.
View 1 Replies
View Related
Jun 11, 2010
These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
View 1 Replies
View Related
Nov 2, 2010
I am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies
View Related
Jan 10, 2011
in linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies
View Related
Jul 28, 2011
I have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies
View Related
May 5, 2011
wlan0 Authentication capabilities :
WPA
WPA2
CIPHER-TKIP
CIPHER-CCMP
Those are my authentication capabilities, obviously. I am using a WEP encryption for my wireless router and according to this, it will not allow me to connect. Is there anyway to allow that? The wireless card works just fine in Windows, even on the same network encryption type. Using a Intel Wireless/Pro 4965 ag. Note* this is my mother's router and whatnot. She won't change it the encryption type.
View 2 Replies
View Related
Jun 17, 2011
The problem with my wireless network. I have Dell DV6 Pavilion 2115 eg laptop and i installed Ubuntu 11.4 and internet and wireless worked, until i reboted my system it has disapear. I cant no longer to connect to a wireless network. It dont shows me any wireless network. My wireless card is Atheros AR 9285 802.11b/g/n Wifi Adapter
View 9 Replies
View Related
Jun 30, 2011
I installed a Tenda W322P wireless card in my dual-boot PC running both Windows XP and Ubuntu 11.04. The card worked straight out of the box on XP, but does not function correctly under Ubuntu. My apologies for any missing/irrelevant information, I am having to post this from the Windows boot so the Ubuntu settings are not directly available at the same time as internet access.I followed the process detailed here htURL...to install and configure the driver (I believe from reading other sites that this card is the Ralink RT3062 chipset), blacklisted the original RT2860 driver that was in use (couldn't even get the card to scan for wireless networks with the default driver) and restarted the interface.
Since then, sudo iwlist scan can find my wireless router but when I attempt to connect to it, it seems to enter a loop of requesting the WEP key then pausing for a while before re-requesting the key. I know I have the key value correct because it is copied and pasted from the same text file I used to copy and paste into the passkey field on the Windows boot. Attempting to connect to the router using Ubuntu also has the rather unfortunate side-effect of crashing the wireless router, killing off all other device connections until the router has been reset.
View 2 Replies
View Related
Jul 3, 2010
Removed Network Manager (Wicd) - Now Can't Connect To Internet
View 1 Replies
View Related
May 14, 2010
Code:
*-network
description: Ethernet interface
product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller
vendor: Realtek Semiconductor Co., Ltd.
[Code].....
I've read around blacklisting but I'm not sure on what I should be blacklisting really.
View 9 Replies
View Related
May 5, 2009
I am having a little trouble connecting to my wireless network. Running Fedora 10 32 bit.I'm trying to connect to a hidden wireless network. I updated the firmware for my driver but apparantly the driver is still not working. Broadcom has a driver from their website for Linux 32 bit systems. Should I attempt to install it? I read a post where the driver is built into the system kernel. If so I would need to blacklist the one of the drivers. Correct?
[justin@justin ~]$ iwlist scan
lo Interface doesn't support scanning.
eth0 Interface doesn't support scanning.
wmaster0 Interface doesn't support scanning.
code....
View 7 Replies
View Related
Feb 16, 2010
well traded my desktop for it and its a Dell Inspiron 1721. The Wireless was working fin when it had Windows vista on it but when I installed Ubuntu 9.10 The wireless just seemed to not exist. The LED wouldnt even turn on. So I installed wicd and then the wireless icon began working but it still won't find any wireless networks.
View 4 Replies
View Related
Nov 20, 2015
I tried to install wicd so I can connect to my wireless internet, but it gives me the following output:
/usr/share/wicd/gtk/gui.py:458: Warning: Source ID 54 was not found when attempting to remove it
gobject.source_remove(self.update_cb)
ERROR:dbus.connection:Exception in handler for D-Bus signal:
Traceback (most recent call last):
File "/usr/lib/python2.7/dist-packages/dbus/connection.py", line 230, in maybe_handle_message
self._handler(*args, **kwargs)
File "/usr/share/wicd/gtk/gui.py", line 253, in handle_connection_results
error(self.window, language[results], block=False)
KeyError: dbus.String(u'bad_pass')
I have checked that the pasword is correct. I had network-manager installed but it has been uninstalled. I am trying to connect to a WPA2PSK router. I might be a firmware problem, since I get a 'message' on the start screen that there are some problems with my firmware, but I can't figure out how to check if it is broken, or how to configure it so it is correct.
I have the qualcomm atheros ar9485 wireless card. As far as I can tell, the driver for that is either ath3k or ath9k, both are installed. The message I get when I start the computer is: usb 1-1.1: firmware: failed to load ar3k/AthrBT_0x01020200.dfu (-2).
View 14 Replies
View Related
Jun 13, 2010
I recently purchased a laptop from zareason. Seems great, only I've been struggling with getting the wireless to work. I feel like I'm awfully close.
Note: I'm running Lenny.
I downloaded what I thought was the driver for the card. The card info is:
Intel
Model 533AN_MMW
Intel WiFi Link 5300
MAC 00216A72EE22
TA: E50434804
I've successfully install wicd, but it doesn't detect any wireless network. Other computers seem to register the wireless network in my apartment.
View 11 Replies
View Related
Mar 10, 2010
My area does not have broadband, but I am able to get 3G on my cell phone. So, I've been tethering it to my laptop when needed, but what I'd like to do is set up my Slackware 13.0 box (which is configured to run as firewall/router/dhcp server so that I can just turn on my phone's wireless router program, and then share it out over the whole network in my house. I'm using a Gigabyte b/g wireless card, which has the RT61 chipset in it. I have NO problems at all getting the wireless card to work with just setting up rc.inet1.conf. The only problem here is when I need to take my cell phone with me, I will not be able to simply turn it back into a WAP, and have my Slackware box auto reconnect to it.
This is why I started looking into using WICD. I do NOT run X, so that's why WICD fits the bill, since it has a cli version. First I tried installing the version that came on the CD. No dice there. I removed that package, and tried the 1.7 package that's on the mirrors under current. I used slackpkg to install it. WICD will run, see wlan0, sees my WAP and a few others, but it fails to connect. It attempts to up the interface, and use dhcp to get an ip, but it fails everytime. My phone's WAP program only does WEP, but I can't get WICD to get an IP with our without WEP enabled. I made sure that my rc.inet1.conf file does not reference any interfaces.
View 14 Replies
View Related
