I am relatively new to Fedora 15, but used 13 for a while with no issues. Yesterday a windows user put a flash drive into my computer for me to copy something on to. (This may be conincidental.) I then put the computer into suspend or hibernate or whatever and now it won't start up. At all. And I'm stuck as 'everything' I need is on that computer.
View 1 RepliesIm taking the class now in college once a week. My professor said that we need to install any Linux operating systems so I chose Fedora, but he said we need at least 16GB free of space to install it in our computer, sadly i only have 1GB space left remaining. I told him about it and he told me about installing Fedora in my flash drive that has space of 16GB. I really am interested in this course and want to understand all of this stuff so can anyone tell me the process to install Fedora into flash drive so I can boot it anywhere else other than home? Also since he said I need 16GB to install it don't I got to buy 32GB flash drive at least?
View 2 Replies View RelatedI finally got my new internal hdd for my laptop. I plugged it in and installed windows 7 64 bit. Then I partitioned my external hdd (WD mybook 640gb), and installed ubuntu 9.1 on a 200gb partition of it. The problem is that I didn't unplug the internal hdd before I installed ubuntu. Now the computer will not start unless I have the external hard drive plugged in.
So what should I do so that I will be able to go into windows 7 normally if the external hdd is unplugged? I would also like to be able to use ubuntu when I plug in the external hdd. I wouldn't mind having to go to the boot menu and choosing the external hard drive every time I wanted to use ubuntu.
The reason I partitioned the external hard drive was because it has a lot more space than my 250gb internal hdd, and I also wanted to leave space open to use as was intended, to back up stuff.
However, now that I think about it, I wouldn't mind partitioning the internal hdd and just leaving the external blank (which I should have done in the first place).
I'm getting 'File is broken' messages while trying to set up Ubuntu 10.04 on 4GB flash drive. Following instructions on [URL] I downloaded Ubuntu Desktop Edition - 32bit version. It shows up as:
ubuntu-10.04-desktop-i386.iso size on disk 542 MB (568,475,648 bytes)
I downloaded and ran the Universal USB Installer. It shows up as:
Universal-USB-Installer-v1.7.4.exe size on disk 816 KB (835,584 bytes)
I get 56 7-zip Diagnostic messages. A small sample shows:
0 C:Documents and SettingsMy Downloadsubuntu-10.04-desktop-i386.iso
1 Data error in '.diskcasper-uuid-generic'. File is broken
[code]....
Should I download the iso file again, or have I missed something in the install? I'm running Windows XP sp3 on an IBM T60 Thinkpad
So here is my situation: I am unable to boot from a CD I am unable to boot from a Flash Drive I have Ubuntu installed with Wubi, and can boot into it successfully I have a Ubuntu Installation CD I have created a partition into which I'd like to install Ubuntu. Is it possible to boot into my current Wubi Ubuntu installation, and then launch the Ubuntu installer from the installation CD, and then direct this installation to the empty partition I have waiting?
Basically, I think my question is this: Does anybody know what file to run manually from the CD in order to launch the installer?
I am trying to install ubuntu 11.04 from a bootable USB flash drive. As i couldnt create the USB using the inbuilt usb creator which came with the .iso file i had downloaded, i had used universal USB installer to create it. It took a lot of time to created the bootable pendrive.
I had copied the contents of the pendrive thus created to a folder on my hard disk and named it 'PENDRIVE'. Later i had formatted the pendrive and used it for other purposes.
Today, i wanted to install ubuntu on another computer, so i copied the contents of this folder to my pendrive (instead of creating a bootable usb drive using universal USB installer again) and renamed my pendrive as 'PENDRIVE'. But when i tried to boot from it (i had changed the boot order of my computer accordingly) i got this message, 'remove any removable cd or media and press any button to restart'. Until i removed the pendrive my system refused to start and i was unable to install ubuntu. Why did this happen?
I remember a friend of mine was able to get my computer to boot under CUI, and the command 'start x' started the GUI. with booting up my computer through CUI.
View 3 Replies View RelatedComputer Does Not Turn On When Hard Drive Is Connected but when I remove my Hard Drive it works as noramal.
View 13 Replies View RelatedI have Ubuntu running from my flash drive. My wireless connection shows good connection to my router and other routers I have tried; however, when I open Firefox or chrome there is no internet connection.
View 1 Replies View Relateda friend of mine just given me an old 2004 IBM NetVista 8305 desktop and suggested to use Linux Ubuntu which is something new to me. So i installed it via USB memory stick & it works. After installation of the OS I am impressed with functionality & speed. when i conect the external hard drive via usb it doesn't show & i tried my usb flash disc it showed the same problem. I tried both disk in my laptop (Windows XP) & it works.
View 8 Replies View RelatedI have an old computer that I want to turn in to a backup server. I was planning on using a 1 TB drive connected by a SATA card since the motherboard only has PATA. However when looking everything I've found makes it sound like I need to install the card for it to work. I want to know if I can install Debian to the hard drive through the SATA card or not?
View 6 Replies View RelatedI have recently installed Fedora 12 on my pc but I am not able to browse the internet although the network icon shows the computer is connected.
I tried the dig command and got the following message:global options +cmd; connection timed out; servers could not be reached;
How do I get a computer to boot from a USB flash drive with a bootable image when the computers bios does not have a USB device as a boot choice ?
View 1 Replies View RelatedI recently got a new Lenovo netbook and I want to make sure that what happened to my last laptop doesn't happen to this thing. I got the idea from some Windows software called Predator, that uses a flash drive to lock a computer. I also know that most Linux distros already have the required components to facilitate this (i.e, they know when you plug in a flash drive). My question is, how do I get my netbook to run scripts or programs when a flash drive is unplugged? This is how I want it to work: The flash drive would be tethered to my wrist with a short strap (or a piece of fishing line, maybe a chain). When someone yanks the netbook away from me (i.e, a thief), they would rip the drive out of the USB port in the process. The netbook, immediately sensing that the drive is no longer plugged in, runs miscellaneous programs or scripts in an attempt to thwart the thief, like activating the screensaver, adding a password to grub, sounding an alarm, and whatever else I want it to do.
I would eventually like to expand this to bluetooth headsets, and other devices that Linux can keep track of. It also has to fit in with my current setup. I installed Xubuntu 9.10 on the netbook and set it up to use an ext3 formatted flash drive as /home. I then installed truecrypt and created two file containers, one for the flash drive (small files, like assignments for college and app config), and one in a hidden directory on the hard drive in the netbook (large files, like my VirtualBox images).This way, the system won't work right without the flash drive, and I can even switch flash drives in the future, when the one I'm currently using dies. Ideally, the system locking program/script would only check for a USB connected device with a special file on it. If I can get this set up, it would be one of the coolest Linux tricks ever pulled with a netbook, and possibly the basis for an awesome new security tool for mobile users.
My laptop is dual-boot with Windows XP and FC10 co-existing. Yesterday, I wanna re-install FC10, so I formated(deleted) all linux partitions in Windows XP. Disaster happened when i rebooted computer: the computer cannot startup at all?Now, I don't know how to deal with it. I wanna know: what can i do to start up the computer into Windows? In my opinion, computer should work well without one system in dual-boot mode. If you format C: drive on which windows are installed, for instance, the computer can boot into FC10 normally. Why it die deleting FC10?
View 1 Replies View RelatedI downloaded the iso file from fedora's official site and copied the iso to my pendrive... to be able to install Fedora through pen drive i downloaded Universal-USB-Installer-1.8.1.5 and used it locate the iso file in my pen drive... after Universal-USB-Installer-1.8.1.5 did its job, i booted my pc and proceeded to the installation.. there was a 'install on hard disk option' and chose it... it asked me for a new password, my location etc. but when i chose the install option it prompted me an error saying that i dun have enough space to install fedora... how do i locate my drive during installation , so that i cud install it on my desired drive... it shows me two options, one is the pendrive while the other is "AMD something.... "(dun remember the exact name") whenever i select on the AMd.
View 4 Replies View RelatedIs it possible to automatically run a program on a USB Flash drive upon plugging it on a computer?the program should create a text file inside the USB flash drive as i plug it on the computer? Is this possible? how can i do this? autorun.inf doesn't work. Are there any solutions? by the way, i am using kernel 1.0 on my computer...
View 1 Replies View RelatedI'm interested in trying out Fedora but would use it on my current Netbook (an ASUS eeePC 1000HE). I currently have Mandriva on it though which I don't want to stop using.Can I install it on a Flash Drive? If so, would it be in a sense a LiveDVD type of installation or could I actually do an install on the Flash Drive to use it as a Hard Drive? If so, what would the minimum flash drive size be?
Also, if I use the Flash Drive as a hard drive would it still have to use the internal hard drive or can all 3 partitions (swap, root, and home), be on the flash drive? Would it be possible to run it on more than one machine since I also have an Acer Aspire One?
I downloaded the 32 bit Fedora 14 and burned the image to DVD. I didn't want to try to install it on the HDD because the last time I tried to install a distro that used Grub and not Grub2, the only OS I could get into from the boot screen was that OS that I installed with Grub.
I went ahead with the install in hopes that it would see my 4G flash drive, sdc was present so that is where I installed it. I mounted / in sdc1 and the bootloader in sdc. Everything seemed to install, install finished and said I could reboot. On reboot it tried to boot from the USB but just sat there, it never did boot.
[Code]...
I can't modify/delete the files on my phones through my computer which is connected to my phone through a USB wire. I can view the files in there, but not edit them or make any modifications. During the time I used Ubuntu, it worked pretty well, any ideas why it doesn't work.I use Fedora 11 KDE in case you wanted to help me solve this problem. I also have a Nokia 5800 XpressMusic if this is going to help too.
View 4 Replies View RelatedI was wondering if is possible to install the latest Fedora from a flash drive? I have a PC that does not have a CD/DVD unit.
View 3 Replies View RelatedI have Fedora running on my computer at school and have been informed we are getting new computers.
Can I simply move my hard drive to the new computers? I don't have to reinstall do I? Would I have to use a new kernel?
I would like to run a script after I got a network connection. The reason is that I'm trying to install Dropbox on my Fedora 12 laptop, but it only works if I start it after I'm connected to the network. So, is it possible to automatically run a script after you've got the connection?
View 3 Replies View RelatedI'd like to make regular backups of my flash drives, but I don't plug them in regularly. Because of this, I can't just use a scheduled backup application to back them up. Does anyone know of an incremental backup application that will automatically run backups on media as soon as it's mounted?
View 1 Replies View RelatedI am new to Fedora 10 and encountered the following problem. I installed FC10 on an external eSATA hard drive (sdb) on my laptop which already has some other Linux distros on sda. I used a DVD that came with the Fedora 10 Bible, so I can assume that the DVD had no problems. The installation went OK and I got no error messages. I added the following lines to the menu.lst file of the distro that I use to boot all my distros.
title Fedora 10
root (hd1,1)
kernel /boot/vmlinuz-2.6.27.15-170.2.24.fc10.i686 ro root=/dev/sdb2 rhgb quiet
initrd /boot/initrd-2.6.27.15-170.2.24.fc10.i686.img
When I boot Fedora, the blue bar at the bottom of the screen goes half-way, then gives me the error message: "mount: could not find filesystem '/dev/root' "
I am trying to make an iso boot from a 8GB SanDisk Cruzer USB drive through UNetBootin, and it's just not happening. I have tried several times, but always had the same disappointing result. It looks like when UNetBootin goes through the process of putting it on the flash drive, it completely skips aking it bootable. Any suggestions? Maybe it is just UNetBootin.
View 2 Replies View RelatedI have a 4gig usb flash drive that opensuse can not see. I have other usb drives that work fine.
View 10 Replies View RelatedI am having trouble trying to use a 1.44 MB floppy drive on my computer. I have tried to mount the drive on my computer, but all I get is the following message:
Unable to mount location No media in the drive
One post mentioned that if I were to type "id" in a terminal, the floppy would be recognized as "25(floppy)". I tried that, but "25(floppy)" didn't come up.
Also, when I tried using KFloppy to format a floppy disk, I got the following message:
Internal error: device not clearly defined
However, when I used the 'lsmod' and "cat /etc/fstab" commands, they strangely seem to recognize that my computer has a floppy.
I am attaching documentation to this post for analysis. This documentation includes information about a failed attempt to format a disk using Disk Utility. Also, I am using Ubuntu 10.04 (Lucid Lynx) as my operating system.
I just bought a Magellan Triton 400 and installed just about every program with "gps" in the name. When I plug it in and choose "Connect to PC" it stops at the "Waiting to connect" screen. The installed gps programs each reports that no drive is connected. This is my first experience with gps and I'm really perplexed. There are guides to setting up gps with bluetooth, but this is a USB connection.
View 11 Replies View RelatedKingston DataTraveler R3.0 32GB: plugged in
Code: Select all$ uname -a
Linux dsktop 3.2.0-4-486 #1 Debian 3.2.65-1+deb7u2 i686 GNU/Linux
Code: Select all$ lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[CODE]....