Is there a way to stop net access if a vpn is disconnected? I will be using a vpn for all my internet access on a specific machine, but if the connection is dropped, I don't want that box to continue to have access to the net until the vpn is re-established.
View 2 RepliesI am running Ubuntu 10.10 on a brand new laptop, an install done by the company I ordered the notebook from. I have some limited experience with Linux and Ubuntu especially.I know that I'm not connected to a wired network. I haven't so much as plugged in a network cable, but the graphic appears erratically on the right hand side of the screen like I am connecting, then disconnecting. I've tried disabling the eth0 connection altogether, but no dice. I can't figure out how to make it stop.
View 7 Replies View RelatedI have a bit of a "unique" situation here. I have myself plugged into two networks - since we run two networks here at work (long story, we merged and never combined them due to two different companies) and want to block ALL internet access off eth1, and only have it off eth0. I only want traffic from 192.168.67.1-192.168.67.255 allowed on eth1, but everything allowed on eth0. Or is there a way for the internet/applications to be on eth0 instead of eth1? Would I use iptables or something?
View 4 Replies View RelatedI am trying to give access to ONE single user to start and shutdown tomcat server. The problem being, when I enter syntax: username ALL= /etc/init.d/tomcat5, /usr/local/tomcat/webapps, PASSWD:ALL This gives the user access to start and stop tomcat but also gives user access to start and stop other services within /etc/init.d - such as httpd etc... What is the proper way to give user access to start and stop service, and limiting that power to only one service....
View 2 Replies View RelatedI've fully updated F11 running on my laptop. I've BCM4312 in my machine. The issue is that the wireless connection gets disconnected so often that it's irritating my like hell.
View 4 Replies View RelatedI'm having problems with my Internet. I just recently downloaded 10.04 (went from 8.04) and now I can't get online! I could yesterday! I don't have access to the router, but the internet works great on all my Windows computers. On my panel it show's my wireless connection bars with an exclamation mark and says disconnected. I don't know what to do! It's a Toshiba Satellite computer.
Also, I can't update anything, or install anything because I don't have direct access to the router. I know there is a lot of information about this problem already, but everything I've seen needs me to download new drivers. If you know how to do it from one computer to another I can do that. I'm just not very techy.
This morning I connected to internet, using the 'hidden network' feature of Ubuntu, like I always do. In the beginning it worked well, but after a while, while playing a game, I got disconnected. As I closed this game, I discovered that Ubuntu was asking for the WPA key (it was already filled out correctly) There were no changes made in the network while I was playing. My brother and his girlfriend can both connect using their Windows 7 laptops, so the network itself should be allright.
View 4 Replies View RelatedWifi getting disconnected very frequently in Fedora 10. I am facing issues in my Toshiba satellite laptop, after a fresh install of fedora - 10. After the install, The wi fi connection is dropping off very often, and even on keeping wpa_supplicant and wifiroamd in "active" state, the connectivity needs to be established manually.
[root@dipan dipan]# rpm -qa | grep -e kernel -e kmod | sort
kernel-2.6.27.5-117.fc10.i686
kernel-firmware-2.6.27.5-117.fc10.noarch
kerneloops-0.12-1.fc10.i386 .....
I use a t-mobile usb mobile broadband stick; model usb stick 120.
the signal strength is 3g yet i randomly get disconnected from the likes of
pidgin
amsn messenger
ebuddy
can anyone tell me why, or how to fix it
Everything worked fine until I downloaded some Ubuntu upgrades. Now, every time I try to connect to internet via network manager it says: " Network: Disconnected - you are now offline". so what to do...
View 9 Replies View RelatedI am quite new to Ubuntu, so please give me easy to follow steps.So, I have just installed Ubuntu 10.10 x64, but cant get my wireless to work. It detects my networks and tries to connect to them - infinitely, whithout success.I have tried it on an unprotected and on a WPA2-personal protected network with the same results.My card is a RaLink rt3090.
View 7 Replies View RelatedThe title message appears when I log in. Neither wired nor wireless network adapters show in ifconfig output. Network manager shows a simple networking disabled greyed out message. Both adapters work in live cd boot. Everything was working properly before; I'm not sure what happened.
View 3 Replies View RelatedIs there anyway I could use KISMET without getting disconnected from a network. I mean now whenever I start kismet, I lose my network connectivity. I dont want that. is there any possible workaround for this?
View 3 Replies View RelatedIm using Ubuntu netbook remix on my wife's hp mini. Ever since I switched my router out this netbook will connect to my wireless network, then show a disconnected icon, yet the internet still seems to work. I've searched around and seen that other people have had this issue but I haven't seen anything on how to resolve it.
View 3 Replies View RelatedI'm having network problems and I have no idea how to fix it. At first, my internet connection was suffering on all computers on my network (Mac, Windows and Ubuntu 11,04). So, I disconnected my cable-modem and then reconnected. Nothing.... So, I rebooted my Windows machine and the internet came back on that computer.
I then went to my Ubuntu computer and clicked on "auto eth0" (per the way I interpreted instructions from the internet). The symbol turned from the "two arrows" to what looks like a wireless, looking for a signal. I thought that maybe I should just reboot, as I did with Windows. However, when I did reboot, that same wireless symbol was there, then a message came up saying:
Code:
Wired Network: You are now disconnected
I can't seem to get my internet connection back on my Ubuntu computer, though it is working on every other computer on my network.
cisco vpn client 4.8.5 I have no problem to connect it, but got disconnected every minute after I opened a terminal and ssh to company's server. Not sure what's causing the problem. There's no problem to connect to windows.
View 2 Replies View RelatedI have installed Fedora 13 and updated it. I simply cant use ssh to connect to this Fedora, not even locally. I have enabled port22 in firewall settings and nothing. Tried to disable firewall completely and nothing. I have disabled SELinux (not sure if it has something to do with this, but... ) and nothing. Entered "ALL: ALL" in /etc/hosts.allow and still nothing. Dont know what to do anymore.
Here is what happens when I try to ssh to this machine, even from it:
[flibio@surf ~]$ ssh localhost
warning: Need basic cursor movement capability, using vt100
flibio's password:
Authentication successful.
Disconnected; connection lost (Connection closed.).
Connection to localhost closed.
[flibio@surf ~]$
Looking into Services > sshd and it says "This service is dead."
So I tried:
[root@surf etc]# service sshd restart
Stopping sshd: [FAILED]
Starting sshd: : OpenSSH_5.4p1 on
: FATAL: Creating listener failed: port 22 probably already in use! .....
And still I get disconnected whenever I try to ssh to this machine from anywhere. Services says that sshd is allways dead, even restarting it but I can only restart it by doing a pkill sshd before.
i am using broadcom wireless (4312) on my laptop with FC15 and configured it using [URL]. initially it ran great without any problem (for a week). but from yesterday, every 15 minutes or so, my wifi started getting disconnected, showing the wireless login screen . I can reconnect only by rebooting or restarting network manager service.
View 6 Replies View RelatedI recently installed Ubuntu. I just installed ndiswrapper so I could install my wireless PCI [COLOR=blue ! important][COLOR=blue ! important]card [COLOR=blue ! important]drivers[/COLOR][/COLOR][/COLOR]
I did that and it is recognized and so is the network I want to connect to. But for some reason, it just wont connect. It will spend a long time trying to connect, but then just says "disconnected". It's not like I have a bad connection or anything. My internet on Windows is fast.
Since I have started to use Ubuntu 9.10, I have had multiple wireless connection troubles. First of all, it says the signal is 2 bars, when in fact my router is right next to me as of right now. Second of all, when I try to connect to it, it asks for my password 3 times, then says disconnected. I'm on a hardwire right now, it's across my keyboard, and I'm in a tangled mess.
View 2 Replies View RelatedI'm running Ubuntu Karmic Server with Xfce desktop, the problem is the network manager, it says it is disconnected, even though I am connected to my network and getting an internet connection. It wouldn't normally bother me, but I'm trying to setup a VPN using the network-manager-openvpn plugin. I put in the required details for the VPN connection, but as soon as I tick the "apply to all users" box, the information is lost. The information will remain if I don't tick that box, but it will not connect. when I try to select the VPN connection I just setup, nothing happens.
I've tried the exact same configuration on another desktop, running Ubuntu Karmic with Gnome desktop, the network manager works fine, my ethernet connection is showing as connected, and I can connect to the VPN no problem, the problem lies with the network manager in Xfce. Is there anyway I can get it to show as connected? it wont allow me to connect to the VPN otherwise, it's silly, because that adapter has a full working network connection.
Ive installed 10.04 on my laptop and notebook. It works perfectly on laptop. On notebook the problem is it finds no Wireless network and just says disconnected. I have no idea how to connect it, I tried reinstalling Ubuntu but no luck. I tried looking it up on internet but no luck in finding help. its an MSI U130. The wireless is defently turned on.
View 7 Replies View RelatedI installed xubunto 10.4 on my pc the other day and every thing was working fine and then the next day my wired network card went down. So I restarted it and it say Wired Network Disconnected. I tried doing sudo ifconfig eht0 up to try and bring the card back online but nothing happens. I also tried reinstalling xubuntu on my computer. Again my internet works then starts freezing up so I restart it and my ethernet card goes down again. I have tried also plugging it into the second ether net port on my computer but that does not seem to work. Also I went into my dhclient-script and went to the bottom to look at my network card stuff.
It reads
#Changed from 'ifconfig $interface inet 0 down' - see Debian bug #144666 ifconfig $interface inet 0
exit_with_hooks 2 "$@"
fi
I tuned on my netbook and my wireless signal had a red exclamation.
Wireless is enabled.
Wireless Networks shows disconnected
I don't get it. Can't seem to get it to connect? How? If I open the connection information I can see the wifi networks around me. And edit/add/delete. But when I go back to the signal and click. it just shows wireless network disconnected and no option to connect. What to do? I have restarted the computer, router, cable modem, etc. Done the updates.
i used to download files using transmission bit torrent client. I download the torrent and once the download starts i will leave the system and check only after 4 or 5 hours later.But when i check the system again, the network connections were automatically disconnected.The download is getting stopped naturally. why my wired network connection is getting disconnected automatically if the system is idle?(ubuntu 10.10)
View 1 Replies View RelatedI have a Hp pavillion dv2000 and i installed Ubuntu 10.10 the wireless works really fine and fast until i decided to buy a windows vista and installed it, i didn't know that installing windows would affect other OS already installed, after installing vista I installed Ubuntu 10.10 again and the wireless wont detect anything and it would say on the wireless option 'discinnected' and the wireless led light stays orange instead of blue.How do I fix this problem??
View 2 Replies View RelatedI have successfully installed xubuntu on my 2nd partition of hard disk through unetbootin. everything works fine except wireless network. my ethernet works good, i am tethering through my android mobile no problem....just wireless says disconnected where as it is enabled. As far I know its sould scan all the available wireless AP near me and it should appear below wireless networks, and from there I should be able to select the AP which I want to connct...
Here are some commands log
My netbook is MSI wind U135DX
My Ubuntu when i start it up, go to the wireless networks , try to connect to my network it trys to connect stops than says disconnected. My internet card is a Cisco Aironet wireless (idk the model number)
View 1 Replies View RelatedI just installed Ubuntu 10.04, complete noob, but I can't connect to the internet. I connect the ethernet cable, select auto ethernet and the icon animates for about 30 seconds. But then I get a notification "Wired network Disconnected - you are now offline".
Don't know what other information I should provide. I tried a few things from different posts like editing the dhcpclient.config but don't really know what I'm doing and none of these worked anyways. I'm not even sure if they were solutions to a similar problem! I'm using the same connection on my Mac OS 10.4.11 (different machine) and I have no problems. Could I use these same settiings in Ubuntu? I don't know what the different fields represent or what I should input in manual settings.
I have a simple server running Ubuntu Server. Usually the server connects to the network by Wifi, so there is usually no cable connected to the Ethernet port. I noticed that there is a dhclient3 running on eth0 anyway. It is causing undesirable disk activity. Obviously, it is never going to get a response as long as no cable is connected. I can kill the responsible process manually, but I wonder first what is starting the process and how I can prevent it from being started. If there is a way to get the server to boot without starting this process, I wonder whether this is the right solution. Connecting to the network by Ethernet is the failsafe when Wifi doesn't work. I guess what I would like to see would be a way for the server to detect when eth0 does not have a cable connected and not start dhclient in that case, but to activate dhclient when a cable is connected.
View 4 Replies View Related