Fedora Networking :: No Internet Connection Although Network Manager And Icon On Upper Bar Says Connected
Jun 22, 2011
I recently installed fedora 15 on my computer but I have a huge problem. I can connect to my router wirelessly for a couple of minutes only. Afterwards my computer has no Internet connection although the network manager and the icon on the upper bar says that i am still connected. I tried editing the /etc/rc.local and /etc/resolv.conf as mentioned in other posts in here bit no luck so far.
I can connect to the wireless at my school, but the connection drops frequently and regularly. Network Manager still shows bars indicating the network strength and shows that it's connected to the network in the dropdown. Selecting the network again causes it to indicate that it disconnects and reconnects. At this point I have wireless until the connection drops again. Possibly relevant details: This is the Purdue PAL2.0 network, which can be tricky to connect to, particularly for Linux users. It's a hidden network using WPA2 and PEAP. My computer is a Dell Inspiron 1420n laptop, circa August 2007.
I'm running Ubuntu 9.10 with fluxbox installed. Occasionally my internet connection will stop working, but when I check on wifi radar, I'm still connected to the network. The router is not plugged into a computer at the moment, just the cable jack. It is likely a hardware problem however, since my other laptops also experience disconnects. Any help beyond "change the cable" would be greatly appreciated. For instance, even though I am connected to the network, I cannot post at the moment due to lack of internet connection.
I've read a lot on the internet about various ways of doing this but i've been unsuccessful each time. Basically what i've done is accidently un-installed network-manager because I was having trouble staying connected on my WPA network. The easiest way of reinstalling it I know of is using the CD but I don't have a CD ROM drive and the pen drive I used to install it I no longer have.
I tried using a program called Keryx but you need python installed and from some reason this doesn't come with ubuntu 10.10. I've also downloaded the .deb packages but I still need to download 200kb which is a killer. I've also downloaded it from here too [URL] but the install file makes no sense to me as i'm not a massive linux user. One last thing reinstalling isn't really an option as i've already put a lot of time into setting up this computer.
1 linksys router: gets the net from PPPOE and give the network DHCP. The router IP is 192.168.1.1. 1 windows laptop that work wireless and wired. 1 debian desktop that work wired and not working wireless. THe problem with the debian desktop is like this: I have a TP-Link TL-WN321G installed and found by lsusb command. I make a wireless connection WPA Personal (just like the router settings) it says i am connected to the wl network but no internet connection. the route command give me this:
[code]....
I tryed with wicd who said that the connection is WEP (and it's not, it is setup to WPA on the router and the network-manager conncetion) and when i try to connect i get bad password. I tryed with network-manager uninstalled and no chance.
I have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?
How do I tell the shared connection that it has a static IP and that I dont want a DHCP on the network?Do I have to set up DHCP on the box with the shared connection, even if that box only runs DHCP for a single IP address being the eth0 that is shared?Or can I tell the shared connection that it has a static IP and still allow network manager to run the shared connection?Or should I specify static IP's for all clients and the shared network manager and install say firestarter on the gateway to run the NAT for the eth0 out to eth1.
I just installed, and evolution doesn't seem to think it has internet. The icon with the power cord in the bottom left is unplugged, and send/receive is greyed out. Internet is working , but it is not using network manager, since network manager says no internet is connected. Maybe this has something to do with it?
I just installed a dualboot win7/F15 on my laptop (dell XPS 15) and everything seems to be working fine except that when I connect to my network it is connected and the network is accessible (I can visit my gateway/ router) but when I try to visit a website it simply never ends loading it.Internet is working on win7 so it isn't my network's fault.Now I found somewhere that updating could help but since I dont have internet I can't update
I have assigned ip address to laptop by editing /etc/network.interfaces. From next reboot the Network Manager Applet which was present on right hand upper corner, disappeared. I wonder why? This has happened with 9.04, 9.10 and now in 10.04. Another question is, are Network Manager settings (ip) and /etc/network/interfaces do correspond to same thing or not? As I have narrated above, since network manager applet is no more visible how to see the physical network cable connectivity status (as we do in windows xp)? (is there any other app of such kind or what?)
I've been using Fedora 13 for a few months now on my desktop and since ethernet is not a choice I needed to use a wlan adapter. I did a little research and ended up using a Linksys WUSB54G ver. 4 which worked great (plug and play, no ndiswrapper or any other configuration required) on my wireless g network, using WEP protection. About a week ago I started looking for methods of upgrading my system because. well I just like being somewhat current.
Anyway I used a Fedora 14 Install DVD and used the upgrade option and it worked. All my settings (seem) to be exactly the same as my Fedora 13 settings were and the appearance and location of files etc. are all the same. Now, for some odd reason, to me at least, Fedora isn't showing a wlan icon in the upper right hand (by the way I'm using GNOME) corner like it used to and doesn't seem to have configured my wlan device correctly. I ran lsusb and it shows the device ID (13b1:000d) and the name (Linksys WUSB54G v4 802.11g Adapter [Ralink RT2500USB]) I'd just like to get my adapter working again like it did in 13. I have kernel version 2.6.35.6-45.fc14.i686.
I seem to have is trying to get the internet to work. I can go to ..... ect but when I try to run playonlinux it says you do not seem to be connected to the internet, please post if you have anything useful, as I said I am very new to linux so be as detailed as possible.
everything was excellent till yesterday evening but from the evening, when i switched on my pc, the Network Connections icon is missing from the panel of my fedora 12 os. i'm being able to connect to internet from Systems->Preferences->Network connections & check Connect Automatically to my Mobile broadband connection. but i'm not being able to disconnect it. i've to remove the mobile phone from my pc.please put some light on how will I be able to disconnect it (without removing the phone)?
OpenSuse 11.4 Asus Netbook 1000H Following other members in the forums I have installed Opensuse 11.4 on the Netbook. In the early days Ubuntu Netbook Remix worked well for me. But this has been discarded, and the "one size fits all" Ubuntu had become slow and cumbersome. So..... onto my post. Opensuse is working well. The install went beautifully.
It detected the Wireless Internet and I am able to get on line. I also need to share the Internet connection to a desktop. This is done via a small network switch. Thus far I cannot do this. I tried to use ifup to configure a static ip but this busted my Wireless configuration. I went back to knetwork manager. Then I tried to set up the wired network using knetwork manager and under IPV4 "share" the connection. But this blanks out any possiblity of a static address and substitutes dhcp. My desktop cannot ping the this dhcp address. Ubuntu had this thing called Firestarter? - from memory. This configured the system to sharing the network.
I'm trying to share internet connection with my wifi capable mobile device. For that I'm creating ad-hoc wifi connection in networkmanager with 'shared to other computers' ipv4 option. And there is the problem - the device cannot get the setting via DHCP. The firewall is adjusted properly by NM, dnsmasq is started. I've looked at dnsmasq arguments string and found that the temporary config file which is provided by NM is empty. So, where else should I look for a possible reason or should I just post a NM bug?
Fresh install of Fedora 14 from Live cd.Used it for an hour or so, d-loaded some programs, had ti all running great. Wired connection to internet. Had the Network Connection Manager icon in panel. There was an icon saying new updates, alot of them, like 400 or so. Told it to go ahead and up date, left room. Came back hour later was done, said it needed to re boot, so I did. From then on, no internet, not icon, no Network Connection in the drop down list for preferences.
What I have tried:Worked off live cd, again, all works fine, icon, manager, internet all there.In installed version: In terminal, typed service Network Manager, it said unrecognized service.Did yum install network manager. It started to do it, but looked like it was trying to get stuff off mirrors, and of course there is no internet access. error PYCURJ ERROR 6.Of course I can re install, but I figure I will just end up in the same place a few hours from now.
I installed the driver for my network card. iwconfig and ifconfig are all responsive to connecting to the network, I'm given an access point address. Then, I try to connect to a website and no dice. ping www.google.com yields no result. What gives?
I have installed recently the Fedora 8 in a computer and during installation it was set a static IP with the netmask and gateway. At first it worked well, but after some boots the connection begins to fail. It seems that the network-manager withdraws the static IP and tries to get connection via DHCP. Below is the /var/log/messages file during the failed connection:
Code: Sep 19 10:36:53 canario avahi-daemon[1695]: Interface eth0.IPv4 no longer relevant for mDNS. Sep 19 10:36:53 canario avahi-daemon[1695]: Withdrawing address record for fe80::20d:87ff:fe0c:355f on eth0. Sep 19 10:36:53 canario NetworkManager: <info> SWITCH: terminating current connection 'Auto Ethernet (eth0)' because it's no longer valid. Sep 19 10:36:53 canario NetworkManager: <info> Deactivating device eth0. Sep 19 10:37:07 canario system-config-network[2195]: -+ //etc/modprobe.conf #011eth0 alias sis900 .....
I have updated the system this morning and the vpn stopped working!It gives me an error: invalid secrets.I use network manager to connect to a pptp vpn connection, I use fedora 12.Does anyone know the problem?
Just replaced a working install of Ubuntu because i like GS over unity but i cant get my USB760 EVDO card to work. The usual fix of editing the cd.rules file and copying some information into modem.fdi does not seem to work on F15..
Also, noticed that when i attempt to create a broadband connection using network manager it allows me to go through all of the setup dialogs, but never actually adds the broadband connection.
I have 2 workstations that I'm trying to network together so that I can backup each to the other. One is XP sp2 and the other Fedora 9. Since installing Samba on the Fedora box and trying to get it configured, I have a problem that Add/remove programs won't do installs because it says there's no connection to a network. Network Manager says there aren't any connections, but it worked before the Samba install. Mozilla and Thunderbird can access the internet OK. Both workstations are connected by cable to my router and thus to my ISP (DNS server).
Two questions:- where can I find hints on setting up a wired connection (which card's MAC address does it want? router or wrkstn?) and Am I right that Add/remove is stuffed because of Network Manager?I now have Samba working from Linux to XP, but still can't get into Linux from XP. I tried the Linux PC's MAC address and set up a wired connection in Network Manager. NM still thinks there isn't one...
I have just started using fedora 13 and I am not sure if i am in the right area but here goes...today I was online in my fedora 13 partition on my laptop and I had been online for quite a while then I shut down my machine to recharge the battery then a couple hours later I turned it back on and all of a sudden my network manager applet was missing and I could not connect to the internet, I opened firefox and tried to get to my homepage but it basically just told me that I wasnt connected..
I suspected at first for some strange reason that MAYBE it was my NIC so I booted up into my vista partition and low and behold the internet works fine, so the problem is on the linux side, I have tried every command nm-applet but it just keeps saying an instance of nm-applet is already running, I have no clue how to restore the network manager and get my internet back and the only other piece of information I have is that earlier today I did do a bunch of security updates but the internet was working fine all day even after several reboots through out the day.
I have a pppoe adsl connection. When I disconnect and try to reconnect, network-manager keeps asking for my password. I type it again and again with no success. When I reboot, it works again. On ubuntu, I use pppoeconf and it works well. So on Fedora I made a connection with pppoe-setup but neither ifup nor Code:
pppoe-connect commands work. When I type Code: pppoe-connect , it says Code: /usr/sbin/adsl-start: line 217: 13409 Terminated $CONNECT "$@" > /dev/null 2>&1 . When I type
Ifup ppp0 doesn't work either. However, with exactly the same settings, ubuntu connects to the internet.
On the 25th of January, one of my computers randomly stopped being able to connect to the Internet. It was running a dual boot (Ubuntu 10.04.1 LTS & Windows XP SP2), and is connected to the network via an ethernet cable (no wireless). According to the Network Manager, everything is working okay (there was no change from when I was able to access the Internet).
When I would use Firefox, I would get the message "Waiting for (page)...". However, this is not a Firefox only problem, as every program requiring Internet access (e.g. Evolution) is unable to connect to the Internet.
I compared the Internet settings to those of my father's Windows XP SP1 computer, which is able to connect to the Internet. There was no difference, except for the IP Address and Hardware Address. Because of this, I incorrectly deduced that either the actual Ethernet cable or the wall plug was faulty. I tried using a different cable and connecting to the Ethernet wall plug used by the aforementioned computer. Nothing changed. I was still unable to connect.
I didn't worry about it until Tuesday, when my other computer had exactly the same problem. It is running a triple boot between Ubuntu 10.04.1 LTS, Ubuntu 9.04 and Windows XP SP2, and I am unable to obtain Internet access using any partition. As with the previous case, my computer showed no change in the Internet settings, and the computer also shows it as being connected to the network. It is also connected via an Ethernet cable.
I have a Toshiba Satellite L505D-GS6000, and I installed Ubuntu before and it worked flawlessly until I decided that I had to go back to Win7 because of certain program compatibility issues.I'm back here trying to set it up and am having no issues except for with my wireless. I can see all of the SSID's, I am able to connect to my wireless, and it displays that I have been assigned an IP and all of the other settings given by DHCP.
I have been trying to fix this for hours, googled, searched these forums, and have spent time with some people on the Ubuntu IRC channel and we are unable to come up with a fix.
The strange thing is that although nothing will load when I try to visit facebook.com, google.com, or any other website... I opened the update manager and I noticed that it would download for 30ish seconds, stop and do nothing for 60ish seconds, resume for another 30, stop, resume, etc. until it finished. I am able to ping my router, and 8.8.8.8, but I am unable to ping [URL].
I have been using ubuntu 10.04 LTS for the last 5 months, used tata photon plus for networking. Everything went fine when couple of days ago, after doing normal updates as listed by the update manager, sound went off.. to solve this, I had to remove and reinstall certain packages as listed in [URL] ...+documentation, I had to restart, after restarting, the sound problem was gone but the network manager icon went off, the modem was not getting power from the computer though the LAN wire was connected. To add to dismay, the mobile broadband connections that I had added to the network manager were gone. I tried adding the tata photon plus (huwaein) again but could not be added, reinstalled usb-mode switch data and related packages, but still the computer does not detect the photon as usb device. I have broadband dsl connection and tata photon plus too but cant use any of them.
I upgraded to 10.10 the day it came out, and haven't had any problems with internet stuff. My wireless card works without any proprietary drivers. Last night, the computer stopped connecting to the internet. I am still connected to my wifi network, but I can't do anything online. I had assumed that my internet connection was just down in general, and tried resetting the computer, shutting down the computer and then turning it on again, and rebooting the modem, but then my Xbox connected, and my laptop running 10.04 connected, so I'm confused as to what is going in. Any ideas?
got an asus wl500gp v2 and i just had to reflash it. Flashing went through fine, but while setting up the PPPoE connection I got stuck. Here is what the configuration looks like:ADSL Modem ---Ethernet--- Router ---Ethernet--- Laptop I set up OpenWRT to connect over PPPoE over the WAN port and the connection is established:
PAP authentication succeeded peer from calling number XX:XX:XX:XX authorized replacing old default route to br-lan
if i'm connected to my wireless network it only gives me internet acces for a few minutes. The connection with my network stays but i have to close it back of and reconnect before i get back online.
